Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
XTERM(1)			X Window System			      XTERM(1)

NAME
       xterm - terminal	emulator for X

SYNOPSIS
       xterm [-toolkitoption ...] [-option ...]	[shell]

DESCRIPTION
       The  xterm  program is a	terminal emulator for the X Window System.  It
       provides	DEC VT102/VT220	and selected features from higher-level	termi-
       nals  such  as  VT320/VT420/VT520  (VTxxx).  It also provides Tektronix
       4014 emulation for programs that	cannot use the window system directly.
       If the underlying operating system supports terminal resizing capabili-
       ties (for example, the SIGWINCH signal in systems derived from 4.3bsd),
       xterm  will use the facilities to notify	programs running in the	window
       whenever	it is resized.

       The VTxxx and Tektronix 4014 terminals each have	their  own  window  so
       that  you can edit text in one and look at graphics in the other	at the
       same time.  To maintain the correct aspect ratio	 (height/width),  Tek-
       tronix graphics will be restricted to the largest box with a 4014's as-
       pect ratio that will fit	in the window.	This box is located in the up-
       per left	area of	the window.

       Although	both windows may be displayed at the same time,	one of them is
       considered the "active" window for receiving keyboard input and	termi-
       nal output.  This is the	window that contains the text cursor.  The ac-
       tive window can be chosen through escape	sequences,  the	 "VT  Options"
       menu  in	 the VTxxx window, and the "Tek	Options" menu in the 4014 win-
       dow.

EMULATIONS
       The VT102 emulation is fairly complete, but does	 not  support  autore-
       peat.   Double-size  characters	are  displayed	properly  if your font
       server supports scalable	fonts.	The VT220 emulation does  not  support
       soft fonts, it is otherwise complete.

       Terminal	 database (terminfo (5)	or termcap (5))	entries	that work with
       xterm include

	      an optional platform-specific entry ("xterm"),
	      "xterm",
	      "vt102",
	      "vt100",
	      "ansi" and
	      "dumb"

       Xterm automatically searches the	terminal database in  this  order  for
       these  entries  and  then sets the "TERM" and the "TERMCAP" environment
       variables.  You may also	use "vt220",  but must set the terminal	emula-
       tion  level  with  the  decTerminalID resource.	On most	systems, xterm
       will use	the terminfo database.	Some older systems use termcap.	  (The
       "TERMCAP"  environment variable is not set if xterm is linked against a
       terminfo	library, since the requisite information is  not  provided  by
       the termcap emulation of	terminfo libraries).

       Many  of	 the special xterm features may	be modified under program con-
       trol through a set of escape  sequences	different  from	 the  standard
       VT102 escape sequences.	(See the Xterm Control Sequences document.)

       The  Tektronix  4014 emulation is also fairly good.  It supports	12-bit
       graphics	addressing, scaled to the window size.	 Four  different  font
       sizes and five different	lines types are	supported.  There is no	write-
       through or defocused mode support.  The	Tektronix  text	 and  graphics
       commands	 are recorded internally by xterm and may be written to	a file
       by sending the COPY escape sequence (or through the Tektronix menu; see
       below).	 The name of the file will be "COPYyyyy-MM-dd.hh:mm:ss", where
       yyyy, MM, dd, hh, mm and	ss are the year, month,	day, hour, minute  and
       second  when  the COPY was performed (the file is created in the	direc-
       tory xterm is started in, or the	home directory for a login xterm).

       Not all of the features described in this manual	are necessarily	avail-
       able  in	 this version of xterm.	 Some (e.g., the non-VT220 extensions)
       are available only if they were compiled	in, though the most  commonly-
       used are	in the default configuration.

OTHER FEATURES
       Xterm  automatically highlights the text	cursor when the	pointer	enters
       the window (selected) and unhighlights it when the pointer  leaves  the
       window  (unselected).  If the window is the focus window, then the text
       cursor is highlighted no	matter where the pointer is.

       In VT102	mode, there are	escape sequences to activate and deactivate an
       alternate  screen buffer, which is the same size	as the display area of
       the window.  When activated, the	current	screen is saved	 and  replaced
       with the	alternate screen.  Saving of lines scrolled off	the top	of the
       window is disabled until	the normal screen is restored.	The usual ter-
       minal description for xterm allows the visual editor vi(1) to switch to
       the alternate screen for	editing	and to restore the screen on exit.   A
       popup  menu  entry makes	it simple to switch between the	normal and al-
       ternate screens for cut and paste.

       In either VT102 or Tektronix mode, there	are escape sequences to	change
       the name	of the windows.	 Additionally, in VT102	mode, xterm implements
       the window-manipulation control sequences from dtterm, such as resizing
       the window, setting its location	on the screen.

       Xterm allows character-based applications to receive mouse events (cur-
       rently button-press and release events, and  button-motion  events)  as
       keyboard	control	sequences.  See	Xterm Control Sequences	for details.

OPTIONS
       The xterm terminal emulator accepts the standard	X Toolkit command line
       options as well as many application-specific options.   If  the	option
       begins  with  a `+' instead of a	`-', the option	is restored to its de-
       fault value.

       -version
	       This causes xterm to print a version  number  to	 the  standard
	       output, and then	exit.

       -help   This causes xterm to print out a	verbose	message	describing its
	       options,	one per	line.  The message is written to the  standard
	       output.	After printing the message, xterm exits.  Xterm	gener-
	       ates this message, sorting it and noting	whether	a "-option" or
	       a  "+option"  turns  the	feature	on or off, since some features
	       historically have been one or the  other.   Xterm  generates  a
	       concise	help  message  (multiple options per line) when	an un-
	       known option is used, e.g.,

		   xterm -z

	       If the logic for	a particular option such  as  logging  is  not
	       compiled	 into xterm, the help text for that option also	is not
	       displayed by the	-help option.

       Most of the xterm options are actually parsed by	the X  Toolkit,	 which
       sets resource values.  Xterm provides the X Toolkit with	a table	of op-
       tions.  A few of	these are marked, telling the X	Toolkit	to ignore them
       (-help,	-version,  -class,  -e,	 and  -into).  After the X Toolkit has
       parsed the command-line parameters, it removes those which it  handles,
       leaving the specially-marked parameters for xterm to handle.

       The  -version  and  -help  options are interpreted even if xterm	cannot
       open the	display, and are useful	for testing and	configuration scripts.
       Along  with -class, they	are checked before other options.  To do this,
       xterm has its own (much simpler)	argument parser, along with a table of
       the X Toolkit's built-in	list of	options.

       Relying	upon  the X Toolkit to parse the options and associated	values
       has the advantages of simplicity	and good integration with  the	X  re-
       source mechanism.  There	are a few drawbacks

       o   Xterm cannot	tell easily whether a resource value was set by	one of
	   the external	resource- or application-defaults files, or if it  was
	   set	through	the -xrm option	or via some directly relevant command-
	   line	option.	 Xterm sees only the end-result: a value supplied when
	   creating its	widgets.

       o   Xterm does not know the order in which particular options and items
	   in resource files are evaluated.  Rather, it	sees all of the	values
	   for	a  given  widget at the	same time.  In the design of these op-
	   tions, some are deemed more important, and can override  other  op-
	   tions.

	   The	X Toolkit uses patterns	(constants and wildcards) to match re-
	   sources.  Once a particular pattern has been	used, it will not mod-
	   ify	it.  To	override a given setting, a more-specific pattern must
	   be used, e.g., replacing "*"	with ".".   Some  poorly-designed  re-
	   source  files are too specific to allow the command-line options to
	   affect the relevant widget values.

       o   In a	few cases, the X Toolkit combines its standard options in ways
	   which  do  not  work	 well with xterm.  This	happens	with the color
	   (-fg, -B) and reverse (-rv) options.	 Xterm makes a special case of
	   these and adjusts its sense of "reverse" to lessen user surprise.

       One parameter (after all	options) may be	given.	That overrides xterm's
       built-in	choice of shell	program:

       o   If the parameter is not a relative path, i.e., beginning with  "./"
	   or  "../",  xterm looks for the file	in the user's PATH.  In	either
	   case, this check fails if xterm cannot construct an absolute	path.

       o   If that check fails (or if no such parameter	is given), xterm  next
	   checks the "SHELL" variable.	 If that specifies an executable file,
	   xterm will attempt to  start	 that.	 However,  xterm  additionally
	   checks if it	is a valid shell, and will unset "SHELL" if it is not.

       o   If "SHELL" is not set to an executable file,	xterm tries to use the
	   shell program specified in the user's password file entry.  As  be-
	   fore, xterm verifies	if this	is a valid shell.

       o   Finally, if the password file entry does not	specify	a valid	shell,
	   xterm uses /bin/sh.

       The -e option cannot be used with this parameter	since it uses all  pa-
       rameters	following the option.

       Xterm  validates	 shell	programs by finding their pathname in the text
       file /etc/shells.  It treats the	environment variable "SHELL" specially
       because	(like  "TERM"),	xterm both reads and updates the variable, and
       because the program started by xterm is not necessarily a shell.

       The other options are used to control the appearance and	behavior.  Not
       all options are necessarily configured into your	copy of	xterm:

       -132    Normally,  the  VT102 DECCOLM escape sequence that switches be-
	       tween 80	and 132	column mode is ignored.	  This	option	causes
	       the  DECCOLM  escape  sequence  to be recognized, and the xterm
	       window will resize appropriately.

       -ah     This option indicates that xterm	should	always	highlight  the
	       text cursor.  By	default, xterm will display a hollow text cur-
	       sor whenever the	focus is lost or the pointer leaves  the  win-
	       dow.

       +ah     This  option  indicates	that xterm should do text cursor high-
	       lighting	based on focus.

       -ai     This option disables active icon	support	if  that  feature  was
	       compiled	 into  xterm.  This is equivalent to setting the vt100
	       resource	activeIcon to "false".

       +ai     This option enables active icon support	if  that  feature  was
	       compiled	 into  xterm.  This is equivalent to setting the vt100
	       resource	activeIcon to "true".

       -aw     This option indicates that auto-wraparound should  be  allowed.
	       This  allows  the cursor	to automatically wrap to the beginning
	       of the next line	when it	is at the rightmost position of	a line
	       and text	is output.

       +aw     This  option  indicates	that auto-wraparound should not	be al-
	       lowed.

       -b number
	       This option specifies the size of the inner  border  (the  dis-
	       tance  between  the outer edge of the characters	and the	window
	       border) in pixels.  That	is the vt100 internalBorder  resource.
	       The default is "2".

       +bc     turn  off text cursor blinking.	This overrides the cursorBlink
	       resource.

       -bc     turn on text cursor blinking.  This overrides  the  cursorBlink
	       resource.

       -bcf milliseconds
	       set the amount of time text cursor is off when blinking via the
	       cursorOffTime resource.

       -bcn milliseconds
	       set the amount of time text cursor is on	when blinking via  the
	       cursorOffTime resource.

       -bdc    Set  the	 vt100	resource colorBDMode to	"false", disabling the
	       display of characters with bold attribute as color

       +bdc    Set the vt100 resource colorBDMode to "true", enabling the dis-
	       play  of	 characters  with  bold	attribute as color rather than
	       bold

       -cb     Set the vt100 resource cutToBeginningOfLine to "false".

       +cb     Set the vt100 resource cutToBeginningOfLine to "true".

       -cc characterclassrange:value[,...]
	       This sets classes indicated by the given	ranges	for  using  in
	       selecting  by  words.   See  the	 section  specifying character
	       classes.	 and discussion	of the charClass resource.

       -cjk_width
	       Set the cjkWidth	resource to "true".  When turned  on,  charac-
	       ters  with  East	 Asian Ambiguous (A) category in UTR 11	have a
	       column width of 2.  Otherwise, they have	a column width	of  1.
	       This may	be useful for some legacy CJK text terminal-based pro-
	       grams assuming box drawings and others to have a	 column	 width
	       of  2.  It also should be turned	on when	you specify a TrueType
	       CJK double-width	(bi-width/monospace) font either with  -fa  at
	       the command line	or faceName resource.  The default is "false"

       +cjk_width
	       Reset the cjkWidth resource.

       -class string
	       This  option  allows  you  to  override xterm's resource	class.
	       Normally	it is "XTerm", but can be set to another class such as
	       "UXTerm"	to override selected resources.

       -cm     This  option  disables  recognition of ANSI color-change	escape
	       sequences.  It sets the colorMode resource to "false".

       +cm     This option enables recognition of ANSI color-change escape se-
	       quences.	 This is the same as the vt100 resource	colorMode.

       -cn     This  option indicates that newlines should not be cut in line-
	       mode selections.	 It sets the cutNewline	resource to "false".

       +cn     This option indicates that newlines should be cut in  line-mode
	       selections.  It sets the	cutNewline resource to "true".

       -cr color
	       This  option  specifies	the color to use for text cursor.  The
	       default is to use the same foreground color that	 is  used  for
	       text.  It sets the cursorColor resource according to the	param-
	       eter.

       -cu     This option indicates that xterm	should work around  a  bug  in
	       the more(1) program that	causes it to incorrectly display lines
	       that are	exactly	the width of the window	and are	followed by  a
	       line beginning with a tab (the leading tabs are not displayed).
	       This option is so named because it was originally thought to be
	       a bug in	the curses(3x) cursor motion package.

       +cu     This  option  indicates	that  xterm should not work around the
	       more(1) bug mentioned above.

       -dc     This option disables the	escape sequence	to change dynamic col-
	       ors:  the vt100 foreground and background colors, its text cur-
	       sor color, the pointer cursor foreground	and background colors,
	       the  Tektronix  emulator	 foreground and	background colors, its
	       text cursor color and highlight color.  The option sets the dy-
	       namicColors option to "false".

       +dc     This  option enables the	escape sequence	to change dynamic col-
	       ors.  The option	sets the dynamicColors option to "true".

       -e program [ arguments ... ]
	       This option specifies the program (and its command  line	 argu-
	       ments)  to be run in the	xterm window.  It also sets the	window
	       title and icon name to be the basename of the program being ex-
	       ecuted  if  neither  -T	nor  -n	are given on the command line.
	       This must be the	last option on the command line.

       -en encoding
	       This option determines the encoding on which  xterm  runs.   It
	       sets  the locale	resource.  Encodings other than	UTF-8 are sup-
	       ported by using luit.  The -lc option should be used instead of
	       -en for systems with locale support.

       -fb font
	       This  option  specifies	a font to be used when displaying bold
	       text.  It sets the boldFont resource.

	       This font must be the same height and width as the normal font,
	       otherwise  it  is  ignored.   If	only one of the	normal or bold
	       fonts is	specified, it will be used as the normal font and  the
	       bold font will be produced by overstriking this font.

	       See  also  the  discussion  of  boldMode	and alwaysBoldMode re-
	       sources.

       -fa pattern
	       This option sets	 the  pattern  for  fonts  selected  from  the
	       FreeType	 library if support for	that library was compiled into
	       xterm.  This corresponds	to the faceName	resource.  When	a  CJK
	       double-width  font  is  specified, you also need	to turn	on the
	       cjkWidth	resource.

	       See also	the renderFont resource, which combines	with  this  to
	       determine whether FreeType fonts	are initially active.

       -fbb    This option indicates that xterm	should compare normal and bold
	       fonts bounding boxes to ensure they are	compatible.   It  sets
	       the freeBoldBox resource	to "false".

       +fbb    This  option indicates that xterm should	not compare normal and
	       bold fonts bounding boxes to ensure they	 are  compatible.   It
	       sets the	freeBoldBox resource to	"true".

       -fbx    This  option  indicates	that  xterm should not assume that the
	       normal and bold fonts have VT100	line-drawing  characters.   If
	       any  are	 missing, xterm	will draw the characters directly.  It
	       sets the	forceBoxChars resource to "false".

       +fbx    This option indicates that xterm	should assume that the	normal
	       and bold	fonts have VT100 line-drawing characters.  It sets the
	       forceBoxChars resource to "true".

       -fd pattern
	       This option sets	the pattern for	 double-width  fonts  selected
	       from  the FreeType library if support for that library was com-
	       piled into xterm.  This corresponds to  the  faceNameDoublesize
	       resource.

       -fi font
	       This  option sets the font for active icons if that feature was
	       compiled	into xterm.

	       See also	the discussion of the iconFont resource.

       -fs size
	       This option sets	the pointsize  for  fonts  selected  from  the
	       FreeType	 library if support for	that library was compiled into
	       xterm.  This corresponds	to the faceSize	resource.

       -fullscreen
	       This option indicates that xterm	should ask the window  manager
	       to let it use the full-screen for display, e.g.,	without	window
	       decorations.  It	sets the fullscreen resource to	"true".

       +fullscreen
	       This option indicates that xterm	should not ask the window man-
	       ager  to	 let  it use the full-screen for display.  It sets the
	       fullscreen resource to "false".

       -fw font
	       This option specifies the font to be used for  displaying  wide
	       text.   By default, it will attempt to use a font twice as wide
	       as the font that	will be	used to	draw normal text.  If no  dou-
	       ble-width  font	is found, it will improvise, by	stretching the
	       normal font.  This corresponds to the wideFont resource.

       -fwb font
	       This option specifies the font to be used for  displaying  bold
	       wide  text.  By default,	it will	attempt	to use a font twice as
	       wide as the font	that will be used to draw bold	text.	If  no
	       double-width  font  is  found, it will improvise, by stretching
	       the bold	font.  This corresponds	to the wideBoldFont resource.

       -fx font
	       This option specifies the font to be used  for  displaying  the
	       preedit string in the "OverTheSpot" input method.

	       See also	the discussion of the ximFont resource.

       -hc color
	       (see -selbg).

       -hf     This  option indicates that HP Function Key escape codes	should
	       be generated for	function keys.	It sets	the hpFunctionKeys re-
	       source to "true".

       +hf     This  option indicates that HP Function Key escape codes	should
	       not be generated	for function keys.  It sets the	hpFunctionKeys
	       resource	to "false".

       -hm     Tells  xterm  to	 use  highlightTextColor and highlightColor to
	       override	the reversed foreground/background colors in a	selec-
	       tion.  It sets the highlightColorMode resource to "true".

       +hm     Tells xterm not to use highlightTextColor and highlightColor to
	       override	the reversed foreground/background colors in a	selec-
	       tion.  It sets the highlightColorMode resource to "false".

       -hold   Turn on the hold	resource, i.e.,	xterm will not immediately de-
	       stroy its window	when the shell	command	 completes.   It  will
	       wait  until you use the window manager to destroy/kill the win-
	       dow, or if you use the menu entries that	send a	signal,	 e.g.,
	       HUP or KILL.

       +hold   Turn  off  the  hold resource, i.e., xterm will immediately de-
	       stroy its window	when the shell command completes.

       -ie     Turn on the ptyInitialErase resource, i.e., use the pseudo-ter-
	       minal's sense of	the stty erase value.

       +ie     Turn off	the ptyInitialErase resource, i.e., set	the stty erase
	       value using the kb string from the termcap entry	 as  a	refer-
	       ence, if	available.

       -im     Turn  on	the useInsertMode resource, which forces use of	insert
	       mode by adding appropriate entries to the  TERMCAP  environment
	       variable.

       +im     Turn off	the useInsertMode resource.

       -into windowId
	       Given an	X window identifier (an	integer, which can be hexadec-
	       imal, octal or decimal according	 to  whether  it  begins  with
	       "0x",  "0" or neither), xterm will reparent its top-level shell
	       widget to that window.  This is	used  to  embed	 xterm	within
	       other applications.

	       For instance, there are scripts for Tcl/Tk and Gtk which	can be
	       used to demonstrate the feature.	 When using Gtk,  there	 is  a
	       limitation  of  that  toolkit  which  requires that xterm's al-
	       lowSendEvents resource is enabled.

       -j      This option indicates that xterm	should do jump scrolling.   It
	       corresponds  to	the  jumpScroll	 resource.   Normally, text is
	       scrolled	one line at a time; this option	allows xterm  to  move
	       multiple	 lines	at  a time so that it does not fall as far be-
	       hind.  Its use is strongly recommended  since  it  makes	 xterm
	       much  faster  when scanning through large amounts of text.  The
	       VT100 escape sequences for enabling and disabling smooth	scroll
	       as  well	as the "VT Options" menu can be	used to	turn this fea-
	       ture on or off.

       +j      This option indicates that xterm	should not do jump scrolling.

       -k8     This option  sets  the  allowC1Printable	 resource.   When  al-
	       lowC1Printable  is  set,	xterm overrides	the mapping of C1 con-
	       trol characters (code 128-159) to treat them as printable.

       +k8     This option resets the allowC1Printable resource.

       -kt keyboardtype
	       This option sets	the keyboardType  resource.   Possible	values
	       include:	 "unknown",  "default",	"hp", "sco", "sun", "tcap" and
	       "vt220".

	       The value "unknown", causes the corresponding  resource	to  be
	       ignored.

	       The  value  "default",  suppresses the associated resources hp-
	       FunctionKeys, scoFunctionKeys,  sunFunctionKeys,	 tcapFunction-
	       Keys and	sunKeyboard, using the Sun/PC keyboard layout.

       -l      Turn logging on.	 Normally logging is not supported, due	to se-
	       curity concerns.	 Some versions of xterm	may have  logging  en-
	       abled.	The  logfile  is  written  to the directory from which
	       xterm is	invoked.  The filename is generated, of	the form

		    XtermLog.XXXXXX

	       or

		    Xterm.log.hostname.yyyy.mm.dd.hh.mm.ss.XXXXXX

	       depending on how	xterm was built.

       +l      Turn logging off.

       -lc     Turn on support of various encodings according  to  the	users'
	       locale  setting,	 i.e.,	LC_ALL,	 LC_CTYPE, or LANG environment
	       variables.  This	is achieved by turning on UTF-8	 mode  and  by
	       invoking	 luit  for  conversion	between	 locale	 encodings and
	       UTF-8.  (luit is	not invoked in UTF-8  locales.)	  This	corre-
	       sponds to the locale resource.

	       The  actual list	of encodings which are supported is determined
	       by luit.	 Consult the luit manual page for further details.

	       See also	the discussion of the -u8 option which supports	 UTF-8
	       locales.

       +lc     Turn  off  support  of automatic	selection of locale encodings.
	       Conventional 8bit mode or, in UTF-8 locales or with -u8 option,
	       UTF-8 mode will be used.

       -lcc path
	       File  name  for the encoding converter from/to locale encodings
	       and UTF-8 which is used with -lc	 option	 or  locale  resource.
	       This corresponds	to the localeFilter resource.

       -leftbar
	       Force  scrollbar	to the left side of VT100 screen.  This	is the
	       default,	unless you have	set the	rightScrollBar resource.

       -lf filename
	       Specify the log-filename.  See the -l option.

       -ls     This option indicates that the shell that  is  started  in  the
	       xterm  window  will be a	login shell (i.e., the first character
	       of argv[0] will be a dash, indicating  to  the  shell  that  it
	       should read the user's .login or	.profile).

	       The  -ls	 flag and the loginShell resource are ignored if -e is
	       also given, because xterm does not know how to make  the	 shell
	       start the given command after whatever it does when it is a lo-
	       gin shell - the user's shell of choice need  not	 be  a	Bourne
	       shell  after all.  Also,	xterm -e is supposed to	provide	a con-
	       sistent functionality for other applications that need to start
	       text-mode  programs in a	window,	and if loginShell were not ig-
	       nored, the result of ~/.profile might interfere with that.

	       If you do want the effect of -ls	and -e simultaneously, you may
	       get away	with something like

		   xterm -e /bin/bash -l -c "my	command	here"

	       Finally,	 -ls  is  not completely ignored, because xterm	-ls -e
	       does write a /etc/wtmp entry (if	configured to do so),  whereas
	       xterm -e	does not.

       -maximized
	       This  option indicates that xterm should	ask the	window manager
	       to maximize its layout on startup.   This  corresponds  to  the
	       maximized resource.

	       Maximizing  is not the reverse of iconifying; it	is possible to
	       do both with certain window managers.

       +maximized
	       This option indicates that xterm	should ask the window  manager
	       to not maximize its layout on startup.

       +ls     This option indicates that the shell that is started should not
	       be a login shell	(i.e., it will be a normal "subshell").

       -mb     This option indicates that xterm	should ring a margin bell when
	       the user	types near the right end of a line.

       +mb     This option indicates that margin bell should not be rung.

       -mc milliseconds
	       This  option specifies the maximum time between multi-click se-
	       lections.

       -mesg   Turn off	the messages resource, i.e., disallow write access  to
	       the terminal.

       +mesg   Turn  on	the messages resource, i.e., allow write access	to the
	       terminal.

       -mk_width
	       Set the mkWidth resource	to "true".  This  makes	 xterm	use  a
	       built-in	 version of the	wide-character width calculation.  The
	       default is "false"

       +mk_width
	       Reset the mkWidth resource.

       -ms color
	       This option specifies the color to be used for the pointer cur-
	       sor.   The  default  is to use the foreground color.  This sets
	       the pointerColor	resource.

       -nb number
	       This option specifies the number	of characters from  the	 right
	       end  of a line at which the margin bell,	if enabled, will ring.
	       The default is "10".

       -nul    This option disables the	display	of underlining.

       +nul    This option enables the display of underlining.

       -pc     This option enables the PC-style	use of bold colors (see	 bold-
	       Colors resource).

       +pc     This option disables the	PC-style use of	bold colors.

       -pob    This option indicates that the window should be raised whenever
	       a Control-G is received.

       +pob    This option indicates that the  window  should  not  be	raised
	       whenever	a Control-G is received.

       -report-colors
	       Print a report to the standard output showing information about
	       colors as xterm allocates them.	This corresponds  to  the  re-
	       portColors resource.

       -report-fonts
	       Print a report to the standard output showing information about
	       fonts which are loaded.	This corresponds  to  the  reportFonts
	       resource.

       -rightbar
	       Force scrollbar to the right side of VT100 screen.

       -rvc    This option disables the	display	of characters with reverse at-
	       tribute as color.

       +rvc    This option enables the display of characters with reverse  at-
	       tribute as color.

       -rw     This  option  indicates	that  reverse-wraparound should	be al-
	       lowed.  This allows the cursor to back  up  from	 the  leftmost
	       column  of  one	line  to  the rightmost	column of the previous
	       line.  This is very useful for editing long shell command lines
	       and  is	encouraged.  This option can be	turned on and off from
	       the "VT Options"	menu.

       +rw     This option indicates that reverse-wraparound should not	be al-
	       lowed.

       -s      This  option  indicates	that  xterm may	scroll asynchronously,
	       meaning that the	screen does not	have to	be kept	completely  up
	       to  date	while scrolling.  This allows xterm to run faster when
	       network latencies are very high and is  typically  useful  when
	       running across a	very large internet or many gateways.

       +s      This option indicates that xterm	should scroll synchronously.

       -samename
	       Does  not send title and	icon name change requests when the re-
	       quest would have	no effect: the name is not changed.  This  has
	       the advantage of	preventing flicker and the disadvantage	of re-
	       quiring an extra	round trip to the server to find out the  pre-
	       vious value.  In	practice this should never be a	problem.

       +samename
	       Always send title and icon name change requests.

       -sb     This  option  indicates	that  some  number  of	lines that are
	       scrolled	off the	top of the window should be saved and  that  a
	       scrollbar  should  be  displayed	 so  that  those  lines	can be
	       viewed.	This option may	be turned on and off from the "VT  Op-
	       tions" menu.

       +sb     This option indicates that a scrollbar should not be displayed.

       -selbg color
	       This  option  specifies	the color to use for the background of
	       selected	text.  If not specified, reverse video is  used.   See
	       the discussion of the highlightColor resource.

       -selfg color
	       This  option  specifies the color to use	for selected text.  If
	       not specified, reverse video is used.  See  the	discussion  of
	       the highlightTextColor resource.

       -sf     This option indicates that Sun Function Key escape codes	should
	       be generated for	function keys.

       +sf     This option indicates that the standard escape codes should  be
	       generated for function keys.

       -sh number
	       scale  line-height values by the	given number.  See the discus-
	       sion of the scaleHeight resource.

       -si     This option indicates that output to a window should not	 auto-
	       matically  reposition the screen	to the bottom of the scrolling
	       region.	This option can	be turned on and off from the "VT  Op-
	       tions" menu.

