Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
AS(1)			     GNU Development Tools			 AS(1)

NAME
       AS - the	portable GNU assembler.

SYNOPSIS
       as [-a[cdhlns][=file]] [-D] [--defsym sym=val]
	[-f] [--gstabs]	[--gstabs+] [--gdwarf2]	[--help]
	[-I dir] [-J] [-K] [-L]
	[--listing-lhs-width=NUM] [--listing-lhs-width2=NUM]
	[--listing-rhs-width=NUM] [--listing-cont-lines=NUM]
	[--keep-locals]	[-o objfile] [-R] [--statistics] [-v]
	[-version] [--version] [-W] [--warn] [--fatal-warnings]
	[-w] [-x] [-Z] [--target-help] [target-options]
	[--|files ...]

       Target Alpha options:
	  [-mcpu]
	  [-mdebug | -no-mdebug]
	  [-relax] [-g]	[-Gsize]
	  [-F] [-32addr]

       Target ARC options:
	  [-marc[5|6|7|8]]
	  [-EB|-EL]

       Target ARM options:
	  [-mcpu=processor[+extension...]]
	  [-march=architecture[+extension...]]
	  [-mfpu=floating-point-format]
	  [-mfloat-abi=abi]
	  [-mthumb]
	  [-EB|-EL]
	  [-mapcs-32|-mapcs-26|-mapcs-float|
	   -mapcs-reentrant]
	  [-mthumb-interwork] [-moabi] [-k]

       Target CRIS options:
	  [--underscore	| --no-underscore]
	  [--pic] [-N]
	  [--emulation=criself | --emulation=crisaout]

       Target D10V options:
	  [-O]

       Target D30V options:
	  [-O|-n|-N]

       Target i386 options:
	  [--32|--64] [-n]

       Target i960 options:
	  [-ACA|-ACA_A|-ACB|-ACC|-AKA|-AKB|
	   -AKC|-AMC]
	  [-b] [-no-relax]

       Target IP2K options:
	  [-mip2022|-mip2022ext]

       Target M32R options:
	  [--m32rx|--[no-]warn-explicit-parallel-conflicts|
	  --W[n]p]

       Target M680X0 options:
	  [-l] [-m68000|-m68010|-m68020|...]

       Target M68HC11 options:
	  [-m68hc11|-m68hc12|-m68hcs12]
	  [-mshort|-mlong]
	  [-mshort-double|-mlong-double]
	  [--force-long-branchs] [--short-branchs]
	  [--strict-direct-mode] [--print-insn-syntax]
	  [--print-opcodes] [--generate-example]

       Target MCORE options:
	  [-jsri2bsr] [-sifilter] [-relax]
	  [-mcpu=[210|340]]

       Target MIPS options:
	  [-nocpp] [-EL] [-EB] [-O[optimization	level]]
	  [-g[debug level]] [-G	num] [-KPIC] [-call_shared]
	  [-non_shared]	[-xgot]	[--membedded-pic]
	  [-mabi=ABI] [-32] [-n32] [-64] [-mfp32] [-mgp32]
	  [-march=CPU] [-mtune=CPU] [-mips1] [-mips2]
	  [-mips3] [-mips4] [-mips5] [-mips32] [-mips32r2]
	  [-mips64] [-mips64r2]
	  [-construct-floats] [-no-construct-floats]
	  [-trap] [-no-break] [-break] [-no-trap]
	  [-mfix7000] [-mno-fix7000]
	  [-mips16] [-no-mips16]
	  [-mips3d] [-no-mips3d]
	  [-mdmx] [-no-mdmx]
	  [-mdebug] [-no-mdebug]
	  [-mpdr] [-mno-pdr]

       Target MMIX options:
	  [--fixed-special-register-names] [--globalize-symbols]
	  [--gnu-syntax] [--relax] [--no-predefined-symbols]
	  [--no-expand]	[--no-merge-gregs] [-x]
	  [--linker-allocated-gregs]

       Target PDP11 options:
	  [-mpic|-mno-pic] [-mall] [-mno-extensions]
	  [-mextension|-mno-extension]
	  [-mcpu] [-mmachine]

       Target picoJava options:
	  [-mb|-me]

