Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
XTERM(1)		    General Commands Manual		      XTERM(1)

NAME
       xterm - terminal	emulator for X

SYNOPSIS
       xterm [-toolkitoption ...] [-option ...]	[shell]

DESCRIPTION
       The  xterm  program is a	terminal emulator for the X Window System.  It
       provides	DEC VT102/VT220	(VTxxx)	and Tektronix 4014  compatible	termi-
       nals  for  programs that	cannot use the window system directly.	If the
       underlying operating system  supports  terminal	resizing  capabilities
       (for  example,  the  SIGWINCH  signal  in systems derived from 4.3bsd),
       xterm will use the facilities to	notify programs	running	in the	window
       whenever	it is resized.

       The  VTxxx  and	Tektronix 4014 terminals each have their own window so
       that you	can edit text in one and look at graphics in the other at  the
       same  time.   To	maintain the correct aspect ratio (height/width), Tek-
       tronix graphics will be restricted to the largest  box  with  a	4014's
       aspect  ratio  that will	fit in the window.  This box is	located	in the
       upper left area of the window.

       Although	both windows may be displayed at the same time,	one of them is
       considered  the ``active'' window for receiving keyboard	input and ter-
       minal output.  This is the window that contains the text	 cursor.   The
       active  window  can  be	chosen	through	 escape	 sequences,  the  ``VT
       Options'' menu in the VTxxx window, and the ``Tek Options'' menu	in the
       4014 window.

EMULATIONS
       The  VT102  emulation  is fairly	complete, but does not support autore-
       peat.  Double-size characters  are  displayed  properly	if  your  font
       server  supports	 scalable fonts.  The VT220 emulation does not support
       soft fonts, it is otherwise complete.   Termcap(5)  entries  that  work
       with  xterm  include  an	 optional  platform-specific entry, ``xterm,''
       ``vt102,'' ``vt100'' and	``ansi,'' and ``dumb.''	  xterm	 automatically
       searches	the termcap file in this order for these entries and then sets
       the ``TERM'' and	the ``TERMCAP''	environment variables.	You  may  also
       use  ``vt220,''	 but  must  set	 the terminal emulation	level with the
       decTerminalID resource.	(The ``TERMCAP'' environment variable  is  not
       set  if xterm is	linked against a terminfo library, since the requisite
       information is not  provided  by	 the  termcap  emulation  of  terminfo
       libraries).

       Many  of	 the special xterm features may	be modified under program con-
       trol through a set of escape  sequences	different  from	 the  standard
       VT102 escape sequences.	(See the Xterm Control Sequences document.)

       The  Tektronix  4014 emulation is also fairly good.  It supports	12-bit
       graphics	addressing, scaled to the window size.	 Four  different  font
       sizes and five different	lines types are	supported.  There is no	write-
       through or defocused mode support.  The	Tektronix  text	 and  graphics
       commands	 are recorded internally by xterm and may be written to	a file
       by sending the COPY escape sequence (or through the Tektronix menu; see
       below).	 The  name  of	the  file will be ``COPYyyyy-MM-dd.hh:mm:ss'',
       where yyyy, MM, dd, hh, mm and ss  are  the  year,  month,  day,	 hour,
       minute  and  second when	the COPY was performed (the file is created in
       the directory xterm is started in, or the home directory	 for  a	 login
       xterm).

       Not all of the features described in this manual	are necessarily	avail-
       able in this version of xterm.  Some (e.g., the	non-VT220  extensions)
       are  available only if they were	compiled in, though the	most commonly-
       used are	in the default configuration.

OTHER FEATURES
       Xterm automatically highlights the text cursor when the pointer	enters
       the  window  (selected) and unhighlights	it when	the pointer leaves the
       window (unselected).  If	the window is the focus	window,	then the  text
       cursor is highlighted no	matter where the pointer is.

       In VT102	mode, there are	escape sequences to activate and deactivate an
       alternate screen	buffer,	which is the same size as the display area  of
       the  window.   When activated, the current screen is saved and replaced
       with the	alternate screen.  Saving of lines scrolled off	the top	of the
       window is disabled until	the normal screen is restored.	The termcap(5)
       entry for xterm allows the visual editor	vi(1) to switch	to the	alter-
       nate  screen  for  editing  and to restore the screen on	exit.  A popup
       menu entry makes	it simple to switch between the	normal	and  alternate
       screens for cut and paste.

       In either VT102 or Tektronix mode, there	are escape sequences to	change
       the name	of the windows.	 Additionally, in VT102	mode, xterm implements
       the window-manipulation control sequences from dtterm, such as resizing
       the window, setting its location	on the screen.

       Xterm allows character-based applications to receive mouse events (cur-
       rently  button-press  and  release events, and button-motion events) as
       keyboard	control	sequences.  See	Xterm Control Sequences	for details.

OPTIONS
       The xterm terminal emulator accepts the standard	X Toolkit command line
       options	as  well  as many application-specific options.	 If the	option
       begins with a `+' instead of a `-',  the	 option	 is  restored  to  its
       default	value.	The -version and -help options are interpreted even if
       xterm cannot open the display, and are useful for testing and  configu-
       ration scripts:

       -version
	       This  causes  xterm  to	print a	version	number to the standard
	       output.

       -help   This causes xterm to print out a	verbose	message	describing its
	       options,	 one per line.	The message is written to the standard
	       output.	Xterm generates	this message, sorting  it  and	noting
	       whether a "-option" or a	"+option" turns	the feature on or off,
	       since some features historically	have been one  or  the	other.
	       Xterm  generates	 a  concise help message (multiple options per
	       line) when an unknown option is used, e.g.,
		    xterm -z

	       If the logic for	a particular option such  as  logging  is  not
	       compiled	 into xterm, the help text for that option also	is not
	       displayed by the	-help option.

       One parameter (after all	options) may be	given.	That overrides xterm's
       built-in	 choice	 of  shell  program.   Normally	xterm checks the SHELL
       variable.  If that is not set, xterm tries to  use  the	shell  program
       specified  in  the  password  file.   If	 that  is  not set, xterm uses
       /bin/sh.	 If the	parameter names	an executable file,  xterm  uses  that
       instead.	  The parameter	must be	an absolute path, or name a file found
       on the user's PATH (and thereby construct an absolute  path).   The  -e
       option  cannot be used with this	parameter since	it uses	all parameters
       following the option.

       The other options are used to control the appearance and	behavior.  Not
       all options are necessarily configured into your	copy of	xterm:

       -132    Normally,  the  VT102  DECCOLM  escape  sequence	 that switches
	       between 80 and 132 column mode is ignored.  This	option	causes
	       the  DECCOLM  escape  sequence  to be recognized, and the xterm
	       window will resize appropriately.

       -ah     This option indicates that xterm	should	always	highlight  the
	       text cursor.  By	default, xterm will display a hollow text cur-
	       sor whenever the	focus is lost or the pointer leaves  the  win-
	       dow.

       +ah     This  option  indicates	that xterm should do text cursor high-
	       lighting	based on focus.

       -ai     This option disables active icon	support	if  that  feature  was
	       compiled	 into  xterm.  This is equivalent to setting the vt100
	       resource	activeIcon to ``false''.

       +ai     This option enables active icon support	if  that  feature  was
	       compiled	 into  xterm.  This is equivalent to setting the vt100
	       resource	activeIcon to ``true''.

       -aw     This option indicates that auto-wraparound should  be  allowed.
	       This  allows  the cursor	to automatically wrap to the beginning
	       of the next line	when when it is	at the rightmost position of a
	       line and	text is	output.

       +aw     This  option  indicates	that  auto-wraparound  should  not  be
	       allowed.

       -b number
	       This option specifies the size of the inner  border  (the  dis-
	       tance  between  the outer edge of the characters	and the	window
	       border) in pixels.  That	is the vt100 internalBorder  resource.
	       The default is 2.

       +bc     turn  off text cursor blinking.	This overrides the cursorBlink
	       resource.

       -bc     turn on text cursor blinking.  This overrides  the  cursorBlink
	       resource.

       -bcf milliseconds
	       set the amount of time text cursor is off when blinking via the
	       cursorOffTime resource.

       -bcn milliseconds
	       set the amount of time text cursor is on	when blinking via  the
	       cursorOffTime resource.

       -bdc    Set  the	vt100 resource colorBDMode to ``false'', disabling the
	       display of characters with bold attribute as color

       +bdc    Set the vt100 resource colorBDMode to  ``true'',	 enabling  the
	       display	of characters with bold	attribute as color rather than
	       bold

       -cb     Set the vt100 resource cutToBeginningOfLine to ``false''.

       +cb     Set the vt100 resource cutToBeginningOfLine to ``true''.

       -cc characterclassrange:value[,...]
	       This sets classes indicated by the given	ranges	for  using  in
	       selecting  by  words.   See  the	 section  specifying character
	       classes.	 and discussion	of the charClass resource.

       -cjk_width
	       Set the cjkWidth	resource to ``true''.  When turned on, charac-
	       ters  with  East	 Asian Ambiguous (A) category in UTR 11	have a
	       column width of 2.  Otherwise, they have	a column width	of  1.
	       This may	be useful for some legacy CJK text terminal-based pro-
	       grams assuming box drawings and others to have a	 column	 width
	       of  2.  It also has to be turned	on when	you specify a TrueType
	       CJK double-width	(bi-width/monospace) font either with  -fa  at
	       the   command  line  or	faceName  resource.   The  default  is
	       ``false''

       +cjk_width
	       Reset the cjkWidth resource.

       -class string
	       This option allows you  to  override  xterm's  resource	class.
	       Normally	 it is ``XTerm'', but can be set to another class such
	       as ``UXTerm'' to	override selected resources.

       -cm     This option disables recognition	of  ANSI  color-change	escape
	       sequences.  It sets the colorMode resource to ``false''.

       +cm     This  option  enables  recognition  of ANSI color-change	escape
	       sequences.  This	is the same as the vt100 resource colorMode.

       -cn     This option indicates that newlines should not be cut in	 line-
	       mode selections.	 It sets the cutNewline	resource to ``false''.

       +cn     This  option indicates that newlines should be cut in line-mode
	       selections.  It sets the	cutNewline resource to ``true''.

       -cr color
	       This option specifies the color to use for  text	 cursor.   The
	       default	is  to	use the	same foreground	color that is used for
	       text.  It sets the cursorColor resource according to the	param-
	       eter.

       -cu     This  option  indicates	that xterm should work around a	bug in
	       the more(1) program that	causes it to incorrectly display lines
	       that  are exactly the width of the window and are followed by a
	       line beginning with a tab (the leading tabs are not displayed).
	       This option is so named because it was originally thought to be
	       a bug in	the curses(3x) cursor motion package.

       +cu     This option indicates that xterm	should	not  work  around  the
	       more(1) bug mentioned above.

       -dc     This option disables the	escape sequence	to change dynamic col-
	       ors: the	vt100 foreground and background	colors,	its text  cur-
	       sor color, the pointer cursor foreground	and background colors,
	       the Tektronix emulator foreground and  background  colors,  its
	       text  cursor  color  and	 highlight color.  The option sets the
	       dynamicColors option to ``false''.

       +dc     This option enables the escape sequence to change dynamic  col-
	       ors.  The option	sets the dynamicColors option to ``true''.

       -e program [ arguments ... ]
	       This  option  specifies the program (and	its command line argu-
	       ments) to be run	in the xterm window.  It also sets the	window
	       title  and  icon	 name  to be the basename of the program being
	       executed	if neither -T nor -n are given on  the	command	 line.
	       This must be the	last option on the command line.

       -en encoding
	       This  option  determines	 the encoding on which xterm runs.  It
	       sets the	locale resource.  Encodings other than UTF-8 are  sup-
	       ported by using luit.  The -lc option should be used instead of
	       -en for systems with locale support.

       -fb font
	       This option specifies a font to be used	when  displaying  bold
	       text.   This font must be the same height and width as the nor-
	       mal font.  If only one of the normal or bold  fonts  is	speci-
	       fied, it	will be	used as	the normal font	and the	bold font will
	       be produced by overstriking this	font.  The default  is	to  do
	       overstriking  of	 the  normal font.  See	also the discussion of
	       boldFont	and boldMode resources.

       -fa pattern
	       This option sets	 the  pattern  for  fonts  selected  from  the
	       FreeType	 library if support for	that library was compiled into
	       xterm.  This corresponds	to the faceName	resource.  When	a  CJK
	       double-width  font  is  specified, you also need	to turn	on the
	       cjkWidth	resource.

       -fbb    This option indicates that xterm	should compare normal and bold
	       fonts  bounding	boxes  to ensure they are compatible.  It sets
	       the freeBoldBox resource	to ``false''.

       +fbb    This option indicates that xterm	should not compare normal  and
	       bold  fonts  bounding  boxes to ensure they are compatible.  It
	       sets the	freeBoldBox resource to	``true''.

       -fbx    This option indicates that xterm	should	not  assume  that  the
	       normal  and  bold fonts have VT100 line-drawing characters.  If
	       any are missing,	xterm will draw	the characters	directly.   It
	       sets the	forceBoxChars resource to ``false''.

       +fbx    This  option indicates that xterm should	assume that the	normal
	       and bold	fonts have VT100 line-drawing characters.  It sets the
	       forceBoxChars resource to ``true''.

       -fd pattern
	       This  option  sets  the pattern for double-width	fonts selected
	       from the	FreeType library if support for	that library was  com-
	       piled  into  xterm.  This corresponds to	the faceNameDoublesize
	       resource.

       -fi font
	       This option sets	the font for active icons if that feature  was
	       compiled	 into  xterm.  See also	the discussion of the iconFont
	       resource.

       -fs size
	       This option sets	the pointsize  for  fonts  selected  from  the
	       FreeType	 library if support for	that library was compiled into
	       xterm.  This corresponds	to the faceSize	resource.

       -fw font
	       This option specifies the font to be used for  displaying  wide
	       text.   By default, it will attempt to use a font twice as wide
	       as the font that	will be	used to	draw normal text.  If no  dou-
	       blewidth	 font  is  found, it will improvise, by	stretching the
	       normal font.  This corresponds to the wideFont resource.

       -fwb font
	       This option specifies the font to be used for  displaying  bold
	       wide  text.  By default,	it will	attempt	to use a font twice as
	       wide as the font	that will be used to draw bold	text.	If  no
	       doublewidth font	is found, it will improvise, by	stretching the
	       bold font.  This	corresponds to the wideBoldFont	resource.

       -fx font
	       This option specifies the font to be used  for  displaying  the
	       preedit string in the "OverTheSpot" input method.  See also the
	       discussion of the ximFont resource.

       -hc color
	       This option specifies the color to use for  the	background  of
	       selected	 or  otherwise	highlighted  text.   If	not specified,
	       reverse video is	used.  See the discussion  of  the  highlight-
	       Color resource.

       -hf     This  option indicates that HP Function Key escape codes	should
	       be generated for	function keys.	 It  sets  the	hpFunctionKeys
	       resource	to ``true''.

       +hf     This  option indicates that HP Function Key escape codes	should
	       not be generated	for function keys.  It sets the	hpFunctionKeys
	       resource	to ``false''.

       -hold   Turn  on	 the  hold  resource, i.e., xterm will not immediately
	       destroy its window when the shell command completes.   It  will
	       wait  until you use the window manager to destroy/kill the win-
	       dow, or if you use the menu entries that	send a	signal,	 e.g.,
	       HUP or KILL.

       +hold   Turn  off  the  hold  resource,	i.e.,  xterm  will immediately
	       destroy its window when the shell command completes.

       -ie     Turn on the ptyInitialErase resource, i.e., use the pseudo-ter-
	       minal's sense of	the stty erase value.

       +ie     Turn off	the ptyInitialErase resource, i.e., set	the stty erase
	       value using the kb string from the termcap entry	 as  a	refer-
	       ence, if	available.

       -im     Turn  on	the useInsertMode resource, which forces use of	insert
	       mode by adding appropriate entries to the  TERMCAP  environment
	       variable.

       +im     Turn off	the useInsertMode resource.

       -into windowId
	       Given  an  X  window identifier (a decimal integer), xterm will
	       reparent	its top-level shell widget to that  window.   This  is
	       used to embed xterm within other	applications.

       -j      This  option indicates that xterm should	do jump	scrolling.  It
	       corresponds to the  jumpScroll  resource.   Normally,  text  is
	       scrolled	 one  line at a	time; this option allows xterm to move
	       multiple	lines at a time	so  that  it  does  not	 fall  as  far
	       behind.	 Its  use is strongly recommended since	it makes xterm
	       much faster when	scanning through large amounts of  text.   The
	       VT100 escape sequences for enabling and disabling smooth	scroll
	       as well as the ``VT Options'' menu can be  used	to  turn  this
	       feature on or off.

       +j      This option indicates that xterm	should not do jump scrolling.

       -k8     This   option   sets   the   allowC1Printable  resource.	  When
	       allowC1Printable	is set,	xterm overrides	the mapping of C1 con-
	       trol characters (code 128-159) to treat them as printable.

       +k8     This option resets the allowC1Printable resource.

       -kt keyboardtype
	       This  option  sets  the keyboardType resource.  Possible	values
	       include:	``unknown'', ``default'', ``hp'', ``sco'', ``sun'' and
	       ``vt220''.

	       The  value ``unknown'', causes the corresponding	resource to be
	       ignored.

	       The value  ``default'',	suppresses  the	 associated  resources
	       hpFunctionKeys,	scoFunctionKeys,  sunFunctionKeys  and sunKey-
	       board, using the	Sun/PC keyboard	layout.

       -l      Turn logging on.	 Normally logging is  not  supported,  due  to
	       security	 concerns.   Some  versions  of	xterm may have logging
	       enabled.	 The logfile is	written	to the	directory  from	 which
	       xterm is	invoked.  The filename is generated, of	the form

		    XtermLog.XXXXXX

	       or

		    Xterm.log.hostname.yyyy.mm.dd.hh.mm.ss.XXXXXX

	       depending on how	xterm was built.

       +l      Turn logging off.

       -lc     Turn  on	 support  of various encodings according to the	users'
	       locale setting, i.e., LC_ALL,  LC_CTYPE,	 or  LANG  environment
	       variables.   This  is  achieved by turning on UTF-8 mode	and by
	       invoking	luit  for  conversion  between	locale	encodings  and
	       UTF-8.	(luit  is  not invoked in UTF-8	locales.)  This	corre-
	       sponds to the locale resource.

	       The actual list of encodings which are supported	is  determined
	       by  luit.   Consult  the	 luit manual page for further details.
	       See also	the discussion of the -u8 option which supports	 UTF-8
	       locales.

       +lc     Turn  off  support  of automatic	selection of locale encodings.
	       Conventional 8bit mode or, in UTF-8 locales or with -u8 option,
	       UTF-8 mode will be used.

       -lcc path
	       File  name  for the encoding converter from/to locale encodings
	       and UTF-8 which is used with -lc	 option	 or  locale  resource.
	       This corresponds	to the localeFilter resource.

       -leftbar
	       Force  scrollbar	to the left side of VT100 screen.  This	is the
	       default,	unless you have	set the	rightScrollBar resource.