       +si     This  option  indicates that output to a	window should cause it
	       to scroll to the	bottom.

       -sk     This option indicates that  pressing  a	key  while  using  the
	       scrollbar  to  review  previous	lines of text should cause the
	       window to be repositioned automatically in the normal  position
	       at the bottom of	the scroll region.

       +sk     This  option  indicates	that  pressing	a  key while using the
	       scrollbar should	not cause the window to	be repositioned.

       -sl number
	       This option specifies the number	of lines  to  save  that  have
	       been  scrolled  off the top of the screen.  This	corresponds to
	       the saveLines resource.	The default is "64".

       -sm     This option, corresponding to the  sessionMgt  resource,	 indi-
	       cates that xterm	should set up session manager callbacks.

       +sm     This option indicates that xterm	should not set up session man-
	       ager callbacks.

       -sp     This option indicates that Sun/PC keyboard should  be  assumed,
	       providing  mapping  for	keypad "+' to ",', and CTRL-F1 to F13,
	       CTRL-F2 to F14, etc.

       +sp     This option indicates that the standard escape codes should  be
	       generated for keypad and	function keys.

       -t      This  option  indicates	that  xterm  should start in Tektronix
	       mode, rather than in VT102 mode.	  Switching  between  the  two
	       windows is done using the "Options" menus.

	       Terminal	 database  (terminfo  (5) or termcap (5)) entries that
	       work with xterm are:

	       "tek4014",
	       "tek4015",
	       "tek4012",
	       "tek4013",
	       "tek4010", and
	       "dumb".

	       xterm automatically searches the	terminal database in this  or-
	       der  for	 these entries and then	sets the "TERM"	and the	"TERM-
	       CAP" environment	variables.

       +t      This option indicates that xterm	should start in	VT102 mode.

       -tb     This option, corresponding to the toolBar  resource,  indicates
	       that  xterm should display a toolbar (or	menubar) at the	top of
	       its window.  The	buttons	in the toolbar correspond to the popup
	       menus, e.g., control/left/mouse for "Main Options".

       +tb     This option indicates that xterm	should not set up a toolbar.

       -ti term_id
	       Specify	the  name used by xterm	to select the correct response
	       to terminal ID queries.	It also	specifies the emulation	level,
	       used  to	 determine  the	 type  of response to a	DA control se-
	       quence.	Valid values include vt52, vt100, vt101, vt102,	vt220,
	       and vt240 (the "vt" is optional).  The default is "vt420".  The
	       term_id argument	specifies the terminal ID to  use.   (This  is
	       the same	as the decTerminalID resource).

       -tm string
	       This  option  specifies	a  series of terminal setting keywords
	       followed	by the characters that should be bound to those	 func-
	       tions,  similar	to  the	 stty program.	The keywords and their
	       values are described in detail in the ttyModes resource.

       -tn name
	       This option specifies the name of the terminal type to  be  set
	       in  the	TERM  environment  variable.   It  corresponds	to the
	       termName	resource.  This	terminal type must exist in the	termi-
	       nal  database  (termcap	or terminfo, depending on how xterm is
	       built) and should have li# and co# entries.   If	 the  terminal
	       type  is	 not  found,  xterm  uses  the	built-in list "xterm",
	       "vt102",	etc.

       -u8     This option sets	the utf8 resource.  When utf8  is  set,	 xterm
	       interprets incoming data	as UTF-8.  This	sets the wideChars re-
	       source as a side-effect,	but the	UTF-8 mode set by this	option
	       prevents	 it from being turned off.  If you must	turn UTF-8 en-
	       coding on and off, use the  -wc	option	or  the	 corresponding
	       wideChars resource, rather than the -u8 option.

	       This option and the utf8	resource are overridden	by the -lc and
	       -en options and locale resource.	 That is, if  xterm  has  been
	       compiled	 to  support  luit,  and  the  locale  resource	is not
	       "false" this option is ignored.	We recommend using the -lc op-
	       tion  or	the "locale: true" resource in UTF-8 locales when your
	       operating system	supports locale, or -en	UTF-8  option  or  the
	       "locale:	UTF-8"	resource  when	your operating system does not
	       support locale.

       +u8     This option resets the utf8 resource.

       -uc     This option makes the cursor underlined instead of a box.

       +uc     This option makes the cursor a box instead of underlined.

       -ulc    This option disables the	display	of characters  with  underline
	       attribute as color rather than with underlining.

       +ulc    This  option  enables  the display of characters	with underline
	       attribute as color rather than with underlining.

       -ulit   This option, corresponding to the italicULMode  resource,  dis-
	       ables  the  display  of	characters with	underline attribute as
	       italics rather than with	underlining.

       +ulit   This option, corresponding to the  italicULMode	resource,  en-
	       ables  the  display  of	characters with	underline attribute as
	       italics rather than with	underlining.

       -ut     This option indicates that xterm	should not write a record into
	       the the system utmp log file.

       +ut     This option indicates that xterm	should write a record into the
	       system utmp log file.

       -vb     This option indicates that a visual bell	is preferred  over  an
	       audible	one.   Instead of ringing the terminal bell whenever a
	       Control-G is received, the window will be flashed.

       +vb     This option indicates that a visual bell	should not be used.

       -wc     This option sets	the wideChars resource.

	       When wideChars is set, xterm maintains internal structures  for
	       16-bit  characters.   If	xterm is not started in	UTF-8 mode (or
	       if this resource	is not	set),  initially  it  maintains	 those
	       structures  to  support	8-bit  characters.  Xterm can later be
	       switched, using a menu entry or control sequence, causing it to
	       reallocate those	structures to support 16-bit characters.

	       The default is "false".

       +wc     This option resets the wideChars	resource.

       -wf     This  option indicates that xterm should	wait for the window to
	       be mapped the first time	before starting	the subprocess so that
	       the  initial  terminal  size settings and environment variables
	       are correct.  It	is the application's responsibility  to	 catch
	       subsequent terminal size	changes.

       +wf     This  option indicates that xterm should	not wait before	start-
	       ing the subprocess.

       -ziconbeep percent
	       Same as zIconBeep resource.  If	percent	 is  non-zero,	xterms
	       that  produce  output while iconified will cause	an XBell sound
	       at the given volume and have "***" prepended to their icon  ti-
	       tles.   Most  window  managers  will detect this	change immedi-
	       ately, showing you which	window has  the	 output.   (A  similar
	       feature was in x10 xterm.)

       -C      This  option  indicates that this window	should receive console
	       output.	This is	not supported on all systems.  To obtain  con-
	       sole  output,  you must be the owner of the console device, and
	       you must	have read and write permission for  it.	  If  you  are
	       running	X under	xdm on the console screen you may need to have
	       the session startup and reset programs  explicitly  change  the
	       ownership  of the console device	in order to get	this option to
	       work.

       -Sccn   This option allows xterm	to be used  as	an  input  and	output
	       channel	for  an	existing program and is	sometimes used in spe-
	       cialized	applications.  The option value	specifies the last few
	       letters	of the name of a pseudo-terminal to use	in slave mode,
	       plus the	number of the inherited	file descriptor.  If  the  op-
	       tion  contains  a  "/"  character, that delimits	the characters
	       used for	the pseudo-terminal name  from	the  file  descriptor.
	       Otherwise,  exactly two characters are used from	the option for
	       the pseudo-terminal name, the remainder is the file descriptor.
	       Examples	 (the  first  two  are equivalent since	the descriptor
	       follows the last	"/"):

		   -S/dev/pts/123/45
		   -S123/45
		   -Sab34

	       Note that xterm does not	close any file descriptor which	it did
	       not  open for its own use.  It is possible (though probably not
	       portable) to have an application	which passes an	open file  de-
	       scriptor	down to	xterm past the initialization or the -S	option
	       to a process running in the xterm.

   OLD OPTIONS
       The following command line arguments  are  provided  for	 compatibility
       with  older versions.  They may not be supported	in the next release as
       the X Toolkit provides standard options that accomplish the same	task.

       %geom   This option specifies the preferred size	and  position  of  the
	       Tektronix  window.  It is shorthand for specifying the "*tekGe-
	       ometry" resource.

       #geom   This option specifies the preferred position of the  icon  win-
	       dow.   It  is  shorthand	for specifying the "*iconGeometry" re-
	       source.

       -T string
	       This option specifies the title for  xterm's  windows.	It  is
	       equivalent to -title.

       -n string
	       This option specifies the icon name for xterm's windows.	 It is
	       shorthand for specifying	the "*iconName"	resource.   Note  that
	       this  is	 not the same as the toolkit option -name (see below).
	       The default icon	name is	the application	name.

	       If no suitable icon is  found,  xterm  provides	a  compiled-in
	       pixmap.

       -r      This option indicates that reverse video	should be simulated by
	       swapping	the foreground and background colors.  It  is  equiva-
	       lent to -rv.

       -w number
	       This  option  specifies	the width in pixels of the border sur-
	       rounding	the window.  It	is equivalent to -borderwidth or -bw.

   X TOOLKIT OPTIONS
       The following standard X	Toolkit	command	line  arguments	 are  commonly
       used with xterm:

       -bd color
	       This  option  specifies	the color to use for the border	of the
	       window.	The corresponding resource name	is borderColor.	 xterm
	       uses the	X Toolkit default, which is "XtDefaultForeground".

       -bg color
	       This  option  specifies	the color to use for the background of
	       the window.  The	corresponding  resource	 name  is  background.
	       The default is "XtDefaultBackground".

       -bw number
	       This  option  specifies	the width in pixels of the border sur-
	       rounding	the window.

	       This appears to be a legacy of older X releases.	 It  sets  the
	       borderWidth  resource  of the shell widget, and may provide ad-
	       vice to your window manager to set the thickness	of the	window
	       frame.	Most window managers do	not use	this information.  See
	       the -b option, which controls the inner	border	of  the	 xterm
	       window.

       -display	display
	       This option specifies the X server to contact; see X(1).

       -fg color
	       This  option  specifies	the  color to use for displaying text.
	       The corresponding resource name is foreground.  The default  is
	       "XtDefaultForeground".

       -fn font
	       This option specifies the font to be used for displaying	normal
	       text.  The corresponding	resource name is font.	 The  resource
	       value default is	fixed.

       -font font
	       This is the same	as -fn.

       -geometry geometry
	       This  option  specifies	the preferred size and position	of the
	       VT102 window; see X(1).

       -iconic This option indicates that xterm	should ask the window  manager
	       to  start  it as	an icon	rather than as the normal window.  The
	       corresponding resource name is iconic.

       -name name
	       This option specifies the  application  name  under  which  re-
	       sources	are to be obtained, rather than	the default executable
	       file name.  Name	should not contain "." or "*" characters.

       -rv     This option indicates that reverse video	should be simulated by
	       swapping	the foreground and background colors.  The correspond-
	       ing resource name is reverseVideo.

       +rv     Disable the simulation of reverse video by swapping  foreground
	       and background colors.

       -title string
	       This  option  specifies	the  window title string, which	may be
	       displayed by window managers if the user	so chooses.   The  de-
	       fault  title is the command line	specified after	the -e option,
	       if any, otherwise the application name.

       -xrm resourcestring
	       This option specifies a resource	string to be  used.   This  is
	       especially  useful for setting resources	that do	not have sepa-
	       rate command line options.

RESOURCES
       The program understands all of the core X Toolkit  resource  names  and
       classes.	 Application specific resources	(e.g., "XTerm.NAME") follow:

       backarrowKeyIsErase (class BackarrowKeyIsErase)
	       Tie  the	 VTxxx	backarrowKey and ptyInitialErase resources to-
	       gether by setting the DECBKM state  according  to  whether  the
	       initial	value of stty erase is a backspace (8) or delete (127)
	       character.  A "false" value disables this feature.  The default
	       is "False".

       fullscreen (class Fullscreen)
	       Specifies whether or not	xterm should ask the window manager to
	       use a fullscreen	layout on startup.   Xterm  accepts  either  a
	       keyword (ignoring case) or the number shown in parentheses:

	       false (0)
		  Fullscreen  layout  is  not used initially, but may be later
		  via menu-selection or	control	sequence.

	       true (1)
		  Fullscreen layout is used initially,	but  may  be  disabled
		  later	via menu-selection or control sequence.

	       always (2)
		  Fullscreen  layout is	used initially,	and cannot be disabled
		  later	via menu-selection or control sequence.

	       never (3)
		  Fullscreen layout is not used, and cannot be	enabled	 later
		  via menu-selection or	control	sequence.

	       The default is "false".

       hold (class Hold)
	       If true,	xterm will not immediately destroy its window when the
	       shell command completes.	 It will wait until you	use the	window
	       manager	to destroy/kill	the window, or if you use the menu en-
	       tries that send a signal, e.g., HUP or KILL.   You  may	scroll
	       back,  select text, etc., to perform most graphical operations.
	       Resizing	the display will lose data, however,  since  this  in-
	       volves interaction with the shell which is no longer running.

       hpFunctionKeys (class HpFunctionKeys)
	       Specifies whether or not	HP Function Key	escape codes should be
	       generated for function keys  instead  of	 standard  escape  se-
	       quences.

	       See also	the keyboardType resource.

       iconGeometry (class IconGeometry)
	       Specifies  the  preferred  size and position of the application
	       when iconified.	It is not necessarily  obeyed  by  all	window
	       managers.

       iconHint	(class IconHint)
	       Specifies  a  icon  which  will	be added to the	window manager
	       hints.  xterm provides no default value.

	       Set this	resource to "none" to omit the	hint  entirely,	 using
	       whatever	the window manager may decide.

	       If the iconHint resource	is given (or is	set via	the -n option)
	       xterm searches for a pixmap file	with that name,	in the current
	       directory  as  well as in /usr/local/share/pixmaps.  if the re-
	       source does not specify an absolute pathname.   In  each	 case,
	       xterm  adds "_48x48" and/or ".xpm" to the filename after	trying
	       without those suffixes.	If it is able to load the file,	 xterm
	       sets  the  window  manager  hint	 for  the  icon-pixmap.	 These
	       pixmaps are distributed with xterm, and can optionally be  com-
	       piled-in:

	       o   mini.xterm_16x16, mini.xterm_32x32, mini.xterm_48x48

	       o   filled-xterm_16x16 filled-xterm_32x32 filled-xterm_48x48

	       o   xterm_16x16 xterm_32x32 xterm_48x48

	       o   xterm-color_16x16 xterm-color_32x32 xterm-color_48x48

	       In  either  case, xterm allows for adding a "_48x48" to specify
	       the largest of the pixmaps as a default.	 That is, "mini.xterm"
	       is the same as "mini.xterm_48x48".

	       If  no  explicit	 iconHint resource is given (or	if none	of the
	       compiled-in names matches), xterm uses "mini.xterm"  (which  is
	       always compiled-in).

	       The iconHint resource has no effect on "desktop"	files, includ-
	       ing "panel" and "menu".	Those are typically set	via a  ".desk-
	       top"  file;  xterm  provides samples for	itself (and the	uxterm
	       script).	 The more capable desktop systems allow	 changing  the
	       icon on a per-user basis.

       iconName	(class IconName)
	       Specifies  a label for xterm when iconified.  xterm provides no
	       default value; some window managers may assume the  application
	       name, e.g., "xterm".

	       Setting	the iconName resource sets the icon label unless over-
	       ridden by zIconBeep or the control sequences which  change  the
	       window and icon labels.

       keyboardType (class KeyboardType)
	       Enables	one  (or none) of the various keyboard-type resources:
	       hpFunctionKeys, scoFunctionKeys,	sunFunctionKeys, tcapFunction-
	       Keys  and  sunKeyboard.	 The resource's	value should be	one of
	       the  corresponding  strings  "hp",  "sco",  "sun",  "tcap"   or
	       "vt220".	 The individual	resources are provided for legacy sup-
	       port; this resource is simpler to use.

	       The default is "unknown", i.e.,	none  of  the  associated  re-
	       sources are set via this	resource.

       maxBufSize (class MaxBufSize)
	       Specify	the  maximum size of the input buffer.	The default is
	       "32768".	 You cannot set	this to	a value	less than the  minBuf-
	       Size  resource.	 It  will  be increased	as needed to make that
	       value evenly divide this	one.

	       On some systems you may want to increase	one  or	 both  of  the
	       maxBufSize  and	minBufSize  resource  values to	achieve	better
	       performance if  the  operating  system  prefers	larger	buffer
	       sizes.

       maximized (class	Maximized)
	       Specifies whether or not	xterm should ask the window manager to
	       maximize	its layout on startup.	The default is "false".

       messages	(class Messages)
	       Specifies whether write access to the terminal is allowed  ini-
	       tially.	See mesg(1).  The default is "true".

       menuLocale (class MenuLocale)
	       Specify	the  locale  used  for character-set computations when
	       loading the popup menus.	 Use this  to  improve	initialization
	       performance  of the Athena popup	menus, which may load unneces-
	       sary (and very large) fonts, e.g., in a locale having UTF-8 en-
	       coding.	The default is "C" (POSIX).

	       To  use	the  current locale (only useful if you	have localized
	       the resource settings for the menu entries), set	 the  resource
	       to an empty string.

       minBufSize (class MinBufSize)
	       Specify	the minimum size of the	input buffer, i.e., the	amount
	       of data that xterm requests  on	each  read.   The  default  is
	       "4096".	You cannot set this to a value less than 64.

       omitTranslation (class OmitTranslation)
	       Selectively  omit one or	more parts of xterm's default transla-
	       tions at	startup.  The resource value is	a comma-separated list
	       of  keywords,  which may	be abbreviated:	"fullscreen", "scroll-
	       lock", "shift-fonts" or "wheel-mouse".  Xterm  also  recognizes
	       "default", but omitting that will make the program unusable un-
	       less you	provide	a similar definition  in  your	resource  set-
	       tings.

       ptyHandshake (class PtyHandshake)
	       If "true", xterm	will perform handshaking during	initialization
	       to ensure that the parent and child processes update  the  utmp
	       and stty	state.

	       See  also  waitForMap which waits for the pseudo-terminal's no-
	       tion of the screen  size,  and  ptySttySize  which  resets  the
	       screen  size  after  other terminal initialization is complete.
	       The default is "true".

       ptyInitialErase (class PtyInitialErase)
	       If "true", xterm	will use the pseudo-terminal's	sense  of  the
	       stty  erase  value.   If	"false", xterm will set	the stty erase
	       value to	match its own configuration, using the kb string  from
	       the  termcap  entry  as	a  reference, if available.  In	either
	       case, the result	is applied to the TERMCAP variable which xterm
	       sets.

	       See also	the ttyModes resource, which may modify	this.  The de-
	       fault is	"false".

       ptySttySize (class PtySttySize)
	       If "true", xterm	will reset the screen size after terminal ini-
	       tialization is complete.	 This is needed	for some systems whose
	       pseudo-terminals	 cannot	 propagate  terminal  characteristics.
	       Where it	is not needed, it can interfere	with other methods for
	       setting the intial screen size, e.g., via window	manager	inter-
	       action.

	       See  also waitForMap which waits	for a handshake-message	giving
	       the pseudo-terminal's notion of the screen size.	  The  default
	       is "false" on Linux and OS X systems, "true" otherwise.

       reportFonts (class ReportFonts)
	       If  true,  xterm	will print to the standard output a summary of
	       each font's metrics (size, number of glyphs, etc.), as it loads
	       them.  The default is "false".

       sameName	(class SameName)
	       If  the	value  of this resource	is "true", xterm does not send
	       title and icon name change requests when	the request would have
	       no  effect: the name is not changed.  This has the advantage of
	       preventing flicker and the disadvantage of requiring  an	 extra
	       round  trip  to	the server to find out the previous value.  In
	       practice	this should  never  be	a  problem.   The  default  is
	       "true".

       scaleHeight (class ScaleHeight)
	       Scale  line-height  values by the resource value, which is lim-
	       ited to "0.9" to	"1.5".	The default value is "1.0",

	       While this resource applies to either bitmap or TrueType	fonts,
	       its main	purpose	is to help work	around incompatible changes in
	       the Xft library's font metrics.	Xterm checks the font  metrics
	       to find what the	library	claims are the bounding	boxes for each
	       glyph (character).  However, some of Xft's  features  (such  as
	       the  autohinter)	 can cause the glyphs to be scaled larger than
	       the bounding boxes, and be partly overwritten by	the next row.

	       See useClipping for a related resource.

       scoFunctionKeys (class ScoFunctionKeys)
	       Specifies whether or not	SCO Function Key escape	 codes	should
	       be  generated  for function keys	instead	of standard escape se-
	       quences.

	       See also	the keyboardType resource.

       sessionMgt (class SessionMgt)
	       If the value of this resource is	"true",	xterm sets up  session
	       manager	callbacks for XtNdieCallback and XtNsaveCallback.  The
	       default is "true".

       sunFunctionKeys (class SunFunctionKeys)
	       Specifies whether or not	Sun Function Key escape	 codes	should
	       be  generated  for function keys	instead	of standard escape se-
	       quences.

	       See also	the keyboardType resource.

       sunKeyboard (class SunKeyboard)
	       Specifies whether or not	Sun/PC keyboard	layout should  be  as-
	       sumed  rather than DEC VT220.  This causes the keypad "+' to be
	       mapped to ",'.  and CTRL	F1-F12 to F11-F20,  depending  on  the
	       setting	of  the	 ctrlFKeys  resource.  so xterm	emulates a DEC
	       VT220 more accurately.  Otherwise (the  default,	 with  sunKey-
	       board  set  to  "false"),  xterm	uses PC-style bindings for the
	       function	keys and keypad.

	       PC-style	bindings use the Shift,	Alt, Control and Meta keys  as
	       modifiers  for function-keys and	keypad (see the	document Xterm
	       Control Sequences for  details).	  The  PC-style	 bindings  are
	       analogous  to  PCTerm,  but not the same	thing.	Normally these
	       bindings	do not conflict	with the use of	the Meta  key  as  de-
	       scribed	for the	eightBitInput resource.	 If they do, note that
	       the PC-style bindings are evaluated first.

	       See also	the keyboardType resource.

       tcapFunctionKeys	(class TcapFunctionKeys)
	       Specifies whether or not	function key escape  codes  read  from
	       the  termcap/terminfo  entry  should  be	generated for function
	       keys instead of standard	 escape	 sequences.   The  default  is
	       "false",	i.e., this feature is disabled.

	       See also	the keyboardType resource.

       termName	(class TermName)
	       Specifies the terminal type name	to be set in the TERM environ-
	       ment variable.

       title (class Title)
	       Specifies a string that may be used by the window manager  when
	       displaying this application.

       toolBar (class ToolBar)
	       Specifies  whether or not the toolbar should be displayed.  The
	       default is "true".

       ttyModes	(class TtyModes)
	       Specifies a string containing terminal setting keywords and the
	       characters  to which they may be	bound.	Allowable keywords in-
	       clude: brk, dsusp, eof, eol, eol2, erase, erase2, flush,	 intr,
	       kill,  lnext, quit, rprnt, start, status, stop, susp, swtch and
	       weras.  Control characters may be specified as ^char (e.g.,  ^c
	       or  ^u) and ^? may be used to indicate delete (127).  Use ^- to
	       denote undef.  Use \034 to represent ^\,	since a	literal	 back-
	       slash in	an X resource escapes the next character.

	       This  is	 very  useful for overriding the default terminal set-
	       tings without having to do an  stty  every  time	 an  xterm  is
	       started.	  Note,	however, that the stty program on a given host
	       may use different keywords; xterm's table is built-in.

	       If the ttyModes resource	specifies  a  value  for  erase,  that
	       overrides  the  ptyInitialErase	resource  setting, i.e., xterm
	       initializes the terminal	to match that value.

       useInsertMode (class UseInsertMode)
	       Force use of insert mode	by adding appropriate entries  to  the
	       TERMCAP	environment  variable.	 This  is useful if the	system
	       termcap is broken.  The default is "false".

       utmpDisplayId (class UtmpDisplayId)
	       Specifies whether or not	xterm should try to record the display
	       identifier  (display  number  and screen	number)	as well	as the
	       hostname	in the system utmp log file.  The default is "true".

       utmpInhibit (class UtmpInhibit)
	       Specifies whether or not	xterm should try to record the	user's
	       terminal	 in the	system utmp log	file.  If true,	xterm will not
	       try.  The default is "false".

       waitForMap (class WaitForMap)
	       Specifies whether or not	xterm should wait for the initial win-
	       dow  map	 before	 starting the subprocess.  This	is part	of the
	       ptyHandshake logic.  When xterm is directed  to	wait  in  this
	       fashion,	 it  passes  the terminal size from the	display	end of
	       the pseudo-terminal to the terminal I/O connection,  e.g.,  ac-
	       cording	to the window manager.	Otherwise, it uses the size as
	       given in	resource values	or command-line	option -geom.  The de-
	       fault is	"false".

       zIconBeep (class	ZIconBeep)
	       Same as -ziconbeep command line argument.  If the value of this
	       resource	is non-zero, xterms that produce output	 while	iconi-
	       fied  will  cause  an  XBell sound at the given volume and have
	       "*** " prepended	to their icon titles.	Most  window  managers
	       will  detect  this change immediately, showing you which	window
	       has the output.	(A similar feature was in x10 xterm.)  The de-
	       fault is	"false".

       zIconTitleFormat	(class ZIconTitleFormat)
	       Allow  customization  of	 the string used in the	zIconBeep fea-
	       ture.  The default value	is "***	%s".

	       If the resource value contains a	"%s", then xterm  inserts  the
	       icon  title  at that point rather than prepending the string to
	       the icon	title.	(Only the first	"%s" is	used).

   VT100 Widget	Resources
       The following resources are specified  as  part	of  the	 vt100	widget
       (class	 VT100).    They   are	 specified   by	  patterns   such   as
       "XTerm.vt100.NAME".

       If your xterm is	configured to support the "toolbar", then  those  pat-
       terns  need  an extra level for the form-widget which holds the toolbar
       and vt100 widget.  A wildcard between the  top-level  "XTerm"  and  the
       "vt100"	widget	makes  the  resource  settings	work for either, e.g.,
       "XTerm*vt100.NAME".

       activeIcon (class ActiveIcon)
	       Specifies whether or not	active icon windows  are  to  be  used
	       when the	xterm window is	iconified, if this feature is compiled
	       into xterm.  The	active icon is a miniature  representation  of
	       the  content  of	 the  window  and  will	 update	as the content
	       changes.	 Not all window	managers necessarily support  applica-
	       tion  icon windows.  Some window	managers will allow you	to en-
	       ter keystrokes into the active icon  window.   The  default  is
	       "default".

	       Xterm  accepts  either  a keyword (ignoring case) or the	number
	       shown in	parentheses:

	       false (0)
		      No active	icon is	shown.

	       true (1)
		      The active icon is shown.	 If you	 are  using  twm,  use
		      this setting to enable active-icons.

	       default (2)
		      xterm  checks  at	startup, and shows an active icon only
		      for window managers which	it can identify	and which  are
		      known to support the feature.  These are fvwm (full sup-
		      port), and window	maker (limited).  A few	other  windows
		      managers	(such  as  twm and ctwm) support active	icons,
		      but do not support the extensions	which allow  xterm  to
		      identify the window manager.

       allowBoldFonts (class AllowBoldFonts)
	       When set	to "false", xterm will not use bold fonts.  This over-
	       rides both the alwaysBoldMode and the boldMode resources.   al-
	       waysBoldMode (class AlwaysBoldMode)

       allowC1Printable	(class AllowC1Printable)
	       If  true,  overrides the	mapping	of C1 controls (codes 128-159)
	       to make them be treated as if they were	printable  characters.
	       Although	this corresponds to no particular standard, some users
	       insist it is a VT100.  The default is "false".

       allowColorOps (class AllowColorOps)
	       Specifies whether control sequences that	set/query the  dynamic
	       colors  should  be allowed.  ANSI colors	are unaffected by this
	       resource	setting.  The default is "true".

       allowFontOps (class AllowFontOps)
	       Specifies whether control sequences  that  set/query  the  font
	       should be allowed.  The default is "true".

       allowPasteControls (class AllowPasteControls)
	    If	true,  allow  control  characters  such	 as  BEL and CAN to be
	    pasted.  Formatting	characters (tab, newline) are always  allowed.
	    Other C0 control characters	are suppressed unless this resource is
	    enabled.  The exact	set of control characters (C0 and C1)  depends
	    upon  whether UTF-8	encoding is used, as well as the allowC1Print-
	    able resource.  The	default	is "false".

       allowScrollLock (class AllowScrollLock)
	       Specifies whether control sequences that	set/query  the	Scroll
	       Lock  key should	be allowed, as well as whether the Scroll Lock
	       key responds to user's keypress.	 The default is	"false".