       Target PowerPC options:
	  [-mpwrx|-mpwr2|-mpwr|-m601|-mppc|-mppc32|-m603|-m604|
	   -m403|-m405|-mppc64|-m620|-mppc64bridge|-mbooke|
	   -mbooke32|-mbooke64]
	  [-mcom|-many|-maltivec] [-memb]
	  [-mregnames|-mno-regnames]
	  [-mrelocatable|-mrelocatable-lib]
	  [-mlittle|-mlittle-endian|-mbig|-mbig-endian]
	  [-msolaris|-mno-solaris]

       Target SPARC options:
	  [-Av6|-Av7|-Av8|-Asparclet|-Asparclite
	   -Av8plus|-Av8plusa|-Av9|-Av9a]
	  [-xarch=v8plus|-xarch=v8plusa] [-bump]
	  [-32|-64]

       Target TIC54X options:
	[-mcpu=54[123589]|-mcpu=54[56]lp] [-mfar-mode|-mf]
	[-merrors-to-file _filename_|-me _filename_]

       Target Xtensa options:
	[--[no-]density] [--[no-]relax]	[--[no-]generics]
	[--[no-]text-section-literals]
	[--[no-]target-align] [--[no-]longcalls]

DESCRIPTION
       GNU as is really	a family of assemblers.	 If you	use (or	have used) the
       GNU assembler on	one architecture, you should find a fairly similar en-
       vironment  when	you  use it on another architecture.  Each version has
       much in common with the others, including object	file formats, most as-
       sembler directives (often called	pseudo-ops) and	assembler syntax.

       as  is  primarily intended to assemble the output of the	GNU C compiler
       "gcc" for use by	the linker "ld".  Nevertheless,	we've tried to make as
       assemble	 correctly  everything	that other assemblers for the same ma-
       chine would assemble.  Any exceptions are documented explicitly.	  This
       doesn't	mean  as  always uses the same syntax as another assembler for
       the same	architecture; for example, we  know  of	 several  incompatible
       versions	of 680x0 assembly language syntax.

       Each  time  you	run  as	 it assembles exactly one source program.  The
       source program is made up of one	or more	files.	(The standard input is
       also a file.)

       You give	as a command line that has zero	or more	input file names.  The
       input files are read (from left file name to right).   A	 command  line
       argument	 (in  any position) that has no	special	meaning	is taken to be
       an input	file name.

       If you give as no file names it attempts	to read	one  input  file  from
       the  as	standard input,	which is normally your terminal.  You may have
       to type ctl-D to	tell as	there is no more program to assemble.

       Use -- if you need to explicitly	name the standard input	file  in  your
       command line.

       If the source is	empty, as produces a small, empty object file.

       as  may	write  warnings	 and error messages to the standard error file
       (usually	your terminal).	 This should not happen	when  a	compiler  runs
       as  automatically.  Warnings report an assumption made so that as could
       keep assembling a flawed	program; errors	report a  grave	 problem  that
       stops the assembly.

       If  you are invoking as via the GNU C compiler, you can use the -Wa op-
       tion to pass arguments through to the assembler.	 The  assembler	 argu-
       ments  must  be separated from each other (and the -Wa) by commas.  For
       example:

	       gcc -c -g -O -Wa,-alh,-L	file.c

       This passes two options to the assembler: -alh (emit a listing to stan-
       dard  output  with high-level and assembly source) and -L (retain local
       symbols in the symbol table).

       Usually you do not need to use this -Wa mechanism, since	many  compiler
       command-line  options  are automatically	passed to the assembler	by the
       compiler.  (You can call	the GNU	compiler driver	with the -v option  to
       see  precisely what options it passes to	each compilation pass, includ-
       ing the assembler.)

OPTIONS
       -a[cdhlmns]
	   Turn	on listings, in	any of a variety of ways:

	   -ac omit false conditionals

	   -ad omit debugging directives

	   -ah include high-level source

	   -al include assembly

	   -am include macro expansions

	   -an omit forms processing

	   -as include symbols

	   =file
	       set the name of the listing file

	   You may combine these options; for example, use -aln	 for  assembly
	   listing  without forms processing.  The =file option, if used, must
	   be the last one.  By	itself,	-a defaults to -ahls.

       -D  Ignored.  This option is accepted  for  script  compatibility  with
	   calls to other assemblers.

       --defsym	sym=value
	   Define the symbol sym to be value before assembling the input file.
	   value must be an integer constant.  As in C,	a leading 0x indicates
	   a hexadecimal value,	and a leading 0	indicates an octal value.