       -lf filename
	       Specify the log-filename.  See the -l option.

       -ls     This option indicates that the shell that  is  started  in  the
	       xterm  window  will be a	login shell (i.e., the first character
	       of argv[0] will be a dash, indicating  to  the  shell  that  it
	       should read the user's .login or	.profile).

	       The  -ls	 flag and the loginShell resource are ignored if -e is
	       also given, because xterm does not know how to make  the	 shell
	       start  the  given  command  after whatever it does when it is a
	       login shell - the user's	shell of choice	need not be  a	Bourne
	       shell  after all.  Also,	xterm -e is supposed to	provide	a con-
	       sistent functionality for other applications that need to start
	       text-mode  programs  in	a  window,  and	if loginShell were not
	       ignored,	the result of ~/.profile might interfere with that.

	       If you do want the effect of -ls	and -e simultaneously, you may
	       get away	with something like
		      xterm -e /bin/bash -l -c "my command here"

	       Finally,	 -ls  is  not completely ignored, because xterm	-ls -e
	       does write a /etc/wtmp entry (if	configured to do so),  whereas
	       xterm -e	does not.

       +ls     This option indicates that the shell that is started should not
	       be a login shell	(i.e., it will be a normal ``subshell'').

       -mb     This option indicates that xterm	should ring a margin bell when
	       the  user  types	near the right end of a	line.  This option can
	       be turned on and	off from the ``VT Options'' menu.

       +mb     This option indicates that margin bell should not be rung.

       -mc milliseconds
	       This option specifies  the  maximum  time  between  multi-click
	       selections.

       -mesg   Turn  off the messages resource,	i.e., disallow write access to
	       the terminal.

       +mesg   Turn on the messages resource, i.e., allow write	access to  the
	       terminal.

       -mk_width
	       Set  the	 mkWidth resource to ``true''.	This makes xterm use a
	       built-in	version	of the wide-character width calculation.   The
	       default is ``false''

       +mk_width
	       Reset the mkWidth resource.

       -ms color
	       This option specifies the color to be used for the pointer cur-
	       sor.  The default is to use the foreground  color.   This  sets
	       the pointerColor	resource.

       -nb number
	       This  option  specifies the number of characters	from the right
	       end of a	line at	which the margin bell, if enabled, will	 ring.
	       The default is 10.

       -nul    This option disables the	display	of underlining.

       +nul    This option enables the display of underlining.

       -pc     This  option enables the	PC-style use of	bold colors (see bold-
	       Colors resource).

       +pc     This option disables the	PC-style use of	bold colors.

       -pob    This option indicates that the window should be raised whenever
	       a Control-G is received.

       +pob    This  option  indicates	that  the  window should not be	raised
	       whenever	a Control-G is received.

       -rightbar
	       Force scrollbar to the right side of VT100 screen.

       -rvc    This option disables the	display	 of  characters	 with  reverse
	       attribute as color.

       +rvc    This  option  enables  the  display  of characters with reverse
	       attribute as color.

       -rw     This  option  indicates	that  reverse-wraparound   should   be
	       allowed.	  This	allows the cursor to back up from the leftmost
	       column of one line to the  rightmost  column  of	 the  previous
	       line.  This is very useful for editing long shell command lines
	       and is encouraged.  This	option can be turned on	and  off  from
	       the ``VT	Options'' menu.

       +rw     This  option  indicates	that  reverse-wraparound should	not be
	       allowed.

       -s      This option indicates that  xterm  may  scroll  asynchronously,
	       meaning	that the screen	does not have to be kept completely up
	       to date while scrolling.	 This allows xterm to run faster  when
	       network	latencies  are	very high and is typically useful when
	       running across a	very large internet or many gateways.

       +s      This option indicates that xterm	should scroll synchronously.

       -samename
	       Does not	send title and icon  name  change  requests  when  the
	       request	would  have  no	effect:	the name is not	changed.  This
	       has the advantage of preventing flicker and the disadvantage of
	       requiring  an  extra  round  trip to the	server to find out the
	       previous	value.	In practice this should	never be a problem.

       +samename
	       Always send title and icon name change requests.

       -sb     This option indicates  that  some  number  of  lines  that  are
	       scrolled	 off  the top of the window should be saved and	that a
	       scrollbar should	be  displayed  so  that	 those	lines  can  be
	       viewed.	 This  option  may  be turned on and off from the ``VT
	       Options'' menu.

       +sb     This option indicates that a scrollbar should not be displayed.

       -sf     This option indicates that Sun Function Key escape codes	should
	       be generated for	function keys.

       +sf     This  option indicates that the standard	escape codes should be
	       generated for function keys.

       -si     This option indicates that output to a window should not	 auto-
	       matically  reposition the screen	to the bottom of the scrolling
	       region.	This option can	be turned on and  off  from  the  ``VT
	       Options'' menu.

       +si     This  option  indicates that output to a	window should cause it
	       to scroll to the	bottom.

       -sk     This option indicates that  pressing  a	key  while  using  the
	       scrollbar  to  review  previous	lines of text should cause the
	       window to be repositioned automatically in the normal  position
	       at the bottom of	the scroll region.

       +sk     This  option  indicates	that  pressing	a  key while using the
	       scrollbar should	not cause the window to	be repositioned.

       -sl number
	       This option specifies the number	of lines  to  save  that  have
	       been  scrolled  off the top of the screen.  This	corresponds to
	       the saveLines resource.	The default is 64.

       -sm     This option, corresponding to the  sessionMgt  resource,	 indi-
	       cates that xterm	should set up session manager callbacks.

       +sm     This option indicates that xterm	should not set up session man-
	       ager callbacks.

       -sp     This option indicates that Sun/PC keyboard should  be  assumed,
	       providing  mapping  for	keypad `+' to `,', and CTRL-F1 to F13,
	       CTRL-F2 to F14, etc.

       +sp     This option indicates that the standard escape codes should  be
	       generated for keypad and	function keys.

       -t      This  option  indicates	that  xterm  should start in Tektronix
	       mode, rather than in VT102 mode.	  Switching  between  the  two
	       windows	is  done  using	 the  ``Options''  menus.   Termcap(5)
	       entries	that  work  with   xterm   ``tek4014,''	  ``tek4015,''
	       ``tek4012'',  ``tek4013'' and ``tek4010,'' and ``dumb.''	 xterm
	       automatically searches the termcap file in this order for these
	       entries and then	sets the ``TERM'' and the ``TERMCAP'' environ-
	       ment variables.

       +t      This option indicates that xterm	should start in	VT102 mode.

       -tb     This option, corresponding to the toolBar  resource,  indicates
	       that  xterm should display a toolbar (or	menubar) at the	top of
	       its window.  The	buttons	in the toolbar correspond to the popup
	       menus, e.g., control/left/mouse for "Main Options".

       +tb     This option indicates that xterm	should not set up a toolbar.

       -ti term_id
	       Specify	the  name used by xterm	to select the correct response
	       to terminal ID queries.	It also	specifies the emulation	level,
	       used  to	 determine  the	 type  of  response  to	 a  DA control
	       sequence.  Valid	values include vt52, vt100, vt101, vt102,  and
	       vt220  (the  "vt"  is  optional).   The	default	is vt100.  The
	       term_id argument	specifies the terminal ID to  use.   (This  is
	       the same	as the decTerminalID resource).

       -tm string
	       This  option  specifies	a  series of terminal setting keywords
	       followed	by the characters that should be bound to those	 func-
	       tions,  similar	to  the	 stty program.	The keywords and their
	       values are described in detail in the ttyModes resource.

       -tn name
	       This option specifies the name of the terminal type to  be  set
	       in  the	TERM  environment  variable.   It  corresponds	to the
	       termName	resource.  This	terminal type must exist in the	termi-
	       nal  database  (termcap	or terminfo, depending on how xterm is
	       built) and should have li# and co# entries.   If	 the  terminal
	       type  is	 not  found,  xterm  uses the built-in list ``xterm'',
	       ``vt102'', etc.

       -u8     This option sets	the utf8 resource.  When utf8  is  set,	 xterm
	       interprets  incoming  data  as  UTF-8.  This sets the wideChars
	       resource	as a side-effect, but  the  UTF-8  mode	 set  by  this
	       option  prevents	it from	being turned off.  If you must turn it
	       on and off, use the wideChars resource.

	       This option and the utf8	resource are overridden	by the -lc and
	       -en  options  and  locale resource.  That is, if	xterm has been
	       compiled	to support  luit,  and	the  locale  resource  is  not
	       ``false''  this	option is ignored.  We recommend using the -lc
	       option or the ``locale: true'' resource in UTF-8	 locales  when
	       your  operating	system supports	locale,	or -en UTF-8 option or
	       the ``locale: UTF-8'' resource when your	operating system  does
	       not support locale.

       +u8     This option resets the utf8 resource.

       -ulc    This  option  disables the display of characters	with underline
	       attribute as color rather than with underlining.

       +ulc    This option enables the display of  characters  with  underline
	       attribute as color rather than with underlining.

       -ut     This option indicates that xterm	should not write a record into
	       the the system utmp log file.

       +ut     This option indicates that xterm	should write a record into the
	       system utmp log file.

       -vb     This  option  indicates that a visual bell is preferred over an
	       audible one.  Instead of	ringing	the terminal bell  whenever  a
	       Control-G is received, the window will be flashed.

       +vb     This option indicates that a visual bell	should not be used.

       -wc     This  option  sets  the	wideChars resource.  When wideChars is
	       set, xterm maintains internal structures	for 16-bit characters.
	       If  you do not set this resource	to ``true'', xterm will	ignore
	       the escape sequence which turns UTF-8 mode  on  and  off.   The
	       default is ``false''.

       +wc     This option resets the wideChars	resource.

       -wf     This  option indicates that xterm should	wait for the window to
	       be mapped the first time	before starting	the subprocess so that
	       the  initial  terminal  size settings and environment variables
	       are correct.  It	is the application's responsibility  to	 catch
	       subsequent terminal size	changes.

       +wf     This  option indicates that xterm should	not wait before	start-
	       ing the subprocess.

       -ziconbeep percent
	       Same as zIconBeep resource.  If	percent	 is  non-zero,	xterms
	       that  produce  output while iconified will cause	an XBell sound
	       at the given volume and have  "***"  prepended  to  their  icon
	       titles.	 Most  window managers will detect this	change immedi-
	       ately, showing you which	window has  the	 output.   (A  similar
	       feature was in x10 xterm.)

       -C      This  option  indicates that this window	should receive console
	       output.	This is	not supported on all systems.  To obtain  con-
	       sole  output,  you must be the owner of the console device, and
	       you must	have read and write permission for  it.	  If  you  are
	       running	X under	xdm on the console screen you may need to have
	       the session startup and reset programs  explicitly  change  the
	       ownership  of the console device	in order to get	this option to
	       work.

       -Sccn   This option allows xterm	to be used  as	an  input  and	output
	       channel	for  an	existing program and is	sometimes used in spe-
	       cialized	applications.  The option value	specifies the last few
	       letters	of the name of a pseudo-terminal to use	in slave mode,
	       plus the	number of  the	inherited  file	 descriptor.   If  the
	       option contains a ``/'' character, that delimits	the characters
	       used for	the pseudo-terminal name  from	the  file  descriptor.
	       Otherwise,  exactly two characters are used from	the option for
	       the pseudo-terminal name, the remainder is the file descriptor.
	       Examples:
		      -S123/45
		      -Sab34

	       Note that xterm does not	close any file descriptor which	it did
	       not open	for its	own use.  It is	possible (though probably  not
	       portable)  to  have  an	application  which passes an open file
	       descriptor down to xterm	past  the  initialization  or  the  -S
	       option to a process running in the xterm.

       The  following  command	line  arguments	are provided for compatibility
       with older versions.  They may not be supported in the next release  as
       the X Toolkit provides standard options that accomplish the same	task.

       %geom   This  option  specifies	the preferred size and position	of the
	       Tektronix window.  It is	shorthand for specifying the ``*tekGe-
	       ometry''	resource.

	#geom  This  option  specifies the preferred position of the icon win-
	       dow.  It	is  shorthand  for  specifying	the  ``*iconGeometry''
	       resource.

       -T string
	       This  option  specifies	the  title for xterm's windows.	 It is
	       equivalent to -title.

       -n string
	       This option specifies the icon name for xterm's windows.	 It is
	       shorthand for specifying	the ``*iconName'' resource.  Note that
	       this is not the same as the toolkit option -name	 (see  below).
	       The default icon	name is	the application	name.

       -r      This option indicates that reverse video	should be simulated by
	       swapping	the foreground and background colors.  It  is  equiva-
	       lent to -rv.

       -w number
	       This  option  specifies	the width in pixels of the border sur-
	       rounding	the window.  It	is equivalent to -borderwidth or -bw.

       The following standard X	Toolkit	command	line  arguments	 are  commonly
       used with xterm:

       -bd color
	       This  option  specifies	the color to use for the border	of the
	       window.	xterm uses the X Toolkit  default,  which  is  ``XtDe-
	       faultForeground''.

       -bg color
	       This  option  specifies	the color to use for the background of
	       the window.  The	default	is ``XtDefaultBackground.''

       -bw number
	       This option specifies the width in pixels of  the  border  sur-
	       rounding	the window.

       -display	display
	       This option specifies the X server to contact; see X(7).

       -fg color
	       This  option  specifies	the  color to use for displaying text.
	       The default is ``XtDefaultForeground.''

       -fn font
	       This option specifies the font to be used for displaying	normal
	       text.  The default is fixed.

       -font font
	       This is the same	as -fn.

       -geometry geometry
	       This  option  specifies	the preferred size and position	of the
	       VT102 window; see X(7).

       -iconic This option indicates that xterm	should ask the window  manager
	       to start	it as an icon rather than as the normal	window.

       -name name
	       This   option   specifies  the  application  name  under	 which
	       resources are to	be obtained,  rather  than  the	 default  exe-
	       cutable	file  name.   Name  should  not	contain	``.'' or ``*''
	       characters.

       -rv     This option indicates that reverse video	should be simulated by
	       swapping	the foreground and background colors.

       +rv     Disable	the simulation of reverse video	by swapping foreground
	       and background colors.

       -title string
	       This option specifies the window	title  string,	which  may  be
	       displayed  by  window  managers	if  the	 user so chooses.  The
	       default title is	 the  command  line  specified	after  the  -e
	       option, if any, otherwise the application name.

       -xrm resourcestring
	       This  option  specifies	a resource string to be	used.  This is
	       especially useful for setting resources that do not have	 sepa-
	       rate command line options.

RESOURCES
       The  program  understands  all of the core X Toolkit resource names and
       classes.	 Application specific resources	(e.g., "XTerm.NAME") follow:

       backarrowKeyIsErase (class BackarrowKeyIsErase)
	       Tie  the	 VTxxx	backarrowKey  and  ptyInitialErase   resources
	       together	 by  setting the DECBKM	state according	to whether the
	       initial value of	stty erase is a	backspace (8) or delete	 (127)
	       character.   The	default	is ``false'', which disables this fea-
	       ture.

       hold (class Hold)
	       If true,	xterm will not immediately destroy its window when the
	       shell command completes.	 It will wait until you	use the	window
	       manager to destroy/kill the window, or  if  you	use  the  menu
	       entries	that send a signal, e.g., HUP or KILL.	You may	scroll
	       back, select text, etc.,	to perform most	graphical  operations.
	       Resizing	 the  display  will  lose  data,  however,  since this
	       involves	interaction with the shell which is no longer running.

       hpFunctionKeys (class HpFunctionKeys)
	       Specifies whether or not	HP Function Key	escape codes should be
	       generated   for	 function  keys	 instead  of  standard	escape
	       sequences.  See also the	keyboardType resource.

       iconGeometry (class IconGeometry)
	       Specifies the preferred size and	position  of  the  application
	       when  iconified.	  It  is  not necessarily obeyed by all	window
	       managers.

       iconName	(class IconName)
	       Specifies the icon name.	 The default is	the application	name.

       keyboardType (class KeyboardType)
	       Enables one (or none) of	the various  keyboard-type  resources:
	       hpFunctionKeys,	scoFunctionKeys,  sunFunctionKeys  and sunKey-
	       board.  The resource's value should be one of the corresponding
	       strings	hp,  sco,  sun or vt220.  The individual resources are
	       provided	for legacy support; this resource is simpler to	use.

       maxBufSize (class MaxBufSize)
	       Specify the maximum size	of the input buffer.  The  default  is
	       32768.  You cannot set this to a	value less than	the minBufSize
	       resource.  It will be increased as needed to  make  that	 value
	       evenly divide this one.

	       On  some	 systems  you  may want	to increase one	or both	of the
	       maxBufSize and minBufSize resource  values  to  achieve	better
	       performance  if	the  operating	system	prefers	 larger	buffer
	       sizes.

       messages	(class Messages)
	       Specifies whether write access to the terminal is allowed  ini-
	       tially.	See mesg(1).  The default is ``true''.

       minBufSize (class MinBufSize)
	       Specify	the minimum size of the	input buffer, i.e., the	amount
	       of data that xterm requests on each read.  The default is 4096.
	       You cannot set this to a	value less than	64.

       ptyHandshake (class PtyHandshake)
	       If  ``true'', xterm will	perform	handshaking during initializa-
	       tion to ensure that the parent and child	processes  update  the
	       utmp and	stty state.  The default is ``true''.

       ptyInitialErase (class PtyInitialErase)
	       If  ``true'', xterm will	use the	pseudo-terminal's sense	of the
	       stty erase value.  If ``false'',	xterm will set the stty	 erase
	       value  to match its own configuration, using the	kb string from
	       the termcap entry as a  reference,  if  available.   In	either
	       case, the result	is applied to the TERMCAP variable which xterm
	       sets.  The default is ``false''.

       sameName	(class SameName)
	       If the value of this resource is	``true'', xterm	does not  send
	       title and icon name change requests when	the request would have
	       no effect: the name is not changed.  This has the advantage  of
	       preventing  flicker  and	the disadvantage of requiring an extra
	       round trip to the server	to find	out the	 previous  value.   In
	       practice	 this  should  never  be  a  problem.	The default is
	       ``true''.

       scoFunctionKeys (class ScoFunctionKeys)
	       Specifies whether or not	SCP Function Key escape	 codes	should
	       be  generated  for  function  keys  instead  of standard	escape
	       sequences.  See also the	keyboardType resource.

       sessionMgt (class SessionMgt)
	       If the value of this resource is	``true'', xterm	sets  up  ses-
	       sion  manager callbacks for XtNdieCallback and XtNsaveCallback.
	       The default is ``true''.

       sunFunctionKeys (class SunFunctionKeys)
	       Specifies whether or not	Sun Function Key escape	 codes	should
	       be  generated  for  function  keys  instead  of standard	escape
	       sequences.  See also the	keyboardType resource.

       sunKeyboard (class SunKeyboard)
	       Specifies whether or  not  Sun/PC  keyboard  layout  should  be
	       assumed	rather	than DEC VT220.	 This causes the keypad	`+' to
	       be mapped to `,'.  and CTRL F1-F12 to F11-F20, depending	on the
	       setting	of  the	 ctrlFKeys  resource.  so xterm	emulates a DEC
	       VT220 more accurately.  Otherwise (the  default,	 with  sunKey-
	       board  set  to ``false''), xterm	uses PC-style bindings for the
	       function	keys and keypad.