	       When this feature is enabled, xterm will	sense the state	of the
	       Scroll  Lock  key  each	time  it acquires focus.  Pressing the
	       Scroll Lock key toggles xterm's internal	state, as well as tog-
	       gling  the  associated  LED.   While the	Scroll Lock is active,
	       xterm attempts to keep a	viewport on the	same set of lines.  If
	       the  current  viewport  is  scrolled  past the limit set	by the
	       saveLines resource, then	Scroll Lock has	no further effect.

	       The reason for setting the default to "false" is	to avoid  user
	       surprise.   This	key is generally unused	in keyboard configura-
	       tions, and has not acquired a standard meaning even when	it  is
	       used  in	that manner.  Consequently, users have assigned	it for
	       ad hoc purposes.

       allowSendEvents (class AllowSendEvents)
	       Specifies whether or not	synthetic key and button events	 (gen-
	       erated using the	X protocol SendEvent request) should be	inter-
	       preted or discarded.  The default is "false" meaning  they  are
	       discarded.   Note that allowing such events would create	a very
	       large security hole, therefore enabling	this  resource	force-
	       fully  disables	the  allowXXXOps  resources.   The  default is
	       "false".

       allowTcapOps (class AllowTcapOps)
	       Specifies whether control sequences that	query  the  terminal's
	       notion  of its function-key strings, as termcap or terminfo ca-
	       pabilities should be allowed.  The default is "true".

	       A few programs, e.g., vim, use this feature to get an  accurate
	       description  of the terminal's capabilities, independent	of the
	       termcap/terminfo	setting:

	       o   xterm can tell the querying program how many	colors it sup-
		   ports.   This  is  a	 constant, depending on	how it is com-
		   piled, typically 16.	 It does not change if you  alter  re-
		   source settings, e.g., the boldColors resource.

	       o   xterm  can  tell the	querying program what strings are sent
		   by modified (shift-,	control-, alt-)	function- and  keypad-
		   keys.   Reporting  control-	and alt-modifiers is a feature
		   that	relies on the ncurses extended naming.

       allowTitleOps (class AllowTitleOps)
	       Specifies whether control sequences that	modify the window  ti-
	       tle or icon name	should be allowed.  The	default	is "true".

       allowWindowOps (class AllowWindowOps)
	       Specifies whether extended window control sequences (as used in
	       dtterm) should be allowed.  These include several  control  se-
	       quences	which  manipulate the window size or position, as well
	       as reporting these values and the title or icon name.  Each  of
	       these can be abused in a	script;	curiously enough most terminal
	       emulators that implement	these restrict only a  small  part  of
	       the repertoire.	For fine-tuning, see disallowedWindowOps.  The
	       default is "false".

       altIsNotMeta (class AltIsNotMeta)
	       If "true", treat	the Alt-key as if it were the Meta-key.	  Your
	       keyboard	may happen to be configured so they are	the same.  But
	       if they are not,	this allows you	to use the  same  prefix-  and
	       shifting	operations with	the Alt-key as with the	Meta-key.  See
	       altSendsEscape and metaSendsEscape.  The	default	is "false".

       altSendsEscape (class AltSendsEscape)
	       This is an additional keyboard operation	that may be  processed
	       after  the  logic for metaSendsEscape.  It is only available if
	       the altIsNotMeta	resource is set.

	       o   If "true", Alt characters (a	character  combined  with  the
		   modifier associated with left/right Alt-keys) are converted
		   into	a two-character	sequence  with	the  character	itself
		   preceded by ESC.  This applies as well to function key con-
		   trol	sequences, unless xterm	sees that Alt is used in  your
		   key translations.

	       o   If  "false",	Alt characters input from the keyboard cause a
		   shift to 8-bit characters (just like	metaSendsEscape).   By
		   combining  the Alt- and Meta-modifiers, you can create cor-
		   responding combinations of ESC-prefix and 8-bit characters.

	       The default is "False".	Xterm provides a menu option for  tog-
	       gling this resource.

       alternateScroll (class ScrollCond)
	       If  "true",  the	 scroll-back and scroll-forw actions send cur-
	       sor-up and -down	keys when xterm	is  displaying	the  alternate
	       screen.	The default is "false".

	       The  alternateScroll  state can also be set using a control se-
	       quence.

       alwaysBoldMode (class AlwaysBoldMode)
	       Specifies whether xterm should check if	the  normal  and  bold
	       fonts  are distinct before deciding whether to use overstriking
	       to simulate bold	fonts.	If this	resource is true,  xterm  does
	       not make	the check for distinct fonts when deciding how to han-
	       dle the boldMode	resource.  The default is "false".

	       boldMode	  alwaysBoldMode   Comparison	Action
	       ----------------------------------------------------
	       false	  false		   ignored	use font
	       false	  true		   ignored	use font
	       true	  false		   same		overstrike
	       true	  false		   different	use font
	       true	  true		   ignored	overstrike

	       This resource is	used only for bitmap fonts:

	       o   When	using bitmap fonts,  it	 is  possible  that  the  font
		   server  will	approximate the	bold font by rescaling it from
		   a different font size than  expected.   The	alwaysBoldMode
		   resource  allows  the user to override the (sometimes poor)
		   resulting bold font with overstriking (which	 is  at	 least
		   consistent).

	       o   The	problem	 does  not  occur  with	TrueType fonts (though
		   there can be	other unnecessary  issues  such	 as  different
		   coverage of the normal and bold fonts).

	       As an alternative, setting the allowBoldFonts resource to false
	       overrides both the alwaysBoldMode and the boldMode resources.

       alwaysHighlight (class AlwaysHighlight)
	       Specifies whether or not	xterm should always  display  a	 high-
	       lighted text cursor.  By	default	(if this resource is false), a
	       hollow text cursor is displayed whenever	the pointer moves  out
	       of the window or	the window loses the input focus.  The default
	       is "false".

       alwaysUseMods (class AlwaysUseMods)
	       Override	the numLock resource, telling xterm to use the Alt and
	       Meta  modifiers	to  construct  parameters for function key se-
	       quences even if those modifiers appear in the translations  re-
	       source.	 Normally  xterm  checks  if  Alt or Meta is used in a
	       translation that	would conflict with  function  key  modifiers,
	       and  will ignore	these modifiers	in that	special	case.  The de-
	       fault is	"false".

       answerbackString	(class AnswerbackString)
	       Specifies the string that xterm sends in	 response  to  an  ENQ
	       (control/E)  character  from  the host.	The default is a blank
	       string, i.e., "".  A hardware VT100 implements this feature  as
	       a setup option.

       appcursorDefault	(class AppcursorDefault)
	       If  "true",  the	cursor keys are	initially in application mode.
	       This is the same	as the VT102 private DECCKM mode, The  default
	       is "false".

       appkeypadDefault	(class AppkeypadDefault)
	       If  "true",  the	keypad keys are	initially in application mode.
	       The default is "false".

       assumeAllChars (class AssumeAllChars)
	       If "true", this enables a special case in bitmap	fonts to allow
	       the  font  server to choose how to display missing glyphs.  The
	       default is "true".

	       The reason for this resource is to help with certain  quasi-au-
	       tomatically  generated  fonts (such as the ISO-10646-1 encoding
	       of Terminus) which have incorrect font-metrics.

       autoWrap	(class AutoWrap)
	       Specifies whether or not	 auto-wraparound  should  be  enabled.
	       This is the same	as the VT102 DECAWM.  The default is "true".

       awaitInput (class AwaitInput)
	       Specifies  whether or not the xterm uses	a 50 millisecond time-
	       out to await input (i.e., to support the	 Xaw3d	arrow  scroll-
	       bar).  The default is "false".

       backarrowKey (class BackarrowKey)
	       Specifies  whether  the backarrow key transmits a backspace (8)
	       or delete (127) character.  This	corresponds to the DECBKM con-
	       trol  sequence.	 A  "true" value specifies backspace.  The de-
	       fault is	"True".	 Pressing the control key toggles this	behav-
	       ior.

       background (class Background)
	       Specifies  the  color  to use for the background	of the window.
	       The default is "XtDefaultBackground".

       bellIsUrgent (class BellIsUrgent)
	       Specifies whether to set	the Urgency hint for the  window  man-
	       ager when making	a bell sound.  The default is "false".

       bellOnReset (class BellOnReset)
	       Specifies whether to sound a bell when doing a hard reset.  The
	       default is "true".

       bellSuppressTime	(class BellSuppressTime)
	       Number of milliseconds after a  bell  command  is  sent	during
	       which additional	bells will be suppressed.  Default is 200.  If
	       set non-zero, additional	bells will also	 be  suppressed	 until
	       the  server  reports that processing of the first bell has been
	       completed; this feature is most useful with the visible bell.

       boldColors (class ColorMode)
	       Specifies whether to combine bold attribute  with  colors  like
	       the  IBM	 PC,  i.e., map	colors 0 through 7 to colors 8 through
	       15.  These normally are the brighter versions of	 the  first  8
	       colors, hence bold.  The	default	is "true".

       boldFont	(class BoldFont)
	       Specifies  the  name  of	 the bold font to use instead of over-
	       striking.  There	is no default for this resource.

	       This font must be the same height and width as the normal font,
	       otherwise  it  is  ignored.   If	only one of the	normal or bold
	       fonts is	specified, it will be used as the normal font and  the
	       bold font will be produced by overstriking this font.

	       See  also  the  discussion  of  boldMode	and alwaysBoldMode re-
	       sources.

       boldMode	(class BoldMode)
	       This specifies whether or not  text  with  the  bold  attribute
	       should  be  overstruck  to  simulate bold fonts if the resolved
	       bold font is the	same as	the normal font.  It may be  desirable
	       to disable bold fonts when color	is being used for the bold at-
	       tribute.

	       Note that xterm has one bold font which you may set explicitly.
	       Xterm  attempts to derive a bold	font for the other font	selec-
	       tions (font1 through font6).  If	it cannot find a bold font, it
	       will  use  the normal font.  In each case (whether the explicit
	       resource	or the derived font), if the normal and	bold fonts are
	       distinct, this resource has no effect.  The default is "true".

	       See  the	 alwaysBoldMode	resource which can modify the behavior
	       of this resource.

	       Although	xterm attempts to derive a bold	font  for  other  font
	       selections,  the	 font  server may not cooperate.  Since	X11R6,
	       bitmap fonts have been scaled.  The font	server claims to  pro-
	       vide  the  bold font that xterm requests, but the result	is not
	       always readable.	 XFree86 introduced a  feature	which  can  be
	       used  to	suppress the scaling.  In the X	server's configuration
	       file (e.g., "/etc/X11/XFree86"),	you can	add ":unscaled"	to the
	       end  of the directory specification for the "misc" fonts, which
	       comprise	the fixed-pitch	fonts that are used by xterm.  For ex-
	       ample

		   FontPath		    "/usr/lib/X11/fonts/misc/"

	       would become

		   FontPath		    "/usr/lib/X11/fonts/misc/:unscaled"

	       Depending  on  your configuration, the font server may have its
	       own configuration file.	The same ":unscaled" can be  added  to
	       its  configuration  file	at the end of the directory specifica-
	       tion for	"misc".

	       The bitmap scaling feature is also used by xterm	 to  implement
	       VT102 double-width and double-height characters.

       brokenLinuxOSC (class BrokenLinuxOSC)
	       If true,	xterm applies a	workaround to ignore malformed control
	       sequences that a	Linux script might send.  Compare the  palette
	       control	sequences  documented  in  console_codes with ECMA-48.
	       The default is "true".

       brokenSelections	(class BrokenSelections)
	       If true,	xterm in 8-bit mode will interpret  STRING  selections
	       as  carrying  text  in the current locale's encoding.  Normally
	       STRING selections carry ISO-8859-1 encoded text.	 Setting  this
	       resource	to "true" violates the ICCCM; it may, however, be use-
	       ful for interacting with	some broken X clients.	The default is
	       "false".

       brokenStringTerm	(class BrokenStringTerm)
	       provides	a work-around for some ISDN routers which start	an ap-
	       plication control string	without	completing it.	 Set  this  to
	       "true" if xterm appears to freeze when connecting.  The default
	       is "false".

	       Xterm's	state  parser  recognizes  several  types  of  control
	       strings which can contain text, e.g.,

	       APC (Application	Program	Command),
	       DCS (Device Control String),
	       OSC (Operating System Command),
	       PM (Privacy Message), and
	       SOS (Start of String),

	       Each  should  end with a	string-terminator (a special character
	       which cannot appear in these strings).  Ordinary	control	 char-
	       acters  found  within the string	are not	ignored; they are pro-
	       cessed without interfering with the process of accumulating the
	       control	string's  content.  Xterm recognizes these controls in
	       all modes, although some	of the functions may be	suppressed af-
	       ter parsing the control.

	       When  enabled, this feature allows the user to exit from	an un-
	       terminated control string when any of  these  ordinary  control
	       characters are found:

	       control/D (used as an end of file in many shells),
	       control/H (backspace),
	       control/I (tab-feed),
	       control/J (line feed aka	newline),
	       control/K (vertical tab),
	       control/L (form feed),
	       control/M (carriage return),
	       control/N (shift-out),
	       control/O (shift-in),
	       control/Q (XOFF),
	       control/X (cancel)

       c132 (class C132)
	       Specifies  whether  or  not  the	VT102 DECCOLM escape sequence,
	       used to switch between 80 and 132 columns, should  be  honored.
	       The default is "false".

       cacheDoublesize (class CacheDoublesize)
	       Tells  whether  to cache	double-sized fonts by xterm.  Set this
	       to zero to disable double-sized fonts altogether.

       cdXtraScroll (class CdXtraScroll)
	       Specifies whether xterm should scroll to	a new page when	clear-
	       ing  the	 whole	screen.	 Like tiXtraScroll, the	intent of this
	       option is to provide a picture of the full-screen application's
	       display	on the scrollback before wiping	out the	text.  The de-
	       fault for this resource is "false".

       charClass (class	CharClass)
	       Specifies comma-separated lists of character class bindings  of
	       the form	[low-]high:value.  These are used in determining which
	       sets of characters should be treated the	same  when  doing  cut
	       and paste.  See the CHARACTER CLASSES section.

       cjkWidth	(class CjkWidth)
	       Specifies  whether  xterm  should  follow  the traditional East
	       Asian width convention.	When turned on,	characters  with  East
	       Asian  Ambiguous	 (A) category in UTR 11	have a column width of
	       2.  You may have	to set this option to "true" if	you have  some
	       old  East  Asian	terminal based programs	that assume that line-
	       drawing characters have a column	width of 2.  If	this  resource
	       is  false, the mkWidth resource controls	the choice between the
	       system's	wcwidth	and xterm's built-in tables.  The  default  is
	       "false".

       color0 (class Color0)

       color1 (class Color1)

       color2 (class Color2)

       color3 (class Color3)

       color4 (class Color4)

       color5 (class Color5)

       color6 (class Color6)

       color7 (class Color7)
	       These  specify  the colors for the ISO-6429 extension.  The de-
	       faults are, respectively, black,	red3, green3, yellow3, a  cus-
	       tomizable  dark blue, magenta3, cyan3, and gray90.  The default
	       shades of color are chosen to allow the colors 8-15 to be  used
	       as brighter versions.

       color8 (class Color8)

       color9 (class Color9)

       color10 (class Color10)

       color11 (class Color11)

       color12 (class Color12)

       color13 (class Color13)

       color14 (class Color14)

       color15 (class Color15)
	       These specify the colors	for the	ISO-6429 extension if the bold
	       attribute is also enabled.  The default resource	values are re-
	       spectively,  gray30,  red,  green, yellow, a customizable light
	       blue, magenta, cyan, and	white.

       color16 (class Color16)

       through

       color255	(class Color255)
	       These specify the colors	for the	256-color extension.  The  de-
	       fault  resource	values are for colors 16 through 231 to	make a
	       6x6x6 color  cube,  and	colors	232  through  255  to  make  a
	       grayscale ramp.

	       Resources  past color15 are available as	a compile-time option.
	       Due to a	hardcoded limit	in the X libraries on the total	number
	       of resources (to	400), the resources for	256-colors are omitted
	       when wide-character support and luit are	enabled.  Besides  in-
	       consistent behavior if only part	of the resources were allowed,
	       determining the exact cutoff is difficult, and the X  libraries
	       tend  to	 crash	if  the	number of resources exceeds the	limit.
	       The color palette is still initialized to the same default val-
	       ues, and	can be modified	via control sequences.

	       On the other hand, the resource limit does permit including the
	       entire range for	88-colors.

       colorAttrMode (class ColorAttrMode)
	       Specifies whether colorBD, colorBL, colorRV, and	colorUL	should
	       override	ANSI colors.  If not, these are	displayed only when no
	       ANSI colors have	been set for the corresponding position.   The
	       default is "false".

       colorBD (class ColorBD)
	       This  specifies	the color to use to display bold characters if
	       the "colorBDMode" resource is enabled.  The default  is	"XtDe-
	       faultForeground".

	       See  also  the  veryBoldColors  resource	which allows combining
	       bold and	color.

       colorBDMode (class ColorAttrMode)
	       Specifies whether characters with the bold attribute should  be
	       displayed  in  color  or	as bold	characters.  Note that setting
	       colorMode off disables all colors, including bold.  The default
	       is "false".

       colorBL (class ColorBL)
	       This  specifies the color to use	to display blink characters if
	       the "colorBLMode" resource is enabled.  The default  is	"XtDe-
	       faultForeground".

	       See also	the veryBoldColors resource which allows combining un-
	       derline and color.

       colorBLMode (class ColorAttrMode)
	       Specifies whether characters with the blink attribute should be
	       displayed  in  color.  Note that	setting	colorMode off disables
	       all colors, including this.  The	default	is "false".

       colorMode (class	ColorMode)
	       Specifies whether or not	recognition of ANSI  (ISO-6429)	 color
	       change  escape  sequences  should  be  enabled.	The default is
	       "true".

       colorRV (class ColorRV)
	       This specifies the color	to use to display  reverse  characters
	       if  the	"colorRVMode"  resource	 is  enabled.	The default is
	       "XtDefaultForeground".

	       See also	the veryBoldColors resource which allows combining re-
	       verse and color.

       colorRVMode (class ColorAttrMode)
	       Specifies  whether characters with the reverse attribute	should
	       be displayed in color.  Note that setting  colorMode  off  dis-
	       ables all colors, including this.  The default is "false".

       colorUL (class ColorUL)
	       This  specifies	the color to use to display underlined charac-
	       ters if the "colorULMode" resource is enabled.  The default  is
	       "XtDefaultForeground".

	       See also	the veryBoldColors resource which allows combining un-
	       derline and color.

       colorULMode (class ColorAttrMode)
	       Specifies  whether  characters  with  the  underline  attribute
	       should be displayed in color or as underlined characters.  Note
	       that setting colorMode off disables all colors,	including  un-
	       derlining.  The default is "false".

       combiningChars (class CombiningChars)
	       Specifies  the number of	wide-characters	which can be stored in
	       a cell to overstrike (combine) with the base character  of  the
	       cell.   This can	be set to values in the	range 0	to 4.  The de-
	       fault is	"2".

       ctrlFKeys (class	CtrlFKeys)
	       In VT220	keyboard mode (see  sunKeyboard	 resource),  specifies
	       the  amount  by	which to shift F1-F12 given a control modifier
	       (CTRL).	This allows you	to generate key	symbols	for F10-F20 on
	       a  Sun/PC keyboard.  The	default	is "10", which means that CTRL
	       F1 generates the	key symbol for F11.

       curses (class Curses)
	       Specifies whether or not	the last column	bug in more(1)	should
	       be worked around.  See the -cu option for details.  The default
	       is "false".

       cursorBlink (class CursorBlink)
	       Specifies whether to make the cursor  blink.   The  default  is
	       "false".

	       Xterm  uses  two	 variables  to	determine  whether  the	cursor
	       blinks.	One is set by this resource.  The other	is set by con-
	       trol sequences (private mode 12 and DECSCUSR).  Xterm tests the
	       XOR of the two variables.

       cursorColor (class CursorColor)
	       Specifies the color to use for the text cursor.	The default is
	       "XtDefaultForeground".  By default, xterm attempts to keep this
	       color from being	the same as the	 background  color,  since  it
	       draws the cursor	by filling the background of a text cell.  The
	       same restriction	applies	to control sequences which may	change
	       this color.

	       Setting	this resource overrides	most of	xterm's	adjustments to
	       cursor color.  It will still use	reverse-video to disallow some
	       cases, such as a	black cursor on	a black	background.

       cursorOffTime (class CursorOffTime)
	       Specifies  the  duration	 of the	"off" part of the cursor blink
	       cycle-time in milliseconds.  The	same timer is  used  for  text
	       blinking.  The default is "300".

       cursorOnTime (class CursorOnTime)
	       Specifies the duration of the "on" part of the cursor blink cy-
	       cle-time, in milliseconds.  The same timer  is  used  for  text
	       blinking.  The default is "600".

       cutNewline (class CutNewline)
	       If  "false",  triple clicking to	select a line does not include
	       the Newline at the end of the line.  If "true", the Newline  is
	       selected.  The default is "true".

       cursorUnderLine (class CursorUnderLine)
	       Specifies  whether to make the cursor underlined	or a box.  The
	       default is "false".

       cutToBeginningOfLine (class CutToBeginningOfLine)
	       If "false", triple clicking to select a line selects only  from
	       the  current  word  forward.  If	"true",	the entire line	is se-
	       lected.	The default is "true".

       decTerminalID (class DecTerminalID)
	       Specifies the emulation	level  (100=VT100,  220=VT220,	etc.),
	       used  to	 determine  the	 type  of response to a	DA control se-
	       quence.	 Leading  non-digit  characters	 are  ignored,	 e.g.,
	       "vt100" and "100" are the same.	The default is "420".

       defaultString (class DefaultString)
	       Specify	the  character (or string) which xterm will substitute
	       when pasted text	includes a character which  cannot  be	repre-
	       sented  in  the	current	encoding.  For instance, pasting UTF-8
	       text into a display of ISO-8859-1 characters will only be  able
	       to  display  codes  0-255, while	UTF-8 text can include Unicode
	       values above 255.  The default is "#" (a	single pound sign).

	       If the undisplayable text would be double-width,	xterm will add
	       a  space	after the "#" character, to give roughly the same lay-
	       out on the screen as the	original text.

       deleteIsDEL (class DeleteIsDEL)
	       Specifies whether the Delete key	on the editing	keypad	should
	       send  DEL  (127)	 or the	VT220-style Remove escape sequence.  A
	       "false" value enables the latter.  The default is "Maybe".

       disallowedColorOps (class DisallowedColorOps)
	       Specify which features will be  disabled	 if  allowColorOps  is
	       false.	This  is a comma-separated list	of names.  The default
	       value is
	       SetColor,GetColor,GetAnsiColor

	       The names are listed below.  xterm ignores capitalization,  but
	       they are	shown in mixed-case for	clarity.

	       SetColor
		    Set	a specific dynamic color.

	       GetColor
		    Report the current setting of a given dynamic color.

	       GetAnsiColor
		    Report the current setting of a given ANSI color (actually
		    any	of the colors set via ANSI-style controls).

       disallowedFontOps (class	DisallowedFontOps)
	       Specify which features will  be	disabled  if  allowFontOps  is
	       false.	This  is a comma-separated list	of names.  The default
	       value is
	       SetFont,GetFont

	       The names are listed below.  xterm ignores capitalization,  but
	       they are	shown in mixed-case for	clarity.

	       SetFont
		    Set	the specified font.

	       GetFont
		    Report the specified font.

       disallowedTcapOps (class	DisallowedTcapOps)
	       Specify	which  features	 will  be  disabled if allowTcapOps is
	       false.  This is a comma-separated list of names.	  The  default
	       value is
	       SetTcap,GetTcap

	       The  names are listed below.  xterm ignores capitalization, but
	       they are	shown in mixed-case for	clarity.

	       SetTcap
		    (not implemented)

	       GetTcap
		    Report specified function- and other special keys.

       disallowedWindowOps (class DisallowedWindowOps)
	       Specify which features will be disabled	if  allowWindowOps  is
	       false.	This  is  a comma-separated list of names, or (for the
	       controls	adapted	from dtterm the	operation  number).   The  de-
	       fault value is
	       20,21,SetXprop,SetSelection

	       The  names are listed below.  xterm ignores capitalization, but
	       they are	shown in mixed-case for	clarity.  Where	a  number  can
	       be used as an alternative, it is	given in parentheses after the
	       name.

	       GetIconTitle (20)
		    Report xterm window's icon label as	a string.

	       GetScreenSizeChars (19)
		    Report the size of the screen in characters	as numbers.

	       GetSelection
		    Report selection data as a base64 string.

	       GetWinPosition (13)
		    Report xterm window	position as numbers.

	       GetWinSizeChars (18)
		    Report the size of the text	area in	characters as numbers.

	       GetWinSizePixels	(14)
		    Report xterm window	in pixels as numbers.

	       GetWinState (11)
		    Report xterm window	state as a number.

	       GetWinTitle (21)
		    Report xterm window's title	as a string.

	       LowerWin	(6)
		    Lower the xterm window to the bottom of the	 stacking  or-
		    der.

	       MaximizeWin (9)
		    Maximize window (i.e., resize to screen size).

	       FullscreenWin (10)
		    Use	full screen (i.e., resize to screen size, without win-
		    dow	decorations).

	       MinimizeWin (2)
		    Iconify window.

	       PopTitle	(23)
		    Pop	title from internal stack.

	       PushTitle (22)
		    Push title to internal stack.

	       RaiseWin	(5)
		    Raise the xterm window to the front	of the stacking	order.

	       RefreshWin (7)
		    Refresh the	xterm window.

	       RestoreWin (1)
		    De-iconify window.

	       SetSelection
		    Set	selection data.

	       SetWinLines
		    Resize to a	given number of	lines, at least	24.

	       SetWinPosition (3)
		    Move window	to given coordinates.

	       SetWinSizeChars (8)
		    Resize the text area to given size in characters.

	       SetWinSizePixels	(4)
		    Resize the xterm window to given size in pixels.

	       SetXprop
		    Set	X property on top-level	window.

       dynamicColors (class DynamicColors)
	       Specifies whether or not	escape sequences to change colors  as-
	       signed to different attributes are recognized.

       eightBitControl (class EightBitControl)
	       Specifies whether or not	control	sequences sent by the terminal
	       should be eight-bit characters or escape	 sequences.   The  de-
	       fault is	"false".

       eightBitInput (class EightBitInput)
	       If  "true",  Meta  characters (a	single-byte character combined
	       with the	Meta modifier key) input from the  keyboard  are  pre-
	       sented  as a single character, modified according to the	eight-
	       BitMeta resource.  If "false", Meta  characters	are  converted
	       into  a	two-character  sequence	with the character itself pre-
	       ceded by	ESC.  The default is "true".

	       The metaSendsEscape and altSendsEscape resources	 may  override
	       this  feature.	Generally  keyboards do	not have a key labeled
	       "Meta", but "Alt" keys are common, and they are	conventionally
	       used  for  "Meta".  If they were	synonymous, it would have been
	       reasonable to name this	resource  "altSendsEscape",  reversing
	       its  sense.  For	more background	on this, see the meta function
	       in curses.

	       Note that the Alt key is	not necessarily	the same as  the  Meta
	       modifier.   xmodmap  lists your key modifiers.  X defines modi-
	       fiers for shift,	(caps) lock and	control, as well  as  5	 addi-
	       tional modifiers	which are generally used to configure key mod-
	       ifiers.	xterm inspects the same	information to find the	 modi-
	       fier  associated	with either Meta key (left or right), and uses
	       that key	as the Meta modifier.  It also looks for  the  NumLock
	       key, to recognize the modifier which is associated with that.