       -f  ``fast''---skip whitespace and comment preprocessing	(assume	source
	   is compiler output).

       --gstabs
	   Generate stabs debugging information	for each assembler line.  This
	   may help debugging assembler	code, if the debugger can handle it.

       --gstabs+
	   Generate  stabs debugging information for each assembler line, with
	   GNU extensions that probably	only gdb can handle,  and  that	 could
	   make	 other	debuggers  crash or refuse to read your	program.  This
	   may help debugging assembler	code.  Currently the only  GNU	exten-
	   sion	is the location	of the current working directory at assembling
	   time.

       --gdwarf2
	   Generate DWARF2 debugging  information  for	each  assembler	 line.
	   This	 may help debugging assembler code, if the debugger can	handle
	   it.	Note---this option is only supported by	some targets, not  all
	   of them.

       --help
	   Print a summary of the command line options and exit.

       --target-help
	   Print a summary of all target specific options and exit.

       -I dir
	   Add directory dir to	the search list	for ".include" directives.

       -J  Don't warn about signed overflow.

       -K  Issue  warnings  when  difference tables altered for	long displace-
	   ments.

       -L
       --keep-locals
	   Keep	(in the	symbol table) local  symbols.	On  traditional	 a.out
	   systems  these  start  with L, but different	systems	have different
	   local label prefixes.

       --listing-lhs-width=number
	   Set the maximum width, in words, of the output data column  for  an
	   assembler listing to	number.

       --listing-lhs-width2=number
	   Set the maximum width, in words, of the output data column for con-
	   tinuation lines in an assembler listing to number.

       --listing-rhs-width=number
	   Set the maximum width of an input source line, as  displayed	 in  a
	   listing, to number bytes.

       --listing-cont-lines=number
	   Set	the  maximum number of lines printed in	a listing for a	single
	   line	of input to number + 1.

       -o objfile
	   Name	the object-file	output from as objfile.

       -R  Fold	the data section into the text section.

       --statistics
	   Print the maximum space (in bytes) and total	time (in seconds) used
	   by assembly.

       --strip-local-absolute
	   Remove local	absolute symbols from the outgoing symbol table.

       -v
       -version
	   Print the as	version.

       --version
	   Print the as	version	and exit.

       -W
       --no-warn
	   Suppress warning messages.

       --fatal-warnings
	   Treat warnings as errors.

       --warn
	   Don't suppress warning messages or treat them as errors.

       -w  Ignored.

       -x  Ignored.

       -Z  Generate an object file even	after errors.

       -- | files ...
	   Standard input, or source files to assemble.

       The  following  options	are available when as is configured for	an ARC
       processor.

       -marc[5|6|7|8]
	   This	option selects the core	processor variant.

       -EB | -EL
	   Select either big-endian (-EB) or little-endian (-EL) output.

       The following options are available when	as is configured for  the  ARM
       processor family.

       -mcpu=processor[+extension...]
	   Specify which ARM processor variant is the target.

       -march=architecture[+extension...]
	   Specify which ARM architecture variant is used by the target.

       -mfpu=floating-point-format
	   Select which	Floating Point architecture is the target.

       -mfloat-abi=abi
	   Select which	floating point ABI is in use.

       -mthumb
	   Enable Thumb	only instruction decoding.

       -mapcs-32 | -mapcs-26 | -mapcs-float | -mapcs-reentrant | -moabi
	   Select which	procedure calling convention is	in use.

       -EB | -EL
	   Select either big-endian (-EB) or little-endian (-EL) output.

       -mthumb-interwork
	   Specify  that the code has been generated with interworking between
	   Thumb and ARM code in mind.

       -k  Specify that	PIC code has been generated.

       See the info pages for documentation of the CRIS-specific options.

       The following options are available when	as is configured  for  a  D10V
       processor.

       -O  Optimize output by parallelizing instructions.

       The  following  options	are available when as is configured for	a D30V
       processor.

       -O  Optimize output by parallelizing instructions.

       -n  Warn	when nops are generated.

       -N  Warn	when a nop after a 32-bit multiply instruction is generated.

       The following options are available when	as is configured for the Intel
       80960 processor.

       -ACA | -ACA_A | -ACB | -ACC | -AKA | -AKB | -AKC	| -AMC
	   Specify which variant of the	960 architecture is the	target.

       -b  Add code to collect statistics about	branches taken.

       -no-relax
	   Do  not  alter  compare-and-branch  instructions for	long displace-
	   ments; error	if necessary.