	       PC-style	bindings use the Shift,	Alt, Control and Meta keys  as
	       modifiers  for function-keys and	keypad (see the	document Xterm
	       Control Sequences for  details).	  The  PC-style	 bindings  are
	       analogous  to  PCTerm,  but not the same	thing.	Normally these
	       bindings	do not conflict	with  the  use	of  the	 Meta  key  as
	       described  for  the  eightBitInput  resource.  If they do, note
	       that the	PC-style bindings are evaluated	first.	See  also  the
	       keyboardType resource.

       termName	(class TermName)
	       Specifies the terminal type name	to be set in the TERM environ-
	       ment variable.

       title (class Title)
	       Specifies a string that may be used by the window manager  when
	       displaying this application.

       toolBar (class ToolBar)
	       Specifies  whether or not the toolbar should be displayed.  The
	       default is ``true.''

       ttyModes	(class TtyModes)
	       Specifies a string containing terminal setting keywords and the
	       characters  to  which  they  may	 be bound.  Allowable keywords
	       include:	brk, dsusp, eof,  eol,	eol2,  erase,  erase2,	flush,
	       intr,  kill,  lnext,  quit,  rprnt,  start, status, stop, susp,
	       swtch and weras.	 Control characters may	be specified as	 ^char
	       (e.g.,  ^c  or ^u) and ^? may be	used to	indicate delete	(127).
	       Use ^- to denote	undef.	Use \034 to represent ^\, since	a lit-
	       eral backslash in an X resource escapes the next	character.

	       This  is	 very  useful for overriding the default terminal set-
	       tings without having to do an  stty  every  time	 an  xterm  is
	       started.	  Note,	however, that the stty program on a given host
	       may use different keywords; xterm's table is built-in.

       useInsertMode (class UseInsertMode)
	       Force use of insert mode	by adding appropriate entries  to  the
	       TERMCAP	environment  variable.	 This  is useful if the	system
	       termcap is broken.  The default is ``false.''

       utmpDisplayId (class UtmpDisplayId)
	       Specifies whether or not	xterm should try to record the display
	       identifier  (display  number  and screen	number)	as well	as the
	       hostname	in the system utmp log file.  The default is ``true.''

       utmpInhibit (class UtmpInhibit)
	       Specifies whether or not	xterm should try to record the	user's
	       terminal	 in the	system utmp log	file.  If true,	xterm will not
	       try.  The default is ``false.''

       waitForMap (class WaitForMap)
	       Specifies whether or not	xterm should wait for the initial win-
	       dow  map	 before	 starting  the	subprocess.   The  default  is
	       ``false.''

       zIconBeep (class	ZIconBeep)
	       Same as -ziconbeep command line argument.  If the value of this
	       resource	 is  non-zero, xterms that produce output while	iconi-
	       fied will cause an XBell	sound at the  given  volume  and  have
	       "***"  prepended	 to  their  icon titles.  Most window managers
	       will detect this	change immediately, showing you	 which	window
	       has  the	 output.   (A  similar feature was in x10 xterm.)  The
	       default is ``false.''

       The following resources are specified  as  part	of  the	 vt100	widget
       (class	 VT100):   These   are	 specified   by	  patterns   such   as
       "XTerm.vt100.NAME":

       activeIcon (class ActiveIcon)
	       Specifies whether or not	active icon windows  are  to  be  used
	       when the	xterm window is	iconified, if this feature is compiled
	       into xterm.  The	active icon is a miniature  representation  of
	       the  content  of	 the  window  and  will	 update	as the content
	       changes.	 Not all window	managers necessarily support  applica-
	       tion  icon  windows.   Some  window  managers will allow	you to
	       enter keystrokes	into the active	icon window.  The  default  is
	       ``false.''

       allowC1Printable	(class AllowC1Printable)
	       If  true,  overrides the	mapping	of C1 controls (codes 128-159)
	       to make them be treated as if they were	printable  characters.
	       Although	this corresponds to no particular standard, some users
	       insist it is a VT100.  The default is ``false.''

       allowSendEvents (class AllowSendEvents)
	       Specifies whether or not	synthetic key and button events	 (gen-
	       erated using the	X protocol SendEvent request) should be	inter-
	       preted or discarded.  The default is ``false'' meaning they are
	       discarded.  Note	that allowing such events creates a very large
	       security	hole.  The default is ``false.''

       allowWindowOps (class AllowWindowOps)
	       Specifies whether extended window control sequences (as used in
	       dtterm) for should be allowed.  The default is ``true.''

       alwaysHighlight (class AlwaysHighlight)
	       Specifies  whether  or  not xterm should	always display a high-
	       lighted text cursor.  By	default	(if this resource is false), a
	       hollow  text cursor is displayed	whenever the pointer moves out
	       of the window or	the window loses the input focus.  The default
	       is ``false.''

       alwaysUseMods (class AlwaysUseMods)
	       Override	the numLock resource, telling xterm to use the Alt and
	       Meta  modifiers	to  construct  parameters  for	function   key
	       sequences  even	if  those modifiers appear in the translations
	       resource.  The default is ``false.''

       answerbackString	(class AnswerbackString)
	       Specifies the string that xterm sends in	 response  to  an  ENQ
	       (control/E)  character  from  the host.	The default is a blank
	       string, i.e., ``''.  A hardware VT100 implements	 this  feature
	       as a setup option.

       appcursorDefault	(class AppcursorDefault)
	       If ``true,'' the	cursor keys are	initially in application mode.
	       This is the same	as the VT102 private DECCKM mode, The  default
	       is ``false.''

       appkeypadDefault	(class AppkeypadDefault)
	       If ``true,'' the	keypad keys are	initially in application mode.
	       The default is ``false.''

       autoWrap	(class AutoWrap)
	       Specifies whether or not	 auto-wraparound  should  be  enabled.
	       This is the same	as the VT102 DECAWM.  The default is ``true.''

       awaitInput (class AwaitInput)
	       Specifies  whether or not the xterm uses	a 50 millisecond time-
	       out to await input (i.e., to support the	 Xaw3d	arrow  scroll-
	       bar).  The default is ``false.''

       backarrowKey (class BackarrowKey)
	       Specifies  whether  the backarrow key transmits a backspace (8)
	       or delete (127) character.  This	corresponds to the DECBKM con-
	       trol  sequence.	The default (backspace)	is ``true.''  Pressing
	       the control key toggles this behavior.

       background (class Background)
	       Specifies the color to use for the background  of  the  window.
	       The default is ``XtDefaultBackground.''

       bellOnReset (class BellOnReset)
	       Specifies whether to sound a bell when doing a hard reset.  The
	       default is ``true.''

       bellSuppressTime	(class BellSuppressTime)
	       Number of milliseconds after a  bell  command  is  sent	during
	       which additional	bells will be suppressed.  Default is 200.  If
	       set non-zero, additional	bells will also	 be  suppressed	 until
	       the  server  reports that processing of the first bell has been
	       completed; this feature is most useful with the visible bell.

       boldColors (class ColorMode)
	       Specifies whether to combine bold attribute  with  colors  like
	       the  IBM	 PC,  i.e., map	colors 0 through 7 to colors 8 through
	       15.  These normally are the brighter versions of	 the  first  8
	       colors, hence bold.  The	default	is ``true.''

       boldFont	(class BoldFont)
	       Specifies  the  name  of	 the bold font to use instead of over-
	       striking.  There	is no default for this resource.

       boldMode	(class BoldMode)
	       This specifies whether or not  text  with  the  bold  attribute
	       should  be  overstruck  to  simulate bold fonts if the resolved
	       bold font is the	same as	the normal font.  It may be  desirable
	       to  disable  bold  fonts	 when color is being used for the bold
	       attribute.  Note	that xterm has one bold	font which you may set
	       explicitly.   It	 attempts  to  match a bold font for the other
	       font selections (font1 through font6).  If the normal and  bold
	       fonts  are  distinct, this resource has no effect.  The default
	       is ``true.''

	       Although	xterm attempts to match	a bold	font  for  other  font
	       selections,  the	 font  server may not cooperate.  Since	X11R6,
	       bitmap fonts have been scaled.  The font	server claims to  pro-
	       vide  the  bold font that xterm requests, but the result	is not
	       always readable.	 XFree86 provides a feature which can be  used
	       to  suppress the	scaling.  In the X server's configuration file
	       (e.g., "/etc/X11/XFree86"), you can add ":unscaled" to the  end
	       of the directory	specification for the "misc" fonts, which com-
	       prise the fixed-pitch fonts that	are used by xterm.  For	 exam-
	       ple
		    FontPath  "/usr/lib/X11/fonts/misc/"

	       would become
		    FontPath  "/usr/lib/X11/fonts/misc/:unscaled"

	       Depending  on  your configuration, the font server may have its
	       own configuration file.	The same ":unscaled" can be  added  to
	       its  configuration  file	at the end of the directory specifica-
	       tion for	"misc".

       brokenLinuxOSC (class BrokenLinuxOSC)
	       If true,	xterm applies a	workaround to ignore malformed control
	       sequences  that a Linux script might send.  Compare the palette
	       control sequences documented  in	 console_codes	with  ECMA-48.
	       The default is ``true.''

       brokenSelections	(class BrokenSelections)
	       If  true,  xterm	in 8-bit mode will interpret STRING selections
	       as carrying text	in the current	locale's  encoding.   Normally
	       STRING  selections carry	ISO-8859-1 encoded text.  Setting this
	       resource	to ``true'' violates the ICCCM;	it  may,  however,  be
	       useful for interacting with some	broken X clients.  The default
	       is ``false.''

       brokenStringTerm	(class BrokenStringTerm)
	       provides	a work-around for some ISDN  routers  which  start  an
	       application  control string without completing it.  Set this to
	       ``true''	if xterm  appears  to  freeze  when  connecting.   The
	       default is ``false.''

       c132 (class C132)
	       Specifies  whether  or  not  the	VT102 DECCOLM escape sequence,
	       used to switch between 80 and 132 columns, should  be  honored.
	       The default is ``false.''

       cacheDoublesize (class CacheDoublesize)
	       Specifies  the  maximum	number of double-sized fonts which are
	       cached by xterm.	 The default (8) may be	too large for  some  X
	       terminals  with	limited	 memory.   Set this to zero to disable
	       doublesize fonts	altogether.

       charClass (class	CharClass)
	       Specifies comma-separated lists of character class bindings  of
	       the form	[low-]high:value.  These are used in determining which
	       sets of characters should be treated the	same  when  doing  cut
	       and paste.  See the CHARACTER CLASSES section.

       cjkWidth	(class CjkWidth)
	       Specifies  whether  xterm  should  follow  the traditional East
	       Asian width convention.	When turned on,	characters  with  East
	       Asian  Ambiguous	 (A) category in UTR 11	have a column width of
	       2.  You may have	to set this option to  ``true''	 if  you  have
	       some  old  East	Asian terminal based programs that assume that
	       line-drawing characters have a column width of 2.  The  default
	       is ``false.''

       color0 (class Color0)

       color1 (class Color1)

       color2 (class Color2)

       color3 (class Color3)

       color4 (class Color4)

       color5 (class Color5)

       color6 (class Color6)

       color7 (class Color7)
	       These  specify  the  colors  for	 the  ISO 6429 extension.  The
	       defaults	are, respectively, black,  red3,  green3,  yellow3,  a
	       customizable  dark  blue,  magenta3,  cyan3,  and  gray90.  The
	       default shades of color are chosen to allow the colors 8-15  to
	       be used as brighter versions.

       color8 (class Color8)

       color9 (class Color9)

       color10 (class Color10)

       color11 (class Color11)

       color12 (class Color12)

       color13 (class Color13)

       color14 (class Color14)

       color15 (class Color15)
	       These specify the colors	for the	ISO 6429 extension if the bold
	       attribute is also enabled.  The	default	 resource  values  are
	       respectively,  gray30, red, green, yellow, a customizable light
	       blue, magenta, cyan, and	white.

       color16 (class Color16)

       through

       color255	(class Color255)
	       These specify the colors	 for  the  256-color  extension.   The
	       default resource	values are for colors 16 through 231 to	make a
	       6x6x6 color  cube,  and	colors	232  through  255  to  make  a
	       grayscale ramp.

       colorAttrMode (class ColorAttrMode)
	       Specifies whether colorBD, colorBL, colorRV, and	colorUL	should
	       override	ANSI colors.  If not, these are	displayed only when no
	       ANSI  colors have been set for the corresponding	position.  The
	       default is ``false.''

       colorBD (class ColorBD)
	       This specifies the color	to use to display bold	characters  if
	       the  ``colorBDMode''  resource  is  enabled.   The  default  is
	       ``XtDefaultForeground.''

       colorBDMode (class ColorAttrMode)
	       Specifies whether characters with the bold attribute should  be
	       displayed  in  color  or	as bold	characters.  Note that setting
	       colorMode off disables all colors, including bold.  The default
	       is ``false.''

       colorBL (class ColorBL)
	       This  specifies the color to use	to display blink characters if
	       the  ``colorBLMode''  resource  is  enabled.   The  default  is
	       ``XtDefaultForeground.''

       colorBLMode (class ColorAttrMode)
	       Specifies whether characters with the blink attribute should be
	       displayed in color.  Note that setting colorMode	 off  disables
	       all colors, including this.  The	default	is ``false.''

       colorMode (class	ColorMode)
	       Specifies  whether  or not recognition of ANSI (ISO 6429) color
	       change escape sequences should  be  enabled.   The  default  is
	       ``true.''

       colorRV (class ColorRV)
	       This  specifies	the color to use to display reverse characters
	       if the ``colorRVMode'' resource is  enabled.   The  default  is
	       ``XtDefaultForeground.''

       colorRVMode (class ColorAttrMode)
	       Specifies  whether characters with the reverse attribute	should
	       be displayed in color.  Note that setting  colorMode  off  dis-
	       ables all colors, including this.  The default is ``false.''

       colorUL (class ColorUL)
	       This  specifies	the color to use to display underlined charac-
	       ters if the ``colorULMode'' resource is enabled.	  The  default
	       is ``XtDefaultForeground.''

       colorULMode (class ColorAttrMode)
	       Specifies  whether  characters  with  the  underline  attribute
	       should be displayed in color or as underlined characters.  Note
	       that  setting  colorMode	 off  disables	all  colors, including
	       underlining.  The default is ``false.''

       ctrlFKeys (class	CtrlFKeys)
	       In VT220	keyboard mode (see  sunKeyboard	 resource),  specifies
	       the  amount  by	which to shift F1-F12 given a control modifier
	       (CTRL).	This allows you	to generate key	symbols	for F10-F20 on
	       a  Sun/PC  keyboard.   The  default is ``10'', which means that
	       CTRL F1 generates the key symbol	for F11.

       curses (class Curses)
	       Specifies whether or not	the last column	bug in more(1)	should
	       be worked around.  See the -cu option for details.  The default
	       is ``false.''

       cursorBlink (class CursorBlink)
	       Specifies whether to make the cursor  blink.   The  default  is
	       ``false.''

       cursorColor (class CursorColor)
	       Specifies the color to use for the text cursor.	The default is
	       ``XtDefaultForeground.''	 Xterm attempts	 to  keep  this	 color
	       from being the same as the background color, since it draws the
	       cursor by filling the background	of  a  text  cell.   The  same
	       restriction  applies to control sequences which may change this
	       color.

       cursorOffTime (class CursorOffTime)
	       Specifies the duration of the "off" part	of  the	 cursor	 blink
	       cycle-time  in  milliseconds.   The same	timer is used for text
	       blinking.  The default is 300.

       cursorOnTime (class CursorOnTime)
	       Specifies the duration of the "on" part	of  the	 cursor	 blink
	       cycle-time,  in	milliseconds.  The same	timer is used for text
	       blinking.  The default is 600.

       cutNewline (class CutNewline)
	       If ``false'', triple clicking to	select a line does not include
	       the  Newline  at	the end	of the line.  If ``true'', the Newline
	       is selected.  The default is ``true.''

       cutToBeginningOfLine (class CutToBeginningOfLine)
	       If ``false'', triple clicking to	select	a  line	 selects  only
	       from the	current	word forward.  If ``true'', the	entire line is
	       selected.  The default is ``true.''

       decTerminalID (class DecTerminalID)
	       Specifies the emulation	level  (100=VT100,  220=VT220,	etc.),
	       used  to	 determine  the	 type  of  response  to	 a  DA control
	       sequence.  Leading  non-digit  characters  are  ignored,	 e.g.,
	       "vt100" and "100" are the same.	The default is 100.

       deleteIsDEL (class DeleteIsDEL)
	       Specifies  whether  the Delete key on the editing keypad	should
	       send DEL	(127) or the VT220-style Remove	escape sequence.   The
	       default is ``false,'' for the latter.

       dynamicColors (class DynamicColors)
	       Specifies  whether  or  not  escape  sequences to change	colors
	       assigned	to different attributes	are recognized.

       eightBitControl (class EightBitControl)
	       Specifies whether or not	control	sequences sent by the terminal
	       should  be  eight-bit  characters  or  escape  sequences.   The
	       default is ``false.''

       eightBitInput (class EightBitInput)
	       If ``true'', Meta characters (a single-byte character  combined
	       with  the  keys	modifier key) input from the keyboard are pre-
	       sented as a single character with the  eighth  bit  turned  on.
	       The  terminal is	put into 8-bit mode.  If ``false'', Meta char-
	       acters are converted into a  two-character  sequence  with  the
	       character  itself  preceded by ESC.  On startup,	xterm tries to
	       put the terminal	into 7-bit mode.  The metaSendsEscape resource
	       may override this.  The default is ``true.''

	       Generally keyboards do not have a key labeled "Meta", but "Alt"
	       keys are	common,	and they are conventionally used  for  "Meta".
	       If  they	were synonymous, it would have been reasonable to name
	       this resource "altSendsEscape", reversing its sense.  For  more
	       background on this, see the meta	function in curses.

	       Note  that  the Alt key is not necessarily the same as the Meta
	       modifier.  xmodmap lists	your key modifiers.  X	defines	 modi-
	       fiers  for  shift,  (caps) lock and control, as well as 5 addi-
	       tional modifiers	which are generally used to configure key mod-
	       ifiers.	 xterm inspects	the same information to	find the modi-
	       fier associated with either Meta	key (left or right), and  uses
	       that  key  as the Meta modifier.	 It also looks for the NumLock
	       key, to recognize the modifier which is associated with that.