	       If  your	 xmodmap configuration uses the	same keycodes for Alt-
	       and Meta-keys, xterm will only  see  the	 Alt-key  definitions,
	       since  those  are  tested  before Meta-keys.  NumLock is	tested
	       first.  It is important to keep these keys distinct;  otherwise
	       some of xterm's functionality is	not available.

	       The  eightBitInput  resource  is	 tested	 at  startup time.  If
	       "true", the xterm tries to put the terminal  into  8-bit	 mode.
	       If  "false",  on	 startup, xterm	tries to put the terminal into
	       7-bit mode.  For	 some  configurations  this  is	 unsuccessful;
	       failure	is  ignored.  After startup, xterm does	not change the
	       terminal	between	8-bit and 7-bit	mode.

	       As originally implemented in X11, the resource  value  did  not
	       change after startup.  However (since patch #216	in 2006) xterm
	       can modify eightBitInput	after startup via a control  sequence.
	       The corresponding terminfo capabilities smm (set	meta mode) and
	       rmm (reset meta mode) have been recognized  by  bash  for  some
	       time.   Interestingly enough, bash's notion of "meta mode" dif-
	       fers from the standard definition  (in  the  terminfo  manual),
	       which  describes	 the  change to	the eighth bit of a character.
	       It happens that bash views "meta	mode"  as  the	ESC  character
	       that  xterm  puts before	a character when a special meta	key is
	       pressed.	 bash's	early documentation talks about	the ESC	 char-
	       acter and ignores the eighth bit.

       eightBitMeta (class EightBitMeta)
	       This  controls  the way xterm modifies the eighth bit of	a sin-
	       gle-byte	key when the eightBitInput resource is set.   The  de-
	       fault is	"locale".

	       The  resource  value  is	a string, evaluated as a boolean after
	       startup.

	       false
		    The	key is sent unmodified.

	       locale
		    The	key is modified	only if	the locale uses	eight-bit  en-
		    coding.

	       true The	key is sent modified.

	       never
		    The	key is always sent unmodified.

	       Except for the never choice, xterm honors the terminfo capabil-
	       ities smm (set meta mode) and rmm (reset	meta  mode),  allowing
	       the feature to be turned	on or off dynamically.

	       If  eightBitMeta	 is  enabled when the locale uses UTF-8, xterm
	       encodes the value as UTF-8 (since patch #183 in 2003).

       eightBitOutput (class EightBitOutput)
	       Specifies whether or not	eight-bit  characters  sent  from  the
	       host  should  be	 accepted as is	or stripped when printed.  The
	       default is "true", which	means that they	are accepted as	is.

       eightBitSelectTypes (class EightBitSelectTypes)
	       Override	 xterm's  default  selection  target  list  (see   SE-
	       LECT/PASTE)  for	 selections  in	normal (ISO-8859-1) mode.  The
	       default is an empty string, i.e., "", which does	 not  override
	       anything.

       faceName	(class FaceName)
	       Specify	the  pattern  for  scalable  fonts  selected  from the
	       FreeType	library	if support for that library was	compiled  into
	       xterm.  There is	no default value.

	       If  not	specified, or if there is no match for both normal and
	       bold fonts, xterm uses the bitmap font and related resources.

	       It is possible to select	suitable bitmap	fonts using  a	script
	       such as this:

		   #!/bin/sh
		   FONT=`xfontsel -print`
		   test	-n "$FONT" && xfd -fn "$FONT"

	       However	(even  though  xfd  accepts  a	"-fa" option to	denote
	       FreeType	fonts),	xfontsel has not been similarly	extended.   As
	       a workaround, you may try

		   fc-list :scalable=true:spacing=mono:	family

	       to  find	a list of scalable fixed-pitch fonts which may be used
	       for the faceName	resource value.

       faceNameDoublesize (class FaceNameDoublesize)
	       Specify a double-width scalable font for	cases where an	appli-
	       cation  requires	 this, e.g., in	CJK applications.  There is no
	       default value.

	       If the application uses double-wide  characters	and  this  re-
	       source  is  not	given,	xterm will use a scaled	version	of the
	       font given by faceName.

       faceSize	(class FaceSize)
	       Specify the pointsize for fonts selected	from the FreeType  li-
	       brary if	support	for that library was compiled into xterm.  The
	       default is "14.0" On the	VT Fonts menu, this corresponds	to the
	       Default entry.

	       Although	the default is "14.0", this may	not be the same	as the
	       pointsize for the default bitmap	font, i.e., that assigned with
	       the -fn option, or the font resource.  For example, the "fixed"
	       font usually has	a pointsize of "8.0".  If you set faceSize  to
	       match  the size of the bitmap font, then	switching between bit-
	       map and TrueType	fonts via the font menu	will  give  comparable
	       sizes for the window.

	       You  can	specify	the pointsize for TrueType fonts selected with
	       the other size-related menu entries such	as Medium, Huge, etc.,
	       by  using  one of the following resource	values.	 If you	do not
	       specify a value,	they default to	"0.0", which causes  xterm  to
	       use  the	ratio of font sizes from the corresponding bitmap font
	       resources to obtain a TrueType pointsize.

	       If all of the faceSize resources	are set, then xterm  will  use
	       this  information to determine the next smaller/larger TrueType
	       font for	the larger-vt-font()  and  smaller-vt-font()  actions.
	       If any are not set, xterm will use only the areas of the	bitmap
	       fonts.

       faceSize1 (class	FaceSize1)
	       Specifies the pointsize of the first alternative	font.

       faceSize2 (class	FaceSize2)
	       Specifies the pointsize of the second alternative font.

       faceSize3 (class	FaceSize3)
	       Specifies the pointsize of the third alternative	font.

       faceSize4 (class	FaceSize4)
	       Specifies the pointsize of the fourth alternative font.

       faceSize5 (class	FaceSize5)
	       Specifies the pointsize of the fifth alternative	font.

       faceSize6 (class	FaceSize6)
	       Specifies the pointsize of the sixth alternative	font.

       font (class Font)
	       Specifies the name of the normal	font.  The default is "fixed".

	       See the discussion of the locale	resource, which	describes  how
	       this font may be	overridden.

	       NOTE: some resource files use patterns such as

		   *font: fixed

	       which are overly	broad, affecting both

		   xterm.vt100.font

	       and

		   xterm.vt100.utf8Fonts.font

	       which is	probably not what you intended.

       fastScroll (class FastScroll)
	       Modifies	 the effect of jump scroll (jumpScroll)	by suppressing
	       screen refreshes	for the	special	case when output to the	screen
	       has  completely shifted the contents off-screen.	 For instance,
	       cat'ing a large file to the screen does this.

       font1 (class Font1)
	       Specifies the name of the first alternative font, corresponding
	       to "Unreadable" in the standard menu.

       font2 (class Font2)
	       Specifies  the name of the second alternative font, correspond-
	       ing to "Tiny" in	the standard menu.

       font3 (class Font3)
	       Specifies the name of the third alternative font, corresponding
	       to "Small" in the standard menu.

       font4 (class Font4)
	       Specifies  the name of the fourth alternative font, correspond-
	       ing to "Medium" in the standard menu.

       font5 (class Font5)
	       Specifies the name of the fifth alternative font, corresponding
	       to "Large" in the standard menu.

       font6 (class Font6)
	       Specifies the name of the sixth alternative font, corresponding
	       to "Huge" in the	standard menu.

       fontDoublesize (class FontDoublesize)
	       Specifies whether xterm should attempt to use font  scaling  to
	       draw  double-sized  characters.	Some older font	servers	cannot
	       do this properly, will return misleading	font metrics.  The de-
	       fault is	"true".	 If disabled, xterm will simulate double-sized
	       characters by drawing normal  characters	 with  spaces  between
	       them.

       fontWarnings (class FontWarnings)
	       Specify	whether	 xterm	should	report an error	if it fails to
	       load a font:

	       0    Never report an error (though the X	libraries may).

	       1    Report an error if the font	name was given as  a  resource
		    setting.

	       2    Always report an error on failure to load a	font.

	       The default is "1".

       forceBoxChars (class ForceBoxChars)
	       Specifies whether xterm should assume the normal	and bold fonts
	       have VT100 line-drawing characters:

	       o   The fixed-pitch ISO-8859-*-encoded fonts used by xterm nor-
		   mally  have	the  VT100  line-drawing glyphs	in cells 1-31.
		   Other fixed-pitch fonts may be more	attractive,  but  lack
		   these glyphs.

	       o   When	 using	an ISO-10646-1 font and	the wideChars resource
		   is true, xterm uses the  Unicode  glyphs  which  match  the
		   VT100 line-drawing glyphs.

	       If  "false",  xterm  checks  for	missing	glyphs in the font and
	       makes line-drawing characters directly as needed.   If  "true",
	       xterm  assumes the font does not	contain	the line-drawing char-
	       acters, and draws them directly.	 The default is	"false".

       forcePackedFont (class ForcePackedFont)
	       Specifies whether xterm should use the maximum or minimum glyph
	       width  when  displaying	using  a bitmap	font.  Use the maximum
	       width to	help with proportional fonts.  The default is  "true",
	       denoting	the minimum width.

       foreground (class Foreground)
	       Specifies  the  color to	use for	displaying text	in the window.
	       Setting the class name instead of the instance name is an  easy
	       way  to	have everything	that would normally appear in the text
	       color change color.  The	default	is "XtDefaultForeground".

       formatOtherKeys (class FormatOtherKeys)
	       Overrides the format of the escape sequence used	to report mod-
	       ified keys with the modifyOtherKeys resource.

	       0  send	modified  keys	as parameters for function-key 27 (de-
		  fault).

	       1  send modified	keys as	parameters for CSI u.

       freeBoldBox (class FreeBoldBox)
	       Specifies whether xterm should assume the  bounding  boxes  for
	       normal  and  bold fonts are compatible.	If "false", xterm com-
	       pares them and will reject choices of bold fonts	 that  do  not
	       match  the  size	 of  the normal	font.  The default is "false",
	       which means that	the comparison is performed.

       geometry	(class Geometry)
	       Specifies the preferred size and	position of the	VT102  window.
	       There is	no default for this resource.

       highlightColor (class HighlightColor)
	       Specifies  the  color  to  use  for  the	background of selected
	       (highlighted) text.  If not specified (i.e., matching  the  de-
	       fault  foreground),  reverse  video  is	used.	The default is
	       "XtDefaultForeground".

       highlightColorMode (class HighlightColorMode)
	       Specifies whether xterm should use highlightTextColor and high-
	       lightColor  to override the reversed foreground/background col-
	       ors in a	selection.  The	default	is  unspecified:  at  startup,
	       xterm checks if those resources are set to something other than
	       the default foreground and background colors.  Setting this re-
	       source disables the check.

	       The  following  table shows the interaction of the highlighting
	       resources, abbreviated as shown to fit in this page:

	       HCM
		  highlightColorMode

	       HR highlightReverse

	       HBG
		  highlightColor

	       HFG
		  highlightTextColor

	       HCM	 HR	 HBG	   HFG	     Highlight
	       ------------------------------------------------------
	       false	 false	 default   default   bg/fg
	       false	 false	 default   set	     bg/fg
	       false	 false	 set	   default   fg/HBG
	       false	 false	 set	   set	     fg/HBG
	       ------------------------------------------------------
	       false	 true	 default   default   bg/fg
	       false	 true	 default   set	     bg/fg
	       false	 true	 set	   default   fg/HBG
	       false	 true	 set	   set	     fg/HBG
	       ------------------------------------------------------
	       true	 false	 default   default   bg/fg
	       true	 false	 default   set	     HFG/fg
	       true	 false	 set	   default   bg/HBG
	       true	 false	 set	   set	     HFG/HBG
	       ------------------------------------------------------
	       true	 true	 default   default   fg/fg (useless)
	       true	 true	 default   set	     HFG/fg
	       true	 true	 set	   default   fg/HBG
	       true	 true	 set	   set	     HFG/HBG
	       ------------------------------------------------------
	       default	 false	 default   default   bg/fg
	       default	 false	 default   set	     bg/fg
	       default	 false	 set	   default   fg/HBG
	       default	 false	 set	   set	     HFG/HBG
	       ------------------------------------------------------
	       default	 true	 default   default   bg/fg
	       default	 true	 default   set	     bg/fg
	       default	 true	 set	   default   fg/HBG
	       default	 true	 set	   set	     HFG/HBG
	       ------------------------------------------------------

       highlightReverse	(class HighlightReverse)
	       Specifies whether xterm should reverse the selection foreground
	       and  background	colors	when selecting text with reverse-video
	       attribute.  This	applies	only to	the highlightColor  and	 high-
	       lightTextColor  resources,  e.g.,  to match the color scheme of
	       xwsh.  If "true", xterm reverses	the colors, If "false",	 xterm
	       does not	reverse	colors,	The default is "true".

       highlightSelection (class HighlightSelection)
	       If  "false",  selecting with the	mouse highlights all positions
	       on the screen between the beginning of the  selection  and  the
	       current	position.   If "true", xterm highlights	only the posi-
	       tions that contain text that can	be selected.  The  default  is
	       "false".

	       Depending  on  the  way	your applications write	to the screen,
	       there may be trailing blanks on a line.	Xterm stores  data  as
	       it is shown on the screen.  Erasing the display changes the in-
	       ternal state of each cell so it is not considered a  blank  for
	       the  purpose of selection.  Blanks written since	the last erase
	       are selectable.	If you do not wish to have trailing blanks  in
	       a selection, use	the trimSelection resource.

       highlightTextColor (class HighlightTextColor)
	       Specifies  the  color  to  use  for  the	foreground of selected
	       (highlighted) text.  If not specified (i.e., matching  the  de-
	       fault  background),  reverse  video  is	used.	The default is
	       "XtDefaultBackground".

       hpLowerleftBugCompat (class HpLowerleftBugCompat)
	       Specifies whether to work around	a bug in HP's xdb,  which  ig-
	       nores  termcap and always sends ESC F to	move to	the lower left
	       corner.	"true" causes xterm to interpret ESC F as a request to
	       move  to	 the  lower left corner	of the screen.	The default is
	       "false".

       i18nSelections (class I18nSelections)
	       If false, xterm will not	request	the targets  COMPOUND_TEXT  or
	       TEXT.   The  default is "true". It may be set to	false in order
	       to work around ICCCM violations by other	X clients.

       iconBorderColor (class BorderColor)
	       Specifies the border color for the active icon window  if  this
	       feature	is  compiled into xterm.  Not all window managers will
	       make the	icon border visible.

       iconBorderWidth (class BorderWidth)
	       Specifies the border width for the active icon window  if  this
	       feature	is  compiled into xterm.  The default is "2".  Not all
	       window managers will make the border visible.

       iconFont	(class IconFont)
	       Specifies the font for the miniature  active  icon  window,  if
	       this feature is compiled	into xterm.  The default is "nil2".

       initialFont (class InitialFont)
	       Specifies  which	 of  the VT100 fonts to	use initially.	Values
	       are the same as for the set-vt-font  action.   The  default  is
	       "d", i.e., "default".

       inputMethod (class XtCInputMethod)
	       Tells xterm which type of input method to use.  There is	no de-
	       fault method.

       internalBorder (class BorderWidth)
	       Specifies the number of pixels between the characters  and  the
	       window border.  The default is "2".

       italicULMode (class ColorAttrMode)
	       Specifies  whether  characters  with  the  underline  attribute
	       should be displayed in an italic	font or	as underlined  charac-
	       ters.  It is implemented	only for TrueType fonts.

       jumpScroll (class JumpScroll)
	       Specifies whether or not	jump scroll should be used.  This cor-
	       responds	to the VT102 DECSCLM private  mode.   The  default  is
	       "true".	See fastScroll for a variation.

       keepSelection (class KeepSelection)
	       Specifies  whether xterm	will keep the selection	even after the
	       selected	area was touched by some output	to the terminal.   The
	       default is "true".

       keyboardDialect (class KeyboardDialect)
	       Specifies  the initial keyboard dialect,	as well	as the default
	       value when the terminal is reset.  The value given is the  same
	       as  the	final  character in the	control	sequences which	change
	       character sets.	The default is "B", which  corresponds	to  US
	       ASCII.

       nameKeymap (class NameKeymap)
	       See the discussion of the keymap() action.

       limitResize (class LimitResize)
	       Limits  resizing	 of the	screen via control sequence to a given
	       multiple	of the display dimensions.  The	default	is "1".

       locale (class Locale)
	       Specifies how to	use luit, an encoding converter	between	 UTF-8
	       and  locale  encodings.	The resource value (ignoring case) may
	       be:

	       true
		   xterm  will	use  the  encoding  specified  by  the	users'
		   LC_CTYPE locale (i.e., LC_ALL, LC_CTYPE, or LANG variables)
		   as far as possible.	This is	realized  by  always  enabling
		   UTF-8 mode and invoking luit	in non-UTF-8 locales.

	       medium
		   xterm  will	follow	users' LC_CTYPE	locale only for	UTF-8,
		   east	Asian, and Thai	locales, where the encodings were  not
		   supported  by  conventional	8bit mode with changing	fonts.
		   For other locales, xterm will use conventional 8bit mode.

	       checkfont
		   If mini-luit	is compiled-in,	xterm will check if a  Unicode
		   font	has been specified.  If	so, it checks if the character
		   encoding for	 the  current  locale  is  POSIX,  Latin-1  or
		   Latin-9, uses the appropriate mapping to support those with
		   the Unicode font.  For other	encodings, xterm assumes  that
		   UTF-8 encoding is required.

	       false
		   xterm will use conventional 8bit mode or UTF-8 mode accord-
		   ing to utf8 resource	or -u8 option.

	       Any other value,	e.g., "UTF-8" or "ISO8859-2", is assumed to be
	       an encoding name; luit will be invoked to support the encoding.
	       The actual list of supported encodings depends  on  luit.   The
	       default is "medium".

	       Regardless of your locale and encoding, you need	an ISO-10646-1
	       font to display the result.  Your configuration may not include
	       this  font,  or	locale-support by xterm	may not	be needed.  At
	       startup,	xterm uses a  mechanism	 equivalent  to	 the  load-vt-
	       fonts(utf8Fonts,	Utf8Fonts)  action  to	load  font name	subre-
	       sources of the VT100 widget.  That is, resource	patterns  such
	       as  "*vt100.utf8Fonts.font"  will  be  loaded, and (if this re-
	       source is enabled), override the	normal fonts.	If  no	subre-
	       sources	are  found,  the  normal  fonts	such as	"*vt100.font",
	       etc., are used.	The resource files distributed with xterm  use
	       ISO-10646-1 fonts, but do not rely on them unless you are using
	       the locale mechanism.

       localeFilter (class LocaleFilter)
	       Specifies the file name for the encoding	converter from/to  lo-
	       cale  encodings	and UTF-8 which	is used	with the -lc option or
	       locale resource.	 The help message shown	by "xterm -help" lists
	       the default value, which	depends	on your	system configuration.

	       If the encoding converter requires command-line parameters, you
	       can add those after the command,	e.g.,

		   *localeFilter: xterm-filter -p

	       Alternatively, you may  put  those  parameter  within  a	 shell
	       script to execute the converter,	and set	this resource to point
	       to the shell script.

	       When using a locale-filter, e.g., with the -e  option,  or  the
	       shell,  xterm  first tries passing control via that filter.  If
	       it fails, xterm will retry without  the	locale-filter.	 Xterm
	       warns about the failure before retrying.

       loginShell (class LoginShell)
	       Specifies  whether  or  not  the	 shell to be run in the	window
	       should be started as a login shell.  The	default	is "false".

       marginBell (class MarginBell)
	       Specifies whether or not	the bell should	be rung	when the  user
	       types near the right margin.  The default is "false".

       metaSendsEscape (class MetaSendsEscape)
	       If  "true", Meta	characters (a character	combined with the Meta
	       modifier	key) are converted into	a two-character	sequence  with
	       the  character itself preceded by ESC.  This applies as well to
	       function	key control sequences, unless xterm sees that Meta  is
	       used in your key	translations.  If "false", Meta	characters in-
	       put from	the keyboard are handled according to the  eightBitIn-
	       put resource.  The default is "False".

       mkSamplePass (class MkSamplePass)
	       If  mkSampleSize	 is  nonzero,  and  mkWidth (and cjkWidth) are
	       false, on startup xterm compares	its  built-in  tables  to  the
	       system's	wide character width data to decide if it will use the
	       system's	data.  It tests	the first mkSampleSize character  val-
	       ues,  and  allows up to mkSamplePass mismatches before the test
	       fails.  The default (for	the allowed number of  mismatches)  is
	       256.

       mkSampleSize (class MkSampleSize)
	       With  mkSamplePass, this	specifies a startup test used for ini-
	       tializing wide character	width calculations.  The default (num-
	       ber of characters to check) is 1024.

       mkWidth (class MkWidth)
	       Specifies  whether  xterm  should use a built-in	version	of the
	       wide character width calculation.  See also  the	 cjkWidth  re-
	       source which can	override this.	The default is "false".

	       Here  is	a summary of the resources which control the choice of
	       wide character width calculation:

	       cjkWidth	  mkWidth   Action
	       ---------------------------------------------------------------
	       false	  false	    use	system tables subject to mkSamplePass
	       false	  true	    use	built-in tables
	       true	  false	    use	built-in CJK tables
	       true	  true	    use	built-in CJK tables

       modifyCursorKeys	(class ModifyCursorKeys)
	       Tells how to handle the special case  where  Control-,  Shift-,
	       Alt-  or	 Meta-modifiers	are used to add	a parameter to the es-
	       cape sequence returned by a cursor-key.	The default is "2":

	       -1   disables the feature.

	       0    uses the old/obsolete behavior.

	       1    prefixes modified sequences	with CSI.

	       2    forces the modifier	to be the second parameter if it would
		    otherwise be the first.

	       3    marks the sequence with a ">" to hint that it is private.

       modifyFunctionKeys (class ModifyFunctionKeys)
	       Tells  how  to  handle the special case where Control-, Shift-,
	       Alt- or Meta-modifiers are used to add a	parameter to  the  es-
	       cape  sequence  returned	by a (numbered)	function-key.  The de-
	       fault is	"2".  The resource values are  similar	to  modifyCur-
	       sorKeys:

	       -1   permits  the  user	to use shift- and control-modifiers to
		    construct function-key strings using the  normal  encoding
		    scheme.

	       0    uses the old/obsolete behavior.

	       1    prefixes modified sequences	with CSI.

	       2    forces the modifier	to be the second parameter if it would
		    otherwise be the first.

	       3    marks the sequence with a ">" to hint that it is private.

	       If modifyFunctionKeys is	zero, xterm uses Control-  and	Shift-
	       modifiers to allow the user to construct	numbered function-keys
	       beyond the set provided by the keyboard:

	       Control
		    adds the value given by the	ctrlFKeys resource.

	       Shift
		    adds twice the value given by the ctrlFKeys	resource.

	       Control/Shift
		    adds three times the value	given  by  the	ctrlFKeys  re-
		    source.

       modifyKeyboard (class ModifyKeyboard)
	       Normally	xterm makes a special case regarding modifiers (shift,
	       control,	etc.)  to handle special keyboard layouts (legacy  and
	       vt220).	 This  is done to provide compatible keyboards for DEC
	       VT220 and related terminals that	 implement  user-defined  keys
	       (UDK).

	       The  bits of the	resource value selectively enable modification
	       of the given category when these	keyboards are  selected.   The
	       default is "0":

	       0    The	legacy/vt220 keyboards interpret only the Control-mod-
		    ifier when	constructing  numbered	function-keys.	 Other
		    special keys are not modified.

	       1    allows modification	of the numeric keypad

	       2    allows modification	of the editing keypad

	       4    allows  modification  of  function-keys,  overrides	use of
		    Shift-modifier for UDK.

	       8    allows modification	of other special keys

       modifyOtherKeys (class ModifyOtherKeys)
	       Like modifyCursorKeys, tells xterm to construct an  escape  se-
	       quence  for other keys (such as "2") when modified by Control-,
	       Alt- or Meta-modifiers.	This feature does not apply  to	 func-
	       tion  keys  and	well-defined  keys  such as ESC	or the control
	       keys.  The default is "0":

	       0    disables this feature.

	       1    enables this feature for keys except for those with	 well-
		    known behavior, e.g., Tab, Backarrow and some special con-
		    trol character cases, e.g.,	Control-Space to make a	NUL.

	       2    enables this feature for  keys  including  the  exceptions
		    listed.

       multiClickTime (class MultiClickTime)
	       Specifies  the maximum time in milliseconds between multi-click
	       select events.  The default is "250" milliseconds.

       multiScroll (class MultiScroll)
	       Specifies  whether  or  not  scrolling  should  be  done	 asyn-
	       chronously.  The	default	is "false".

       nMarginBell (class Column)
	       Specifies  the  number  of  characters from the right margin at
	       which the margin	bell should  be	 rung,	when  enabled  by  the
	       marginBell resource.  The default is "10".

       numLock (class NumLock)
	       If  "true",  xterm checks if NumLock is used as a modifier (see
	       xmodmap(1)).  If	so, this modifier  is  used  to	 simplify  the
	       logic when implementing special NumLock for the sunKeyboard re-
	       source.	Also (when sunKeyboard is  false),  similar  logic  is
	       used  to	 find  the modifier associated with the	left and right
	       Alt keys.  The default is "true".

       oldXtermFKeys (class OldXtermFKeys)
	       If "true", xterm	will use old-style control sequences for func-
	       tion  keys F1 to	F4, for	compatibility with X Consortium	xterm.
	       Otherwise, it uses the VT100-style codes	for PF1	to  PF4.   The
	       default is "false".

       on2Clicks (class	On2Clicks)

       on3Clicks (class	On3Clicks)

       on4Clicks (class	On4Clicks)

       on5Clicks (class	On5Clicks)
	       Specify	selection  behavior  in	 response  to  multiple	 mouse
	       clicks.	A single mouse click  is  always  interpreted  as  de-
	       scribed in the SELECTION	section	(see POINTER USAGE).  Multiple
	       mouse clicks (using the button which activates the select-start
	       action)	are  interpreted  according  to	the resource values of
	       on2Clicks, etc.	The resource value can be one of these:

	       word
		  Select a "word" as determined	 by  the  charClass  resource.
		  See the CHARACTER CLASSES section.

	       line
		  Select a line	(counting wrapping).

	       group
		  Select  a  group of adjacent lines (counting wrapping).  The
		  selection stops on a blank line, and does not	extend outside
		  the current page.

	       page
		  Select all visible lines, i.e., the page.

	       all
		  Select all lines, i.e., including the	saved lines.

	       regex
		  Select  a  "word"  as	 determined  by	the regular expression
		  which	follows	in the resource	value.

	       none
		  No selection action is associated with this resource.	 xterm
		  interprets  it as the	end of the list.  For example, you may
		  use it to disable triple (and	higher)	 clicking  by  setting
		  on3Clicks to "none".

	       The  default  values for	on2Clicks and on3Clicks	are "word" and
	       "line", respectively.  There is no default value	for  on4Clicks
	       or  on5Clicks, making those inactive.  On startup, xterm	deter-
	       mines the maximum number	of clicks by  the  onXClicks  resource
	       values which are	set.

       openIm (class XtCOpenIm)
	       Tells  xterm  whether to	open the input method at startup.  The
	       default is "true".

       pointerColor (class PointerColor)
	       Specifies the foreground	color of the pointer.  The default  is
	       "XtDefaultForeground".

       pointerColorBackground (class PointerColorBackground)
	       Specifies  the background color of the pointer.	The default is
	       "XtDefaultBackground".

       pointerMode (class PointerMode)
	       Specifies when the pointer may be hidden	as the user types.  It
	       will  be	redisplayed if the user	moves the mouse, or clicks one
	       of its buttons.

	       0  never

	       1  the application running in xterm  has	 not  activated	 mouse
		  mode.	 This is the default.

	       2  always.

       pointerShape (class Cursor)
	       Specifies the name of the shape of the pointer.	The default is
	       "xterm".

       popOnBell (class	PopOnBell)
	       Specifies whether the window would be raised when Control-G  is
	       received.  The default is "false".

