Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
ZPOOL-REPLACE(8)	FreeBSD	System Manager's Manual	      ZPOOL-REPLACE(8)

NAME
     zpool-replace -- replace one device with another in ZFS storage pool

SYNOPSIS
     zpool replace [-fsw] [-o property=value] pool device [new-device]

DESCRIPTION
     Replaces device with new-device.  This is equivalent to attaching
     new-device, waiting for it	to resilver, and then detaching	device.	 Any
     in	progress scrub will be cancelled.

     The size of new-device must be greater than or equal to the minimum size
     of	all the	devices	in a mirror or raidz configuration.

     new-device	is required if the pool	is not redundant.  If new-device is
     not specified, it defaults	to device.  This form of replacement is	useful
     after an existing disk has	failed and has been physically replaced.  In
     this case,	the new	disk may have the same /dev path as the	old device,
     even though it is actually	a different disk.  ZFS recognizes this.

     -f	     Forces use	of new-device, even if it appears to be	in use.	 Not
	     all devices can be	overridden in this manner.

     -o	property=value
	     Sets the given pool properties.  See the zpoolprops(7) manual
	     page for a	list of	valid properties that can be set.  The only
	     property supported	at the moment is ashift.

     -s	     The new-device is reconstructed sequentially to restore redun-
	     dancy as quickly as possible.  Checksums are not verified during
	     sequential	reconstruction so a scrub is started when the resilver
	     completes.	 Sequential reconstruction is not supported for	raidz
	     configurations.

     -w	     Waits until the replacement has completed before returning.

SEE ALSO
     zpool-detach(8), zpool-initialize(8), zpool-online(8), zpool-resilver(8)

FreeBSD	13.0			 May 29, 2021			  FreeBSD 13.0

NAME | SYNOPSIS | DESCRIPTION | SEE ALSO

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=zpool-replace&sektion=8&manpath=FreeBSD+13.1-RELEASE+and+Ports>

home | help