	       If your xmodmap configuration uses the same keycodes  for  Alt-
	       and  Meta-keys,	xterm  will  only see the Alt-key definitions,
	       since those are tested before  Meta-keys.   NumLock  is	tested
	       first.	It is important	to keep	these keys distinct; otherwise
	       some of xterm's functionality is	not available.

       eightBitOutput (class EightBitOutput)
	       Specifies whether or not	eight-bit  characters  sent  from  the
	       host  should  be	 accepted as is	or stripped when printed.  The
	       default is ``true,'' which means	that they are accepted as is.

       faceName	(class FaceName)
	       Specify the  pattern  for  fonts	 selected  from	 the  FreeType
	       library	if  support  for that library was compiled into	xterm.
	       There is	no default.  If	not specified, or if there is no match
	       for both	normal and bold	fonts, xterm uses the font and related
	       resources.

       faceNameDoublesize (class FaceNameDoublesize)
	       Specify an double-width font for	 cases	where  an  application
	       requires	this, e.g., in CJK applications.  There	is no default.
	       If  the	application  uses  double-wide	characters  and	  this
	       resource	 is not	given, xterm  will use a scaled	version	of the
	       font given by faceName.

       faceSize	(class FaceSize)
	       Specify the pointsize for  fonts	 selected  from	 the  FreeType
	       library	if  support  for that library was compiled into	xterm.
	       The default is ``14.''

       font (class Font)
	       Specifies  the  name  of	 the  normal  font.   The  default  is
	       ``fixed.''

	       See  the	discussion of the locale resource, which describes how
	       this font may be	overridden.

	       NOTE: some resource files use patterns such as
	       *font: fixed

	       which are overly	broad, affecting both
	       xterm.vt100.font

	       and
	       xterm.vt100..utf8fonts.font

	       which is	probably not what you intended.

       font1 (class Font1)
	       Specifies the name of the first alternative font.

       font2 (class Font2)
	       Specifies the name of the second	alternative font.

       font3 (class Font3)
	       Specifies the name of the third alternative font.

       font4 (class Font4)
	       Specifies the name of the fourth	alternative font.

       font5 (class Font5)
	       Specifies the name of the fifth alternative font.

       font6 (class Font6)
	       Specifies the name of the sixth alternative font.

       fontDoublesize (class FontDoublesize)
	       Specifies whether xterm should attempt to use font  scaling  to
	       draw  doublesize	characters.  Some older	font servers cannot do
	       this  properly,	will  return  misleading  font	metrics.   The
	       default	is ``true''.  If disabled, xterm will simulate double-
	       size  characters	 by  drawing  normal  characters  with	spaces
	       between them.

       forceBoxChars (class ForceBoxChars)
	       Specifies whether xterm should assume the normal	and bold fonts
	       have VT100 line-drawing characters:

	       -    The	fixed-pitch ISO-8859-*-encoded	fonts  used  by	 xterm
		    normally have the VT100 line-drawing glyphs	in cells 1-31.
		    Other fixed-pitch fonts may	be more	attractive,  but  lack
		    these glyphs.

	       -    When  using	an ISO-10646-1 font and	the wideChars resource
		    is true, xterm uses	the Unicode  glyphs  which  match  the
		    VT100 line-drawing glyphs.

	       If  ``false'',  xterm checks for	missing	glyphs in the font and
	       makes line-drawing characters directly as needed.  If ``true'',
	       xterm  uses  whatever  is  in  the  font	without	checking.  The
	       default is ``false.''

       foreground (class Foreground)
	       Specifies the color to use for displaying text in  the  window.
	       Setting	the class name instead of the instance name is an easy
	       way to have everything that would normally appear in  the  text
	       color change color.  The	default	is ``XtDefaultForeground.''

       freeBoldBox (class freeBoldBox)
	       Specifies  whether  xterm  should assume	the bounding boxes for
	       normal and bold fonts are compatible.  If ``false'', xterm com-
	       pares  them  and	 will reject choices of	bold fonts that	do not
	       match the size of the normal font.  The default	is  ``false'',
	       which means that	the comparison is performed.

       geometry	(class Geometry)
	       Specifies  the preferred	size and position of the VT102 window.
	       There is	no default for this resource.

       highlightColor (class HighlightColor)
	       Specifies the color to use for the background  of  selected  or
	       otherwise highlighted text.  If not specified, reverse video is
	       used.  The default is ``XtDefaultForeground.''

       highlightSelection (class HighlightSelection)
	       If ``false'', selecting with the	mouse highlights all positions
	       on  the	screen	between	the beginning of the selection and the
	       current position.  If ``true'', xterm highlights	only the posi-
	       tions  that  contain text that can be selected.	The default is
	       ``false.''

	       Depending on the	way your applications  write  to  the  screen,
	       there  may  be trailing blanks on a line.  Xterm	stores data as
	       it is shown on the screen.  Erasing  the	 display  changes  the
	       internal	state of each cell so it is not	considered a blank for
	       the purpose of selection.  Blanks written since the last	 erase
	       are  selectable.	 If you	do not wish to have trailing blanks in
	       a selection, use	the trimSelection resource.

       hpLowerleftBugCompat (class HpLowerleftBugCompat)
	       Specifies whether to work around	 a  bug	 in  HP's  xdb,	 which
	       ignores	termcap	 and  always  sends ESC	F to move to the lower
	       left corner.  ``true'' causes xterm to interpret	 ESC  F	 as  a
	       request	to  move  to the lower left corner of the screen.  The
	       default is ``false.''

       i18nSelections (class I18nSelections)
	       If false, xterm will never request the targets COMPOUND_TEXT or
	       TEXT.  The default is ``true.'' It may be set to	false in order
	       to work around ICCCM violations by other	X clients.

       iconBorderColor (class BorderColor)
	       Specifies the border color for the active icon window  if  this
	       feature	is  compiled into xterm.  Not all window managers will
	       make the	icon border visible.

       iconBorderWidth (class BorderWidth)
	       Specifies the border width for the active icon window  if  this
	       feature	is  compiled  into  xterm.  The	default	is 2.  Not all
	       window managers will make the border visible.

       iconFont	(class IconFont)
	       Specifies the font for the miniature  active  icon  window,  if
	       this feature is compiled	into xterm.  The default is "nil2".

       internalBorder (class BorderWidth)
	       Specifies  the  number of pixels	between	the characters and the
	       window border.  The default is 2.

       italicULMode (class ColorAttrMode)
	       Specifies  whether  characters  with  the  underline  attribute
	       should  be displayed in an italic font or as underlined charac-
	       ters.

       jumpScroll (class JumpScroll)
	       Specifies whether or not	jump scroll should be used.  This cor-
	       responds	 to  the  VT102	 DECSCLM private mode.	The default is
	       ``true.''

       keyboardDialect (class KeyboardDialect)
	       Specifies the initial keyboard dialect, as well as the  default
	       value  when the terminal	is reset.  The value given is the same
	       as the final character in the control  sequences	 which	change
	       character  sets.	 The default is	``B'', which corresponds to US
	       ASCII.

       nameKeymap (class NameKeymap)
	       See the discussion of the keymap() action.

       limitResize (class LimitResize)
	       Limits resizing of the screen via control sequence to  a	 given
	       multiple	of the display dimensions.  The	default	is ``1''.

       locale (class Locale)
	       Specifies  how to use luit, an encoding converter between UTF-8
	       and locale encodings.  The resource value (ignoring  case)  may
	       be:

	       true
		   xterm  will	use  the  encoding  specified  by  the	users'
		   LC_CTYPE locale (i.e., LC_ALL, LC_CTYPE, or LANG variables)
		   as  far  as	possible.  This	is realized by always enabling
		   UTF-8 mode and invoking luit	in non-UTF-8 locales.

	       medium
		   xterm will follow users' LC_CTYPE locale  only  for	UTF-8,
		   east	 Asian,	and Thai locales, where	the encodings were not
		   supported by	conventional 8bit mode	with  changing	fonts.
		   For other locales, xterm will use conventional 8bit mode.

	       checkfont
		   If  mini-luit is compiled-in, xterm will check if a Unicode
		   font	has been specified.  If	so, it checks if the character
		   encoding  for  the  current	locale	is  POSIX,  Latin-1 or
		   Latin-9, uses the appropriate mapping to support those with
		   the	Unicode	font.  For other encodings, xterm assumes that
		   UTF-8 encoding is required.

	       false
		   xterm will use conventional 8bit mode or UTF-8 mode accord-
		   ing to utf8 resource	or -u8 option.

	       Any  other  value, e.g.,	``UTF-8'' or ``ISO8859-2'', is assumed
	       to be an	encoding name; luit will be  invoked  to  support  the
	       encoding.   The	actual	list of	supported encodings depends on
	       luit.  The default is ``medium''.

	       Regardless of your locale and encoding, you need	an ISO-10646-1
	       font to display the result.  Your configuration may not include
	       this font, or locale-support by xterm may not  be  needed.   At
	       startup,	 xterm	uses  a	 mechanism  equivalent to the load-vt-
	       fonts(utf8Fonts,	Utf8Fonts) action to  load  font  name	subre-
	       sources	of  the	VT100 widget.  That is,	resource patterns such
	       as  "*vt100.utf8Fonts.font"  will  be  loaded,  and  (if	  this
	       resource	 is enabled), override the normal fonts.  If no	subre-
	       sources are found, the  normal  fonts  such  as	"*vt100.font",
	       etc.,  are used.	 The resource files distributed	with xterm use
	       ISO-10646-1 fonts, but do not rely on them unless you are using
	       the locale mechanism.

       localeFilter (class LocaleFilter)
	       Specifies  the  file  name  for	the encoding converter from/to
	       locale encodings	and UTF-8 which	is used	with the -lc option or
	       locale  resource.   The	help  message shown by ``xterm -help''
	       lists the default value,	which depends on your system  configu-
	       ration.

       loginShell (class LoginShell)
	       Specifies  whether  or  not  the	 shell to be run in the	window
	       should be started as a login shell.  The	default	is ``false.''

       marginBell (class MarginBell)
	       Specifies whether or not	the bell should	be rung	when the  user
	       types near the right margin.  The default is ``false.''

       metaSendsEscape (class MetaSendsEscape)
	       If  ``true'',  Meta  characters	(a character combined with the
	       Meta modifier key) are converted	into a two-character  sequence
	       with  the  character  itself  preceded by ESC.  This applies as
	       well to function	key control sequences, unless xterm sees  that
	       Meta  is	 used  in  your	 key translations.  If ``false'', Meta
	       characters input	from the keyboard are handled according	to the
	       eightBitInput resource.	The default is ``false.''

       mkWidth (class MkWidth)
	       Specifies  whether  xterm  should use a built-in	version	of the
	       wide character width calculation.  The default is ``false.''

       modifyCursorKeys	(class ModifyCursorKeys)
	       Tells how to handle the special case  where  Control-,  Shift-,
	       Alt-  or	 Meta-modifiers	 are  used  to	add a parameter	to the
	       escape sequence returned	 by  a	cursor-key.   The  default  is
	       ``2'':

	       Set it to 0 to use the old/obsolete behavior.
	       Set it to 1 to prefix modified sequences	with CSI.
	       Set it to 2 to force the	modifier to be the second parameter.
	       Set  it to 3 to mark the	sequence with a	'>' to hint that it is
	       private.

       modifyOtherKeys (class ModifyOtherKeys)
	       Like modifyCursorKeys,  tells  xterm  to	 construct  an	escape
	       sequence	 for  other  keys  (such as "2") when modified by Con-
	       trol-, Alt- or Meta-modifiers.  This feature does not apply  to
	       function	 keys and well-defined keys such as ESC	or the control
	       keys.  The default is ``0'':

	       Set it to 0 to disable this feature.
	       Set it to 1 to enable this feature for keys except Tab and some
	       special	control	character cases, e.g., Control-Space to	make a
	       NUL.
	       Set it to 1 to enable  this  feature  for  keys	including  the
	       exceptions listed.

       multiClickTime (class MultiClickTime)
	       Specifies  the maximum time in milliseconds between multi-click
	       select events.  The default is 250 milliseconds.

       multiScroll (class MultiScroll)
	       Specifies  whether  or  not  scrolling  should  be  done	 asyn-
	       chronously.  The	default	is ``false.''

       nMarginBell (class Column)
	       Specifies  the  number  of  characters from the right margin at
	       which the margin	bell should be rung, when enabled.

       numLock (class NumLock)
	       If ``true'', xterm checks if NumLock is used as a modifier (see
	       xmodmap(1)).   If  so,  this  modifier  is used to simplify the
	       logic when implementing special	NumLock	 for  the  sunKeyboard
	       resource.   Also	 (when sunKeyboard is false), similar logic is
	       used to find the	modifier associated with the  left  and	 right
	       Alt keys.  The default is ``true.''

       oldXtermFKeys (class OldXtermFKeys)
	       If  ``true'',  xterm  will  use old-style control sequences for
	       function	keys F1	to F4, for  compatibility  with	 X  Consortium
	       xterm.	Otherwise,  it	uses  the VT100-style codes for	PF1 to
	       PF4.  The default is ``false.''

       on2Clicks (class	On2Clicks)

       on3Clicks (class	On3Clicks)

       on4Clicks (class	On4Clicks)

       on5Clicks (class	On5Clicks)
	       Specify	selection  behavior  in	 response  to  multiple	 mouse
	       clicks.	  A  single  mouse  click  is  always  interpreted  as
	       described in the	SELECTION section (see POINTER USAGE).	Multi-
	       ple  mouse clicks (using	the button which activates the select-
	       start action) are interpreted according to the resource	values
	       of on2Clicks, etc.  The resource	value can be one of these:

	       word
		  Select  a  ``word'' as determined by the charClass resource.
		  See the CHARACTER CLASSES section.

	       line
		  Select a line	(counting wrapping).

	       group
		  Select a group of adjacent lines (counting  wrapping).   The
		  selection stops on a blank line.

	       page
		  Select all visible lines, i.e., the page.

	       all
		  Select all lines, i.e., including the	saved lines.

	       regex
		  Select  a  ``word''  as determined by	the regular expression
		  which	follows	in the resource	value.

	       none
		  No selection action is associated with this resource.	 xterm
		  interprets  it as the	end of the list.  For example, you may
		  use it to disable triple (and	higher)	 clicking  by  setting
		  on3Clicks to ``none''.

	       The default values for on2Clicks	and on3Clicks are ``word'' and
	       ``line'',  respectively.	  There	 is  no	 default   value   for
	       on4Clicks  or  on5Clicks,  making  those	inactive.  On startup,
	       xterm determines	the maximum number of clicks by	the  onXClicks
	       resource	values which are set.

       pointerColor (class PointerColor)
	       Specifies  the foreground color of the pointer.	The default is
	       ``XtDefaultForeground.''

       pointerColorBackground (class PointerColorBackground)
	       Specifies the background	color of the pointer.  The default  is
	       ``XtDefaultBackground.''

       pointerShape (class Cursor)
	       Specifies the name of the shape of the pointer.	The default is
	       ``xterm.''

       popOnBell (class	PopOnBell)
	       Specifies whether the window would be raised when Control-G  is
	       received.  The default is ``false.''

       printAttributes (class PrintAttributes)
	       Specifies  whether  to  print graphic attributes	along with the
	       text.  A	real DEC VTxxx	terminal  will	print  the  underline,
	       highlighting  codes  but	 your printer may not handle these.  A
	       ``0'' disables the attributes.  A ``1'' prints the  normal  set
	       of   attributes	 (bold,	  underline,  inverse  and  blink)  as
	       VT100-style control  sequences.	 A  ``2''  prints  ANSI	 color
	       attributes as well.  The	default	is ``1.''

       printerAutoClose	(class PrinterAutoClose)
	       If  ``true'',  xterm  will  close the printer (a	pipe) when the
	       application switches the	printer	offline	with a Media Copy com-
	       mand.  The default is ``false.''

       printerCommand (class PrinterCommand)
	       Specifies  a shell command to which xterm will open a pipe when
	       the first MC (Media Copy) command is initiated.	The default is
	       a  blank	 string.   If  the  resource value is given as a blank
	       string, the printer is disabled.

       printerControlMode (class PrinterControlMode)
	       Specifies the printer control mode.  A ``1'' selects  autoprint
	       mode,  which  causes xterm to print a line from the screen when
	       you move	the cursor off that line with a	line feed,  form  feed
	       or  vertical  tab  character, or	an autowrap occurs.  Autoprint
	       mode is overridden by printer controller	mode (a	``2''),	 which
	       causes  all  of	the output to be directed to the printer.  The
	       default is ``0.''

       printerExtent (class PrinterExtent)
	       Controls	whether	a print	page function will  print  the	entire
	       page  (true), or	only the the portion within the	scrolling mar-
	       gins (false).  The default is ``false.''

       printerFormFeed (class PrinterFormFeed)
	       Controls	whether	a form feed is sent to the printer at the  end
	       of a print page function.  The default is ``false.''

       renderFont (class RenderFont)
	       If  xterm  is built with	the Xft	library, this controls whether
	       the faceName resource is	used.  The default is ``true.''

       resizeGravity (class ResizeGravity)
	       Affects the behavior when the window is resized to be taller or
	       shorter.	  NorthWest specifies that the top line	of text	on the
	       screen stay fixed.  If the window is made  shorter,  lines  are
	       dropped	from  the  bottom; if the window is made taller, blank
	       lines are added at the bottom.  This  is	 compatible  with  the
	       behavior	 in  R4.   SouthWest  (the default) specifies that the
	       bottom line of text on the screen stay fixed.  If the window is
	       made  taller, additional	saved lines will be scrolled down onto
	       the screen; if the  window  is  made  shorter,  lines  will  be
	       scrolled	 off  the  top	of the screen, and the top saved lines
	       will be dropped.

       reverseVideo (class ReverseVideo)
	       Specifies whether or not	reverse	 video	should	be  simulated.
	       The default is ``false.''

       reverseWrap (class ReverseWrap)
	       Specifies  whether or not reverse-wraparound should be enabled.
	       This corresponds	to xterm's private mode	45.   The  default  is
	       ``false.''

       rightScrollBar (class RightScrollBar)
	       Specifies  whether  or not the scrollbar	should be displayed on
	       the right rather	than the left.	The default is ``false.''

       saveLines (class	SaveLines)
	       Specifies the number of lines to	save beyond  the  top  of  the
	       screen when a scrollbar is turned on.  The default is 64.

       scrollBar (class	ScrollBar)
	       Specifies  whether  or  not  the	scrollbar should be displayed.
	       The default is ``false.''

       scrollBarBorder (class ScrollBarBorder)
	       Specifies the width of the scrollbar border.  Note that this is
	       drawn to	overlap	the border of the xterm	window.	 Modifying the
	       scrollbar's border affects only the line	between	the VT100 wid-
	       get and the scrollbar.  The default value is 1.

       scrollKey (class	ScrollCond)
	       Specifies  whether  or  not pressing a key should automatically
	       cause the scrollbar to  go  to  the  bottom  of	the  scrolling
	       region.	 This  corresponds  to xterm's private mode 1011.  The
	       default is ``false.''

       scrollLines (class ScrollLines)
	       Specifies the number of lines that the scroll-back and  scroll-
	       forw actions should use as a default.  The default value	is 1.

       scrollTtyOutput (class ScrollCond)
	       Specifies whether or not	output to the terminal should automat-
	       ically cause the	scrollbar to go	to the bottom of the scrolling
	       region.	The default is ``true.''