	       If  the	window is iconified, this has no effect.  However, the
	       zIconBeep resource provides you with the	ability	to  see	 which
	       iconified windows have sounded a	bell.

       precompose (class XtCPrecompose)
	       Tells xterm whether to precompose UTF-8 data into Normalization
	       Form C, which combines commonly-used accents onto base  charac-
	       ters.   If  it does not do this,	accents	are left as separatate
	       characters.  The	default	is "true".

       preeditType (class XtCPreeditType)
	       Tells xterm which types of preedit  (preconversion)  string  to
	       display.	 The default is	"OverTheSpot,Root".

       printAttributes (class PrintAttributes)
	       Specifies  whether  to  print graphic attributes	along with the
	       text.  A	real DEC VTxxx	terminal  will	print  the  underline,
	       highlighting codes but your printer may not handle these.

	       o   "0" disables	the attributes.

	       o   "1"	prints	the normal set of attributes (bold, underline,
		   inverse and blink) as VT100-style control sequences.

	       o   "2" prints ANSI color attributes as well.

	       The default is "1".

       printFileImmediate (PrintFileImmediate)
	       When the	print-immediate	action is invoked,  xterm  prints  the
	       screen  contents	 directly to a file.  Set this resource	to the
	       prefix of the filename (a timestamp will	be appended to the ac-
	       tual name).

	       The  default  is	 an  empty string, i.e., "", However, when the
	       print-immediate action is invoked, if the string	is empty, then
	       "XTerm" is used.

       printFileOnXError (PrintFileOnXError)
	       If xterm	exits with an X	error, e.g., your connection is	broken
	       when the	server crashes,	it can be told to write	 the  contents
	       of  the	screen to a file.  To enable the feature, set this re-
	       source to the prefix of the filename (a timestamp will  be  ap-
	       pended to the actual name).

	       The  default  is	an empty string, i.e., "", which disables this
	       feature.	 However, when the print-on-error action  is  invoked,
	       if the string is	empty, then "XTermError" is used.

	       These error codes are handled: ERROR_XERROR, ERROR_XIOERROR and
	       ERROR_ICEERROR.

       printModeImmediate (PrintModeImmediate)
	       When the	print-immediate	action is invoked,  xterm  prints  the
	       screen  contents	directly to a file.  You can use the printMod-
	       eImmediate resource to tell it to use escape sequences  to  re-
	       construct  the video attributes and colors.  This uses the same
	       values as the printAttributes resource.	The default is "0".

       printModeOnXError (PrintModeOnXError)
	       Xterm  implements  the  printFileOnXError  feature  using   the
	       printer	feature,  although the output is written directly to a
	       file.  You can use the printModeOnXError	resource to tell it to
	       use  escape  sequences  to reconstruct the video	attributes and
	       colors.	This uses the same values as the  printAttributes  re-
	       source.	The default is "0".

       printOptsImmediate (PrintOptsImmediate)
	       Specify	the  range of text which is printed to a file when the
	       print-immediately action	is invoked.

	       o   If zero (0),	then this selects the current (visible screen)
		   plus	the saved lines, except	if the alternate screen	is be-
		   ing used.  In that case, only the alternate screen  is  se-
		   lectd.

	       o   If nonzero, the bits	of this	resource value (checked	in de-
		   scending order) select the range:

		   8  selects the saved	lines.

		   4  selects the alternate screen.

		   2  selects the normal screen.

		   1  selects the current screen, which	can be either the nor-
		      mal or alternate screen.

	       The  default  is	 "9", which selects the	current	visible	screen
	       plus saved lines, with  no  special  case  for  the  alternated
	       screen.

       printOptsOnXError (PrintOptsOnXError)
	       Specify	the  range of text which is printed to a file when the
	       print-on-error action is	invoked.  The resource value is	inter-
	       preted the same as in printOptsImmediate.

	       The  default  is	 "9", which selects the	current	visible	screen
	       plus saved lines, with  no  special  case  for  the  alternated
	       screen.

       printerAutoClose	(class PrinterAutoClose)
	       If  "true",  xterm will close the printer (a pipe) when the ap-
	       plication switches the printer offline with a Media  Copy  com-
	       mand.  The default is "false".

       printerCommand (class PrinterCommand)
	       Specifies  a shell command to which xterm will open a pipe when
	       the first MC (Media Copy) command is initiated.	The default is
	       an  empty  string, i.e.,	"".  If	the resource value is given as
	       an empty	string,	the printer is disabled.

       printerControlMode (class PrinterControlMode)
	       Specifies the printer control mode.  A  "1"  selects  autoprint
	       mode,  which  causes xterm to print a line from the screen when
	       you move	the cursor off that line with a	line feed,  form  feed
	       or  vertical  tab  character, or	an autowrap occurs.  Autoprint
	       mode is overridden by printer controller	mode  (a  "2"),	 which
	       causes  all  of	the output to be directed to the printer.  The
	       default is "0".

       printerExtent (class PrinterExtent)
	       Controls	whether	a print	page function will  print  the	entire
	       page  (true), or	only the the portion within the	scrolling mar-
	       gins (false).  The default is "false".

       printerFormFeed (class PrinterFormFeed)
	       Controls	whether	a form feed is sent to the printer at the  end
	       of a print page function.  The default is "false".

       printerNewLine (class PrinterNewLine)
	       Controls	whether	a newline is sent to the printer at the	end of
	       a print page function.  The default is "true".

       privateColorRegisters (class privateColorRegisters)
	       If true,	allocate separate color	registers for each  sixel  de-
	       vice control string, e.g., for DECGCI.  If not true, color reg-
	       isters are allocated only once, when  the  terminal  is	reset.
	       The default is "true".

       quietGrab (class	QuietGrab)
	       Controls	 whether  the  cursor is repainted when	NotifyGrab and
	       NotifyUngrab event types	are received during change  of	focus.
	       The default is "false".

       renderFont (class RenderFont)
	       If  xterm  is built with	the Xft	library, this controls whether
	       the faceName resource is	used.  The default is "default".

	       The resource values are strings,	evaluated  as  booleans	 after
	       startup.

	       false
		    disable the	feature	and use	the normal (bitmap) font.

	       true
		    startup  using the TrueType	font specified by the faceName
		    and	faceSize resource settings.  If	there is no value  for
		    faceName,  disable the feature and use the normal (bitmap)
		    font.

		    After startup, you can still  switch  to/from  the	bitmap
		    font using the "TrueType Fonts" menu entry.

	       default
		    startup  using  the	 normal	 (bitmap) font,	but enable the
		    "TrueType Fonts" menu entry	 to  allow  runtime  switching
		    to/from TrueType fonts.

		    If there is	no faceName resource set, then runtime switch-
		    ing	to TrueType fonts is disabled.	Xterm has  a  separate
		    compiled-in	 value for faceName for	the special case where
		    renderFont is "default".  That is normally "mono".

       resizeGravity (class ResizeGravity)
	       Affects the behavior when the window is resized to be taller or
	       shorter.	  NorthWest specifies that the top line	of text	on the
	       screen stay fixed.  If the window is made  shorter,  lines  are
	       dropped	from  the  bottom; if the window is made taller, blank
	       lines are added at the bottom.  This is compatible with the be-
	       havior  in R4.  SouthWest (the default) specifies that the bot-
	       tom line	of text	on the screen stay fixed.  If  the  window  is
	       made  taller, additional	saved lines will be scrolled down onto
	       the screen; if the  window  is  made  shorter,  lines  will  be
	       scrolled	 off  the  top	of the screen, and the top saved lines
	       will be dropped.

       retryInputMethod	(class XtCRetryInputMethod)
	       Tells xterm how many times to retry, in case  the  input-method
	       server  is  not responding.  This is a different	issue than un-
	       supported preedit type, etc.  You may encounter retries if your
	       X  configuration	 (and its libraries) are missing pieces.  Set-
	       ting this resource to zero ``0''	will cancel the	retrying.  The
	       default is ``3''.

       reverseVideo (class ReverseVideo)
	       Specifies  whether  or  not  reverse video should be simulated.
	       The default is "false".

	       There are several aspects to reverse video in xterm:

	       o   The command-line -rv	option tells the X  libraries  to  re-
		   verse  the  foreground and background colors.  Xterm's com-
		   mand-line options set resource values.  In particular,  the
		   X  Toolkit  sets the	reverseVideo resource when the -rv op-
		   tion	is used.

	       o   If the user has also	used command-line options -fg  or  -bg
		   to set the foreground and background	colors,	xterm does not
		   see these options directly.	Instead, it examines  the  re-
		   source  values to reconstruct the command-line options, and
		   determine which of the colors is the	user's intended	 fore-
		   ground, etc.	 Their actual values are irrelevant to the re-
		   verse video function; some  users  prefer  the  X  defaults
		   (black  text	 on  a	white background), others prefer white
		   text	on a black background.

	       o   After startup, the user  can	 toggle	 the  "Enable  Reverse
		   Video"  menu	 entry.	 This exchanges	the current foreground
		   and background colors of the	VT100 widget, and repaints the
		   screen.  Because of the X resource hierarchy, the reverseV-
		   ideo	resource applies to more than the VT100	widget.

	       Programs	running	in an xterm can	also use control sequences  to
	       enable  the VT100 reverse video mode.  These are	independent of
	       the reverseVideo	resource and the menu entry.  Xterm  exchanges
	       the  current foreground and background colors when drawing text
	       affected	by these control sequences.

	       Other control sequences can alter the foreground	and background
	       colors which are	used:

	       o   Programs  can  also use the ANSI color control sequences to
		   set the foreground and background colors.

	       o   Extensions to the ANSI color	controls (such as 16-, 88-  or
		   256-colors) are treated similarly to	the ANSI control.

	       o   Using  other	 control  sequences (the "dynamic colors" fea-
		   ture), a program can	change the foreground  and  background
		   colors.

       reverseWrap (class ReverseWrap)
	       Specifies  whether or not reverse-wraparound should be enabled.
	       This corresponds	to xterm's private mode	45.   The  default  is
	       "false".

       rightScrollBar (class RightScrollBar)
	       Specifies  whether  or not the scrollbar	should be displayed on
	       the right rather	than the left.	The default is "false".

       saveLines (class	SaveLines)
	       Specifies the number of lines to	save beyond  the  top  of  the
	       screen when a scrollbar is turned on.  The default is "64".

       scrollBar (class	ScrollBar)
	       Specifies  whether  or  not  the	scrollbar should be displayed.
	       The default is "false".

       scrollBarBorder (class ScrollBarBorder)
	       Specifies the width of the scrollbar border.  Note that this is
	       drawn to	overlap	the border of the xterm	window.	 Modifying the
	       scrollbar's border affects only the line	between	the VT100 wid-
	       get and the scrollbar.  The default value is 1.

       scrollKey (class	ScrollCond)
	       Specifies  whether  or  not pressing a key should automatically
	       cause the scrollbar to go to the	bottom of  the	scrolling  re-
	       gion.   This corresponds	to xterm's private mode	1011.  The de-
	       fault is	"false".

       scrollLines (class ScrollLines)
	       Specifies the number of lines that the scroll-back and  scroll-
	       forw actions should use as a default.  The default value	is 1.

       scrollTtyOutput (class ScrollCond)
	       Specifies whether or not	output to the terminal should automat-
	       ically cause the	scrollbar to go	to the bottom of the scrolling
	       region.	The default is "true".

       selectToClipboard (class	SelectToClipboard)
	       Tells  xterm whether to use the PRIMARY or CLIPBOARD for	SELECT
	       tokens in the selection mechanism.  The set-select  action  can
	       change this at runtime, allowing	the user to work with programs
	       that handle only	one  of	 these	mechanisms.   The  default  is
	       "false",	which tells it to use PRIMARY.

       shiftFonts (class ShiftFonts)
	       Specifies  whether  to  enable the actions larger-vt-font() and
	       smaller-vt-font(), which	are  normally  bound  to  the  shifted
	       KP_Add and KP_Subtract.	The default is "true".

       showBlinkAsBold (class ShowBlinkAsBold)
	       Tells  xterm  whether  to display text with blink-attribute the
	       same as bold.  If xterm has  not	 been  configured  to  support
	       blinking	 text,	the  default  is  "true", which	corresponds to
	       older versions of xterm,	otherwise the default is "false".

       showMissingGlyphs (class	ShowMissingGlyphs)
	       Tells xterm whether to display a	box outlining places  where  a
	       character  has been used	that the font does not represent.  The
	       default is "false".

       showWrapMarks (class ShowWrapMarks)
	       For debugging xterm and applications that  may  manipulate  the
	       wrapped-line  flag  by writing text at the right	margin,	show a
	       mark on the right inner-border of the window.  The  mark	 shows
	       which lines have	the flag set.

       signalInhibit (class SignalInhibit)
	       Specifies whether or not	the entries in the "Main Options" menu
	       for sending signals to xterm should be disallowed.  The default
	       is "false".

       sixelScrolling (class SixelScrolling)
	       If  true,  graphics  scroll  up	one line at a time when	sixels
	       would be	written	past the bottom	line on	the window.   The  de-
	       fault is	"false".

       tekGeometry (class Geometry)
	       Specifies the preferred size and	position of the	Tektronix win-
	       dow.  There is no default for this resource.

       tekInhibit (class TekInhibit)
	       Specifies whether or not	the escape sequence to enter Tektronix
	       mode should be ignored.	The default is "false".

       tekSmall	(class TekSmall)
	       Specifies whether or not	the Tektronix mode window should start
	       in its smallest size if no explicit geometry is given.  This is
	       useful  when running xterm on displays with small screens.  The
	       default is "false".

       tekStartup (class TekStartup)
	       Specifies whether or not	xterm should  start  up	 in  Tektronix
	       mode.  The default is "false".

       tiXtraScroll (class TiXtraScroll)
	       Specifies  whether  xterm should	scroll to a new	page when pro-
	       cessing the ti termcap entry, i.e., the private modes 47,  1047
	       or  1049.  This is only in effect if titeInhibit	is "true", be-
	       cause the intent	of this	option is to provide a picture of  the
	       full-screen  application's  display  on	the scrollback without
	       wiping out the text that	would be shown before the  application
	       was initialized.	 The default for this resource is "false".

       titeInhibit (class TiteInhibit)
	       Specifies  whether or not xterm should remove ti	and te termcap
	       entries (used to	switch between alternate screens on startup of
	       many  screen-oriented  programs)	 from  the TERMCAP string.  If
	       set, xterm also ignores the escape sequence to  switch  to  the
	       alternate  screen.  Xterm supports terminfo in a	different way,
	       supporting composite control sequences (also known  as  private
	       modes)  1047,  1048  and	1049 which have	the same effect	as the
	       original	47 control sequence.  The default for this resource is
	       "false".

       titleModes (class TitleModes)
	       Tells xterm whether to accept or	return window- and icon-labels
	       in ISO-8859-1 (the default) or UTF-8.  Either can be encoded in
	       hexadecimal.  The default for this resource is "0".

	       Each bit	(bit "0" is 1, bit "1" is 2, etc.)  corresponds	to one
	       of the parameters set by	the title modes	control	sequence:

	       0    Set	window/icon labels using hexadecimal

	       1    Query window/icon labels using hexadecimal

	       2    Set	window/icon labels using  UTF-8	 (overrides  utf8Title
		    resource).

	       3    Query window/icon labels using UTF-8

       translations (class Translations)
	       Specifies  the  key  and	button bindings	for menus, selections,
	       "programmed strings", etc.  The	translations  resource,	 which
	       provides	much of	xterm's	configurability, is a feature of the X
	       Toolkit Intrinsics library (Xt).	 See the ACTIONS section.

       trimSelection (class TrimSelection)
	       If you set highlightSelection, you can see the  text  which  is
	       selected,  including  any trailing spaces.  Clearing the	screen
	       (or a line) resets it to	a state	containing  no	spaces.	  Some
	       lines  may  contain  trailing spaces when an application	writes
	       them to the screen.  However, you may not wish to  paste	 lines
	       with  trailing  spaces.	 If  this resource is true, xterm will
	       trim trailing spaces from text which is selected.  It does  not
	       affect  spaces which result in a	wrapped	line, nor will it trim
	       the trailing newline  from  your	 selection.   The  default  is
	       "false".

       underLine (class	UnderLine)
	       This specifies whether or not text with the underline attribute
	       should be underlined.  It may be	desirable to disable underlin-
	       ing  when color is being	used for the underline attribute.  The
	       default is "true".

       useClipping (class UseClipping)
	       Tell xterm whether to use clipping to keep from producing  dots
	       outside	the text drawing area.	Originally used	to work	around
	       for overstriking	effects, this is also needed to	work with some
	       incorrectly-sized fonts.	 The default is	"true".

       utf8 (class Utf8)
	       This  specifies	whether	 xterm will run	in UTF-8 mode.	If you
	       set this	resource, xterm	also sets the wideChars	resource as  a
	       side-effect.  The resource can be set via the menu entry	"UTF-8
	       Encoding".  The default is "default".

	       Xterm accepts either a keyword (ignoring	case)  or  the	number
	       shown in	parentheses:

	       false (0)
		  UTF-8	 mode  is  initially off.  The command-line option +u8
		  sets the resource to this value.  Escape sequences for turn-
		  ing UTF-8 mode on/off	are allowed.

	       true (1)
		  UTF-8	 mode  is  initially on.  Escape sequences for turning
		  UTF-8	mode on/off are	allowed.

	       always (2)
		  The command-line option -u8 sets the resource	to this	value.
		  Escape sequences for turning UTF-8 mode on/off are ignored.

	       default (3)
		  This	is  the	 default value of the resource.	 It is changed
		  during initialization	depending on whether  the  locale  re-
		  source  was set, to false (0)	or always (2).	See the	locale
		  resource for additional discussion of	non-UTF-8 locales.

	       If you want to set the value of utf8,  it  should  be  in  this
	       range.  Other nonzero values are	treated	the same as "1", i.e.,
	       UTF-8 mode is initially on, and escape  sequences  for  turning
	       UTF-8 mode on/off are allowed.

       utf8Fonts (class	Utf8Fonts)
	       See  the	 discussion  of	 the  locale resource.	This specifies
	       whether xterm will use UTF-8 fonts specified via	resource  pat-
	       terns  such  as	"*vt100.utf8Fonts.font"	or normal (ISO-8859-1)
	       fonts via patterns such as "*vt100.font".  The resource can  be
	       set  via	 the  menu  entry  "UTF-8 Fonts".  The default is "de-
	       fault".

	       Xterm accepts either a keyword (ignoring	case)  or  the	number
	       shown in	parentheses:

	       false (0)
		      Use  the	ISO-8859-1  fonts.  The	menu entry is enabled,
		      allowing the choice of fonts to be changed at runtime.

	       true (1)
		      Use the UTF-8 fonts.  The	menu entry is enabled,	allow-
		      ing the choice of	fonts to be changed at runtime.

	       always (2)
		      Always use the UTF-8 fonts.  This	also disables the menu
		      entry.

	       default (3)
		      At startup, the resource is set to true  or  false,  ac-
		      cording to the effective value of	the utf8 resource.

       utf8Latin1 (class Utf8Latin1)
	       If true,	allow an ISO-8859-1 normal font	to be combined with an
	       ISO-10646-1 font	if the latter is given via the -fw  option  or
	       its corresponding resource value.  The default is "false".

       utf8SelectTypes (class Utf8SelectTypes)
	       Override	  xterm's  default  selection  target  list  (see  SE-
	       LECT/PASTE) for selections in wide-character (UTF-8) mode.  The
	       default	is  an empty string, i.e., "", which does not override
	       anything.

       utf8Title (class	Utf8Title)
	       Applications can	set xterm's title by  writing  a  control  se-
	       quence.	 Normally this control sequence	follows	the VT220 con-
	       vention,	which encodes the string in ISO-8859-1 and allows  for
	       an 8-bit	string terminator.  If xterm is	started	in a UTF-8 lo-
	       cale, it	translates the ISO-8859-1 string to UTF-8 to work with
	       the X libraries which assume the	string is UTF-8.

	       However,	some users may wish to write a title string encoded in
	       UTF-8.  The window manager is responsible  for  drawing	window
	       titles.	 Some window managers (not all)	support	UTF-8 encoding
	       of window titles.  Set this resource to "true" to  allow	 UTF-8
	       encoded	title strings.	That cancels the translation to	UTF-8,
	       allowing	UTF-8 strings to be displayed as is.

	       This feature is available as a menu entry, since	it is  related
	       to  the	particular  applications you are running within	xterm.
	       You can also use	a control sequence (see	the discussion of "Ti-
	       tle Modes" in the control sequences document), to set an	equiv-
	       alent flag.  The	titleModes resource sets the same value, which
	       overrides this resource.

	       The default is "false".

       veryBoldColors (class VeryBoldColors)
	       Specifies whether to combine video attributes with colors spec-
	       ified by	colorBD, colorBL, colorRV and colorUL.	 The  resource
	       value is	the sum	of values for each attribute:
		 1 for reverse,
		 2 for underline,
		 4 for bold and
		 8 for blink.

	       The default is "0".

       visualBell (class VisualBell)
	       Specifies whether or not	a visible bell (i.e., flashing)	should
	       be used instead of an audible bell when Control-G is  received.
	       The  default  is	 "false",  which tells xterm to	use an audible
	       bell.

       visualBellDelay (class VisualBellDelay)
	       Number of milliseconds to delay when displaying a visual	 bell.
	       Default	is  100.  If set to zero, no visual bell is displayed.
	       This is useful for very slow displays, e.g., an LCD display  on
	       a laptop.

       visualBellLine (class VisualBellLine)
	       Specifies  whether to flash only	the current line when display-
	       ing a visual bell.  rather than flashing	the entire screen: The
	       default	is  "false",  which  tells  xterm  to flash the	entire
	       screen.

       vt100Graphics (class VT100Graphics)
	       This specifies whether xterm will interpret VT100 graphic char-
	       acter  escape  sequences	 while	in UTF-8 mode.	The default is
	       "true", to provide support for various legacy applications.

       wideBoldFont (class WideBoldFont)
	       This option specifies the font to be used for  displaying  bold
	       wide  text.  By default,	it will	attempt	to use a font twice as
	       wide as the font	that will be used to draw bold	text.	If  no
	       double-width  font  is  found, it will improvise, by stretching
	       the bold	font.

       wideChars (class	WideChars)
	       Specifies if xterm should respond  to  control  sequences  that
	       process 16-bit characters.  The default is "false".

       wideFont	(class WideFont)
	       This  option  specifies the font	to be used for displaying wide
	       text.  By default, it will attempt to use a font	twice as  wide
	       as  the font that will be used to draw normal text.  If no dou-
	       ble-width font is found,	it will	improvise, by  stretching  the
	       normal font.

       ximFont (class XimFont)
	       This  option  specifies	the font to be used for	displaying the
	       preedit string in the "OverTheSpot" input method.

	       In "OverTheSpot"	 preedit  type,	 the  preedit  (preconversion)
	       string  is  displayed at	the position of	the cursor.  It	is the
	       XIM server's responsibility to display the preedit string.  The
	       XIM  client  must inform	the XIM	server of the cursor position.
	       For best	results, the preedit string must be displayed  with  a
	       proper  font.   Therefore,  xterm informs the XIM server	of the
	       proper font.  The font is be supplied by	a "fontset", whose de-
	       fault value is "*".  This matches every font, the X library au-
	       tomatically chooses fonts with proper  charsets.	  The  ximFont
	       resource	is provided to override	this default font setting.

   Tek4014 Widget Resources
       The  following  resources  are  specified as part of the	tek4014	widget
       (class  Tek4014).   These   are	 specified   by	  patterns   such   as
       "XTerm.tek4014.NAME":

       font2 (class Font)
	       Specifies font number 2 to use in the Tektronix window.

       font3 (class Font)
	       Specifies font number 3 to use in the Tektronix window.

       fontLarge (class	Font)
	       Specifies the large font	to use in the Tektronix	window.

       fontSmall (class	Font)
	       Specifies the small font	to use in the Tektronix	window.

       ginTerminator (class GinTerminator)
	       Specifies  what character(s) should follow a GIN	report or sta-
	       tus report.  The	possibilities are "none", which	sends no  ter-
	       minating	 characters,  "CRonly",	 which sends CR, and "CR&EOT",
	       which sends both	CR and EOT.  The default is "none".

       height (class Height)
	       Specifies the height of the Tektronix window in pixels.

       initialFont (class InitialFont)
	       Specifies which of the four Tektronix fonts to  use  initially.
	       Values  are  the	 same as for the set-tek-text action.  The de-
	       fault is	"large".

       width (class Width)
	       Specifies the width of the Tektronix window in pixels.

   Menu	Resources
       The resources that may be specified for the various menus are described
       in  the	documentation  for the Athena SimpleMenu widget.  The name and
       classes of the entries in each of the  menus  are  listed  below.   Re-
       sources	named  "lineN"	where  N is a number are separators with class
       SmeLine.

       As with all X resource-based widgets, the labels	mentioned are  custom-
       ary defaults for	the application.

       The Main	Options	menu (widget name mainMenu) has	the following entries:

       toolbar (class SmeBSB)
	       This entry invokes the set-toolbar(toggle) action.

       securekbd (class	SmeBSB)
	       This entry invokes the secure() action.

       allowsends (class SmeBSB)
	       This entry invokes the allow-send-events(toggle)	action.

       redraw (class SmeBSB)
	       This entry invokes the redraw() action.

       logging (class SmeBSB)
	       This entry invokes the logging(toggle) action.

       print-immediate (class SmeBSB)
	       This entry invokes the print-immediate()	action.

       print-on-error (class SmeBSB)
	       This entry invokes the print-on-error() action.

       print (class SmeBSB)
	       This entry invokes the print() action.

       print-redir (class SmeBSB)
	       This entry invokes the print-redir() action.

       8-bit-control (class SmeBSB)
	       This entry invokes the set-8-bit-control(toggle)	action.

       backarrow key (class SmeBSB)
	       This entry invokes the set-backarrow(toggle) action.

       num-lock	(class SmeBSB)
	       This entry invokes the set-num-lock(toggle) action.

       alt-esc (class SmeBSB)
	       This entry invokes the alt-sends-escape(toggle) action.

       meta-esc	(class SmeBSB)
	       This entry invokes the meta-sends-escape(toggle)	action.

       delete-is-del (class SmeBSB)
	       This entry invokes the delete-is-del(toggle) action.

       oldFunctionKeys (class SmeBSB)
	       This entry invokes the old-function-keys(toggle)	action.

       hpFunctionKeys (class SmeBSB)
	       This entry invokes the hp-function-keys(toggle) action.

       scoFunctionKeys (class SmeBSB)
	       This entry invokes the sco-function-keys(toggle)	action.

       sunFunctionKeys (class SmeBSB)
	       This entry invokes the sun-function-keys(toggle)	action.

       sunKeyboard (class SmeBSB)
	       This entry invokes the sunKeyboard(toggle) action.

       suspend (class SmeBSB)
	       This entry invokes the send-signal(tstp)	action on systems that
	       support job control.

       continue	(class SmeBSB)
	       This entry invokes the send-signal(cont)	action on systems that
	       support job control.

       interrupt (class	SmeBSB)
	       This entry invokes the send-signal(int) action.

       hangup (class SmeBSB)
	       This entry invokes the send-signal(hup) action.

       terminate (class	SmeBSB)
	       This entry invokes the send-signal(term)	action.

       kill (class SmeBSB)
	       This entry invokes the send-signal(kill)	action.

       quit (class SmeBSB)
	       This entry invokes the quit() action.

