FreeBSD The Power to Serve

FreeBSD 10.0-RELEASE Errata

Abstract

This document lists errata items for FreeBSD 10.0-RELEASE, containing significant information discovered after the release or too late in the release cycle to be otherwise included in the release documentation. This information includes security advisories, as well as news relating to the software or documentation that could affect its operation or usability. An up-to-date version of this document should always be consulted before installing this version of FreeBSD.

This errata document for FreeBSD 10.0-RELEASE will be maintained until the release of FreeBSD 10.1-RELEASE.

Table of Contents

Introduction

This errata document contains "late-breaking news" about FreeBSD 10.0-RELEASE Before installing this version, it is important to consult this document to learn about any post-release discoveries or problems that may already have been found and fixed.

Any version of this errata document actually distributed with the release (for example, on a CDROM distribution) will be out of date by definition, but other copies are kept updated on the Internet and should be consulted as the "current errata" for this release. These other copies of the errata are located at http://www.FreeBSD.org/releases/, plus any sites which keep up-to-date mirrors of this location.

Source and binary snapshots of FreeBSD 10.0-STABLE also contain up-to-date copies of this document (as of the time of the snapshot).

For a list of all FreeBSD CERT security advisories, see http://www.FreeBSD.org/security/ or ftp://ftp.FreeBSD.org/pub/FreeBSD/CERT/.

Security Advisories

Advisory Date Topic

SA-13:14.openssh

19 November 2013

OpenSSH AES-GCM memory corruption vulnerability

SA-14:01.bsnmpd

14 January 2014

bsnmpd remote denial of service vulnerability

SA-14:02.ntpd

14 January 2014

ntpd distributed reflection Denial of Service vulnerability

SA-14:03.openssl

14 January 2014

OpenSSL multiple vulnerabilities

SA-14:04.bind

14 January 2014

BIND remote denial of service vulnerability

SA-14:05.nfsserver

8 April 2014

Deadlock in the NFS server

SA-14:06.openssl

8 April 2014

OpenSSL multiple vulnerabilities

SA-14:07.devfs

30 April 2014

Fix devfs rules not applied by default for jails

SA-14:08.tcp

30 April 2014

Fix TCP reassembly vulnerability

SA-14:09.openssl

30 April 2014

Fix OpenSSL use-after-free vulnerability

SA-14:10.openssl

15 May 2014

Fix OpenSSL NULL pointer deference vulnerability

SA-14:11.sendmail

3 June 2014

Fix sendmail improper close-on-exec flag handling

SA-14:13.pam

3 June 2014

Fix incorrect error handling in PAM policy parser

SA-14:14.openssl

5 June 2014

Multiple vulnerabilities

SA-14:15.iconv

24 June 2014

NULL pointer dereference and out-of-bounds array access

SA-14:16.file

24 June 2014

Multiple vulnerabilities

SA-14:17.kmem

8 July 2014

Kernel memory disclosure in control messages and SCTP notifications

SA-14:18.openssl

9 September 2014

Multiple vulnerabilities

SA-14:19.tcp

16 September 2014

Denial of Service in TCP packet processing.

Open Issues

  • FreeBSD/i386 10.0-RELEASE running as a guest operating system on VirtualBox can have a problem with disk I/O access. It depends on some specific hardware configuration and does not depend on a specific version of VirtualBox or host operating system.

    It causes various errors and makes FreeBSD quite unstable. Although the cause is still unclear, disabling unmapped I/O works as a workaround. To disable it, choose Escape to loader prompt in the boot menu and enter the following lines from loader(8) prompt, after an OK:

    set vfs.unmapped_buf_allowed=0
boot

    Note that the following line has to be added to /boot/loader.conf after a boot. It disables unmapped I/O at every boot:

    vfs.unmapped_buf_allowed=0

    [2014-04-03 update] It has been reported that instability may be present on virtual machines running on other hypervisors, such as Xen or KVM.

  • A bug in Heimdal (an implementation of Kerberos authentication in FreeBSD base system) has been fixed. It could cause an interoperability issue between Heimdal and the other implementations including MIT Kerberos. However, due to this fix, Heimdal and some applications which depend on it in the previous FreeBSD releases do not work with one in 10.0-RELEASE in certain cases. Errata Notice for the supported releases to fix it will be released.

  • A bug in killall(1) has been discovered. It makes killall -INT to deliver SIGTERM rather than the desired SIGINT, and may cause blocking behavior for scripts that uses it, as -I means "interactive". A workaround of this would be to use -SIGINT instead. This bug has been fixed on FreeBSD-CURRENT and will be fixed in FreeBSD 10.0-STABLE.

  • The bxe(4) driver can cause packet corruption when TSO (TCP Segmentation Offload) feature is enabled. This feature is enabled by default and can be disabled by using a -tso parameter of ifconfig(8). It can be specified in rc.conf(5) like the following:

    ifconfig_bxe0="DHCP -tso"

    This bug has been fixed on FreeBSD 10.0-STABLE.

  • Due to a minor incompatibility with pkg(7) version 1.2.x, bsdconfig(8) will duplicate the list of available packages for installation. This is due to the PACKAGESITE environment variable being set for backwards compatibility with older versions of pkg(7). This affects generation of the available package list only, and does not affect the behavior when processing packages for installation.

  • A regression in pw(8) does not remove a user from groups not specified in the provided group list when the -G flag is used. This is expected to be corrected in FreeBSD-CURRENT and FreeBSD 10.0-STABLE.

  • ipfw(8) fwd action can send packets to the correct interface with a wrong link-layer address when the route is updated. This bug has been fixed on FreeBSD-CURRENT and will be fixed in FreeBSD 10.0-STABLE.

  • The mount_udf(8) utility has a bug which prevents it from mounting any UDF file system. This has been fixed in FreeBSD-CURRENT and FreeBSD 10.0-STABLE.

  • Updating LSI firmware on mps(4) controllers with the sas2flash utility may cause the system to hang, or may cause the system to panic. This is fixed in the stable/10 branch with revisions r262553 and r262575, and will be included in FreeBSD 10.1-RELEASE.

Late-Breaking News

No news.

Last modified on: January 26, 2021 by Sergio Carlavilla Delgado