       selectToClipboard (class	SelectToClipboard)
	       Tells  xterm whether to use the PRIMARY or CLIPBOARD for	SELECT
	       tokens in the selection mechanism.  The set-select  action  can
	       change this at runtime, allowing	the user to work with programs
	       that handle only	one  of	 these	mechanisms.   The  default  is
	       ``false'', which	tells it to use	PRIMARY.

       shiftFonts (class ShiftFonts)
	       Specifies  whether  to  enable the actions larger-vt-font() and
	       smaller-vt-font(), which	are  normally  bound  to  the  shifted
	       KP_Add and KP_Subtract.	The default is ``true.''

       showBlinkAsBold (class ShowBlinkAsBold)
	       Tells  xterm  whether  to display text with blink-attribute the
	       same as bold.  If xterm has  not	 been  configured  to  support
	       blinking	 text,	the default is ``true.'', which	corresponds to
	       older versions of xterm,	otherwise the default is ``false.''

       showMissingGlyphs (class	ShowMissingGlyphs)
	       Tells xterm whether to display a	box outlining places  where  a
	       character  has been used	that the font does not represent.  The
	       default is ``false.''

       signalInhibit (class SignalInhibit)
	       Specifies whether or not	the entries in	the  ``Main  Options''
	       menu  for  sending  signals to xterm should be disallowed.  The
	       default is ``false.''

       tekGeometry (class Geometry)
	       Specifies the preferred size and	position of the	Tektronix win-
	       dow.  There is no default for this resource.

       tekInhibit (class TekInhibit)
	       Specifies whether or not	the escape sequence to enter Tektronix
	       mode should be ignored.	The default is ``false.''

       tekSmall	(class TekSmall)
	       Specifies whether or not	the Tektronix mode window should start
	       in its smallest size if no explicit geometry is given.  This is
	       useful when running xterm on displays with small	screens.   The
	       default is ``false.''

       tekStartup (class TekStartup)
	       Specifies  whether  or  not  xterm should start up in Tektronix
	       mode.  The default is ``false.''

       tiXtraScroll (class TiXtraScroll)
	       Specifies whether xterm should scroll to	a new page  when  pro-
	       cessing	the ti termcap entry, i.e., the	private	modes 47, 1047
	       or 1049.	 This is only in effect	if  titeInhibit	 is  ``true'',
	       because	the  intent  of	this option is to provide a picture of
	       the full-screen application's display on	the scrollback without
	       wiping  out the text that would be shown	before the application
	       was initialized.	 The default for this resource is ``false.''

       titeInhibit (class TiteInhibit)
	       Specifies whether or not	xterm should remove ti and te  termcap
	       entries (used to	switch between alternate screens on startup of
	       many screen-oriented programs) from  the	 TERMCAP  string.   If
	       set,  xterm  also  ignores the escape sequence to switch	to the
	       alternate screen.  Xterm	supports terminfo in a different  way,
	       supporting  composite  control sequences	(also known as private
	       modes) 1047, 1048 and 1049 which	have the same  effect  as  the
	       original	47 control sequence.  The default for this resource is
	       ``false.''

       translations (class Translations)
	       Specifies the key and button bindings  for  menus,  selections,
	       ``programmed  strings,''	etc.  The translations resource, which
	       provides	much of	xterm's	configurability, is a feature of the X
	       Toolkit Intrinsics library (Xt).	 See the ACTIONS section.

       trimSelection (class TrimSelection)
	       If  you	set  highlightSelection, you can see the text which is
	       selected, including any trailing	spaces.	 Clearing  the	screen
	       (or  a  line)  resets it	to a state containing no spaces.  Some
	       lines may contain trailing spaces when  an  application	writes
	       them  to	 the screen.  However, you may not wish	to paste lines
	       with trailing spaces.  If this resource	is  true,  xterm  will
	       trim  trailing spaces from text which is	selected.  It does not
	       affect spaces which result in a wrapped line, nor will it  trim
	       the  trailing  newline  from  your  selection.	The default is
	       ``false.''

       underLine (class	UnderLine)
	       This specifies whether or not text with the underline attribute
	       should be underlined.  It may be	desirable to disable underlin-
	       ing when	color is being used for	the underline attribute.   The
	       default is ``true.''

       utf8 (class Utf8)
	       This  specifies	whether	 xterm will run	in UTF-8 mode.	If you
	       set this	resource, xterm	also sets the wideChars	resource as  a
	       side-effect.   The  resource  is	 an integer, expected to range
	       from 0 to 3:

	       0  UTF-8	mode is	initially off.	The  command-line  option  +u8
		  sets the resource to this value.  Escape sequences for turn-
		  ing UTF-8 mode on/off	are allowed.

	       1  UTF-8	mode is	initially on.  Escape  sequences  for  turning
		  UTF-8	mode on/off are	allowed.

	       2  The command-line option -u8 sets the resource	to this	value.
		  Escape sequences for turning UTF-8 mode on/off are ignored.

	       3  This is the default value of the resource.   It  is  changed
		  during   initialization  depending  on  whether  the	locale
		  resource was set, to 0 or 2.	See the	 locale	 resource  for
		  additional discussion	of non-UTF-8 locales.

	       If  you	want  to  set  the value of utf8, it should be in this
	       range.  Other nonzero values are	treated	 the  same  as	``1'',
	       i.e.,  UTF-8  mode  is  initially  on, and escape sequences for
	       turning UTF-8 mode on/off are allowed.

       utf8Fonts (class	Utf8Fonts)
	       See the discussion of the locale	resource.

       utf8Latin1 (class Utf8Latin1)
	       If true,	allow an ISO-8859-1 normal font	to be combined with an
	       ISO-10646 font if the latter is given via the -fw option	or its
	       corresponding resource value.  The default is ``false.''

       utf8Title (class	Utf8Title)
	       Applications  can  set  xterm's	title  by  writing  a  control
	       sequence.   Normally  this  control  sequence follows the VT220
	       convention, which encodes the string in ISO-8859-1  and	allows
	       for an 8-bit string terminator.	If xterm is started in a UTF-8
	       locale, it translates the ISO-8859-1 string to  UTF-8  to  work
	       with the	X libraries which assume the string is UTF-8.

	       However,	some users may wish to write a title string encoded in
	       UTF-8.  Set this	resource to ``true'' to	 allow	UTF-8  encoded
	       title strings.  That cancels the	translation to UTF-8, allowing
	       UTF-8 strings to	be displayed as	is.

	       The default is ``false.''

       veryBoldColors (class VeryBoldColors)
	       Specifies whether to combine video attributes with colors spec-
	       ified  by  colorBD, colorBL, colorRV and	colorUL.  The resource
	       value is	the sum	of values for each attribute:
		 1 for reverse,
		 2 for underline,
		 4 for bold and
		 8 for blink.

	       The default is ``0.''

       visualBell (class VisualBell)
	       Specifies whether or not	a visible bell (i.e., flashing)	should
	       be  used	instead	of an audible bell when	Control-G is received.
	       The default is ``false.''

       visualBellDelay (class VisualBellDelay)
	       Number of milliseconds to delay when displaying a visual	 bell.
	       Default	is  100.  If set to zero, no visual bell is displayed.
	       This is useful for very slow displays, e.g., an LCD display  on
	       a laptop.

       vt100Graphics (class VT100Graphics)
	       This specifies whether xterm will interpret VT100 graphic char-
	       acter escape sequences while in UTF-8  mode.   The  default  is
	       ``true'', to provide support for	various	legacy applications.

       wideBoldFont (class WideBoldFont)
	       This  option  specifies the font	to be used for displaying bold
	       wide text.  By default, it will attempt to use a	font twice  as
	       wide  as	 the  font that	will be	used to	draw bold text.	 If no
	       doublewidth font	is found, it will improvise, by	stretching the
	       bold font.

       wideChars (class	WideChars)
	       Specifies  if  xterm  should  respond to	control	sequences that
	       process 16-bit characters.  The default is ``false.''

       wideFont	(class WideFont)
	       This option specifies the font to be used for  displaying  wide
	       text.   By default, it will attempt to use a font twice as wide
	       as the font that	will be	used to	draw normal text.  If no  dou-
	       blewidth	 font  is  found, it will improvise, by	stretching the
	       normal font.

       ximFont (class XimFont)
	       This option specifies the font to be used  for  displaying  the
	       preedit string in the "OverTheSpot" input method.

	       In  "OverTheSpot"  preedit  type,  the  preedit (preconversion)
	       string is displayed at the position of the cursor.  It  is  the
	       XIM server's responsibility to display the preedit string.  The
	       XIM client must inform the XIM server of	the  cursor  position.
	       For  best  results, the preedit string must be displayed	with a
	       proper font.  Therefore,	xterm informs the XIM  server  of  the
	       proper  font.   The  font  is be	supplied by a "fontset", whose
	       default value is	"*".  This matches every font, the  X  library
	       automatically  chooses fonts with proper	charsets.  The ximFont
	       resource	is provided to override	this default font setting.

       The following resources are specified as	part  of  the  tek4014	widget
       (class	Tek4014).    These   are   specified   by   patterns  such  as
       "XTerm.tek4014.NAME":

       font2 (class Font)
	       Specifies font number 2 to use in the Tektronix window.

       font3 (class Font)
	       Specifies font number 3 to use in the Tektronix window.

       fontLarge (class	Font)
	       Specifies the large font	to use in the Tektronix	window.

       fontSmall (class	Font)
	       Specifies the small font	to use in the Tektronix	window.

       ginTerminator (class GinTerminator)
	       Specifies what character(s) should follow a GIN report or  sta-
	       tus  report.   The  possibilities  are ``none,''	which sends no
	       terminating  characters,	 ``CRonly,''  which  sends   CR,   and
	       ``CR&EOT,''  which  sends  both	CR  and	 EOT.	The default is
	       ``none.''

       height (class Height)
	       Specifies the height of the Tektronix window in pixels.

       initialFont (class InitialFont)
	       Specifies which of the four Tektronix fonts to  use  initially.
	       Values  are  the	 same  as  for	the  set-tek-text action.  The
	       default is ``large.''

       width (class Width)
	       Specifies the width of the Tektronix window in pixels.

       The resources that may be specified for the various menus are described
       in  the	documentation  for the Athena SimpleMenu widget.  The name and
       classes of  the	entries	 in  each  of  the  menus  are	listed	below.
       Resources  named	 "lineN" where N is a number are separators with class
       SmeLine.

       The mainMenu has	the following entries:

       toolbar (class SmeBSB)
	       This entry invokes the set-toolbar(toggle) action.

       securekbd (class	SmeBSB)
	       This entry invokes the secure() action.

       allowsends (class SmeBSB)
	       This entry invokes the allow-send-events(toggle)	action.

       redraw (class SmeBSB)
	       This entry invokes the redraw() action.

       logging (class SmeBSB)
	       This entry invokes the logging(toggle) action.

       print (class SmeBSB)
	       This entry invokes the print() action.

       print-redir (class SmeBSB)
	       This entry invokes the print-redir() action.

       8-bit-control (class SmeBSB)
	       This entry invokes the set-8-bit-control(toggle)	action.

       backarrow key (class SmeBSB)
	       This entry invokes the set-backarrow(toggle) action.

       num-lock	(class SmeBSB)
	       This entry invokes the set-num-lock(toggle) action.

       alt-esc (class SmeBSB)
	       This entry invokes the alt-sends-escape(toggle) action.

       meta-esc	(class SmeBSB)
	       This entry invokes the meta-sends-escape(toggle)	action.

       delete-is-del (class SmeBSB)
	       This entry invokes the delete-is-del(toggle) action.

       oldFunctionKeys (class SmeBSB)
	       This entry invokes the old-function-keys(toggle)	action.

       hpFunctionKeys (class SmeBSB)
	       This entry invokes the hp-function-keys(toggle) action.

       scoFunctionKeys (class SmeBSB)
	       This entry invokes the sco-function-keys(toggle)	action.

       sunFunctionKeys (class SmeBSB)
	       This entry invokes the sun-function-keys(toggle)	action.

       sunKeyboard (class SmeBSB)
	       This entry invokes the sunKeyboard(toggle) action.

       suspend (class SmeBSB)
	       This entry invokes the send-signal(tstp)	action on systems that
	       support job control.

       continue	(class SmeBSB)
	       This entry invokes the send-signal(cont)	action on systems that
	       support job control.

       interrupt (class	SmeBSB)
	       This entry invokes the send-signal(int) action.

       hangup (class SmeBSB)
	       This entry invokes the send-signal(hup) action.

       terminate (class	SmeBSB)
	       This entry invokes the send-signal(term)	action.

       kill (class SmeBSB)
	       This entry invokes the send-signal(kill)	action.

       quit (class SmeBSB)
	       This entry invokes the quit() action.

       The vtMenu has the following entries:

       scrollbar (class	SmeBSB)
	       This entry invokes the set-scrollbar(toggle) action.

       jumpscroll (class SmeBSB)
	       This entry invokes the set-jumpscroll(toggle) action.

       reversevideo (class SmeBSB)
	       This entry invokes the set-reverse-video(toggle)	action.

       autowrap	(class SmeBSB)
	       This entry invokes the set-autowrap(toggle) action.

       reversewrap (class SmeBSB)
	       This entry invokes the set-reversewrap(toggle) action.

       autolinefeed (class SmeBSB)
	       This entry invokes the set-autolinefeed(toggle) action.

       appcursor (class	SmeBSB)
	       This entry invokes the set-appcursor(toggle) action.

       appkeypad (class	SmeBSB)
	       This entry invokes the set-appkeypad(toggle) action.

       scrollkey (class	SmeBSB)
	       This entry invokes the set-scroll-on-key(toggle)	action.

       scrollttyoutput (class SmeBSB)
	       This entry invokes the set-scroll-on-tty-output(toggle) action.

       allow132	(class SmeBSB)
	       This entry invokes the set-allow132(toggle) action.

       cursesemul (class SmeBSB)
	       This entry invokes the set-cursesemul(toggle) action.

       visualbell (class SmeBSB)
	       This entry invokes the set-visualbell(toggle) action.

       poponbell (class	SmeBSB)
	       This entry invokes the set-poponbell(toggle) action.

       marginbell (class SmeBSB)
	       This entry invokes the set-marginbell(toggle) action.

       cursorblink (class SmeBSB)
	       This entry invokes the set-cursorblink(toggle) action.

       titeInhibit (class SmeBSB)
	       This entry invokes the set-titeInhibit(toggle) action.

       activeicon (class SmeBSB)
	       This entry toggles active icons on and off if this feature  was
	       compiled	 into  xterm.  It is enabled only if xterm was started
	       with the	command	line option +ai	or the activeIcon resource  is
	       set to ``True.''

       softreset (class	SmeBSB)
	       This entry invokes the soft-reset() action.

       hardreset (class	SmeBSB)
	       This entry invokes the hard-reset() action.

       clearsavedlines (class SmeBSB)
	       This entry invokes the clear-saved-lines() action.

       tekshow (class SmeBSB)
	       This entry invokes the set-visibility(tek,toggle) action.

       tekmode (class SmeBSB)
	       This entry invokes the set-terminal-type(tek) action.

       vthide (class SmeBSB)
	       This entry invokes the set-visibility(vt,off) action.

       altscreen (class	SmeBSB)
	       This entry invokes the set-altscreen(toggle) action.

       The fontMenu has	the following entries:

       fontdefault (class SmeBSB)
	       This entry invokes the set-vt-font(d) action.

       font1 (class SmeBSB)
	       This entry invokes the set-vt-font(1) action.

       font2 (class SmeBSB)
	       This entry invokes the set-vt-font(2) action.

       font3 (class SmeBSB)
	       This entry invokes the set-vt-font(3) action.

       font4 (class SmeBSB)
	       This entry invokes the set-vt-font(4) action.

       font5 (class SmeBSB)
	       This entry invokes the set-vt-font(5) action.

       font6 (class SmeBSB)
	       This entry invokes the set-vt-font(6) action.

       fontescape (class SmeBSB)
	       This entry invokes the set-vt-font(e) action.

       fontsel (class SmeBSB)
	       This entry invokes the set-vt-font(s) action.

       font-linedrawing	(class SmeBSB)
	       This entry invokes the set-font-linedrawing(s) action.

       font-doublesize (class SmeBSB)
	       This entry invokes the set-font-doublesize(s) action.

       render-font (class SmeBSB)
	       This entry invokes the set-render-font(s) action.

       utf8-mode (class	SmeBSB)
	       This entry invokes the set-utf8-mode(s) action.

       utf8-title (class SmeBSB)
	       This entry invokes the set-utf8-title(s)	action.

       The tekMenu has the following entries:

       tektextlarge (class SmeBSB)
	       This entry invokes the set-tek-text(l) action.

       tektext2	(class SmeBSB)
	       This entry invokes the set-tek-text(2) action.

       tektext3	(class SmeBSB)
	       This entry invokes the set-tek-text(3) action.

       tektextsmall (class SmeBSB)
	       This entry invokes the set-tek-text(s) action.

       tekpage (class SmeBSB)
	       This entry invokes the tek-page() action.

       tekreset	(class SmeBSB)
	       This entry invokes the tek-reset() action.

       tekcopy (class SmeBSB)
	       This entry invokes the tek-copy() action.

       vtshow (class SmeBSB)
	       This entry invokes the set-visibility(vt,toggle)	action.

       vtmode (class SmeBSB)
	       This entry invokes the set-terminal-type(vt) action.

       tekhide (class SmeBSB)
	       This entry invokes the set-visibility(tek,toggle) action.

       The  following  resources  are  useful  when  specified	for the	Athena
       Scrollbar widget:

       thickness (class	Thickness)
	       Specifies the width in pixels of	the scrollbar.

       background (class Background)
	       Specifies the color to use for the background of	the scrollbar.

       foreground (class Foreground)
	       Specifies the color to use for the foreground of	the scrollbar.
	       The ``thumb'' of	the scrollbar is a simple checkerboard pattern
	       alternating pixels for foreground and background	color.

POINTER	USAGE
       Once the	VT102 window is	created, xterm allows you to select  text  and
       copy it within the same or other	windows.

   SELECTION
       The  selection  functions are invoked when the pointer buttons are used
       with no modifiers, and when they	are used with the ``shift'' key.   The
       assignment  of the functions described below to keys and	buttons	may be
       changed through the resource database; see ACTIONS below.

       Pointer button one (usually left) is used to save  text	into  the  cut
       buffer.	 Move  the  cursor to beginning	of the text, and then hold the
       button down while moving	the cursor  to	the  end  of  the  region  and
       releasing the button.  The selected text	is highlighted and is saved in
       the global cut buffer and made the PRIMARY selection when the button is
       released.  Normally (but	see the	discussion of on2Clicks, etc):

	      -	 Double-clicking selects by words.

	      -	 Triple-clicking selects by lines.

	      -	 Quadruple-clicking goes back to characters, etc.