       The VT Options menu (widget name	vtMenu)	has the	following entries:

       scrollbar (class	SmeBSB)
	       This entry invokes the set-scrollbar(toggle) action.

       jumpscroll (class SmeBSB)
	       This entry invokes the set-jumpscroll(toggle) action.

       reversevideo (class SmeBSB)
	       This entry invokes the set-reverse-video(toggle)	action.

       autowrap	(class SmeBSB)
	       This entry invokes the set-autowrap(toggle) action.

       reversewrap (class SmeBSB)
	       This entry invokes the set-reversewrap(toggle) action.

       autolinefeed (class SmeBSB)
	       This entry invokes the set-autolinefeed(toggle) action.

       appcursor (class	SmeBSB)
	       This entry invokes the set-appcursor(toggle) action.

       appkeypad (class	SmeBSB)
	       This entry invokes the set-appkeypad(toggle) action.

       scrollkey (class	SmeBSB)
	       This entry invokes the set-scroll-on-key(toggle)	action.

       scrollttyoutput (class SmeBSB)
	       This entry invokes the set-scroll-on-tty-output(toggle) action.

       allow132	(class SmeBSB)
	       This entry invokes the set-allow132(toggle) action.

       cursesemul (class SmeBSB)
	       This entry invokes the set-cursesemul(toggle) action.

       visualbell (class SmeBSB)
	       This entry invokes the set-visualbell(toggle) action.

       bellIsUrgent (class SmeBSB)
	       This entry invokes the set-bellIsUrgent(toggle) action.

       poponbell (class	SmeBSB)
	       This entry invokes the set-poponbell(toggle) action.

       cursorblink (class SmeBSB)
	       This entry invokes the set-cursorblink(toggle) action.

       titeInhibit (class SmeBSB)
	       This entry invokes the set-titeInhibit(toggle) action.

       activeicon (class SmeBSB)
	       This  entry toggles active icons	on and off if this feature was
	       compiled	into xterm.  It	is enabled only	if xterm  was  started
	       with  the command line option +ai or the	activeIcon resource is
	       set to "true".

       softreset (class	SmeBSB)
	       This entry invokes the soft-reset() action.

       hardreset (class	SmeBSB)
	       This entry invokes the hard-reset() action.

       clearsavedlines (class SmeBSB)
	       This entry invokes the clear-saved-lines() action.

       tekshow (class SmeBSB)
	       This entry invokes the set-visibility(tek,toggle) action.

       tekmode (class SmeBSB)
	       This entry invokes the set-terminal-type(tek) action.

       vthide (class SmeBSB)
	       This entry invokes the set-visibility(vt,off) action.

       altscreen (class	SmeBSB)
	       This entry invokes the set-altscreen(toggle) action.

       sixelScrolling (class SmeBSB)
	       This entry invokes the set-sixel-scrolling(toggle) action.

       The VT Fonts menu (widget name fontMenu)	has the	following entries:

       fontdefault (class SmeBSB)
	       This entry invokes the set-vt-font(d) action, setting the  font
	       using the font (default)	resource, e.g.,	"Default" in the menu.

       font1 (class SmeBSB)
	       This  entry invokes the set-vt-font(1) action, setting the font
	       using the font1 resource, e.g., "Unreadable" in the menu.

       font2 (class SmeBSB)
	       This entry invokes the set-vt-font(2) action, setting the  font
	       using the font2 resource, e.g., "Tiny" in the menu.

       font3 (class SmeBSB)
	       This  entry invokes the set-vt-font(3) action, setting the font
	       using the font3 resource, e.g., "Small" in the menu.

       font4 (class SmeBSB)
	       This entry invokes the set-vt-font(4) action, letting the  font
	       using the font4 resource, e.g., "Medium"	in the menu.

       font5 (class SmeBSB)
	       This  entry invokes the set-vt-font(5) action, letting the font
	       using the font5 resource, e.g., "Large" in the menu.

       font6 (class SmeBSB)
	       This entry invokes the set-vt-font(6) action, letting the  font
	       using the font6 resource, e.g., "Huge" in the menu.

       fontescape (class SmeBSB)
	       This entry invokes the set-vt-font(e) action.

       fontsel (class SmeBSB)
	       This entry invokes the set-vt-font(s) action.

       font-linedrawing	(class SmeBSB)
	       This entry invokes the set-font-linedrawing(s) action.

       font-packed (class SmeBSB)
	       This entry invokes the set-font-packed(s) action.

       font-doublesize (class SmeBSB)
	       This entry invokes the set-font-doublesize(s) action.

       render-font (class SmeBSB)
	       This entry invokes the set-render-font(s) action.

       utf8-mode (class	SmeBSB)
	       This entry invokes the set-utf8-mode(s) action.

       utf8-title (class SmeBSB)
	       This entry invokes the set-utf8-title(s)	action.

       The TEK Options menu (widget name tekMenu) has the following entries:

       tektextlarge (class SmeBSB)
	       This entry invokes the set-tek-text(large) action.

       tektext2	(class SmeBSB)
	       This entry invokes the set-tek-text(2) action.

       tektext3	(class SmeBSB)
	       This entry invokes the set-tek-text(3) action.

       tektextsmall (class SmeBSB)
	       This entry invokes the set-tek-text(small) action.

       tekpage (class SmeBSB)
	       This entry invokes the tek-page() action.

       tekreset	(class SmeBSB)
	       This entry invokes the tek-reset() action.

       tekcopy (class SmeBSB)
	       This entry invokes the tek-copy() action.

       vtshow (class SmeBSB)
	       This entry invokes the set-visibility(vt,toggle)	action.

       vtmode (class SmeBSB)
	       This entry invokes the set-terminal-type(vt) action.

       tekhide (class SmeBSB)
	       This entry invokes the set-visibility(tek,toggle) action.

   Scrollbar Resources
       The  following  resources  are  useful  when  specified	for the	Athena
       Scrollbar widget:

       thickness (class	Thickness)
	       Specifies the width in pixels of	the scrollbar.

       background (class Background)
	       Specifies the color to use for the background of	the scrollbar.

       foreground (class Foreground)
	       Specifies the color to use for the foreground of	the scrollbar.
	       The  "thumb"  of	the scrollbar is a simple checkerboard pattern
	       alternating pixels for foreground and background	color.

POINTER	USAGE
       Once the	VT102 window is	created, xterm allows you to select  text  and
       copy it within the same or other	windows.

   SELECTION
       The  selection  functions are invoked when the pointer buttons are used
       with no modifiers, and when they	are used with the  "shift"  key.   The
       assignment  of the functions described below to keys and	buttons	may be
       changed through the resource database; see ACTIONS below.

       Pointer button one (usually left) is used to save  text	into  the  cut
       buffer.	 Move  the  cursor to beginning	of the text, and then hold the
       button down while moving	the cursor to the end of the  region  and  re-
       leasing	the  button.  The selected text	is highlighted and is saved in
       the global cut buffer and made the PRIMARY selection when the button is
       released.  Normally (but	see the	discussion of on2Clicks, etc):

       o   Double-clicking selects by words.

       o   Triple-clicking selects by lines.

       o   Quadruple-clicking goes back	to characters, etc.

       Multiple-click is determined by the time	from button up to button down,
       so you can change the selection unit in	the  middle  of	 a  selection.
       Logical words and lines selected	by double- or triple-clicking may wrap
       across more than	one screen line	if lines were wrapped by xterm	itself
       rather  than by the application running in the window.  If the key/but-
       ton bindings specify that an X selection	is  to	be  made,  xterm  will
       leave  the selected text	highlighted for	as long	as it is the selection
       owner.

       Pointer button two (usually middle) "types" (pastes) the	text from  the
       PRIMARY	selection, if any, otherwise from the cut buffer, inserting it
       as keyboard input.

       Pointer button three (usually right)  extends  the  current  selection.
       (Without	loss of	generality, you	can swap "right" and "left" everywhere
       in the rest of this paragraph.)	If pressed while closer	to  the	 right
       edge  of	 the  selection	 than the left,	it extends/contracts the right
       edge of the selection.  If you contract the  selection  past  the  left
       edge  of	 the  selection, xterm assumes you really meant	the left edge,
       restores	the original selection,	then extends/contracts the  left  edge
       of the selection.  Extension starts in the selection unit mode that the
       last selection or extension was performed in; you can multiple-click to
       cycle through them.

       By  cutting  and	pasting	pieces of text without trailing	new lines, you
       can take	text from several places in different windows and form a  com-
       mand  to	 the shell, for	example, or take output	from a program and in-
       sert it into your favorite editor.   Since  cut	buffers	 are  globally
       shared  among  different	 applications, you may regard each as a	"file"
       whose contents you know.	 The terminal emulator and other text programs
       should  be treating it as if it were a text file, i.e., the text	is de-
       limited by new lines.

   SCROLLING
       The scroll region displays the position and amount  of  text  currently
       showing	in the window (highlighted) relative to	the amount of text ac-
       tually saved.  As more text is saved (up	to the maximum), the  size  of
       the highlighted area decreases.

       Clicking	button one with	the pointer in the scroll region moves the ad-
       jacent line to the top of the display window.

       Clicking	button three moves the top line	of the display window down  to
       the pointer position.

       Clicking	 button	 two moves the display to a position in	the saved text
       that corresponds	to the pointer's position in the scrollbar.

   TEKTRONIX POINTER
       Unlike the VT102	window,	the Tektronix window does not allow the	 copy-
       ing  of	text.	It does	allow Tektronix	GIN mode, and in this mode the
       cursor will change from an arrow	to a cross.   Pressing	any  key  will
       send that key and the current coordinate	of the cross cursor.  Pressing
       button one, two,	or three will return the letters "l",  "m",  and  "r",
       respectively.   If  the "shift" key is pressed when a pointer button is
       pressed,	the corresponding upper	case letter is sent.  To distinguish a
       pointer	button	from  a	key, the high bit of the character is set (but
       this is bit is normally stripped	unless the terminal mode is  RAW;  see
       tty(4) for details).

SELECT/PASTE
       X  clients  provide  select and paste support by	responding to requests
       conveyed	by the server.

   PRIMARY
       When configured to use the primary selection, (the default)  xterm  can
       provide	the  selection data in ways which help to retain character en-
       coding information as it	is pasted.

       A user "selects"	text on	xterm, which highlights	the selected text.   A
       subsequent  "paste"  to another client forwards a request to the	client
       owning the selection.  If xterm owns the	primary	 selection,  it	 makes
       the  data available in the form of one or more "selection targets".  If
       it does not own the primary selection, e.g., if it has released	it  or
       another client has asserted ownership, it relies	on cut-buffers to pass
       the data.  But cut-buffers handle only ISO-8859-1  data	(officially  -
       some clients ignore the rules).

   CLIPBOARD
       When  configured	to use the clipboard (see resource selectToClipboard),
       the problem with	persistence  of	 ownership  is	bypassed.   Otherwise,
       there  is  no difference	regarding the data which can be	passed via se-
       lection.

       The PRIMARY token is a standard X feature, documented in	the ICCCM (In-
       ter-Client Communication	Conventions Manual), which states

	      The selection named by the atom PRIMARY is used for all commands
	      that take	only a single argument and is the principal  means  of
	      communication between clients that use the selection mechanism.

       However,	 many applications use CLIPBOARD in imitation of other window-
       ing systems.  The selectToClipboard resource  (and  corresponding  menu
       entry  Select  to  Clipboard) introduce the SELECT token	(known only to
       xterm) which chooses between the	PRIMARY	and CLIPBOARD tokens.

       Without using this feature, one can use workarounds such	as  the	 xclip
       program to show the contents of the X clipboard within an xterm window.

   SELECTION TARGETS
       The different types of data which are passed depend on what the receiv-
       ing client asks for.  These are termed selection	targets.

       When asking for the selection data, xterm tries the following types  in
       this order:

	      UTF8_STRING
		   This	 is  an	XFree86	extension, which denotes that the data
		   is encoded in UTF-8.	 When xterm is built with wide-charac-
		   ter support,	it both	accepts	and provides this type.

	      TEXT the	text is	in the encoding	which corresponds to your cur-
		   rent	locale.

	      COMPOUND_TEXT
		   this	is a format for	multiple character set data,  such  as
		   multi-lingual  text.	  It can store UTF-8 data as a special
		   case.

	      STRING
		   This	is Latin 1 (ISO-8859-1)	data.

       The middle two (TEXT and	COMPOUND_TEXT) are added if xterm  is  config-
       ured with the i18nSelections resource set to "true".

       UTF8_STRING  is	preferred  (therefore  first  in the list) since xterm
       stores text as Unicode data when	running	in wide-character mode,	and no
       translation  is	needed.	 On the	other hand, TEXT and COMPOUND_TEXT may
       require translation.  If	the translation	is incomplete, they  will  in-
       sert  X's  "defaultString" whose	value cannot be	set, and may simply be
       empty.  Xterm's defaultString resource specifies	the string to use  for
       incomplete translations of the UTF8_STRING.

       You can alter the types which xterm tries using the eightBitSelectTypes
       or utf8SelectTypes resources.  For instance, you	might have  some  spe-
       cific  locale  setting which does not use UTF-8 encoding.  The resource
       value is	a comma-separated list of the selection	targets, which consist
       of  the	names  shown.  You can use the special name I18N to denote the
       optional	inclusion of TEXT and COMPOUND_TEXT.  The  names  are  matched
       ignoring	 case,	and  can  be abbreviated.  The default list can	be ex-
       pressed in several ways,	e.g.,

	      UTF8_STRING,I18N,STRING
	      utf8,i18n,string
	      u,i,s

MENUS
       Xterm has four menus, named mainMenu, vtMenu,  fontMenu,	 and  tekMenu.
       Each  menu  pops	 up  under  the	correct	combinations of	key and	button
       presses.	 Each menu is divided into sections, separated by a horizontal
       line.   Some  menu  entries correspond to modes that can	be altered.  A
       check mark appears next to a mode that is currently active.   Selecting
       one of these modes toggles its state.  Other menu entries are commands;
       selecting one of	these performs the indicated function.

       All of the menu entries correspond to X actions.	 In  the  list	below,
       the menu	label is shown followed	by the action's	name in	parenthesis.

   Main	Options
       The  xterm  mainMenu  pops up when the "control"	key and	pointer	button
       one are pressed in a window.  This menu contains	items  that  apply  to
       both the	VT102 and Tektronix windows.  There are	several	sections:

       Commands	for managing X events:

	      Toolbar
		     Clicking on the "Toolbar" menu entry hides	the toolbar if
		     it	is visible, and	shows it if it is not.

	      Secure Keyboard (securekbd)
		     The Secure	Keyboard mode is helpful when typing in	 pass-
		     words or other sensitive data in an unsecure environment;
		     see SECURITY below	(but read the limitations carefully).

	      Allow SendEvents (allowsends)
		     Specifies whether or not synthetic	key and	button	events
		     generated	using  the X protocol SendEvent	request	should
		     be	interpreted or discarded.  This	corresponds to the al-
		     lowSendEvents resource.

	      Redraw Window (redraw)
		     Forces  the X display to repaint; useful in some environ-
		     ments.

       Commands	for capturing output:

	      Log to File (logging)
		     Captures text sent	to the screen in a logfile, as in  the
		     -l	logging	option.

	      Print-All	Immediately
		     Invokes  the  print-immediate action, sending the text of
		     the current window	directly to a file,  as	 specified  by
		     the  printFileImmediate, printModeImmediate and printOpt-
		     sImmediate	resources.

	      Print-All	on Error
		     Invokes the print-on-error	action,	which toggles  a  flag
		     telling  xterm  that if it	exits with an X	error, to send
		     the text of the current window directly  to  a  file,  as
		     specified	by  the	 printFileXError,  printModeXError and
		     printOptsXError resources.

	      Print Window (print)
		     Sends the text of the current window to the program given
		     in	the printerCommand resource.

	      Redirect to Printer (print-redir)
		     This  sets	the printerControlMode to 0 or 2.  You can use
		     this to turn the printer on as if an application had sent
		     the  appropriate control sequence.	 It is also useful for
		     switching the printer off if an application turns	it  on
		     without resetting the print control mode.

       Modes for setting keyboard style:

	      8-Bit Controls (8-bit-control)
		     Enabled  for VT220	emulation, this	controls whether xterm
		     will send 8-bit control sequences rather than using 7-bit
		     (ASCII)  controls,	 e.g.,	sending	 a  byte  in the range
		     128-159 rather than the escape character  followed	 by  a
		     second  byte.   Xterm  always  interprets	both 8-bit and
		     7-bit control sequences (see the document	Xterm  Control
		     Sequences).   This	corresponds to the eightBitControl re-
		     source.

	      Backarrow	Key (BS/DEL) (backarrow	key)
		     Modifies the behavior of the  backarrow  key,  making  it
		     transmit  either  a backspace (8) or delete (127) charac-
		     ter.  This	corresponds to the backarrowKey	resource.

	      Alt/NumLock Modifiers (num-lock)
		     Controls the treatment of Alt- and	NumLock-key modifiers.
		     This corresponds to the numLock resource.

	      Meta Sends Escape	(meta-esc)
		     Controls whether Meta keys	are converted into a two-char-
		     acter sequence with the character itself preceded by ESC.
		     This corresponds to the metaSendsEscape resource.

	      Delete is	DEL (delete-is-del)
		     Controls  whether	the  Delete  key on the	editing	keypad
		     should send DEL (127) or the  VT220-style	Remove	escape
		     sequence.	This corresponds to the	deleteIsDEL resource.

	      Old Function-Keys	(oldFunctionKeys)

	      HP Function-Keys (hpFunctionKeys)

	      SCO Function-Keys	(scoFunctionKeys)

	      Sun Function-Keys	(sunFunctionKeys)

	      VT220 Keyboard (sunKeyboard)
		     These  act	as a radio-button, selecting one style for the
		     keyboard layout.  It corresponds to  more	than  one  re-
		     source  setting:  sunKeyboard,  sunFunctionKeys, scoFunc-
		     tionKeys and hpFunctionKeys ."

       Commands	for process signalling:

	      Send STOP	Signal (suspend)

	      Send CONT	Signal (continue)

	      Send INT Signal (interrupt)

	      Send HUP Signal (hangup)

	      Send TERM	Signal (terminate)

	      Send KILL	Signal (kill)
		     These send	the SIGTSTP, SIGCONT, SIGINT, SIGHUP,  SIGTERM
		     and SIGKILL signals respectively, to the process group of
		     the process running under xterm (usually the shell).  The
		     SIGCONT function is especially useful if the user has ac-
		     cidentally	typed CTRL-Z, suspending the process.

	      Quit (quit)
		     Stop processing X events except to	support	the -hold  op-
		     tion,  and	 then  send a SIGHUP signal to the the process
		     group of the process running  under  xterm	 (usually  the
		     shell).

   VT Options
       The  vtMenu sets	various	modes in the VT102 emulation, and is popped up
       when the	"control" key and pointer button two are pressed in the	 VT102
       window.

       VT102/VT220 Modes:

	      Enable Scrollbar (scrollbar)
		     Enable  (or  disable) the scrollbar.  This	corresponds to
		     the -sb option and	the scrollBar resource.

	      Enable Jump Scroll (jumpscroll)
		     Enable (or	disable) jump scrolling.  This corresponds  to
		     the -j option and the jumpScroll resource.

	      Enable Reverse Video (reversevideo)
		     Enable  (or  disable) reverse-video.  This	corresponds to
		     the -rv option and	the reverseVideo resource.

	      Enable Auto Wraparound (autowrap)
		     Enable (or	disable) auto-wraparound.  This	corresponds to
		     the -aw option and	the autoWrap resource.

	      Enable Reverse Wraparound	(reversewrap)
		     Enable (or	disable) reverse wraparound.  This corresponds
		     to	the -rw	option and the reverseWrap resource.

	      Enable Auto Linefeed (autolinefeed)
		     Enable (or	disable) auto-linefeed.	 This is the VT102 NEL
		     function,	which  causes  the emulator to emit a linefeed
		     after each	carriage return.  There	 is  no	 corresponding
		     command-line option or resource setting.

	      Enable Application Cursor	Keys (appcursor)
		     Enable (or	disable) application cursor keys.  This	corre-
		     sponds to the appcursorDefault  resource.	 There	is  no
		     corresponding command-line	option.

	      Enable Application Keypad	(appkeypad)
		     Enable (or	disable) application keypad keys.  This	corre-
		     sponds to the appkeypadDefault  resource.	 There	is  no
		     corresponding command-line	option.

	      Scroll to	Bottom on Key Press (scrollkey)
		     Enable  (or  disable)  scrolling  to  the	bottom	of the
		     scrolling region on a keypress.  This corresponds to  the
		     -sk option	and the	scrollKey resource.

		     As	 a  special  case,  the	XON / XOFF keys	(control/S and
		     control/Q)	are ignored.

	      Scroll to	Bottom on Tty Output (scrollttyoutput)
		     Enable (or	 disable)  scrolling  to  the  bottom  of  the
		     scrolling	region on output to the	terminal.  This	corre-
		     sponds to the -si	option	and  the  scrollTtyOutput  re-
		     source.

	      Allow 80/132 Column Switching (allow132)
		     Enable (or	disable) switching between 80 and 132 columns.
		     This corresponds to the -132  option  and	the  c132  re-
		     source.

	      Keep Selection (keepSelection)
		     Tell  xterm whether to disown the selection when it stops
		     highlighting it, e.g., when an application	 modifies  the
		     display  so  that it no longer matches the	text which has
		     been highlighted.	As long	as xterm continues to own  the
		     selection,	it can provide the corresponding text to other
		     clients via cut/paste.  This corresponds to  the  keepSe-
		     lection resource.	There is no corresponding command-line
		     option.

	      Select to	Clipboard (selectToClipboard)
		     Tell xterm	whether	to use the PRIMARY  or	CLIPBOARD  for
		     SELECT  tokens  in	 the  translations resource which maps
		     keyboard and mouse	actions	to select/paste	actions.  This
		     corresponds  to the selectToClipboard resource.  There is
		     no	corresponding command-line option.

	      Enable Visual Bell (visualbell)
		     Enable (or	disable) visible bell (i.e., flashing) instead
		     of	 an  audible bell.  This corresponds to	the -vb	option
		     and the visualBell	resource.

	      Enable Bell Urgency (bellIsUrgent)
		     Enable (or	disable) Urgency window	manager	hint when Con-
		     trol-G is received.  This corresponds to the bellIsUrgent
		     resource.

	      Enable Pop on Bell (poponbell)
		     Enable (or	disable) raising of the	window when  Control-G
		     is	received.  This	corresponds to the -pop	option and the
		     popOnBell resource.

	      Enable Blinking Cursor (cursorblink)
		     Enable (or	disable) the  blinking-cursor  feature.	  This
		     corresponds  to  the  -bc	option and the cursorBlink re-
		     source.  There is also an escape sequence (see the	 docu-
		     ment  Xterm  Control  Sequences).	The menu entry and the
		     escape sequence states are	XOR'd: if  both	 are  enabled,
		     the  cursor  will	not blink, if only one is enabled, the
		     cursor will blink.

	      Enable Alternate Screen Switching	(titeInhibit)
		     Enable (or	disable) switching between the normal and  al-
		     ternate screens.  This corresponds	to the titeInhibit re-
		     source.  There is no corresponding	command-line option.

	      Enable Active Icon (activeicon)
		     Enable (or	disable) the active-icon feature.  This	corre-
		     sponds to the -ai option and the activeIcon resource.

	      Sixel Scrolling (sixelScrolling)
		     When  enabled,  sixel graphics are	positioned at the cur-
		     rent text cursor location,	scroll the image vertically if
		     larger  than the screen, and leave	the text cursor	at the
		     start of the next complete	line after the image when  re-
		     turning  to  text	mode (this is the default).  When dis-
		     abled, sixel graphics are positioned at the upper left of
		     the screen, are cropped to	fit the	screen,	and do not af-
		     fect the text cursor location.  This corresponds  to  the
		     sixelScrolling  resource.	There is no corresponding com-
		     mand-line option.

	      Private Color Registers (privateColorRegisters)
		     When enabled, each	graphic	image uses a separate  set  of
		     color  registers,	so  that  it essentially has a private
		     palette (this is the default).  If	it  is	not  set,  all
		     graphics  images share a common set of registers which is
		     how sixel and ReGIS graphics worked on  actual  hardware.
		     The  default is likely a more useful mode on modern True-
		     Color hardware.  This corresponds to the privateColorReg-
		     isters  resource.	There is no corresponding command-line
		     option.

       VT102/VT220 Commands:

	      Do Soft Reset (softreset)
		     Reset scroll regions.  This can be	convenient  when  some
		     program  has left the scroll regions set incorrectly (of-
		     ten a problem when	using VMS or  TOPS-20).	  This	corre-
		     sponds to the VT220 DECSTR	control	sequence.

	      Do Full Reset (hardreset)
		     The full reset entry will clear the screen, reset tabs to
		     every eight columns, and reset the	terminal  modes	 (such
		     as	 wrap  and smooth scroll) to their initial states just
		     after xterm has finished processing the command line  op-
		     tions.   This  corresponds	 to  the VT102 RIS control se-
		     quence, with a few	 obvious  differences.	 For  example,
		     your  session  is	not disconnected as a real VT102 would
		     do.

	      Reset and	Clear Saved Lines (clearsavedlines)
		     Perform a full reset, and also clear the saved lines.

       Commands	for setting the	current	screen:

	      Show Tek Window (tekshow)
		     When enabled, pops	the Tektronix 4014 window up (makes it
		     visible).	 When  disabled, hides the Tektronix 4014 win-
		     dow.

	      Switch to	Tek Mode (tekmode)
		     When enabled, pops	the Tektronix 4014 window up if	it  is
		     not  already  visible,  and  switches the input stream to
		     that window.  When	disabled,  hides  the  Tektronix  4014
		     window and	switches input back to the VTxxx window.

	      Hide VT Window (vthide)
		     When enabled, hides the VTxxx window, shows the Tektronix
		     4014 window if it was not already	visible	 and  switches
		     the  input	 stream	 to that window.  When disabled, shows
		     the VTxxx window, and switches the	input stream  to  that
		     window.

	      Show Alternate Screen (altscreen)
		     When enabled, shows the alternate screen.	When disabled,
		     shows the normal screen.  Note that the normal screen may
		     have saved	lines; the alternate screen does not.

   VT Fonts
       The  fontMenu  pops  up	when when the "control"	key and	pointer	button
       three are pressed in a window.  It sets the font	used in	the VT102 win-
       dow, or modifies	the way	the font is specified or displayed.  There are
       several sections.

       The first section allows	you to select the font from a set of  alterna-
       tives:

	      Default (fontdefault)
		     Set  the  font  to	 the  default, i.e., that given	by the
		     *VT100.font resource.

	      Unreadable (font1)
		     Set the font to that given	by the *VT100.font1 resource.

	      Tiny (font2)
		     Set the font to that given	by the *VT100.font2 resource.

	      Small (font3)
		     Set the font to that given	by the *VT100.font3 resource.

	      Medium (font4)
		     Set the font to that given	by the *VT100.font4 resource.

	      Large (font5)
		     Set the font to that given	by the *VT100.font5 resource.

	      Huge (font6)
		     Set the font to that given	by the *VT100.font6 resource.

	      Escape Sequence
		     This allows you to	set the	font last specified by the Set
		     Font  escape sequence (see	the document Xterm Control Se-
		     quences).

	      Selection	(fontsel)
		     This allows you to	set the	font specified the current se-
		     lection  as  a  font  name	 (if  the PRIMARY selection is
		     owned).

       The second section allows you to	modify the way it is displayed:

	      Bold Fonts
		     This is  normally	checked	 (enabled).   When  unchecked,
		     xterm  will  not use bold fonts.  The setting corresponds
		     to	the allowBoldFonts resource.

	      Line-Drawing Characters (font-linedrawing)
		     When set, tells xterm to draw its own line-drawing	 char-
		     acters.   Otherwise  it  relies  on  the  font containing
		     these.  Compare to	the forceBoxChars resource.

	      Packed Font (font-packed)
		     When set, tells xterm to use the minimum glyph-width from
		     a font when displaying characters.	 Use the maximum width
		     (unchecked) to help display proportional fonts.   Compare
		     to	the forcePackedFont resource.

	      Doublesized Characters (font-doublesize)
		     When set, xterm may ask the font server to	produce	scaled
		     versions of the normal font, for VT102 double-size	 char-
		     acters.

       The third section allows	you to modify the way it is specified:

	      TrueType Fonts (render-font)
		     If	 the  renderFont and corresponding resources were set,
		     this is a further control whether xterm will actually use
		     the Xft library calls to obtain a font.

	      UTF-8 Encoding (utf8-mode)
		     This  controls  whether  xterm uses UTF-8 encoding	of in-
		     put/output.  It is	useful for temporarily switching xterm
		     to	display	text from an application which does not	follow
		     the locale	settings.  It  corresponds  to	the  utf8  re-
		     source.

	      UTF-8 Fonts (utf8-fonts)
		     This controls whether xterm uses UTF-8 fonts for display.
		     It	is useful for temporarily switching xterm  to  display
		     text from an application which does not follow the	locale
		     settings.	It combines the	utf8 and utf8Fonts resources.