       The following options are available when	as is configured for the  Ubi-
       com IP2K	series.

       -mip2022ext
	   Specifies that the extended IP2022 instructions are allowed.

       -mip2022
	   Restores  the  default behaviour, which restricts the permitted in-
	   structions to just the basic	IP2022 ones.

       The following options are available when	as is configured for the Rene-
       sas M32R	(formerly Mitsubishi M32R) series.

       --m32rx
	   Specify  which processor in the M32R	family is the target.  The de-
	   fault is normally the M32R, but  this  option  changes  it  to  the
	   M32RX.

       --warn-explicit-parallel-conflicts or --Wp
	   Produce  warning messages when questionable parallel	constructs are
	   encountered.

       --no-warn-explicit-parallel-conflicts or	--Wnp
	   Do not produce warning messages  when  questionable	parallel  con-
	   structs are encountered.

       The  following  options are available when as is	configured for the Mo-
       torola 68000 series.

       -l  Shorten references to undefined symbols, to	one  word  instead  of
	   two.

       -m68000 | -m68008 | -m68010 | -m68020 | -m68030
       | -m68040 | -m68060 | -m68302 | -m68331 | -m68332
       | -m68333 | -m68340 | -mcpu32 | -m5200
	   Specify  what processor in the 68000	family is the target.  The de-
	   fault is normally the 68020,	but this can be	changed	at  configura-
	   tion	time.

       -m68881 | -m68882 | -mno-68881 |	-mno-68882
	   The	target machine does (or	does not) have a floating-point	copro-
	   cessor.  The	default	is to assume a coprocessor for	68020,	68030,
	   and	cpu32.	 Although  the	basic 68000 is not compatible with the
	   68881, a combination	of the two can be specified, since it's	possi-
	   ble	to  do emulation of the	coprocessor instructions with the main
	   processor.

       -m68851 | -mno-68851
	   The target machine does (or does not) have a	memory-management unit
	   coprocessor.	 The default is	to assume an MMU for 68020 and up.

       For  details  about  the	PDP-11 machine dependent features options, see
       @ref{PDP-11-Options}.

       -mpic | -mno-pic
	   Generate position-independent (or  position-dependent)  code.   The
	   default is -mpic.

       -mall
       -mall-extensions
	   Enable all instruction set extensions.  This	is the default.

       -mno-extensions
	   Disable all instruction set extensions.

       -mextension | -mno-extension
	   Enable (or disable) a particular instruction	set extension.

       -mcpu
	   Enable  the	instruction  set  extensions supported by a particular
	   CPU,	and disable all	other extensions.

       -mmachine
	   Enable the instruction set extensions supported by a	particular ma-
	   chine model,	and disable all	other extensions.

       The  following  options are available when as is	configured for a pico-
       Java processor.

       -mb Generate ``big endian'' format output.

       -ml Generate ``little endian'' format output.

       The following options are available when	as is configured for  the  Mo-
       torola 68HC11 or	68HC12 series.

       -m68hc11	| -m68hc12 | -m68hcs12
	   Specify  what  processor  is	the target.  The default is defined by
	   the configuration option when building the assembler.

       -mshort
	   Specify to use the 16-bit integer ABI.

       -mlong
	   Specify to use the 32-bit integer ABI.

       -mshort-double
	   Specify to use the 32-bit double ABI.

       -mlong-double
	   Specify to use the 64-bit double ABI.

       --force-long-branchs
	   Relative branches are turned	into absolute ones. This concerns con-
	   ditional  branches,	unconditional  branches	 and branches to a sub
	   routine.

       -S | --short-branchs
	   Do not turn relative	branchs	into absolute ones when	the offset  is
	   out of range.

       --strict-direct-mode
	   Do  not  turn  the  direct addressing mode into extended addressing
	   mode	when the instruction does not support direct addressing	mode.

       --print-insn-syntax
	   Print the syntax of instruction in case of error.

       --print-opcodes
	   print the list of instructions with syntax and then exit.

       --generate-example
	   print an example of instruction for each possible  instruction  and
	   then	exit.  This option is only useful for testing as.

       The following options are available when	as is configured for the SPARC
       architecture:

       -Av6 | -Av7 | -Av8 | -Asparclet | -Asparclite
       -Av8plus	| -Av8plusa | -Av9 | -Av9a
	   Explicitly select a variant of the SPARC architecture.