       Multiple-click is determined by the time	from button up to button down,
       so you can change the selection unit in	the  middle  of	 a  selection.
       Logical words and lines selected	by double- or triple-clicking may wrap
       across more than	one screen line	if lines were wrapped by xterm	itself
       rather  than by the application running in the window.  If the key/but-
       ton bindings specify that an X selection	is  to	be  made,  xterm  will
       leave  the selected text	highlighted for	as long	as it is the selection
       owner.

       Pointer button two (usually middle) `types' (pastes) the	text from  the
       PRIMARY	selection, if any, otherwise from the cut buffer, inserting it
       as keyboard input.

       Pointer button three (usually right)  extends  the  current  selection.
       (Without	loss of	generality, you	can swap ``right'' and ``left''	every-
       where in	the rest of this paragraph.)  If pressed while closer  to  the
       right  edge  of	the  selection than the	left, it extends/contracts the
       right edge of the selection.  If	you contract the  selection  past  the
       left  edge  of  the  selection, xterm assumes you really	meant the left
       edge, restores the original selection, then extends/contracts the  left
       edge  of	 the  selection.   Extension starts in the selection unit mode
       that the	last selection or extension was	performed in; you  can	multi-
       ple-click to cycle through them.

       By  cutting  and	pasting	pieces of text without trailing	new lines, you
       can take	text from several places in different windows and form a  com-
       mand  to	 the  shell,  for  example,  or	take output from a program and
       insert it into your favorite editor.  Since cut	buffers	 are  globally
       shared  among  different	 applications, you may regard each as a	`file'
       whose contents you know.	 The terminal emulator and other text programs
       should  be  treating  it	 as  if	it were	a text file, i.e., the text is
       delimited by new	lines.

   SCROLLING
       The scroll region displays the position and amount  of  text  currently
       showing	in  the	 window	 (highlighted)	relative to the	amount of text
       actually	saved.	As more	text is	saved (up to the maximum), the size of
       the highlighted area decreases.

       Clicking	 button	 one  with  the	pointer	in the scroll region moves the
       adjacent	line to	the top	of the display window.

       Clicking	button three moves the top line	of the display window down  to
       the pointer position.

       Clicking	 button	 two moves the display to a position in	the saved text
       that corresponds	to the pointer's position in the scrollbar.

   TEKTRONIX POINTER
       Unlike the VT102	window,	the Tektronix window does not allow the	 copy-
       ing  of	text.	It does	allow Tektronix	GIN mode, and in this mode the
       cursor will change from an arrow	to a cross.   Pressing	any  key  will
       send that key and the current coordinate	of the cross cursor.  Pressing
       button one, two,	or three will return the letters `l',  `m',  and  `r',
       respectively.   If  the `shift' key is pressed when a pointer button is
       pressed,	the corresponding upper	case letter is sent.  To distinguish a
       pointer	button	from  a	key, the high bit of the character is set (but
       this is bit is normally stripped	unless the terminal mode is  RAW;  see
       tty(4) for details).

MENUS
       Xterm  has  four	 menus,	named mainMenu,	vtMenu,	fontMenu, and tekMenu.
       Each menu pops up under the correct  combinations  of  key  and	button
       presses.	 Each menu is divided into sections, separated by a horizontal
       line.  Some menu	entries	correspond to modes that can  be  altered.   A
       check  mark appears next	to a mode that is currently active.  Selecting
       one of these modes toggles its state.  Other menu entries are commands;
       selecting one of	these performs the indicated function.

       All  of	the  menu entries correspond to	X actions.  In the list	below,
       the menu	label is shown followed	by the action's	name in	parenthesis.

   Main	Options
       The xterm mainMenu pops up when the ``control'' key and pointer	button
       one  are	 pressed  in a window.	This menu contains items that apply to
       both the	VT102 and Tektronix windows.  There are	several	sections:

       Commands	for managing X events:

	      Toolbar
		     Clicking on the "Toolbar" menu entry hides	the toolbar if
		     it	is visible, and	shows it if it is not.

	      Secure Keyboard (securekbd)
		     The  Secure Keyboard mode is helpful when typing in pass-
		     words or other sensitive data in an unsecure environment;
		     see SECURITY below	(but read the limitations carefully).

	      Allow SendEvents (allowsends )
		     Specifies	whether	or not synthetic key and button	events
		     generated using the X protocol SendEvent  request	should
		     be	 interpreted  or  discarded.   This corresponds	to the
		     allowSendEvents resource.

	      Redraw Window (redraw)
		     Forces the	X display to repaint; useful in	some  environ-
		     ments.

       Commands	for capturing output:

	      Log to File (logging)
		     Captures  text sent to the	screen in a logfile, as	in the
		     -l	logging	option.

	      Print Window (print)
		     Sends the text of the current window to the program given
		     in	the printerCommand resource.

	      Redirect to Printer (print-redir)
		     This  sets	the printerControlMode to 0 or 2.  You can use
		     this to turn the printer on as if an application had sent
		     the  appropriate control sequence.	 It is also useful for
		     switching the printer off if an application turns	it  on
		     without resetting the print control mode.

       Modes for setting keyboard style:

	      8-Bit Controls (8-bit-control)
		     Enabled  for VT220	emulation, this	controls whether xterm
		     will send 8-bit control sequences rather than using 7-bit
		     (ASCII)  controls,	 e.g.,	sending	 a  byte  in the range
		     128-159 rather than the escape character  followed	 by  a
		     second  byte.   Xterm  always  interprets	both 8-bit and
		     7-bit control sequences (see the document	Xterm  Control
		     Sequences).   This	 corresponds  to  the  eightBitControl
		     resource.

	      Backarrow	Key (BS/DEL) (backarrow	key)
		     Modifies the behavior of the  backarrow  key,  making  it
		     transmit  either  a backspace (8) or delete (127) charac-
		     ter.  This	corresponds to the backarrowKey	resource.

	      Alt/NumLock Modifiers (num-lock)
		     Controls the treatment of Alt- and	NumLock-key modifiers.
		     This corresponds to the numLock resource.

	      Meta Sends Escape	(meta-esc)
		     Controls whether Meta keys	are converted into a two-char-
		     acter sequence with the character itself preceded by ESC.
		     This corresponds to the metaSendsEscape resource.

	      Delete is	DEL (delete-is-del)
		     Controls  whether	the  Delete  key on the	editing	keypad
		     should send DEL (127) or the  VT220-style	Remove	escape
		     sequence.	This corresponds to the	deleteIsDEL resource.

	      Old Function-Keys	(oldFunctionKeys)

	      HP Function-Keys (hpFunctionKeys)

	      SCO Function-Keys	(scoFunctionKeys)

	      Sun Function-Keys	(sunFunctionKeys)

	      VT220 Keyboard (sunKeyboard)
		     These  act	as a radio-button, selecting one style for the
		     keyboard  layout.	 It  corresponds  to  more  than   one
		     resource  setting:	sunKeyboard, sunFunctionKeys, scoFunc-
		     tionKeys and hpFunctionKeys ."

       Commands	for process signalling:

	      Send STOP	Signal (suspend)

	      Send CONT	Signal (continue)

	      Send INT Signal (interrupt)

	      Send HUP Signal (hangup)

	      Send TERM	Signal (terminate)

	      Send KILL	Signal (kill)
		     These send	the SIGTSTP, SIGCONT, SIGINT, SIGHUP,  SIGTERM
		     and SIGKILL signals respectively, to the process group of
		     the process running under xterm (usually the shell).  The
		     SIGCONT  function	is  especially	useful if the user has
		     accidentally typed	CTRL-Z,	suspending the process.

	      Quit (quit)
		     Stop processing X events  except  to  support  the	 -hold
		     option,  and then send a SIGHUP signal to the the process
		     group of the process running  under  xterm	 (usually  the
		     shell).

   VT Options
       The  vtMenu sets	various	modes in the VT102 emulation, and is popped up
       when the	``control'' key	and pointer button  two	 are  pressed  in  the
       VT102 window.

       VT102/VT220 Modes:

	      Enable Scrollbar (scrollbar)
		     Enable  (or  disable) the scrollbar.  This	corresponds to
		     the -sb option and	the scrollBar resource.

	      Enable Jump Scroll (jumpscroll)
		     Enable (or	disable) jump scrolling.  This corresponds  to
		     the -j option and the jumpScroll resource.

	      Enable Reverse Video (reversevideo)
		     Enable  (or  disable) reverse-video.  This	corresponds to
		     the -rv option and	the reverseVideo resource.

	      Enable Auto Wraparound (autowrap)
		     Enable (or	disable) auto-wraparound.  This	corresponds to
		     the -aw option and	the autoWrap resource.

	      Enable Reverse Wraparound	(reversewrap)
		     Enable (or	disable) reverse wraparound.  This corresponds
		     to	the -rw	option and the reverseWrap resource.

	      Enable Auto Linefeed (autolinefeed)
		     Enable (or	disable) auto-linefeed.	 This is the VT102 NEL
		     function,	which  causes  the emulator to emit a linefeed
		     after each	carriage return.  There	 is  no	 corresponding
		     command-line option or resource setting.

	      Enable Application Cursor	Keys (appcursor)
		     Enable (or	disable) application cursor keys.  This	corre-
		     sponds to the appcursorDefault  resource.	 There	is  no
		     corresponding command-line	option.

	      Enable Application Keypad	(appkeypad)
		     Enable (or	disable) application keypad keys.  This	corre-
		     sponds to the appkeypadDefault  resource.	 There	is  no
		     corresponding command-line	option.

	      Scroll to	Bottom on Key Press (scrollkey)
		     Enable  (or  disable)  scrolling  to  the	bottom	of the
		     scrolling region on a keypress.  This corresponds to  the
		     -sk option	and the	scrollKey resource.

	      Scroll to	Bottom on Tty Output (scrollttyoutput)
		     Enable  (or  disable)  scrolling  to  the	bottom	of the
		     scrolling region on output	to the terminal..  This	corre-
		     sponds   to   the	-si  option  and  the  scrollTtyOutput
		     resource.

	      Allow 80/132 Column Switching (allow132)
		     Enable (or	disable) switching between 80 and 132 columns.
		     This   corresponds	 to  the  -132	option	and  the  c132
		     resource.

	      Select to	Clipboard (selectToClipboard)
		     Tell xterm	whether	to use the PRIMARY  or	CLIPBOARD  for
		     SELECT  tokens  in	 the  translations resource which maps
		     keyboard and mouse	actions	to select/paste	actions.  This
		     corresponds  to the selectToClipboard resource.  There is
		     no	corresponding command-line option.

	      Enable Visual Bell (visualbell)
		     Enable (or	disable) visible bell (i.e., flashing) instead
		     of	 an  audible bell.  This corresponds to	the -vb	option
		     and the visualBell	resource.

	      Enable Pop on Bell (poponbell)
		     Enable (or	disable) raising of the	window when  Control-G
		     is	received.  This	corresponds to the -pop	option and the
		     popOnBell resource.

	      Enable Margin Bell (marginbell)
		     Enable (or	disable) a bell	when the user types  near  the
		     right margin.  This corresponds to	the -mb	option and the
		     marginBell	resource.

	      Enable Blinking Cursor (cursorblink)
		     Enable (or	disable) the  blinking-cursor  feature.	  This
		     corresponds   to  the  -bc	 option	 and  the  cursorBlink
		     resource.	There is also an escape	sequence (see the doc-
		     ument  Xterm  Control Sequences).	The menu entry and the
		     escape sequence states are	XOR'd: if  both	 are  enabled,
		     the  cursor  will	not blink, if only one is enabled, the
		     cursor will blink.

	      Enable Alternate Screen Switching	(titeInhibit)
		     Enable (or	disable)  switching  between  the  normal  and
		     alternate	screens.   This	corresponds to the titeInhibit
		     resource.	There is no corresponding command-line option.

	      Enable Active Icon (activeicon)
		     Enable (or	disable) the active-icon feature.  This	corre-
		     sponds to the -ai option and the activeIcon resource.

       VT102/VT220 Commands:

	      Do Soft Reset (softreset)
		     Reset  scroll  regions.  This can be convenient when some
		     program has  left	the  scroll  regions  set  incorrectly
		     (often a problem when using VMS or	TOPS-20).  This	corre-
		     sponds to the VT220 DECSTR	control	sequence.

	      Do Full Reset (hardreset)
		     The full reset entry will clear the screen, reset tabs to
		     every  eight  columns, and	reset the terminal modes (such
		     as	wrap and smooth	scroll)	to their initial  states  just
		     after  xterm  has	finished  processing  the command line
		     options.  This  corresponds  to  the  VT102  RIS  control
		     sequence,	with  a	few obvious differences.  For example,
		     your session is not disconnected as a  real  VT102	 would
		     do.

	      Reset and	Clear Saved Lines (clearsavedlines)
		     Perform a full reset, and also clear the saved lines.

       Commands	for setting the	current	screen:

	      Show Tek Window (tekshow)
		     When enabled, pops	the Tektronix 4014 window up (makes it
		     visible).	When disabled, hides the Tektronix  4014  win-
		     dow.

	      Switch to	Tek Mode (tekmode)
		     When  enabled, pops the Tektronix 4014 window up if it is
		     not already visible, and switches	the  input  stream  to
		     that  window.   When  disabled,  hides the	Tektronix 4014
		     window and	switches input back to the VTxxx window.

	      Hide VT Window (vthide)
		     When enabled, hides the VTxxx window, shows the Tektronix
		     4014  window  if  it was not already visible and switches
		     the input stream to that window.	When  disabled,	 shows
		     the  VTxxx	 window, and switches the input	stream to that
		     window.

	      Show Alternate Screen (altscreen)
		     When enabled, shows the alternate screen.	When disabled,
		     shows the normal screen.  Note that the normal screen may
		     have saved	lines; the alternate screen does not.

   VT Fonts
       The fontMenu pops up when when the ``control'' key and  pointer	button
       three are pressed in a window.  It sets the font	used in	the VT102 win-
       dow, or modifies	the way	the font is specified or displayed.  There are
       three sections.

       The  first section allows you to	select the font	from a set of alterna-
       tives:

	      Default (fontdefault)
		     Set the font to the default,  i.e.,  that	given  by  the
		     *VT100.font resource.

	      Unreadable (font1)
		     Set the font to that given	by the *VT100.font1 resource.

	      Tiny (font2)
		     Set the font to that given	by the *VT100.font2 resource.

	      Small (font3)
		     Set the font to that given	by the *VT100.font3 resource.

	      Medium (font4)
		     Set the font to that given	by the *VT100.font4 resource.

	      Large (font5)
		     Set the font to that given	by the *VT100.font5 resource.

	      Huge (font6)
		     Set the font to that given	by the *VT100.font6 resource.

	      Escape Sequence
		     This allows you to	set the	font last specified by the Set
		     Font escape sequence  (see	 the  document	Xterm  Control
		     Sequences).

	      Selection	(fontsel)
		     This  allows  you	to  set	the font specified the current
		     selection as a font name (if  the	PRIMARY	 selection  is
		     owned).

       The second section allows you to	modify the way it is displayed:

	      Line-Drawing Characters (font-linedrawing)
		     When  set,	tells xterm to draw its	own line-drawing char-
		     acters.  Otherwise	 it  relies  on	 the  font  containing
		     these.  Compare to	the forceBoxChars resource.

	      Doublesized Characters (font-doublesize)
		     When set, xterm may ask the font server to	produce	scaled
		     versions of the normal font, for VT102 double-size	 char-
		     acters.

       The third section allows	you to modify the way it is specified:

	      TrueType Fonts (render-font)
		     If	 the  renderFont and corresponding resources were set,
		     this is a further control whether xterm will actually use
		     the Xft library calls to obtain a font.

	      UTF-8 (utf8-mode)
		     This  controls  whether  xterm  uses  UTF-8  encoding  of
		     input/output.  It is  useful  for	temporarily  switching
		     xterm  to display text from an application	which does not
		     follow the	locale settings.

   TEK Options
       The tekMenu sets	various	modes  in  the	Tektronix  emulation,  and  is
       popped  up  when	the ``control''	key and	pointer	button two are pressed
       in the Tektronix	window.	 The current font size is checked in the modes
       section of the menu.

	      Large Characters (tektextlarge)

	      #2 Size Characters (tektext2)

	      #3 Size Characters (tektext3)

	      Small Characters (tektextsmall)

       Commands:

	      PAGE (tekpage)
		     Clear the Tektronix window.

	      RESET (tekreset)

	      COPY (tekcopy)

       Windows:

	      Show VT Window (vtshow)

	      Switch to	VT Mode	(vtmode)

	      Hide Tek Window (tekhide)

SECURITY
       X  environments	differ in their	security consciousness.	 Most servers,
       run under xdm, are capable of using a  ``magic  cookie''	 authorization
       scheme that can provide a reasonable level of security for many people.
       If your server is only using a host-based mechanism to  control	access
       to  the server (see xhost(1)), then if you enable access	for a host and
       other users are also permitted to run clients on	that same host,	it  is
       possible	 that someone can run an application which uses	the basic ser-
       vices of	the X protocol to snoop	on your	activities,  potentially  cap-
       turing  a  transcript  of  everything  you  type	 at the	keyboard.  Any
       process which has access	to your	X display can manipulate  it  in  ways
       that you	might not anticipate, even redirecting your keyboard to	itself
       and sending events to your application's	windows.  This	is  true  even
       with  the ``magic cookie'' authorization	scheme.	 While the allowSendE-
       vents provides some protection  against	rogue  applications  tampering
       with your programs, guarding against a snooper is harder.

       The  possibility	of an application spying on your keystrokes is of par-
       ticular concern when you	want to	type in	a password or other  sensitive
       data.   The best	solution to this problem is to use a better authoriza-
       tion mechanism than is provided by X.  Given all	of  these  caveats,  a
       simple mechanism	exists for protecting keyboard input in	xterm.

       The  xterm  menu	 (see  MENUS  above)  contains a Secure	Keyboard entry
       which, when enabled, attempts to	ensure	that  all  keyboard  input  is
       directed	only to	xterm (using the GrabKeyboard protocol request).  When
       an application prompts you for a	password (or  other  sensitive	data),
       you  can	 enable	 Secure	Keyboard using the menu, type in the data, and
       then disable Secure Keyboard using the menu again.  This	 ensures  that
       you  know  which	window is accepting your keystrokes.  It cannot	ensure
       that there are no processes which have access to	your  X	 display  that
       might be	observing the keystrokes as well.

       Only  one X client at a time can	grab the keyboard, so when you attempt
       to enable Secure	Keyboard it may	fail.  In this	case,  the  bell  will
       sound.	If the Secure Keyboard succeeds, the foreground	and background
       colors will be exchanged	(as if you selected the	Reverse	Video entry in
       the  Modes  menu);  they	 will  be exchanged again when you exit	secure
       mode.  If the colors do not switch, then	you should be very  suspicious
       that  you  are  being spoofed.  If the application you are running dis-
       plays a prompt before asking for	the password, it is  safest  to	 enter
       secure mode before the prompt gets displayed, and to make sure that the
       prompt gets displayed correctly (in the new colors),  to	 minimize  the
       probability of spoofing.	 You can also bring up the menu	again and make
       sure that a check mark appears next to the entry.