	      UTF-8 Titles (utf8-titles)
		     This controls whether xterm accepts  UTF-8	 encoding  for
		     title control sequences.  It corresponds to the utf8Fonts
		     resource.

		     Initially the checkmark is	set according to both the utf8
		     and  utf8Fonts  resource values.  If the latter is	set to
		     "always", the checkmark is	disabled.  Likewise, if	 there
		     are  no  fonts  given in the utf8Fonts subresources, then
		     the checkmark also	is disabled.

		     The standard XTerm	app-defaults file defines both sets of
		     fonts,  while  the	 UXTerm	app-defaults file defines only
		     one set.  assuming	the standard app-defaults files,  this
		     command  will  launch  xterm able to switch between UTF-8
		     and ISO-8859-1 encoded fonts:

			 uxterm	-class XTerm

	      The fourth section allows	you to enable or disable special oper-
	      ations  which  can  be controlled	by writing escape sequences to
	      the terminal.  These are disabled	if the SendEvents  feature  is
	      enabled:

	      Allow Color Ops (allow-font-ops)
		     This  corresponds	to the allowColorOps resource.	Enable
		     or	disable	control	sequences that set/query the colors.

	      Allow Font Ops (allow-font-ops)
		     This corresponds to the allowFontOps resource.  Enable or
		     disable control sequences that set/query the font.

	      Allow Tcap Ops (allow-tcap-ops)
		     Enable or disable control sequences that query the	termi-
		     nal's notion of its function-key strings, as  termcap  or
		     terminfo  capabilities.   This corresponds	to the allowT-
		     capOps resource.

	      Allow Title Ops (allow-title-ops)
		     Enable or disable control sequences that modify the  win-
		     dow title or icon name.  This corresponds to the allowTi-
		     tleOps resource.

	      Allow Window Ops (allow-window-ops)
		     Enable or disable extended	window control	sequences  (as
		     used  in dtterm).	This corresponds to the	allowWindowOps
		     resource.

   TEK Options
       The tekMenu sets	various	modes  in  the	Tektronix  emulation,  and  is
       popped  up when the "control" key and pointer button two	are pressed in
       the Tektronix window.  The current font size is checked	in  the	 modes
       section of the menu.

	      Large Characters (tektextlarge)

	      #2 Size Characters (tektext2)

	      #3 Size Characters (tektext3)

	      Small Characters (tektextsmall)

       Commands:

	      PAGE (tekpage)
		     Clear the Tektronix window.

	      RESET (tekreset)

	      COPY (tekcopy)

       Windows:

	      Show VT Window (vtshow)

	      Switch to	VT Mode	(vtmode)

	      Hide Tek Window (tekhide)

SECURITY
       X environments differ in	their security consciousness.

       o   Most	 servers, run under xdm, are capable of	using a	"magic cookie"
	   authorization scheme	that can provide a reasonable level  of	 secu-
	   rity	 for  many  people.  If	your server is only using a host-based
	   mechanism to	control	access to the server (see xhost(1)),  then  if
	   you	enable access for a host and other users are also permitted to
	   run clients on that same host, it is	possible that someone can  run
	   an  application  which uses the basic services of the X protocol to
	   snoop on your activities, potentially capturing a transcript	of ev-
	   erything you	type at	the keyboard.

       o   Any process which has access	to your	X display can manipulate it in
	   ways	that you might not anticipate, even redirecting	your  keyboard
	   to  itself  and sending events to your application's	windows.  This
	   is true even	with the "magic	cookie"	authorization  scheme.	 While
	   the allowSendEvents provides	some protection	against	rogue applica-
	   tions tampering with	your programs, guarding	against	a  snooper  is
	   harder.

       o   The	X input	extension for instance allows an application to	bypass
	   all of the other (limited) authorization and	security features, in-
	   cluding the GrabKeyboard protocol.

       o   The	possibility  of	an application spying on your keystrokes is of
	   particular concern when you want to type in	a  password  or	 other
	   sensitive data.  The	best solution to this problem is to use	a bet-
	   ter authorization mechanism than is provided	by X.

       Subject to all of these caveats,	a simple mechanism exists for protect-
       ing keyboard input in xterm.

       The  xterm  menu	 (see  MENUS  above)  contains a Secure	Keyboard entry
       which, when enabled, attempts to	ensure that all	keyboard input is  di-
       rected  only  to	xterm (using the GrabKeyboard protocol request).  When
       an application prompts you for a	password (or  other  sensitive	data),
       you  can	 enable	 Secure	Keyboard using the menu, type in the data, and
       then disable Secure Keyboard using the menu again.

       o   This	ensures	that you know which  window  is	 accepting  your  key-
	   strokes.

       o   It  cannot  ensure that there are no	processes which	have access to
	   your	X display that might be	observing the keystrokes as well.

       Only one	X client at a time can grab the	keyboard, so when you  attempt
       to  enable  Secure  Keyboard  it	may fail.  In this case, the bell will
       sound.  If the Secure Keyboard succeeds,	the foreground and  background
       colors will be exchanged	(as if you selected the	Reverse	Video entry in
       the Modes menu);	they will be exchanged	again  when  you  exit	secure
       mode.   If the colors do	not switch, then you should be very suspicious
       that you	are being spoofed.  If the application you  are	 running  dis-
       plays  a	 prompt	 before	asking for the password, it is safest to enter
       secure mode before the prompt gets displayed, and to make sure that the
       prompt  gets  displayed	correctly (in the new colors), to minimize the
       probability of spoofing.	 You can also bring up the menu	again and make
       sure that a check mark appears next to the entry.

       Secure  Keyboard	mode will be disabled automatically if your xterm win-
       dow becomes iconified (or otherwise unmapped), or if you	start up a re-
       parenting  window  manager (that	places a title bar or other decoration
       around the window) while	in Secure Keyboard mode.  (This	is  a  feature
       of  the	X protocol not easily overcome.)  When this happens, the fore-
       ground and background colors will be switched back and  the  bell  will
       sound in	warning.

CHARACTER CLASSES
       Clicking	 the  left  pointer  button twice in rapid succession (double-
       clicking) causes	all characters of the same class (e.g.,	letters, white
       space, punctuation) to be selected as a "word".	Since different	people
       have different preferences for what should be  selected	(for  example,
       should filenames	be selected as a whole or only the separate subnames),
       the default mapping can be overridden through the use of	the  charClass
       (class CharClass) resource.

       This resource is	a series of comma-separated of range:value pairs.  The
       range is	either a single	number or low-high in the range	of 0 to	65535,
       corresponding  to  the  code for	the character or characters to be set.
       The value is arbitrary, although	the default table uses	the  character
       number  of the first character occurring	in the set.  When not in UTF-8
       mode, only the first 256	bytes of this table will be used.

       The default table starts	as follows -

	   static int charClass[256] = {
	   /* NUL  SOH	STX  ETX  EOT  ENQ  ACK	 BEL */
	       32,   1,	  1,   1,   1,	 1,   1,   1,
	   /*  BS   HT	 NL   VT   NP	CR   SO	  SI */
		1,  32,	  1,   1,   1,	 1,   1,   1,
	   /* DLE  DC1	DC2  DC3  DC4  NAK  SYN	 ETB */
		1,   1,	  1,   1,   1,	 1,   1,   1,
	   /* CAN   EM	SUB  ESC   FS	GS   RS	  US */
		1,   1,	  1,   1,   1,	 1,   1,   1,
	   /*  SP    !	  "    #    $	 %    &	   ' */
	       32,  33,	 34,  35,  36,	37,  38,  39,
	   /*	(    )	  *    +    ,	 -    .	   / */
	       40,  41,	 42,  43,  44,	45,  46,  47,
	   /*	0    1	  2    3    4	 5    6	   7 */
	       48,  48,	 48,  48,  48,	48,  48,  48,
	   /*	8    9	  :    ;    <	 =    >	   ? */
	       48,  48,	 58,  59,  60,	61,  62,  63,
	   /*	@    A	  B    C    D	 E    F	   G */
	       64,  48,	 48,  48,  48,	48,  48,  48,
	   /*	H    I	  J    K    L	 M    N	   O */
	       48,  48,	 48,  48,  48,	48,  48,  48,
	   /*	P    Q	  R    S    T	 U    V	   W */
	       48,  48,	 48,  48,  48,	48,  48,  48,
	   /*	X    Y	  Z    [    \	 ]    ^	   _ */
	       48,  48,	 48,  91,  92,	93,  94,  48,
	   /*	`    a	  b    c    d	 e    f	   g */
	       96,  48,	 48,  48,  48,	48,  48,  48,
	   /*	h    i	  j    k    l	 m    n	   o */
	       48,  48,	 48,  48,  48,	48,  48,  48,
	   /*	p    q	  r    s    t	 u    v	   w */
	       48,  48,	 48,  48,  48,	48,  48,  48,
	   /*	x    y	  z    {    |	 }    ~	 DEL */
	       48,  48,	 48, 123, 124, 125, 126,   1,
	   /* x80  x81	x82  x83  IND  NEL  SSA	 ESA */
		1,   1,	  1,   1,   1,	 1,   1,   1,
	   /* HTS  HTJ	VTS  PLD  PLU	RI  SS2	 SS3 */
		1,   1,	  1,   1,   1,	 1,   1,   1,
	   /* DCS  PU1	PU2  STS  CCH	MW  SPA	 EPA */
		1,   1,	  1,   1,   1,	 1,   1,   1,
	   /* x98  x99	x9A  CSI   ST  OSC   PM	 APC */
		1,   1,	  1,   1,   1,	 1,   1,   1,
	   /*	-    i	 c/    L   ox	Y-    |	  So */
	      160, 161,	162, 163, 164, 165, 166, 167,
	   /*  ..   c0	 ip   <<    _	     R0	   - */
	      168, 169,	170, 171, 172, 173, 174, 175,
	   /*	o   +-	  2    3    '	 u   q|	   . */
	      176, 177,	178, 179, 180, 181, 182, 183,
	   /*	,    1	  2   >>  1/4  1/2  3/4	   ? */
	      184, 185,	186, 187, 188, 189, 190, 191,
	   /*  A`   A'	 A^   A~   A:	Ao   AE	  C, */
	       48,  48,	 48,  48,  48,	48,  48,  48,
	   /*  E`   E'	 E^   E:   I`	I'   I^	  I: */
	       48,  48,	 48,  48,  48,	48,  48,  48,
	   /*  D-   N~	 O`   O'   O^	O~   O:	   X */
	       48,  48,	 48,  48,  48,	48,  48, 215,
	   /*  O/   U`	 U'   U^   U:	Y'    P	   B */
	       48,  48,	 48,  48,  48,	48,  48,  48,
	   /*  a`   a'	 a^   a~   a:	ao   ae	  c, */
	       48,  48,	 48,  48,  48,	48,  48,  48,
	   /*  e`   e'	 e^   e:    i`	i'   i^	  i: */
	       48,  48,	 48,  48,  48,	48,  48,  48,
	   /*	d   n~	 o`   o'   o^	o~   o:	  -: */
	       48,  48,	 48,  48,  48,	48,  48, 247,
	   /*  o/   u`	 u'   u^   u:	y'    P	  y: */
	       48,  48,	 48,  48,  48,	48,  48,  48};

	      For example, the string  "33:48,37:48,45-47:48,38:48"  indicates
	      that  the	 exclamation  mark, percent sign, dash,	period,	slash,
	      and ampersand characters should be treated the same way as char-
	      acters  and  numbers.   This  is	useful for cutting and pasting
	      electronic mailing addresses and filenames.

KEY BINDINGS
       It is possible to rebind	keys  (or  sequences  of  keys)	 to  arbitrary
       strings for input, by changing the translations resources for the vt100
       or tek4014 widgets.  Changing  the  translations	 resource  for	events
       other than key and button events	is not expected, and will cause	unpre-
       dictable	behavior.

   ACTIONS
       The following actions are provided for use within the vt100 or  tek4014
       translations resources:

       allow-color-ops(on/off/toggle)
	       This  action sets, unsets or toggles the	allowColorOps resource
	       and is also invoked by the allow-color-ops entry	in fontMenu.

       allow-font-ops(on/off/toggle)
	       This action sets, unsets	or toggles the	allowFontOps  resource
	       and is also invoked by the allow-font-ops entry in fontMenu.

       allow-send-events(on/off/toggle)
	       This  action  sets,  unsets  or toggles the allowSendEvents re-
	       source and is also invoked by the allowsends entry in mainMenu.

       allow-tcap-ops(on/off/toggle)
	       This action sets, unsets	or toggles the	allowTcapOps  resource
	       and is also invoked by the allow-tcap-ops entry in fontMenu.

       allow-title-ops(on/off/toggle)
	       This  action sets, unsets or toggles the	allowTitleOps resource
	       and is also invoked by the allow-title-ops entry	in fontMenu.

       allow-window-ops(on/off/toggle)
	       This action sets, unsets	or toggles the allowWindowOps resource
	       and is also invoked by the allow-window-ops entry in fontMenu.

       alt-sends-escape()
	       This action toggles the state of	the altSendsEscape resource.

       bell([percent])
	       This action rings the keyboard bell at the specified percentage
	       above or	below the base volume.

       clear-saved-lines()
	       This action does	hard-reset() (see below) and also  clears  the
	       history	of  lines saved	off the	top of the screen.  It is also
	       invoked from the	clearsavedlines	entry in vtMenu.   The	effect
	       is identical to a hardware reset	(RIS) control sequence.

       copy-selection(destname [, ...])
	       This  action  puts  the currently selected text into all	of the
	       selections or cutbuffers	specified by destname.	Unlike select-
	       end,  it	does not send a	mouse position or otherwise modify the
	       internal	selection state.

       create-menu(m/v/f/t)
	       This action creates one of the menus used by xterm, if  it  has
	       not been	previously created.  The parameter values are the menu
	       names: mainMenu,	vtMenu,	fontMenu, tekMenu, respectively.

       dabbrev-expand()
	       Expands the word	before cursor by searching  in	the  preceding
	       text  on	 the  screen  and  in  the scrollback buffer for words
	       starting	with that  abbreviation.   Repeating  dabbrev-expand()
	       several times in	sequence searches for an alternative expansion
	       by looking farther back.	 Lack of more matches is signaled by a
	       beep().	Attempts to expand an empty word (i.e.,	when cursor is
	       preceded	by a space) yield  successively	 all  previous	words.
	       Consecutive identical expansions	are ignored.  The word here is
	       defined as a sequence of	non-whitespace characters.  This  fea-
	       ture  partially emulates	the behavior of	"dynamic abbreviation"
	       expansion in Emacs (bound there to M-/).	 Here  is  a  resource
	       setting for xterm which will do the same	thing:

		   *VT100*translations:	   #override \n\
			   Meta	<KeyPress> /:dabbrev-expand()

       deiconify()
	       Changes the window state	back to	normal,	if it was iconified.

       delete-is-del()
	       This action toggles the state of	the deleteIsDEL	resource.

       dired-button()
	       Handles	a button event (other than press and release) by echo-
	       ing the event's position	(i.e., character line and  column)  in
	       the following format:

		       ^X ESC G	<line+"	"> <col+" ">

       fullscreen(on/off/toggle)
	       This action sets, unsets	or toggles the fullscreen resource.

       iconify()
	       Iconifies the window.

       hard-reset()
	       This action resets the scrolling	region,	tabs, window size, and
	       cursor keys and clears the screen.  It is also invoked from the
	       hardreset entry in vtMenu.

       ignore()
	       This  action  ignores  the event	but checks for special pointer
	       position	escape sequences.

       insert()
	       This action inserts the character or string associated with the
	       key that	was pressed.

       insert-eight-bit()
	       This  action inserts an eight-bit (Meta)	version	of the charac-
	       ter or string associated	with the key that was  pressed.	  Only
	       single-byte values are treated specially.  The exact action de-
	       pends on	the value of  the  altSendsEscape  and	the  metaSend-
	       sEscape	and  the eightBitInput resources.  The metaSendsEscape
	       resource	is tested first.  See the eightBitInput	resource for a
	       full discussion.

	       The  term "eight-bit" is	misleading: xterm checks if the	key is
	       in the range 128	to 255 (the eighth bit is set).	 If the	 value
	       is  in  that range, depending on	the resource values, xterm may
	       then do one of the following:

	       o   add 128 to the value, setting its eighth bit,

	       o   send	an ESC byte before the key, or

	       o   send	the key	unaltered.

       exec-formatted(format, sourcename [, ...])
	       Execute an external command, using the  current	selection  for
	       part  of	the command's parameters.  The first parameter,	format
	       gives the basic command.	 Succeeding parameters specify the se-
	       lection source as in insert-selection.

	       The format parameter allows these substitutions:

	       %%   inserts a "%".

	       %P   the	 screen-position  at  the beginning of the highlighted
		    region, as a semicolon-separated pair  of  integers	 using
		    the	values that the	CUP control sequence would use.

	       %p   the	screen-position	after the beginning of the highlighted
		    region, using the same convention as "%P".

	       %S   the	length of the string that "%s" would insert.

	       %s   the	content	of the selection, unmodified.

	       %T   the	length of the string that "%t" would insert.

	       %t   the	selection, trimmed of leading/trailing whitespace, and
		    newlines changed to	single spaces.

	       %V   the	 video	attributes at the beginning of the highlighted
		    region, as a semicolon-separated list  of  integers	 using
		    the	values that the	SGR control sequence would use.

	       %v   the	 video attributes after	the end	of the highlighted re-
		    gion, using	the same convention as "%V".

	       After constructing the command-string, xterm forks a subprocess
	       and  executes  the  command,  which  completes independently of
	       xterm.

       exec-selectable(format, onClicks)
	       Execute an external command, using data copied from the	screen
	       for  part  of  the  command's parameters.  The first parameter,
	       format gives the	basic command as in exec-formatted.  The  sec-
	       ond  parameter  specifies the method for	copying	the data as in
	       the onClicks resource.

       insert-formatted(format,	sourcename [, ...])
	       Insert the current selection or data related to it,  formatted.
	       The  first parameter, format gives the template for the data as
	       in exec-formatted.  Succeeding parameters specify the selection
	       source as in insert-selection.

       insert-selectable(format, onClicks)
	       Insert  data  copied from the screen, formatted.	 The first pa-
	       rameter,	format gives the template for the data as in exec-for-
	       matted.	 The second parameter specifies	the method for copying
	       the data	as in the onClicks resource.

       insert-selection(sourcename [, ...])
	       This action inserts the string found in the selection  or  cut-
	       buffer indicated	by sourcename.	Sources	are checked in the or-
	       der given (case is significant) until one is found.   Commonly-
	       used  selections	 include:  PRIMARY,  SECONDARY,	and CLIPBOARD.
	       Cut buffers are typically named	CUT_BUFFER0  through  CUT_BUF-
	       FER7.

       insert-seven-bit()
	       This  action  is	a synonym for insert() The term	"seven-bit" is
	       misleading: it only implies that	xterm does not try to add  128
	       to the key's value as in	insert-eight-bit().

       interpret(control-sequence)
	       Interpret  the  given  control  sequence	locally, i.e., without
	       passing it to the host.	This works by  inserting  the  control
	       sequence	 at  the front of the input buffer.  Use "\" to	escape
	       octal digits in the string.  Xt does not	allow  you  to	put  a
	       null character (i.e., "\000") in	the string.

       keymap(name)
	       This  action  dynamically defines a new translation table whose
	       resource	name is	name with the suffix Keymap (case is  signifi-
	       cant).  The name	None restores the original translation table.

       larger-vt-font()
	       Set  the	 font to the next larger one, based on the font	dimen-
	       sions.  See also	set-vt-font().

       load-vt-fonts(name[,class])
	       Load fontnames from the given subresource name and class.  That
	       is, load	the "*VT100.name.font",	resource as "*VT100.font" etc.
	       If no name is given, the	original set of	fontnames is restored.

	       Unlike set-vt-font(), this does not affect the escape- and  se-
	       lect-fonts,  since  those are not based on resource values.  It
	       does affect the fonts loosely  organized	 under	the  "Default"
	       menu  entry,  including	font, boldFont,	wideFont and wideBold-
	       Font.

       maximize()
	       Resizes the window to fill the screen.

       meta-sends-escape()
	       This action toggles the state of	the metaSendsEscape resource.

       popup-menu(menuname)
	       This action displays the	specified  popup  menu.	  Valid	 names
	       (case is	significant) include:  mainMenu, vtMenu, fontMenu, and
	       tekMenu.

       print(printer-flags)
	       This action prints the window.  It is also invoked by the print
	       entry in	mainMenu.

	       The action accepts optional parameters, which temporarily over-
	       ride resource settings.	The parameter values are  matched  ig-
	       noring case:

	       noFormFeed
		    no	form  feed  will  be  sent at the end of the last line
		    printed (i.e., printerFormFeed is ``false'').

	       FormFeed
		    a form feed	will be	sent at	 the  end  of  the  last  line
		    printed (i.e., printerFormFeed is ``true'').

	       noNewLine
		    no	newline	 will  be  sent	 at  the  end of the last line
		    printed, and wrapped lines	will  be  combined  into  long
		    lines (i.e., printerNewLine	is ``false'').

	       NewLine
		    a  newline	will  be  sent	at  the	 end  of the last line
		    printed, and each line will	be limited (by adding  a  new-
		    line)   to	the  screen  width  (i.e.,  printerNewLine  is
		    ``true'').

	       noAttrs
		    the	page is	printed	 without  attributes  (i.e.,  printAt-
		    tributes is	``0'').

	       monoAttrs
		    the	 page  is  printed  with monochrome (vt220) attributes
		    (i.e., printAttributes is ``1'').

	       colorAttrs
		    the	page is	printed	 with  ANSI  color  attributes	(i.e.,
		    printAttributes is ``2'').

       print-everything(printer-flags)
	       This  action  sends the entire text history, in addition	to the
	       text currently visible, to the program given in the printerCom-
	       mand  resource.	 It allows the same optional parameters	as the
	       print action.  With a suitable printer command, the action  can
	       be used to load the text	history	in an editor.

       print-immediate()
	       Sends  the  text	 of  the current window	directly to a file, as
	       specified by  the  printFileImmediate,  printModeImmediate  and
	       printOptsImmediate resources.

       print-on-error()
	       Toggles	a flag telling xterm that if it	exits with an X	error,
	       to send the text	of the current window directly to a  file,  as
	       specified by the	printFileXError, printModeXError and printOpt-
	       sXError resources.

       print-redir()
	       This action toggles the printerControlMode  between  0  and  2.
	       The  corresponding popup	menu entry is useful for switching the
	       printer off if you happen to change your	mind after deciding to
	       print random binary files on the	terminal.

       quit()  This  action sends a SIGHUP to the subprogram and exits.	 It is
	       also invoked by the quit	entry in mainMenu.

       readline-button()
	       Supports	the optional readline feature by echoing repeated cur-
	       sor  forward  or	 backward  control sequences on	button release
	       event, to request that the host application update  its	notion
	       of the cursor's position	to match the button event.

       redraw()
	       This  action redraws the	window.	 It is also invoked by the re-
	       draw entry in mainMenu.

       restore()
	       Restores	the window to the size before it was last maximized.

       scroll-back(count [,units [,mouse] ])
	       This action scrolls the text window backward so that text  that
	       had  previously scrolled	off the	top of the screen is now visi-
	       ble.

	       The count argument indicates the	number of units	(which may  be
	       page, halfpage, pixel, or line) by which	to scroll.

	       An  adjustment can be specified for these values	by appending a
	       "+" or "-" sign followed	by a number, e.g., page-2 to specify 2
	       lines less than a page.

	       If  the	third  parameter mouse is given, the action is ignored
	       when mouse reporting is enabled.

       scroll-forw(count [,units [,mouse] ])
	       This action is similar to scroll-back except that it scrolls in
	       the other direction.

       secure()
	       This  action  toggles the Secure	Keyboard mode described	in the
	       section named SECURITY, and is invoked from the securekbd entry
	       in mainMenu.

       scroll-lock(on/off/toggle)
	       This  action sets, unsets or toggles internal state which tells
	       xterm whether Scroll Lock is active, subject to the allowScrol-
	       lLock resource.

       select-cursor-end(destname [, ...])
	       This  action  is	similar	to select-end except that it should be
	       used with select-cursor-start.

       select-cursor-extend()
	       This action is similar to select-extend except that  it	should
	       be used with select-cursor-start.

       select-cursor-start()
	       This  action  is	 similar to select-start except	that it	begins
	       the selection at	the current text cursor	position.

       select-end(destname [, ...])
	       This action puts	the currently selected text into  all  of  the
	       selections  or cutbuffers specified by destname.	 It also sends
	       a mouse position	and updates the	internal  selection  state  to
	       reflect the end of the selection	process.

       select-extend()
	       This  action  tracks the	pointer	and extends the	selection.  It
	       should only be bound to Motion events.

       select-set()
	       This action stores text that corresponds	to the current	selec-
	       tion, without affecting the selection mode.

       select-start()
	       This  action begins text	selection at the current pointer loca-
	       tion.  See the section on POINTER USAGE for information on mak-
	       ing selections.

       send-signal(signame)
	       This action sends the signal named by signame to	the xterm sub-
	       process (the shell or program specified	with  the  -e  command
	       line option).  It is also invoked by the	suspend, continue, in-
	       terrupt,	hangup,	terminate, and kill entries in mainMenu.   Al-
	       lowable	signal	names  are (case is not	significant): tstp (if
	       supported by the	operating system),  suspend  (same  as	tstp),
	       cont  (if  supported  by	the operating system), int, hup, term,
	       quit, alrm, alarm (same as alrm)	and kill.

       set-8-bit-control(on/off/toggle)
	       This action sets, unsets	or  toggles  the  eightBitControl  re-
	       source.	It is also invoked from	the 8-bit-control entry	in vt-
	       Menu.

       set-allow132(on/off/toggle)
	       This action sets, unsets	or toggles the c132 resource.	It  is
	       also invoked from the allow132 entry in vtMenu.

       set-altscreen(on/off/toggle)
	       This  action  sets, unsets or toggles between the alternate and
	       current screens.

       set-appcursor(on/off/toggle)
	       This action sets, unsets	or toggles  the	 handling  Application
	       Cursor  Key  mode and is	also invoked by	the appcursor entry in
	       vtMenu.

       set-appkeypad(on/off/toggle)
	       This action sets, unsets	or toggles the handling	of Application
	       Keypad  mode  and is also invoked by the	appkeypad entry	in vt-
	       Menu.

       set-autolinefeed(on/off/toggle)
	       This action sets, unsets	 or  toggles  automatic	 insertion  of
	       linefeeds.  It is also invoked by the autolinefeed entry	in vt-
	       Menu.

       set-autowrap(on/off/toggle)
	       This action sets, unsets	or toggles automatic wrapping of  long
	       lines.  It is also invoked by the autowrap entry	in vtMenu.

       set-backarrow(on/off/toggle)
	       This  action sets, unsets or toggles the	backarrowKey resource.
	       It is also invoked from the backarrow key entry in vtMenu.

       set-bellIsUrgent(on/off/toggle)
	       This action sets, unsets	or toggles the bellIsUrgent  resource.
	       It is also invoked by the bellIsUrgent entry in vtMenu.

       set-cursorblink(on/off/toggle)
	       This  action  sets, unsets or toggles the cursorBlink resource.
	       It is also invoked from the cursorblink entry in	vtMenu.

       set-cursesemul(on/off/toggle)
	       This action sets, unsets	or toggles the curses resource.	 It is
	       also invoked from the cursesemul	entry in vtMenu.

       set-font-doublesize(on/off/toggle)
	       This  action  sets,  unsets  or	toggles	the fontDoublesize re-
	       source.	It is also invoked by  the  font-doublesize  entry  in
	       fontMenu.

       set-hp-function-keys(on/off/toggle)
	       This  action  sets,  unsets  or	toggles	the hpFunctionKeys re-
	       source.	It is also invoked  by	the  hpFunctionKeys  entry  in
	       mainMenu.

       set-jumpscroll(on/off/toggle)
	       This  action  sets,  unsets or toggles the jumpscroll resource.
	       It is also invoked by the jumpscroll entry in vtMenu.