	   -Av8plus and	-Av8plusa select a 32 bit environment.	-Av9 and -Av9a
	   select a 64 bit environment.

	   -Av8plusa and -Av9a enable the SPARC	V9 instruction set with	Ultra-
	   SPARC extensions.

       -xarch=v8plus | -xarch=v8plusa
	   For compatibility with the Solaris v9 assembler.  These options are
	   equivalent to -Av8plus and -Av8plusa, respectively.

       -bump
	   Warn	when the assembler switches to another architecture.

       The following options are available when	as is configured for the 'c54x
       architecture.

       -mfar-mode
	   Enable extended addressing mode.   All  addresses  and  relocations
	   will	assume extended	addressing (usually 23 bits).

       -mcpu=CPU_VERSION
	   Sets	the CPU	version	being compiled for.

       -merrors-to-file	FILENAME
	   Redirect  error  output  to	a file,	for broken systems which don't
	   support such	behaviour in the shell.

       The following options are available when	as is configured  for  a  MIPS
       processor.

       -G num
	   This	 option	 sets the largest size of an object that can be	refer-
	   enced implicitly with the "gp" register.  It	is only	 accepted  for
	   targets that	use ECOFF format, such as a DECstation running Ultrix.
	   The default value is	8.

       -EB Generate ``big endian'' format output.

       -EL Generate ``little endian'' format output.

       -mips1
       -mips2
       -mips3
       -mips4
       -mips5
       -mips32
       -mips32r2
       -mips64
       -mips64r2
	   Generate code for a particular MIPS	Instruction  Set  Architecture
	   level.  -mips1 is an	alias for -march=r3000,	-mips2 is an alias for
	   -march=r6000, -mips3	is an alias for	-march=r4000 and -mips4	is  an
	   alias  for  -march=r8000.  -mips5, -mips32, -mips32r2, -mips64, and
	   -mips64r2 correspond	to generic MIPS	V, MIPS32, MIPS32  Release  2,
	   MIPS64, and MIPS64 Release 2	ISA processors,	respectively.

       -march=CPU
	   Generate code for a particular MIPS cpu.

       -mtune=cpu
	   Schedule and	tune for a particular MIPS cpu.

       -mfix7000
       -mno-fix7000
	   Cause  nops	to be inserted if the read of the destination register
	   of an mfhi or mflo instruction occurs in the	following two instruc-
	   tions.

       -mdebug
       -no-mdebug
	   Cause  stabs-style debugging	output to go into an ECOFF-style .mde-
	   bug section instead of the standard ELF .stabs sections.

       -mpdr
       -mno-pdr
	   Control generation of ".pdr"	sections.

       -mgp32
       -mfp32
	   The register	sizes are normally inferred from the ISA and ABI,  but
	   these  flags	force a	certain	group of registers to be treated as 32
	   bits	wide at	all times.  -mgp32 controls the	size  of  general-pur-
	   pose	 registers and -mfp32 controls the size	of floating-point reg-
	   isters.

       -mips16
       -no-mips16
	   Generate code for the MIPS 16 processor.   This  is	equivalent  to
	   putting   ".set   mips16"  at  the  start  of  the  assembly	 file.
	   -no-mips16 turns off	this option.

       -mips3d
       -no-mips3d
	   Generate code for the MIPS-3D Application Specific Extension.  This
	   tells  the  assembler  to  accept MIPS-3D instructions.  -no-mips3d
	   turns off this option.

       -mdmx
       -no-mdmx
	   Generate code for the MDMX Application  Specific  Extension.	  This
	   tells  the  assembler  to accept MDMX instructions.	-no-mdmx turns
	   off this option.

       --construct-floats
       --no-construct-floats
	   The --no-construct-floats option disables the construction of  dou-
	   ble width floating point constants by loading the two halves	of the
	   value into the two single width floating point registers that  make
	   up the double width register.  By default --construct-floats	is se-
	   lected, allowing construction of these floating point constants.

       --emulation=name
	   This	option causes as to emulate as configured for some other  tar-
	   get,	in all respects, including output format (choosing between ELF
	   and ECOFF only), handling of	pseudo-opcodes which may generate  de-
	   bugging  information	or store symbol	table information, and default
	   endianness.	The available configuration names are: mipsecoff, mip-
	   self, mipslecoff, mipsbecoff, mipslelf, mipsbelf.  The first	two do
	   not alter the default endianness from that of  the  primary	target
	   for	which  the assembler was configured; the others	change the de-
	   fault to little- or big-endian as indicated by the b	or  l  in  the
	   name.   Using  -EB or -EL will override the endianness selection in
	   any case.