       Secure Keyboard mode will be disabled automatically if your xterm  win-
       dow  becomes  iconified	(or  otherwise unmapped), or if	you start up a
       reparenting window manager (that	places a title bar or other decoration
       around  the  window) while in Secure Keyboard mode.  (This is a feature
       of the X	protocol not easily overcome.)	When this happens,  the	 fore-
       ground  and  background	colors will be switched	back and the bell will
       sound in	warning.

CHARACTER CLASSES
       Clicking	the left mouse button twice in rapid succession	(double-click-
       ing)  causes  all  characters  of  the same class (e.g.,	letters, white
       space, punctuation) to be selected as a ``word''.  Since	different peo-
       ple  have  different preferences	for what should	be selected (for exam-
       ple, should filenames be	selected as a whole or only the	separate  sub-
       names),	the  default  mapping can be overridden	through	the use	of the
       charClass (class	CharClass) resource.

       This resource is	a series of comma-separated of range:value pairs.  The
       range is	either a single	number or low-high in the range	of 0 to	65535,
       corresponding to	the code for the character or characters  to  be  set.
       The  value  is arbitrary, although the default table uses the character
       number of the first character occurring in the set.  When not in	 UTF-8
       mode, only the first 256	bytes of this table will be used.

       The  default table starts as follows - static int charClass[256]	= { /*
       NUL  SOH	 STX  ETX  EOT	ENQ  ACK  BEL */
	   32,	 1,   1,   1,	1,   1,	  1,   1, /*  BS   HT	NL    VT    NP
       CR   SO	 SI */
	    1,	 32,	1,   1,	  1,   1,   1,	 1, /* DLE  DC1	 DC2  DC3  DC4
       NAK  SYN	 ETB */
	    1,	 1,   1,   1,	1,   1,	  1,   1, /* CAN   EM  SUB   ESC    FS
       GS   RS	 US */
	    1,	  1,	1,   1,	  1,   1,   1,	 1, /*	SP    !	   "	#    $
       %    &	 ' */
	   32,	33,  34,  35,  36,  37,	 38,  39, /*   (    )	 *     +     ,
       -    .	 / */
	   40,	 41,   42,  43,	 44,  45,  46,	47, /*	 0    1	   2	3    4
       5    6	 7 */
	   48,	48,  48,  48,  48,  48,	 48,  48, /*   8    9	 :     ;     <
       =    >	 ? */
	   48,	 48,   58,  59,	 60,  61,  62,	63, /*	 @    A	   B	C    D
       E    F	 G */
	   64,	48,  48,  48,  48,  48,	 48,  48, /*   H    I	 J     K     L
       M    N	 O */
	   48,	 48,   48,  48,	 48,  48,  48,	48, /*	 P    Q	   R	S    T
       U    V	 W */
	   48,	48,  48,  48,  48,  48,	 48,  48, /*   X    Y	 Z     [     \
       ]    ^	 _ */
	   48,	 48,   48,  91,	 92,  93,  94,	48, /*	 `    a	   b	c    d
       e    f	 g */
	   96,	48,  48,  48,  48,  48,	 48,  48, /*   h    i	 j     k     l
       m    n	 o */
	   48,	 48,   48,  48,	 48,  48,  48,	48, /*	 p    q	   r	s    t
       u    v	 w */
	   48,	48,  48,  48,  48,  48,	 48,  48, /*   x    y	 z     {     |
       }    ~  DEL */
	   48,	 48,   48, 123,	124, 125, 126,	 1, /* x80  x81	 x82  x83  IND
       NEL  SSA	 ESA */
	    1,	 1,   1,   1,	1,   1,	  1,   1, /* HTS  HTJ  VTS   PLD   PLU
       RI  SS2	SS3 */
	    1,	  1,	1,   1,	  1,   1,   1,	 1, /* DCS  PU1	 PU2  STS  CCH
       MW  SPA	EPA */
	    1,	 1,   1,   1,	1,   1,	  1,   1, /* x98  x99  x9A   CSI    ST
       OSC   PM	 APC */
	    1,	  1,	1,   1,	  1,   1,   1,	 1, /*	 -    i	  c/	L   ox
       Y-    |	 So */
	  160, 161, 162, 163, 164, 165,	166, 167, /*  ..   c0	ip    <<     _
       R0    - */
	  168,	169,  170, 171,	172, 173, 174, 175, /*	 o   +-	   2	3    '
       u   q|	 . */
	  176, 177, 178, 179, 180, 181,	182, 183, /*   ,    1	 2    >>   1/4
       1/2  3/4	   ? */
	  184,	185,  186, 187,	188, 189, 190, 191, /*	A`   A'	  A^   A~   A:
       Ao   AE	 C, */
	   48,	48,  48,  48,  48,  48,	 48,  48, /*  E`   E'	E^    E:    I`
       I'   I^	 I: */
	   48,	 48,   48,  48,	 48,  48,  48,	48, /*	D-   N~	  O`   O'   O^
       O~   O:	  X */
	   48,	48,  48,  48,  48,  48,	 48, 215, /*  O/   U`	U'    U^    U:
       Y'    P	  B */
	   48,	 48,   48,  48,	 48,  48,  48,	48, /*	a`   a'	  a^   a~   a:
       ao   ae	 c, */
	   48,	48,  48,  48,  48,  48,	 48,  48, /*  e`   e'	e^   e:	    i`
       i'   i^	 i: */
	   48,	 48,   48,  48,	 48,  48,  48,	48, /*	 d   n~	  o`   o'   o^
       o~   o:	 -: */
	   48,	48,  48,  48,  48,  48,	 48, 247, /*  o/   u`	u'    u^    u:
       y'    P	 y: */
	   48,	 48,   48,   48,   48,	48,  48,  48}; For example, the	string
       ``33:48,37:48,45-47:48,38:48'' indicates	 that  the  exclamation	 mark,
       percent	sign,  dash, period, slash, and	ampersand characters should be
       treated the same	way as characters and numbers.	 This  is  useful  for
       cutting and pasting electronic mailing addresses	and filenames.

ACTIONS
       It  is  possible	 to  rebind  keys  (or sequences of keys) to arbitrary
       strings for input, by changing the translations resources for the vt100
       or  tek4014  widgets.   Changing	 the  translations resource for	events
       other than key and button events	is not expected, and will cause	unpre-
       dictable	 behavior.   The following actions are provided	for use	within
       the vt100 or tek4014 translations resources:

       allow-send-events(on/off/toggle)
	       This action set or toggles the allowSendEvents resource and  is
	       also invoked by the allowsends entry in mainMenu.

       alt-sends-escape()
	       This action toggles the state of	the eightBitInput resource.

       bell([percent])
	       This action rings the keyboard bell at the specified percentage
	       above or	below the base volume.

       clear-saved-lines()
	       This action does	hard-reset() (see below) and also  clears  the
	       history	of  lines saved	off the	top of the screen.  It is also
	       invoked from the	clearsavedlines	entry in vtMenu.   The	effect
	       is identical to a hardware reset	(RIS) control sequence.

       create-menu(m/v/f/t)
	       This  action  creates one of the	menus used by xterm, if	it has
	       not been	previously created.  The parameter values are the menu
	       names: mainMenu,	vtMenu,	fontMenu, tekMenu, respectively.

       dabbrev-expand()
	       Expands	the  word  before cursor by searching in the preceding
	       text on the screen and  in  the	scrollback  buffer  for	 words
	       starting	 with  that  abbreviation.  Repeating dabbrev-expand()
	       several times in	sequence searches for an alternative expansion
	       by looking farther back.	 Lack of more matches is signaled by a
	       beep().	Attempts to expand an empty word (i.e.,	when cursor is
	       preceded	 by  a	space)	yield successively all previous	words.
	       Consecutive identical expansions	are ignored.  The word here is
	       defined	as a sequence of non-whitespace	characters.  This fea-
	       ture partially emulates the behavior of `dynamic	 abbreviation'
	       expansion  in  Emacs  (bound there to M-/).  Here is a resource
	       setting for xterm which will do the same	thing: *VT100*transla-
	       tions:	 #override \n\	    Meta <KeyPress> /:dabbrev-expand()

       deiconify()
	       Changes the window state	back to	normal,	if it was iconified.

       delete-is-del()
	       This action toggles the state of	the deleteIsDEL	resource.

       dired-button()
	       Handles	a button event (other than press and release) by echo-
	       ing the event's position	(i.e., character line and  column)  in
	       the following format:

		       ^X ESC G	<line+'	'> <col+' '>

       iconify()
	       Iconifies the window.

       hard-reset()
	       This action resets the scrolling	region,	tabs, window size, and
	       cursor keys and clears the screen.  It is also invoked from the
	       hardreset entry in vtMenu.

       ignore()
	       This  action  ignores  the event	but checks for special pointer
	       position	escape sequences.

       insert()
	       This action inserts the character or string associated with the
	       key that	was pressed.

       insert-eight-bit()
	       This  action inserts an eight-bit (Meta)	version	of the charac-
	       ter or string associated	with the key that was  pressed.	  This
	       only  applies  to single-byte values.  The exact	action depends
	       on the value  of	 the  metaSendsEscape  and  the	 eightBitInput
	       resources.  The metaSendsEscape resource	is tested first.

	       The  term  "eight-bit" is misleading: xterm checks if the key's
	       value is	less than 128.	If so, xterm adds 128  to  the	value,
	       setting	its  eighth  bit.   Otherwise  xterm sends an ESC byte
	       before the key.	In other applications' documentation, that  is
	       referred	to as a	"meta key".

       insert-selection(sourcename [, ...])
	       This  action  inserts the string	found in the selection or cut-
	       buffer indicated	by sourcename.	Sources	 are  checked  in  the
	       order  given  (case  is	significant) until one is found.  Com-
	       monly-used selections include: PRIMARY,	SECONDARY,  and	 CLIP-
	       BOARD.	Cut  buffers  are  typically named CUT_BUFFER0 through
	       CUT_BUFFER7.

       insert-seven-bit()
	       This action is a	synonym	for insert() The term  "seven-bit"  is
	       misleading:  it only implies that xterm does not	try to add 128
	       to the key's value as in	insert-eight-bit().

       interpret(control-sequence)
	       Interpret the given control  sequence  locally,	i.e.,  without
	       passing	it  to	the host.  This	works by inserting the control
	       sequence	at the front of	the input buffer.  Use "\"  to	escape
	       octal  digits  in  the  string.	Xt does	not allow you to put a
	       null character (i.e., "\000") in	the string.

       keymap(name)
	       This action dynamically defines a new translation  table	 whose
	       resource	 name is name with the suffix Keymap (case is signifi-
	       cant).  The name	None restores the original translation table.

       larger-vt-font()
	       Set the font to the next	larger one, based on the  font	dimen-
	       sions.  See also	set-vt-font().

       load-vt-fonts(name[,class])
	       Load fontnames from the given subresource name and class.  That
	       is, load	the "*VT100.name.font",	resource as "*VT100.font" etc.
	       If no name is given, the	original set of	fontnames is restored.

	       Unlike  set-vt-font(),  this  does  not	affect the escape- and
	       select-fonts, since those are not based on resource values.  It
	       does  affect  the fonts loosely organized under the ``Default''
	       menu entry: font, boldFont, wideFont and	wideBoldFont.

       maximize()
	       Resizes the window to fill the screen.

       meta-sends-escape()
	       This action toggles the state of	the metaSendsEscape resource.

       popup-menu(menuname)
	       This action displays the	specified  popup  menu.	  Valid	 names
	       (case is	significant) include:  mainMenu, vtMenu, fontMenu, and
	       tekMenu.

       print() This action prints the window and is also invoked by the	 print
	       entry in	mainMenu.

       print-redir()
	       This  action  toggles  the  printerControlMode between 0	and 2.
	       The corresponding popup menu entry is useful for	switching  the
	       printer off if you happen to change your	mind after deciding to
	       print random binary files on the	terminal.

       quit()  This action sends a SIGHUP to the subprogram and	exits.	It  is
	       also invoked by the quit	entry in mainMenu.

       redraw()
	       This  action  redraws  the  window  and	is also	invoked	by the
	       redraw entry in mainMenu.

       restore()
	       Restores	the window to the size before it was last maximized.

       scroll-back(count [,units [,mouse] ])
	       This action scrolls the text window backward so that text  that
	       had  previously scrolled	off the	top of the screen is now visi-
	       ble.

	       The count argument indicates the	number of units	(which may  be
	       page, halfpage, pixel, or line) by which	to scroll.

	       An  adjustment can be specified for these values	by appending a
	       "+" or "-" sign followed	by a number, e.g., page-2 to specify 2
	       lines less than a page.

	       If  the	third  parameter mouse is given, the action is ignored
	       when mouse reporting is enabled.

       scroll-forw(count [,units [,mouse] ])
	       This action is similar to scroll-back except that it scrolls in
	       the other direction.

       secure()
	       This  action  toggles the Secure	Keyboard mode described	in the
	       section named SECURITY, and is invoked from the securekbd entry
	       in mainMenu.

       select-cursor-end(destname [, ...])
	       This  action  is	similar	to select-end except that it should be
	       used with select-cursor-start.

       select-cursor-start()
	       This action is similar to select-start except  that  it	begins
	       the selection at	the current text cursor	position.

       select-end(destname [, ...])
	       This  action  puts  the currently selected text into all	of the
	       selections or cutbuffers	specified by destname.

       select-extend()
	       This action tracks the pointer and extends the  selection.   It
	       should only be bound to Motion events.

       select-set()
	       This  action stores text	that corresponds to the	current	selec-
	       tion, without affecting the selection mode.

       select-start()
	       This action begins text selection at the	current	pointer	 loca-
	       tion.  See the section on POINTER USAGE for information on mak-
	       ing selections.

       send-signal(signame)
	       This action sends the signal named by signame to	the xterm sub-
	       process	(the  shell  or	 program specified with	the -e command
	       line option) and	is also	 invoked  by  the  suspend,  continue,
	       interrupt,  hangup,  terminate,	and  kill entries in mainMenu.
	       Allowable signal	names are (case	is not significant): tstp  (if
	       supported  by  the  operating  system), suspend (same as	tstp),
	       cont (if	supported by the operating system),  int,  hup,	 term,
	       quit, alrm, alarm (same as alrm)	and kill.

       set-allow132(on/off/toggle)
	       This  action toggles the	c132 resource and is also invoked from
	       the allow132 entry in vtMenu.

       set-altscreen(on/off/toggle)
	       This action toggles between the alternate and current screens.

       set-appcursor(on/off/toggle)
	       This action toggles the handling	Application  Cursor  Key  mode
	       and is also invoked by the appcursor entry in vtMenu.

       set-appkeypad(on/off/toggle)
	       This action toggles the handling	of Application Keypad mode and
	       is also invoked by the appkeypad	entry in vtMenu.

       set-autolinefeed(on/off/toggle)
	       This action toggles automatic insertion	of  linefeeds  and  is
	       also invoked by the autolinefeed	entry in vtMenu.

       set-autowrap(on/off/toggle)
	       This  action  toggles  automatic	 wrapping of long lines	and is
	       also invoked by the autowrap entry in vtMenu.

       set-backarrow(on/off/toggle)
	       This action toggles  the	 backarrowKey  resource	 and  is  also
	       invoked from the	backarrow key entry in vtMenu.

       set-cursorblink(on/off/toggle)
	       This  action  toggles  the  cursorBlink	resource  and  is also
	       invoked from the	cursorblink entry in vtMenu.

       set-cursesemul(on/off/toggle)
	       This action toggles the curses resource	and  is	 also  invoked
	       from the	cursesemul entry in vtMenu.

       set-font-doublesize(on/off/toggle)
	       This  action  toggles  the  fontDoublesize resource and is also
	       invoked by the font-doublesize entry in fontMenu.

       set-hp-function-keys(on/off/toggle)
	       This action toggles the hpFunctionKeys  resource	 and  is  also
	       invoked by the hpFunctionKeys entry in mainMenu.

       set-jumpscroll(on/off/toggle)
	       This action toggles the jumpscroll resource and is also invoked
	       by the jumpscroll entry in vtMenu.

       set-font-linedrawing(on/off/toggle)
	       This action toggles the xterm's	state  regarding  whether  the
	       current	font has line-drawing characters and whether it	should
	       draw them directly.  It is also invoked by the font-linedrawing
	       entry in	fontMenu.

       set-logging()
	       This action toggles the state of	the logging option.

       set-old-function-keys(on/off/toggle)
	       This  action  toggles  the state	of legacy function keys	and is
	       also invoked by the oldFunctionKeys entry in mainMenu.

       set-marginbell(on/off/toggle)
	       This action toggles the marginBell resource and is also invoked
	       from the	marginbell entry in vtMenu.

       set-num-lock()
	       This action toggles the state of	the numLock resource.

       set-pop-on-bell(on/off/toggle)
	       This  action toggles the	popOnBell resource and is also invoked
	       by the poponbell	entry in vtMenu.

       set-render-font(on/off/toggle)
	       This action toggles the renderFont resource and is also invoked
	       by the render-font entry	in fontMenu.

       set-reverse-video(on/off/toggle)
	       This  action  toggles  the  reverseVideo	 resource  and is also
	       invoked by the reversevideo entry in vtMenu.

       set-reversewrap(on/off/toggle)
	       This action  toggles  the  reverseWrap  resource	 and  is  also
	       invoked by the reversewrap entry	in vtMenu.

       set-scroll-on-key(on/off/toggle)
	       This  action toggles the	scrollKey resource and is also invoked
	       from the	scrollkey entry	in vtMenu.

       set-scroll-on-tty-output(on/off/toggle)
	       This action toggles the scrollTtyOutput resource	 and  is  also
	       invoked from the	scrollttyoutput	entry in vtMenu.

       set-scrollbar(on/off/toggle)
	       This  action toggles the	scrollbar resource and is also invoked
	       by the scrollbar	entry in vtMenu.

       set-select(on/off/toggle)
	       This action toggles the selectToClipboard resource and is  also
	       invoked by the selectToClipboard	entry in vtMenu.

       set-sco-function-keys(on/off/toggle)
	       This  action  toggles  the scoFunctionKeys resource and is also
	       invoked by the scoFunctionKeys entry in mainMenu.

       set-sun-function-keys(on/off/toggle)
	       This action toggles the sunFunctionKeys resource	 and  is  also
	       invoked by the sunFunctionKeys entry in mainMenu.

       set-sun-keyboard(on/off/toggle)
	       This  action  toggles  the  sunKeyboard	resource  and  is also
	       invoked by the sunKeyboard entry	in mainMenu.

       set-tek-text(large/2/3/small)
	       This action sets	font used in the Tektronix window to the value
	       of  the	resources  tektextlarge,  tektext2, tektext3, and tek-
	       textsmall according to the argument.  It	is also	by the entries
	       of the same names as the	resources in tekMenu.

       set-terminal-type(type)
	       This  action  directs  output  to either	the vt or tek windows,
	       according to the	type string.  It is also invoked by  the  tek-
	       mode entry in vtMenu and	the vtmode entry in tekMenu.

       set-titeInhibit(on/off/toggle)
	       This  action  toggles  the titeInhibit resource,	which controls
	       switching between the alternate and current screens.

       set-toolbar(on/off/toggle)
	       This action toggles the toolbar feature and is also invoked  by
	       the toolbar entry in mainMenu.

       set-utf8-mode(on/off/toggle)
	       This  action  toggles  the utf8 resource	and is also invoked by
	       the utf8-mode entry in fontMenu.

       set-utf8-title(on/off/toggle)
	       This action toggles the utf8Title resource and is also  invoked
	       by the utf8-title entry in fontMenu.

       set-visibility(vt/tek,on/off/toggle)
	       This  action  controls whether or not the vt or tek windows are
	       visible.	 It is	also  invoked  from  the  tekshow  and	vthide
	       entries	in  vtMenu  and	the vtshow and tekhide entries in tek-
	       Menu.

       set-visual-bell(on/off/toggle)
	       This action toggles the visualBell resource and is also invoked
	       by the visualbell entry in vtMenu.

       set-vt-font(d/1/2/3/4/5/6/e/s [,normalfont [, boldfont]])
	       This  action sets the font or fonts currently being used	in the
	       VT102 window.  The first	argument is a  single  character  that
	       specifies the font to be	used:

	       d  or D indicate	the default font (the font initially used when
		      xterm was	started),

	       1 through 6 indicate the	fonts specified	by the	font1  through
		      font6 resources,

	       e  or  E	 indicate the normal and bold fonts that have been set
		      through escape codes (or specified  as  the  second  and
		      third action arguments, respectively), and

	       s or S indicate the font	selection (as made by programs such as
		      xfontsel(1)) indicated by	the second action argument.