       set-font-linedrawing(on/off/toggle)
	       This action sets, unsets	or toggles the xterm's state regarding
	       whether	the  current  font  has	 line-drawing  characters  and
	       whether it should draw them directly.  It is  also  invoked  by
	       the font-linedrawing entry in fontMenu.

       set-font-packed(on/off/toggle)
	       This  action  sets, unsets or toggles the forcePackedFont's re-
	       source which controls use of  the  font's  minimum  or  maximum
	       glyph  width.   It  is also invoked by the font-packed entry in
	       fontMenu.

       set-keep-selection(on/off/toggle)
	       This action sets, unsets	or toggles the keepSelection resource.
	       It is also invoked by the keepSelection entry in	vtMenu.

       set-logging(on/off/toggle)
	       This  action  sets,  unsets or toggles the state	of the logging
	       option.

       set-old-function-keys(on/off/toggle)
	       This action sets, unsets	or toggles the state of	 legacy	 func-
	       tion  keys.  It is also invoked by the oldFunctionKeys entry in
	       mainMenu.

       set-marginbell(on/off/toggle)
	       This action sets, unsets	or toggles the marginBell resource.

       set-num-lock(on/off/toggle)
	       This action toggles the state of	the numLock resource.

       set-pop-on-bell(on/off/toggle)
	       This action sets, unsets	or toggles the popOnBell resource.  It
	       is also invoked by the poponbell	entry in vtMenu.

       set-private-colors(on/off/toggle)
	       This  action  sets, unsets or toggles the privateColorRegisters
	       resource.

       set-render-font(on/off/toggle)
	       This action sets, unsets	or toggles  the	 renderFont  resource.
	       It is also invoked by the render-font entry in fontMenu.

       set-reverse-video(on/off/toggle)
	       This  action sets, unsets or toggles the	reverseVideo resource.
	       It is also invoked by the reversevideo entry in vtMenu.

       set-reversewrap(on/off/toggle)
	       This action sets, unsets	or toggles the	reverseWrap  resource.
	       It is also invoked by the reversewrap entry in vtMenu.

       set-scroll-on-key(on/off/toggle)
	       This action sets, unsets	or toggles the scrollKey resource.  It
	       is also invoked from the	scrollkey entry	in vtMenu.

       set-scroll-on-tty-output(on/off/toggle)
	       This action sets, unsets	or  toggles  the  scrollTtyOutput  re-
	       source.	 It  is	also invoked from the scrollttyoutput entry in
	       vtMenu.

       set-scrollbar(on/off/toggle)
	       This action sets, unsets	or toggles the scrollbar resource.  It
	       is also invoked by the scrollbar	entry in vtMenu.

       set-sco-function-keys(on/off/toggle)
	       This  action  sets,  unsets  or toggles the scoFunctionKeys re-
	       source.	It is also invoked by  the  scoFunctionKeys  entry  in
	       mainMenu.

       set-select(on/off/toggle)
	       This  action  sets, unsets or toggles the selectToClipboard re-
	       source.	It is also invoked by the selectToClipboard  entry  in
	       vtMenu.

       set-sixel-scrolling(on/off/toggle)
	       This  action toggles between inline (sixel scrolling) and abso-
	       lute positioning.  It can also be controlled  via  DEC  private
	       mode  80	 (DECSDM)  or from the sixelScrolling entry in the bt-
	       Menu.

       set-sun-function-keys(on/off/toggle)
	       This action sets, unsets	or  toggles  the  sunFunctionKeys  re-
	       source.	 It  is	 also  invoked by the sunFunctionKeys entry in
	       mainMenu.

       set-sun-keyboard(on/off/toggle)
	       This action sets, unsets	or toggles the	sunKeyboard  resource.
	       It is also invoked by the sunKeyboard entry in mainMenu.

       set-tek-text(large/2/3/small)
	       This  action  sets the font used	in the Tektronix window	to the
	       value of	the selected resource according	to the argument.   The
	       argument	 can  be  either  a keyword or single-letter alias, as
	       shown in	parentheses:

	       large (l)
		    Use	resource fontLarge, same as menu entry tektextlarge.

	       two (2)
		    Use	resource font2,	same as	menu entry tektext2.

	       three (3)
		    Use	resource font3,	same as	menu entry tektext3.

	       small (s)
		    Use	resource fontSmall, same as menu entry tektextsmall.

       set-terminal-type(type)
	       This action directs output to either the	vt or tek windows, ac-
	       cording	to the type string.  It	is also	invoked	by the tekmode
	       entry in	vtMenu and the vtmode entry in tekMenu.

       set-titeInhibit(on/off/toggle)
	       This action sets, unsets	or toggles the	titeInhibit  resource,
	       which  controls	switching  between  the	 alternate and current
	       screens.

       set-toolbar(on/off/toggle)
	       This action sets, unsets	or toggles the toolbar feature.	 It is
	       also invoked by the toolbar entry in mainMenu.

       set-utf8-mode(on/off/toggle)
	       This  action  sets, unsets or toggles the utf8 resource.	 It is
	       also invoked by the utf8-mode entry in fontMenu.

       set-utf8-title(on/off/toggle)
	       This action sets, unsets	or toggles the utf8Title resource.  It
	       is also invoked by the utf8-title entry in fontMenu.

       set-visibility(vt/tek,on/off/toggle)
	       This  action  sets,  unsets or toggles whether or not the vt or
	       tek windows are visible.	 It is also invoked from  the  tekshow
	       and vthide entries in vtMenu and	the vtshow and tekhide entries
	       in tekMenu.

       set-visual-bell(on/off/toggle)
	       This action sets, unsets	or toggles  the	 visualBell  resource.
	       It is also invoked by the visualbell entry in vtMenu.

       set-vt-font(d/1/2/3/4/5/6/e/s [,normalfont [, boldfont]])
	       This  action sets the font or fonts currently being used	in the
	       VT102 window.  The first	argument is a  single  character  that
	       specifies the font to be	used:

	       d  or D indicate	the default font (the font initially used when
		      xterm was	started),

	       1 through 6 indicate the	fonts specified	by the	font1  through
		      font6 resources,

	       e  or  E	 indicate the normal and bold fonts that have been set
		      through escape codes (or specified  as  the  second  and
		      third action arguments, respectively), and

	       s or S indicate the font	selection (as made by programs such as
		      xfontsel(1)) indicated by	the second action argument.

	       If xterm	is configured to support  wide	characters,  an	 addi-
	       tional  two  optional parameters	are recognized for the e argu-
	       ment: wide font and wide	bold font.

       smaller-vt-font()
	       Set the font to the next	smaller	one, based on the font	dimen-
	       sions.  See also	set-vt-font().

       soft-reset()
	       This  action  resets  the scrolling region.  It is also invoked
	       from the	softreset entry	in vtMenu.  The	effect is identical to
	       a soft reset (DECSTR) control sequence.

       spawn-new-terminal(params)
	       Spawn  a	new xterm process.  This is available on systems which
	       have a modern version of	the process filesystem,	e.g., "/proc",
	       which xterm can read.

	       Use  the	 "cwd"	process	entry, e.g., /proc/12345/cwd to	obtain
	       the working directory of	the process which is  running  in  the
	       current xterm.

	       On   systems   which   have  the	 "exe"	process	 entry,	 e.g.,
	       /proc/12345/exe,	use this  to  obtain  the  actual  executable.
	       Otherwise, use the $PATH	variable to find xterm.

	       If  parameters  are  given  in the action, pass them to the new
	       xterm process.

       start-extend()
	       This action is similar to select-start except that  the	selec-
	       tion is extended	to the current pointer location.

       start-cursor-extend()
	       This  action is similar to select-extend	except that the	selec-
	       tion is extended	to the current text cursor position.

       string(string)
	       This action inserts the specified text string as	if it had been
	       typed.	Quotation  is  necessary if the	string contains	white-
	       space or	non-alphanumeric characters.  If the  string  argument
	       begins  with  the  characters  "0x", it is interpreted as a hex
	       character constant.

       tek-copy()
	       This action copies the escape codes used	to generate  the  cur-
	       rent  window contents to	a file in the current directory	begin-
	       ning with the name COPY.	 It is also invoked from  the  tekcopy
	       entry in	tekMenu.

       tek-page()
	       This action clears the Tektronix	window.	 It is also invoked by
	       the tekpage entry in tekMenu.

       tek-reset()
	       This action resets the Tektronix	window.	 It is also invoked by
	       the tekreset entry in tekMenu.

       vi-button()
	       Handles	a button event (other than press and release) by echo-
	       ing a control sequence computed from the	event's	line number in
	       the screen relative to the current line:

		       ESC ^P
	       or
		       ESC ^N

	       according  to whether the event is before, or after the current
	       line, respectively.  The	^N (or ^P) is repeated once  for  each
	       line that the event differs from	the current line.  The control
	       sequence	is omitted altogether if the button event  is  on  the
	       current line.

       visual-bell()
	       This action flashes the window quickly.

       The Tektronix window also has the following action:

       gin-press(l/L/m/M/r/R)
	       This action sends the indicated graphics	input code.

   DEFAULT KEY BINDINGS
       The default bindings in the VT102 window	use the	SELECT token, which is
       set by the selectToClipboard resource.  These are for the vt100 widget:

		     Shift <KeyPress> Prior:scroll-back(1,halfpage) \n\
		      Shift <KeyPress> Next:scroll-forw(1,halfpage) \n\
		    Shift <KeyPress> Select:select-cursor-start() \
					    select-cursor-end(SELECT, CUT_BUFFER0) \n\
		    Shift <KeyPress> Insert:insert-selection(SELECT, CUT_BUFFER0) \n\
			    Alt	<Key>Return:fullscreen() \n\
		   <KeyRelease>	Scroll_Lock:scroll-lock() \n\
	       Shift~Ctrl <KeyPress> KP_Add:larger-vt-font() \n\
	       Shift Ctrl <KeyPress> KP_Add:smaller-vt-font() \n\
	       Shift <KeyPress>	KP_Subtract:smaller-vt-font() \n\
			   ~Meta <KeyPress>:insert-seven-bit() \n\
			    Meta <KeyPress>:insert-eight-bit() \n\
			   !Ctrl <Btn1Down>:popup-menu(mainMenu) \n\
		      !Lock Ctrl <Btn1Down>:popup-menu(mainMenu) \n\
	    !Lock Ctrl @Num_Lock <Btn1Down>:popup-menu(mainMenu) \n\
		! @Num_Lock Ctrl <Btn1Down>:popup-menu(mainMenu) \n\
			   ~Meta <Btn1Down>:select-start() \n\
			 ~Meta <Btn1Motion>:select-extend() \n\
			   !Ctrl <Btn2Down>:popup-menu(vtMenu) \n\
		      !Lock Ctrl <Btn2Down>:popup-menu(vtMenu) \n\
	    !Lock Ctrl @Num_Lock <Btn2Down>:popup-menu(vtMenu) \n\
		! @Num_Lock Ctrl <Btn2Down>:popup-menu(vtMenu) \n\
		     ~Ctrl ~Meta <Btn2Down>:ignore() \n\
			    Meta <Btn2Down>:clear-saved-lines()	\n\
		       ~Ctrl ~Meta <Btn2Up>:insert-selection(SELECT, CUT_BUFFER0) \n\
			   !Ctrl <Btn3Down>:popup-menu(fontMenu) \n\
		      !Lock Ctrl <Btn3Down>:popup-menu(fontMenu) \n\
	    !Lock Ctrl @Num_Lock <Btn3Down>:popup-menu(fontMenu) \n\
		! @Num_Lock Ctrl <Btn3Down>:popup-menu(fontMenu) \n\
		     ~Ctrl ~Meta <Btn3Down>:start-extend() \n\
			 ~Meta <Btn3Motion>:select-extend() \n\
			    Ctrl <Btn4Down>:scroll-back(1,halfpage,m) \n\
		       Lock Ctrl <Btn4Down>:scroll-back(1,halfpage,m) \n\
	     Lock @Num_Lock Ctrl <Btn4Down>:scroll-back(1,halfpage,m) \n\
		  @Num_Lock Ctrl <Btn4Down>:scroll-back(1,halfpage,m) \n\
				 <Btn4Down>:scroll-back(5,line,m)     \n\
			    Ctrl <Btn5Down>:scroll-forw(1,halfpage,m) \n\
		       Lock Ctrl <Btn5Down>:scroll-forw(1,halfpage,m) \n\
	     Lock @Num_Lock Ctrl <Btn5Down>:scroll-forw(1,halfpage,m) \n\
		  @Num_Lock Ctrl <Btn5Down>:scroll-forw(1,halfpage,m) \n\
				 <Btn5Down>:scroll-forw(5,line,m)     \n\
				    <BtnUp>:select-end(SELECT, CUT_BUFFER0) \n\
				  <BtnDown>:ignore()

       The default bindings in the Tektronix window are	analogous but less ex-
       tensive.	 These are for the tek4014 widget:

			    ~Meta<KeyPress>: insert-seven-bit()	\n\
			     Meta<KeyPress>: insert-eight-bit()	\n\
			   !Ctrl <Btn1Down>: popup-menu(mainMenu) \n\
		      !Lock Ctrl <Btn1Down>: popup-menu(mainMenu) \n\
	    !Lock Ctrl @Num_Lock <Btn1Down>: popup-menu(mainMenu) \n\
		 !Ctrl @Num_Lock <Btn1Down>: popup-menu(mainMenu) \n\
			   !Ctrl <Btn2Down>: popup-menu(tekMenu) \n\
		      !Lock Ctrl <Btn2Down>: popup-menu(tekMenu) \n\
	    !Lock Ctrl @Num_Lock <Btn2Down>: popup-menu(tekMenu) \n\
		 !Ctrl @Num_Lock <Btn2Down>: popup-menu(tekMenu) \n\
		      Shift ~Meta<Btn1Down>: gin-press(L) \n\
			    ~Meta<Btn1Down>: gin-press(l) \n\
		      Shift ~Meta<Btn2Down>: gin-press(M) \n\
			    ~Meta<Btn2Down>: gin-press(m) \n\
		      Shift ~Meta<Btn3Down>: gin-press(R) \n\
			    ~Meta<Btn3Down>: gin-press(r)

       Here is an example which	uses shifted select/paste to copy to the clip-
       board, and unshifted select/paste for the primary selection.   In  each
       case,  a	 (different)  cut buffer is also a target or source of the se-
       lect/paste operation.  It is important to remember  however,  that  cut
       buffers	store  data in ISO-8859-1 encoding, while selections can store
       data in a variety of formats and	encodings.  While xterm	owns  the  se-
       lection,	it highlights it.  When	it loses the selection,	it removes the
       corresponding highlight.	 But you can still paste from the  correspond-
       ing cut buffer.

	   *VT100*translations:	   #override \n\
	       ~Shift~Ctrl<Btn2Up>: insert-selection(PRIMARY, CUT_BUFFER0) \n\
	       Shift~Ctrl<Btn2Up>:  insert-selection(CLIPBOARD,	CUT_BUFFER1) \n\
	       ~Shift<BtnUp>:	    select-end(PRIMARY,	CUT_BUFFER0) \n\
	       Shift<BtnUp>:	    select-end(CLIPBOARD, CUT_BUFFER1)

       In  the	example,  the  class name VT100	is used	rather than the	widget
       name.  These are	different; the class  name  provides  a	 more-specific
       match  than  the	widget name.  A	leading	"*" is used because the	widget
       hierarchy above the vt100 widget	depends	on whether the toolbar support
       is compiled into	xterm.

       Below  is  shown	a sample of how	the keymap() action may	be used	to add
       special keys for	entering commonly-typed	works:

	   *VT100.Translations:	#override <Key>F13: keymap(dbx)
	   *VT100.dbxKeymap.translations: \
		   <Key>F14:	   keymap(None)	\n\
		   <Key>F17:	   string("next") string(0x0d) \n\
		   <Key>F18:	   string("step") string(0x0d) \n\
		   <Key>F19:	   string("continue") string(0x0d) \n\
		   <Key>F20:	   string("print ") insert-selection(PRIMARY, CUT_BUFFER0)

   DEFAULT SCROLLBAR BINDINGS
       Key bindings are	normally associated with the vt100 or tek4014  widgets
       which  act as terminal emulators.  Xterm's scrollbar (and toolbar if it
       is configured) are separate widgets.  Because all of these  use	the  X
       Toolkit,	 they  have  corresponding  translations resources.  Those re-
       sources are distinct, and match different patterns, e.g.,  the  differ-
       ences  in  widget-name  and  number of levels of	widgets	which they may
       contain.

       The scrollbar widget is a child of the vt100 widget.  It	is  positioned
       on  top	of the vt100 widget.  Toggling the scrollbar on	and off	causes
       the vt100 widget	to resize.

       The default bindings for	the scrollbar  widget  use  only  mouse-button
       events:

				 <Btn5Down>: StartScroll(Forward) \n\
				 <Btn1Down>: StartScroll(Forward) \n\
				 <Btn2Down>: StartScroll(Continuous) MoveThumb() NotifyThumb() \n\
				 <Btn3Down>: StartScroll(Backward) \n\
				 <Btn4Down>: StartScroll(Backward) \n\
				 <Btn2Motion>: MoveThumb() NotifyThumb() \n\
				 <BtnUp>:    NotifyScroll(Proportional)	EndScroll()

       Events which the	scrollbar widget does not recognize at all are lost.

       However,	at startup, xterm augments these translations with the default
       translations used for the vt100 widget, together	with the resource "ac-
       tions"  which  those  translations  use.	  Because  the	scrollbar  (or
       menubar)	widgets	do not recognize these actions (but because it	has  a
       corresponding translation), they	are passed on to the vt100 widget.

       This augmenting of the scrollbar's translations has a few limitations:

       o   Xterm  knows	 what  the  default  translations are, but there is no
	   suitable library interface for determining  what  customizations  a
	   user	 may have added	to the vt100 widget.  All that xterm can do is
	   augment the scrollbar widget	to give	it the same starting point for
	   further customization by the	user.

       o   Events in the gap between the widgets may be	lost.

       o   Compose  sequences  begun  in one widget cannot be completed	in the
	   other, because the input methods for	each widget do not share  con-
	   text	information.

       Most  customizations  of	 the scrollbar translations do not concern key
       bindings.  Rather, users	are generally more interested in changing  the
       bindings	 of  the mouse buttons.	 For example, some people prefer using
       the left	pointer	button for dragging the	scrollbar thumb.  That can  be
       set up by altering the translations resource, e.g.,

	   *VT100.scrollbar.translations:  #override \n\
		   <Btn5Down>:	   StartScroll(Forward)	\n\
		   <Btn1Down>:	   StartScroll(Continuous) MoveThumb() NotifyThumb() \n\
		   <Btn4Down>:	   StartScroll(Backward) \n\
		   <Btn1Motion>:   MoveThumb() NotifyThumb() \n\
		   <BtnUp>:	   NotifyScroll(Proportional) EndScroll()

CONTROL	SEQUENCES AND KEYBOARD
       The  Xterm Control Sequences document lists the control sequences which
       an application can send xterm to	make it	 perform  various  operations.
       Most  of	these operations are standardized, from	either the DEC or Tek-
       tronix terminals, or from more widely used standards such as ISO-6429.

ENVIRONMENT
       Xterm sets several environment variables:

       DISPLAY
	    is the display name, pointing to the X server (see	DISPLAY	 NAMES
	    in X(1)).

       TERM is	set  according	to the terminfo	(or termcap) entry which it is
	    using as a reference.

	    On some systems, you may  encounter	 situations  where  the	 shell
	    which  you	use and	xterm are built	using libraries	with different
	    terminal databases.	 In that situation, xterm may choose a	termi-
	    nal	description not	known to the shell.

       WINDOWID
	    is set to the X window id number of	the xterm window.

       XTERM_FILTER
	    is	set  if	a locale-filter	is used.  The value is the pathname of
	    the	filter.

       XTERM_LOCALE
	    shows the locale which was used by xterm on	startup.   Some	 shell
	    initialization scripts may set a different locale.

       XTERM_SHELL
	    is	set  to	the pathname of	the program which is invoked.  Usually
	    that is a shell program, e.g., /bin/sh.  Since it is not necessar-
	    ily	a shell	program	however, it is distinct	from "SHELL".

       XTERM_VERSION
	    is	set  to	 the string displayed by the -version option.  That is
	    normally an	identifier for the X Window libraries  used  to	 build
	    xterm, followed by xterm's patch number in parenthesis.  The patch
	    number is also part	of the response	 to  a	Secondary  Device  At-
	    tributes (DA) control sequence (see	Xterm Control Sequences).

       Depending  on your system configuration,	xterm may also set the follow-
       ing:

       COLUMNS
	    the	width of the xterm in characters (cf: "stty columns").

       HOME when xterm is configured to	update utmp.

       LINES
	    the	height of the xterm in characters (cf: "stty rows").

       LOGNAME
	    when xterm is configured to	update utmp.

       SHELL
	    when xterm is configured to	update utmp.  It is also  set  if  you
	    provide a valid shell name as the optional parameter.

	    Xterm  sets	 this  to  an  absolute	pathname.  If you have set the
	    variable to	a relative pathname, xterm may set it to  a  different
	    shell pathname.

	    If you have	set this to an pathname	which does not correspond to a
	    valid shell, xterm may unset it, to	avoid confusion.

       TERMCAP
	    the	contents of the	termcap	entry  corresponding  to  $TERM,  with
	    lines  and	columns	 values	substituted for	the actual size	window
	    you	have created.

       TERMINFO
	    may	be defined to a	nonstandard location in	the configure script.

FILES
       The actual pathnames given may differ on	your system.

       /etc/shells
	    contains a list of valid shell programs, used by xterm  to	decide
	    if	the "SHELL" environment	variable should	be set for the process
	    started by xterm.

       /etc/utmp
	    the	system logfile,	which records user logins.

       /etc/wtmp
	    the	system logfile,	which records user logins and logouts.

       /usr/local/lib/X11/app-defaults/XTerm
	    the	xterm default application resources.

       /usr/local/lib/X11/app-defaults/XTerm-color
	    the	xterm color application	resources.  If your  display  supports
	    color, use this
		      *customization: -color
	    in	your  .Xdefaults  file to automatically	use this resource file
	    rather than	/usr/local/lib/X11/app-defaults/XTerm.	If you do  not
	    do	this, xterm uses its compiled-in default resource settings for
	    colors.

       /usr/local/share/pixmaps
	    the	directory in which xterm's pixmap icon files are installed.

ERROR MESSAGES
       Most of the fatal error messages	from xterm use the following format:
	      xterm: Error XXX,	errno YYY: ZZZ
       The XXX codes (which are	used by	xterm as its exit-code)	are listed be-
       low, with a brief explanation.

       1    is	used  for  miscellaneous errors, usually accompanied by	a spe-
	    cific message,

       11   ERROR_FIONBIO
	    main: ioctl() failed on FIONBIO

       12   ERROR_F_GETFL
	    main: ioctl() failed on F_GETFL

       13   ERROR_F_SETFL
	    main: ioctl() failed on F_SETFL

       14   ERROR_OPDEVTTY
	    spawn: open() failed on /dev/tty

       15   ERROR_TIOCGETP
	    spawn: ioctl() failed on TIOCGETP

       17   ERROR_PTSNAME
	    spawn: ptsname() failed

       18   ERROR_OPPTSNAME
	    spawn: open() failed on ptsname

       19   ERROR_PTEM
	    spawn: ioctl() failed on I_PUSH/"ptem"

       20   ERROR_CONSEM
	    spawn: ioctl() failed on I_PUSH/"consem"

       21   ERROR_LDTERM
	    spawn: ioctl() failed on I_PUSH/"ldterm"

       22   ERROR_TTCOMPAT
	    spawn: ioctl() failed on I_PUSH/"ttcompat"

       23   ERROR_TIOCSETP
	    spawn: ioctl() failed on TIOCSETP

       24   ERROR_TIOCSETC
	    spawn: ioctl() failed on TIOCSETC

       25   ERROR_TIOCSETD
	    spawn: ioctl() failed on TIOCSETD

       26   ERROR_TIOCSLTC
	    spawn: ioctl() failed on TIOCSLTC

       27   ERROR_TIOCLSET
	    spawn: ioctl() failed on TIOCLSET

       28   ERROR_INIGROUPS
	    spawn: initgroups()	failed

       29   ERROR_FORK
	    spawn: fork() failed

       30   ERROR_EXEC
	    spawn: exec() failed

       32   ERROR_PTYS
	    get_pty: not enough	ptys

       34   ERROR_PTY_EXEC
	    waiting for	initial	map

       35   ERROR_SETUID
	    spawn: setuid() failed

       36   ERROR_INIT
	    spawn: can't initialize window

       46   ERROR_TIOCKSET
	    spawn: ioctl() failed on TIOCKSET

       47   ERROR_TIOCKSETC
	    spawn: ioctl() failed on TIOCKSETC

       49   ERROR_LUMALLOC
	    luit: command-line malloc failed

       50   ERROR_SELECT
	    in_put: select() failed

       54   ERROR_VINIT
	    VTInit: can't initialize window

       57   ERROR_KMMALLOC1
	    HandleKeymapChange:	malloc failed

       60   ERROR_TSELECT
	    Tinput: select() failed

       64   ERROR_TINIT
	    TekInit: can't initialize window

       71   ERROR_BMALLOC2
	    SaltTextAway: malloc() failed

       80   ERROR_LOGEXEC
	    StartLog: exec() failed

       83   ERROR_XERROR
	    xerror: XError event

       84   ERROR_XIOERROR
	    xioerror: X	I/O error

       85   ERROR_ICEERROR
	    ICE	I/O error

       90   ERROR_SCALLOC
	    Alloc: calloc() failed on base

       91   ERROR_SCALLOC2
	    Alloc: calloc() failed on rows

       102  ERROR_SAVE_PTR
	    ScrnPointers: malloc/realloc() failed

BUGS
       Large pastes do not work	on some	systems.  This is not a	bug in	xterm;
       it  is  a  bug  in  the pseudo terminal driver of those systems.	 xterm
       feeds large pastes to the pty only as fast as the pty will accept data,
       but  some  pty  drivers do not return enough information	to know	if the
       write has succeeded.

       When connected to an input method, it is	possible for xterm to hang  if
       the XIM server is suspended or killed.

       Many of the options are not resettable after xterm starts.

       This program still needs	to be rewritten.  It should be split into very
       modular sections, with the various emulators being completely  separate
       widgets	that  do not know about	each other.  Ideally, you'd like to be
       able to pick and	choose emulator	widgets	and stick them into  a	single
       control widget.

       There  needs  to	 be  a	dialog box to allow entry of the Tek COPY file
       name.

SEE ALSO
       resize(1), luit(1), uxterm(1), X(1), pty(4), tty(4)

       Xterm Control Sequences (this is	the file ctlseqs.ms).

       http://invisible-island.net/xterm/xterm.html
       http://invisible-island.net/xterm/ctlseqs/ctlseqs.html

AUTHORS
       Far too many people, including:

       Loretta Guarino Reid (DEC-UEG-WSL), Joel	McCormack (DEC-UEG-WSL), Terry
       Weissman	 (DEC-UEG-WSL),	 Edward	 Moy  (Berkeley), Ralph	R. Swick (MIT-
       Athena),	Mark Vandevoorde (MIT-Athena),	Bob  McNamara  (DEC-MAD),  Jim
       Gettys (MIT-Athena), Bob	Scheifler (MIT X Consortium), Doug Mink	(SAO),
       Steve Pitschke (Stellar), Ron Newman (MIT-Athena), Jim  Fulton  (MIT  X
       Consortium), Dave Serisky (HP), Jonathan	Kamens (MIT-Athena), Jason Ba-
       con, Stephen P. Wall, David Wexelblat, and Thomas Dickey	(invisible-is-
       land.net).

Patch #312			  2014-09-28			      XTERM(1)

NAME | SYNOPSIS | DESCRIPTION | EMULATIONS | OTHER FEATURES | OPTIONS | RESOURCES | POINTER USAGE | SELECT/PASTE | MENUS | SECURITY | CHARACTER CLASSES | KEY BINDINGS | CONTROL SEQUENCES AND KEYBOARD | ENVIRONMENT | FILES | ERROR MESSAGES | BUGS | SEE ALSO | AUTHORS

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=xterm&sektion=1&manpath=FreeBSD+10.1-RELEASE+and+Ports>

home | help