	   This	option is currently supported only when	the primary target  as
	   is  configured for is a MIPS	ELF or ECOFF target.  Furthermore, the
	   primary target or others  specified	with  --enable-targets=...  at
	   configuration  time	must  include support for the other format, if
	   both	are to be available.  For example, the	Irix  5	 configuration
	   includes support for	both.

	   Eventually, this option will	support	more configurations, with more
	   fine-grained	control	over the assembler's  behavior,	 and  will  be
	   supported for more processors.

       -nocpp
	   as  ignores this option.  It	is accepted for	compatibility with the
	   native tools.

       --trap
       --no-trap
       --break
       --no-break
	   Control how to deal with multiplication overflow  and  division  by
	   zero.  --trap or --no-break (which are synonyms) take a trap	excep-
	   tion	(and only work for Instruction Set Architecture	 level	2  and
	   higher); --break or --no-trap (also synonyms, and the default) take
	   a break exception.

       -n  When	this option is used, as	will issue a  warning  every  time  it
	   generates a nop instruction from a macro.

       The  following options are available when as is configured for an MCore
       processor.

       -jsri2bsr
       -nojsri2bsr
	   Enable or disable the JSRI to BSR transformation.  By default  this
	   is  enabled.	  The  command	line option -nojsri2bsr	can be used to
	   disable it.

       -sifilter
       -nosifilter
	   Enable or disable the silicon filter	behaviour.  By default this is
	   disabled.   The  default can	be overridden by the -sifilter command
	   line	option.

       -relax
	   Alter jump instructions for long displacements.

       -mcpu=[210|340]
	   Select the cpu type on the target hardware.	 This  controls	 which
	   instructions	can be assembled.

       -EB Assemble for	a big endian target.

       -EL Assemble for	a little endian	target.

       See the info pages for documentation of the MMIX-specific options.

       The following options are available when	as is configured for an	Xtensa
       processor.

       --density | --no-density
	   Enable or disable use of instructions from the Xtensa code  density
	   option.   This is enabled by	default	when the Xtensa	processor sup-
	   ports the code density option.

       --relax | --no-relax
	   Enable or disable instruction relaxation.  This is enabled  by  de-
	   fault.   Note:  In  the  current implementation, these options also
	   control whether assembler optimizations are performed, making these
	   options equivalent to --generics and	--no-generics.

       --generics | --no-generics
	   Enable  or disable all assembler transformations of Xtensa instruc-
	   tions.  The default is --generics;  --no-generics  should  be  used
	   only	 in  the  rare	cases when the instructions must be exactly as
	   specified in	the assembly source.

       --text-section-literals | --no-text-section-literals
	   With	--text-section-literals, literal pools are interspersed	in the
	   text	 section.   The	 default  is --no-text-section-literals, which
	   places literals in a	separate section in the	output file.

       --target-align |	--no-target-align
	   Enable or disable automatic alignment to reduce branch penalties at
	   the expense of some code density.  The default is --target-align.

       --longcalls | --no-longcalls
	   Enable  or  disable	transformation	of  call instructions to allow
	   calls  across  a  greater  range  of	 addresses.   The  default  is
	   --no-longcalls.

SEE ALSO
       gcc(1), ld(1), and the Info entries for binutils	and ld.

COPYRIGHT
       Copyright  (C)  1991,  92, 93, 94, 95, 96, 97, 98, 99, 2000, 2001, 2002
       Free Software Foundation, Inc.

       Permission is granted to	copy, distribute and/or	modify	this  document
       under  the  terms of the	GNU Free Documentation License,	Version	1.1 or
       any later version published by the Free Software	 Foundation;  with  no
       Invariant  Sections,  with no Front-Cover Texts,	and with no Back-Cover
       Texts.  A copy of the license is	included in the	section	entitled ``GNU
       Free Documentation License''.

binutils-2.15			  2004-05-17				 AS(1)

NAME | SYNOPSIS | DESCRIPTION | OPTIONS | SEE ALSO | COPYRIGHT

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=zpu-elf-as&sektion=1&manpath=FreeBSD+12.0-RELEASE+and+Ports>

home | help