Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages


home | help
ZPOOL-STATUS(8)		FreeBSD	System Manager's Manual	       ZPOOL-STATUS(8)

     zpool-status -- show detailed health status for ZFS storage pools

     zpool status [-DigLpPstvx]	[-T u|d] [-c [SCRIPT1[,SCRIPT2]a|]] [pool]a|
	   [interval [count]]

     Displays the detailed health status for the given pools.  If no pool is
     specified,	then the status	of each	pool in	the system is displayed.  For
     more information on pool and device health, see the Device	Failure	and
     Recovery section of zpoolconcepts(7).

     If	a scrub	or resilver is in progress, this command reports the percent-
     age done and the estimated	time to	completion.  Both of these are only
     approximate, because the amount of	data in	the pool and the other work-
     loads on the system can change.

     -c	[SCRIPT1[,SCRIPT2]a|]
	     Run a script (or scripts) on each vdev and	include	the output as
	     a new column in the zpool status output.  See the -c option of
	     zpool iostat for complete details.

     -i	     Display vdev initialization status.

     -g	     Display vdev GUIDs	instead	of the normal device names These GUIDs
	     can be used in place of device names for the zpool	detach/off-
	     line/remove/replace commands.

     -L	     Display real paths	for vdevs resolving all	symbolic links.	 This
	     can be used to look up the	current	block device name regardless
	     of	the /dev/disk/ path used to open it.

     -p	     Display numbers in	parsable (exact) values.

     -P	     Display full paths	for vdevs instead of only the last component
	     of	the path.  This	can be used in conjunction with	the -L flag.

     -D	     Display a histogram of deduplication statistics, showing the al-
	     located (physically present on disk) and referenced (logically
	     referenced	in the pool) block counts and sizes by reference

     -s	     Display the number	of leaf	VDEV slow IOs.	This is	the number of
	     IOs that didn't complete in zio_slow_io_ms	milliseconds (default
	     30	seconds).  This	does not necessarily mean the IOs failed to
	     complete, just took an unreasonably long amount of	time.  This
	     may indicate a problem with the underlying	storage.

     -t	     Display vdev TRIM status.

     -T	u|d  Display a time stamp.  Specify u for a printed representation of
	     the internal representation of time.  See time(2).	 Specify d for
	     standard date format.  See	date(1).

     -v	     Displays verbose data error information, printing out a complete
	     list of all data errors since the last complete pool scrub.

     -x	     Only display status for pools that	are exhibiting errors or are
	     otherwise unavailable.  Warnings about pools not using the	latest
	     on-disk format will not be	included.

     zpool-events(8), zpool-history(8),	zpool-iostat(8), zpool-list(8),
     zpool-resilver(8),	zpool-scrub(8),	zpool-wait(8)

FreeBSD	13.0			 June 2, 2021			  FreeBSD 13.0


Want to link to this manual page? Use this URL:

home | help