5.3. Contributed Software

Contributed by Poul-Henning Kamp, David O'Brien and Gavin Atkinson.

Some parts of the FreeBSD distribution consist of software that is actively being maintained outside the FreeBSD project. For historical reasons, we call this contributed software. Some examples are sendmail, gcc and patch.

Over the last couple of years, various methods have been used in dealing with this type of software and all have some number of advantages and drawbacks. No clear winner has emerged.

Since this is the case, after some debate one of these methods has been selected as the official method and will be required for future imports of software of this kind. Furthermore, it is strongly suggested that existing contributed software converge on this model over time, as it has significant advantages over the old method, including the ability to easily obtain diffs relative to the official versions of the source by everyone (even without direct repository access). This will make it significantly easier to return changes to the primary developers of the contributed software.

Ultimately, however, it comes down to the people actually doing the work. If using this model is particularly unsuited to the package being dealt with, exceptions to these rules may be granted only with the approval of the core team and with the general consensus of the other developers. The ability to maintain the package in the future will be a key issue in the decisions.

Note:

Because it makes it harder to import future versions minor, trivial and/or cosmetic changes are strongly discouraged on files that are still tracking the vendor branch.

5.3.1. Vendor Imports with SVN

Contributed by Dag-Erling Smørgrav.

This section describes the vendor import procedure with Subversion in details.

  1. Preparing the Tree

    If this is your first import after the switch to SVN, you will have to flatten and clean up the vendor tree, and bootstrap merge history in the main tree. If not, you can safely omit this step.

    During the conversion from CVS to SVN, vendor branches were imported with the same layout as the main tree. For example, the foo vendor sources ended up in vendor/foo/dist/contrib/foo, but it is pointless and rather inconvenient. What we really want is to have the vendor source directly in vendor/foo/dist, like this:

    % cd vendor/foo/dist/contrib/foo
    % svn move $(svn list) ../..
    % cd ../..
    % svn remove contrib
    % svn propdel -R svn:mergeinfo
    % svn commit

    Note that, the propdel bit is necessary because starting with 1.5, Subversion will automatically add svn:mergeinfo to any directory you copy or move. In this case, you will not need this information, since you are not going to merge anything from the tree you deleted.

    Note:

    You may want to flatten the tags as well. The procedure is exactly the same. If you do this, put off the commit until the end.

    Check the dist tree and perform any cleanup that is deemed to be necessary. You may want to disable keyword expansion, as it makes no sense on unmodified vendor code. In some cases, it can be even be harmful.

    % svn propdel svn:keywords -R .
    % svn commit

    Bootstrapping of svn:mergeinfo on the target directory (in the main tree) to the revision that corresponds to the last change was made to the vendor tree prior to importing new sources is also needed:

    % cd head/contrib/foo
    % svn merge --record-only svn_base/vendor/foo/dist@12345678 .
    % svn commit

    where svn_base is the base directory of your SVN repository, e.g. svn+ssh://svn.FreeBSD.org/base.

  2. Importing New Sources

    Prepare a full, clean tree of the vendor sources. With SVN, we can keep a full distribution in the vendor tree without bloating the main tree. Import everything but merge only what is needed.

    Note that you will need to add any files that were added since the last vendor import, and remove any that were removed. To facilitate this, you should prepare sorted lists of the contents of the vendor tree and of the sources you are about to import:

    % cd vendor/foo/dist
    % svn list -R | grep -v '/$' | sort > ../old
    % cd ../foo-9.9
    % find . -type f | cut -c 3- | sort > ../new

    With these two files, the following command will list list removed files (files only in old):

    % comm -23 ../old ../new

    While the command below will list added files (files only in new):

    % comm -13 ../old ../new

    Let's put this together:

    % cd vendor/foo/foo-9.9
    % tar cf - . | tar xf - -C ../dist
    % cd ../dist
    % comm -23 ../old ../new | xargs svn remove
    % comm -13 ../old ../new | xargs svn add

    Warning:

    If there are new directories in the new distribution, the last command will fail. You will have to add the directories, and run it again. Conversely, if any directories were removed, you will have to remove them manually.

    Check properties on any new files:

    • All text files should have svn:eol-style set to native.

    • All binary files should have svn:mime-type set to application/octet-stream, unless there is a more appropriate media type.

    • Executable files should have svn:executable set to *.

    • There should be no other properties on any file in the tree.

    Note:

    You are ready to commit, but you should first check the output of svn stat and svn diff to make sure everything is in order.

    Once you have committed the new vendor release, you should tag it for future reference. The best and quickest way is to do it directly in the repository:

    % svn copy svn_base/vendor/foo/dist svn_base/vendor/foo/9.9

    To get the new tag, you can update your working copy of vendor/foo.

    Note:

    If you choose to do the copy in the checkout instead, do not forget to remove the generated svn:mergeinfo as described above.

  3. Merging to -HEAD

    After you have prepared your import, it is time to merge. Option --accept=postpone tells SVN not to handle merge conflicts yet, because they will be taken care of manually:

    % cd head/contrib/foo
    % svn update
    % svn merge --accept=postpone svn_base/vendor/foo/dist

    Resolve any conflicts, and make sure that any files that were added or removed in the vendor tree have been properly added or removed in the main tree. It is always a good idea to check differences against the vendor branch:

    % svn diff --no-diff-deleted --old=svn_base/vendor/foo/dist --new=.

    The --no-diff-deleted option tells SVN not to check files that are in the vendor tree but not in the main tree.

    Note:

    With SVN, there is no concept of on or off the vendor branch. If a file that previously had local modifications no longer does, just remove any left-over cruft, such as FreeBSD version tags, so it no longer shows up in diffs against the vendor tree.

    If any changes are required for the world to build with the new sources, make them now — and test until you are satisfied that everything build and runs correctly.

  4. Commit

    Now, you are ready to commit. Make sure you get everything in one go. Ideally, you would have done all steps in a clean tree, in which case you can just commit from the top of that tree. That is the best way to avoid surprises. If you do it properly, the tree will move atomically from a consistent state with the old code to a consistent state with the new code.

All FreeBSD documents are available for download at http://ftp.FreeBSD.org/pub/FreeBSD/doc/

Questions that are not answered by the documentation may be sent to <freebsd-questions@FreeBSD.org>.
Send questions about this document to <freebsd-doc@FreeBSD.org>.