	       If xterm	is configured to support  wide	characters,  an	 addi-
	       tional  two  optional parameters	are recognized for the e argu-
	       ment: wide font and wide	bold font.

       smaller-vt-font()
	       Set the font to the next	smaller	one, based on the font	dimen-
	       sions.  See also	set-vt-font().

       soft-reset()
	       This  action  resets  the  scrolling region and is also invoked
	       from the	softreset entry	in vtMenu.  The	effect is identical to
	       a soft reset (DECSTR) control sequence.

       start-extend()
	       This  action  is	similar	to select-start	except that the	selec-
	       tion is extended	to the current pointer location.

       start-cursor-extend()
	       This action is similar to select-extend except that the	selec-
	       tion is extended	to the current text cursor position.

       string(string)
	       This action inserts the specified text string as	if it had been
	       typed.  Quotation is necessary if the  string  contains	white-
	       space  or  non-alphanumeric characters.	If the string argument
	       begins with the characters ``0x'', it is	interpreted as	a  hex
	       character constant.

       tek-copy()
	       This  action  copies the	escape codes used to generate the cur-
	       rent window contents to a file in the current directory	begin-
	       ning  with  the name COPY.  It is also invoked from the tekcopy
	       entry in	tekMenu.

       tek-page()
	       This action clears the Tektronix	window and is also invoked  by
	       the tekpage entry in tekMenu.

       tek-reset()
	       This  action resets the Tektronix window	and is also invoked by
	       the tekreset entry in tekMenu.

       vi-button()
	       Handles a button	event (other than press	and release) by	 echo-
	       ing a control sequence computed from the	event's	line number in
	       the screen relative to the current line:

		       ESC ^P
	       or
		       ESC ^N

	       according to whether the	event is before, or after the  current
	       line,  respectively.   The ^N (or ^P) is	repeated once for each
	       line that the event differs from	the current line.  The control
	       sequence	 is  omitted  altogether if the	button event is	on the
	       current line.

       visual-bell()
	       This action flashes the window quickly.

       The Tektronix window also has the following action:

       gin-press(l/L/m/M/r/R)
	       This action sends the indicated graphics	input code.

       The default bindings in the VT102 window	use the	SELECT token, which is
       set by the selectToClipboard resource:
		 Shift <KeyPress> Prior:scroll-back(1,halfpage)	\n\
		  Shift	<KeyPress> Next:scroll-forw(1,halfpage)	\n\
		Shift <KeyPress> Select:select-cursor-start() \
					select-cursor-end(SELECT, CUT_BUFFER0)
       \n\
		Shift <KeyPress> Insert:insert-selection(SELECT,  CUT_BUFFER0)
       \n\
	   Shift~Ctrl <KeyPress> KP_Add:larger-vt-font() \n\
	   Shift Ctrl <KeyPress> KP_Add:smaller-vt-font() \n\
	   Shift <KeyPress> KP_Subtract:smaller-vt-font() \n\
		       ~Meta <KeyPress>:insert-seven-bit() \n\
			Meta <KeyPress>:insert-eight-bit() \n\
		       !Ctrl <Btn1Down>:popup-menu(mainMenu) \n\
		  !Lock	Ctrl <Btn1Down>:popup-menu(mainMenu) \n\
	!Lock Ctrl @Num_Lock <Btn1Down>:popup-menu(mainMenu) \n\
	    ! @Num_Lock	Ctrl <Btn1Down>:popup-menu(mainMenu) \n\
		       ~Meta <Btn1Down>:select-start() \n\
		     ~Meta <Btn1Motion>:select-extend()	\n\
		       !Ctrl <Btn2Down>:popup-menu(vtMenu) \n\
		  !Lock	Ctrl <Btn2Down>:popup-menu(vtMenu) \n\
	!Lock Ctrl @Num_Lock <Btn2Down>:popup-menu(vtMenu) \n\
	    ! @Num_Lock	Ctrl <Btn2Down>:popup-menu(vtMenu) \n\
		 ~Ctrl ~Meta <Btn2Down>:ignore() \n\
			Meta <Btn2Down>:clear-saved-lines() \n\
		   ~Ctrl  ~Meta	<Btn2Up>:insert-selection(SELECT, CUT_BUFFER0)
       \n\
		       !Ctrl <Btn3Down>:popup-menu(fontMenu) \n\
		  !Lock	Ctrl <Btn3Down>:popup-menu(fontMenu) \n\
	!Lock Ctrl @Num_Lock <Btn3Down>:popup-menu(fontMenu) \n\
	    ! @Num_Lock	Ctrl <Btn3Down>:popup-menu(fontMenu) \n\
		 ~Ctrl ~Meta <Btn3Down>:start-extend() \n\
		     ~Meta <Btn3Motion>:select-extend()	\n\
			Ctrl <Btn4Down>:scroll-back(1,halfpage,m) \n\
		   Lock	Ctrl <Btn4Down>:scroll-back(1,halfpage,m) \n\
	 Lock @Num_Lock	Ctrl <Btn4Down>:scroll-back(1,halfpage,m) \n\
	      @Num_Lock	Ctrl <Btn4Down>:scroll-back(1,halfpage,m) \n\
			     <Btn4Down>:scroll-back(5,line,m)	  \n\
			Ctrl <Btn5Down>:scroll-forw(1,halfpage,m) \n\
		   Lock	Ctrl <Btn5Down>:scroll-forw(1,halfpage,m) \n\
	 Lock @Num_Lock	Ctrl <Btn5Down>:scroll-forw(1,halfpage,m) \n\
	      @Num_Lock	Ctrl <Btn5Down>:scroll-forw(1,halfpage,m) \n\
			     <Btn5Down>:scroll-forw(5,line,m)	  \n\
				<BtnUp>:select-end(SELECT, CUT_BUFFER0)	\n\
			      <BtnDown>:ignore()

       The default bindings in the Tektronix window are:
		       ~Meta<KeyPress>:	insert-seven-bit() \n\
			Meta<KeyPress>:	insert-eight-bit() \n\
		      !Ctrl <Btn1Down>:	popup-menu(mainMenu) \n\
		 !Lock Ctrl <Btn1Down>:	popup-menu(mainMenu)  \n\  !Lock  Ctrl
       @Num_Lock <Btn1Down>:popup-menu(mainMenu) \n\
	    !Ctrl @Num_Lock <Btn1Down>:popup-menu(mainMenu) \n\
		      !Ctrl <Btn2Down>:	popup-menu(tekMenu) \n\
		 !Lock	Ctrl  <Btn2Down>:  popup-menu(tekMenu)	\n\ !Lock Ctrl
       @Num_Lock <Btn2Down>:popup-menu(tekMenu)	\n\
	    !Ctrl @Num_Lock <Btn2Down>:popup-menu(tekMenu) \n\
		 Shift ~Meta<Btn1Down>:gin-press(L) \n\
		       ~Meta<Btn1Down>:gin-press(l) \n\
		 Shift ~Meta<Btn2Down>:gin-press(M) \n\
		       ~Meta<Btn2Down>:gin-press(m) \n\
		 Shift ~Meta<Btn3Down>:gin-press(R) \n\
		       ~Meta<Btn3Down>:gin-press(r)

       Here is an example which	uses shifted select/paste to copy to the clip-
       board,  and  unshifted select/paste for the primary selection.  In each
       case, a (different) cut buffer is  also	a  target  or  source  of  the
       select/paste  operation.	 It is important to remember however, that cut
       buffers store data in ISO-8859-1	encoding, while	selections  can	 store
       data  in	 a  variety  of	 formats  and encodings.  While	xterm owns the
       selection, it highlights	it.  When it loses the selection,  it  removes
       the  corresponding  highlight.  But you can still paste from the	corre-
       sponding	cut buffer.  *VT100*translations:    #override \n\
	   ~Shift~Ctrl<Btn2Up>:	insert-selection(PRIMARY, CUT_BUFFER0) \n\
	   Shift~Ctrl<Btn2Up>:	insert-selection(CLIPBOARD, CUT_BUFFER1) \n\
	   ~Shift<BtnUp>:	select-end(PRIMARY, CUT_BUFFER0) \n\
	   Shift<BtnUp>:	select-end(CLIPBOARD, CUT_BUFFER1)

       Below is	a sample how of	the keymap() action is	used  to  add  special
       keys  for entering commonly-typed works:	*VT100.Translations: #override
       <Key>F13:      keymap(dbx)	*VT100.dbxKeymap.translations:	     \
	    <Key>F14: keymap(None)	\n\	      <Key>F17:	string("next")
       string(0x0d)   \n\	 <Key>F18: string("step")   string(0x0d)   \n\
	    <Key>F19: string("continue")	    string(0x0d)	   \n\
	    <Key>F20: string("print ") insert-selection(PRIMARY, CUT_BUFFER0)

CONTROL	SEQUENCES AND KEYBOARD
       The Xterm Control Sequences document lists the control sequences	 which
       an  application	can  send xterm	to make	it perform various operations.
       Most of these operations	are standardized, from either the DEC or  Tek-
       tronix terminals, or from more widely used standards such as ISO	6429.

ENVIRONMENT
       Xterm sets several environment variables:

       DISPLAY
	    is	the  display name, pointing to the X server (see DISPLAY NAMES
	    in X(7)).

       TERM is set according to	the termcap (or	terminfo) entry	 which	it  is
	    using as a reference.

       WINDOWID
	    is set to the X window id number of	the xterm window.

       XTERM_SHELL
	    is	set  to	the pathname of	the program which is invoked.  Usually
	    that is a shell program, e.g., /bin/sh.  Since it is not necessar-
	    ily	a shell	program	however, it is distinct	from ``SHELL''.

       XTERM_VERSION
	    is	set  to	 the string displayed by the -version option.  That is
	    normally an	identifier for the X Window libraries  used  to	 build
	    xterm, followed by xterm's patch number in parenthesis.  The patch
	    number is  also  part  of  the  response  to  a  Secondary	Device
	    Attributes (DA) control sequence (see Xterm	Control	Sequences).

       Depending  on your system configuration,	xterm may also set the follow-
       ing:

       COLUMNS
	    the	width of the xterm in characters (cf: "stty columns").

       HOME when xterm is configured to	update utmp.

       LINES
	    the	height of the xterm in characters (cf: "stty rows").

       LOGNAME
	    when xterm is configured to	update utmp.

       SHELL
	    when xterm is configured to	update utmp.  It is also  set  if  you
	    provide the	shell name as the optional parameter.

       TERMCAP
	    the	 contents  of  the  termcap entry corresponding	to $TERM, with
	    lines and columns values substituted for the  actual  size	window
	    you	have created.

       TERMINFO
	    may	be defined to a	nonstandard location in	the configure script.

FILES
       The actual pathnames given may differ on	your system.

       /etc/utmp
	    the	system logfile,	which records user logins.

       /etc/wtmp
	    the	system logfile,	which records user logins and logouts.

       /usr/X11R6/lib/X11/app-defaults/XTerm
	    the	xterm default application resources.

       /usr/X11R6/lib/X11/app-defaults/XTerm-color
	    the	 xterm	color application resources.  If your display supports
	    color, use this
		      *customization: -color
	    in your .Xdefaults file to automatically use  this	resource  file
	    rather  than /usr/X11R6/lib/X11/app-defaults/XTerm.	 If you	do not
	    do this, xterm uses	its compiled-in	default	resource settings  for
	    colors.

ERROR MESSAGES
       Most of the fatal error messages	from xterm use the following format:
	      xterm: Error XXX,	errno YYY: ZZZ
       The  XXX	 codes	(which	are used by xterm as its exit-code) are	listed
       below, with a brief explanation.

       1    is used for	miscellaneous errors, usually accompanied  by  a  spe-
	    cific message,

       11   ERROR_FIONBIO
	    main: ioctl() failed on FIONBIO

       12   ERROR_F_GETFL
	    main: ioctl() failed on F_GETFL

       13   ERROR_F_SETFL
	    main: ioctl() failed on F_SETFL

       14   ERROR_OPDEVTTY
	    spawn: open() failed on /dev/tty

       15   ERROR_TIOCGETP
	    spawn: ioctl() failed on TIOCGETP

       17   ERROR_PTSNAME
	    spawn: ptsname() failed

       18   ERROR_OPPTSNAME
	    spawn: open() failed on ptsname

       19   ERROR_PTEM
	    spawn: ioctl() failed on I_PUSH/"ptem"

       20   ERROR_CONSEM
	    spawn: ioctl() failed on I_PUSH/"consem"

       21   ERROR_LDTERM
	    spawn: ioctl() failed on I_PUSH/"ldterm"

       22   ERROR_TTCOMPAT
	    spawn: ioctl() failed on I_PUSH/"ttcompat"

       23   ERROR_TIOCSETP
	    spawn: ioctl() failed on TIOCSETP

       24   ERROR_TIOCSETC
	    spawn: ioctl() failed on TIOCSETC

       25   ERROR_TIOCSETD
	    spawn: ioctl() failed on TIOCSETD

       26   ERROR_TIOCSLTC
	    spawn: ioctl() failed on TIOCSLTC

       27   ERROR_TIOCLSET
	    spawn: ioctl() failed on TIOCLSET

       28   ERROR_INIGROUPS
	    spawn: initgroups()	failed

       29   ERROR_FORK
	    spawn: fork() failed

       30   ERROR_EXEC
	    spawn: exec() failed

       32   ERROR_PTYS
	    get_pty: not enough	ptys

       34   ERROR_PTY_EXEC
	    waiting for	initial	map

       35   ERROR_SETUID
	    spawn: setuid() failed

       36   ERROR_INIT
	    spawn: can't initialize window

       46   ERROR_TIOCKSET
	    spawn: ioctl() failed on TIOCKSET

       47   ERROR_TIOCKSETC
	    spawn: ioctl() failed on TIOCKSETC

       48   ERROR_SPREALLOC
	    spawn: realloc of ttydev failed

       49   ERROR_LUMALLOC
	    luit: command-line malloc failed

       50   ERROR_SELECT
	    in_put: select() failed

       54   ERROR_VINIT
	    VTInit: can't initialize window

       57   ERROR_KMMALLOC1
	    HandleKeymapChange:	malloc failed

       60   ERROR_TSELECT
	    Tinput: select() failed

       64   ERROR_TINIT
	    TekInit: can't initialize window

       71   ERROR_BMALLOC2
	    SaltTextAway: malloc() failed

       80   ERROR_LOGEXEC
	    StartLog: exec() failed

       83   ERROR_XERROR
	    xerror: XError event

       84   ERROR_XIOERROR
	    xioerror: X	I/O error

       90   ERROR_SCALLOC
	    Alloc: calloc() failed on base

       91   ERROR_SCALLOC2
	    Alloc: calloc() failed on rows

       92   ERROR_SREALLOC
	    ScreenResize: realloc() failed on alt base

       96   ERROR_RESIZE
	    ScreenResize: malloc() or realloc()	failed

       102  ERROR_SAVE_PTR
	    ScrnPointers: malloc/realloc() failed

       110  ERROR_SBRALLOC
	    ScrollBarOn: realloc() failed on base

       111  ERROR_SBRALLOC2
	    ScrollBarOn: realloc() failed on rows

       121  ERROR_MMALLOC
	    my_memmove:	malloc/realloc failed

BUGS
       Large  pastes do	not work on some systems.  This	is not a bug in	xterm;
       it is a bug in the pseudo terminal  driver  of  those  systems.	 xterm
       feeds large pastes to the pty only as fast as the pty will accept data,
       but some	pty drivers do not return enough information to	 know  if  the
       write has succeeded.

       Many of the options are not resettable after xterm starts.

       This program still needs	to be rewritten.  It should be split into very
       modular sections, with the various emulators being completely  separate
       widgets	that  do not know about	each other.  Ideally, you'd like to be
       able to pick and	choose emulator	widgets	and stick them into  a	single
       control widget.

       There  needs  to	 be  a	dialog box to allow entry of the Tek COPY file
       name.

SEE ALSO
       resize(1), luit(1), X(7), pty(4), tty(4)
       Xterm Control Sequences (this is	the file ctlseqs.ms).

       http://invisible-island.net/xterm/xterm.html

AUTHORS
       Far too many people, including:

       Loretta Guarino Reid (DEC-UEG-WSL), Joel	McCormack (DEC-UEG-WSL), Terry
       Weissman	 (DEC-UEG-WSL),	 Edward	 Moy  (Berkeley), Ralph	R. Swick (MIT-
       Athena),	Mark Vandevoorde (MIT-Athena),	Bob  McNamara  (DEC-MAD),  Jim
       Gettys (MIT-Athena), Bob	Scheifler (MIT X Consortium), Doug Mink	(SAO),
       Steve Pitschke (Stellar), Ron Newman (MIT-Athena), Jim  Fulton  (MIT  X
       Consortium),  Dave  Serisky  (HP),  Jonathan Kamens (MIT-Athena), Jason
       Bacon, Stephen P. Wall, David Wexelblat,	 and  Thomas  Dickey  (XFree86
       Project).

XFree86				 Version 4.7.0			      XTERM(1)

NAME | SYNOPSIS | DESCRIPTION | EMULATIONS | OTHER FEATURES | OPTIONS | RESOURCES | POINTER USAGE | MENUS | SECURITY | CHARACTER CLASSES | ACTIONS | CONTROL SEQUENCES AND KEYBOARD | ENVIRONMENT | FILES | ERROR MESSAGES | BUGS | SEE ALSO | AUTHORS

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=xterm&sektion=1&manpath=XFree86+4.7.0>

home | help