Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
xsane(1)		    General Commands Manual		      xsane(1)

NAME
       xsane - scanner frontend	for SANE

SYNOPSIS
       xsane  [--version|-v]  [--license|-l] [--device-settings	file |-d file]
       [--viewer|-V] [--save|-s]  [--copy|-c]  [--fax|-f]  [--mail|-m]	[--no-
       mode-selection|-n] [--Fixed|-F] [--Resizable|-R]	[--print-filenames|-p]
       [--force-filename name |-N name]	[--display d] [--sync] [devicename]

DESCRIPTION
       xsane provides a	graphical user-interface to control an image  acquisi-
       tion  device such as a flatbed scanner.	It allows previewing and scan-
       ning individual images and can be invoked either	directly from the com-
       mand-line  or through The GIMP image manipulation program.  In the for-
       mer case, xsane acts as	a  stand-alone	program	 that  saves  acquired
       images  in  a  suitable PNM format (PBM for black-and-white images, PGM
       for grayscale images, and PPM for color images) or converts  the	 image
       to  JPEG, PNG, PS or TIFF.  In the latter case, the images are directly
       passed to The GIMP for further processing.

       xsane accesses image acquisition	 devices  through  the	SANE  (Scanner
       Access  Now  Easy) interface.  The list of available devices depends on
       installed hardware and configuration.  When invoked without an explicit
       devicename  argument,  xsane  presents  a  dialog listing all known and
       available devices.  To access an	available device that is not known  to
       the  system, the	devicename must	be specified explicitly. The format of
       devicename is backendname:devicefile (eg: umax:/dev/sga).

RUNNING	UNDER THE GIMP
       To run xsane under the gimp(1), you should  at  first  make  sure  that
       xsane  is compiled with gimp support by entering	"xsane -v" on a	shell.
       If xsane	is compiled with gimp support then simply set a	symbolic  link
       from  the xsane-binary to one of	the gimp(1) plug-ins directories.  For
       example,	for gimp-1.0.x the command

	      ln -s @BINDIR@/xsane ~/.gimp/plug-ins/

       for gimp	1.2.x the command:

	      ln -s @BINDIR@/xsane ~/.gimp-1.2/plug-ins/

       and for gimp 2.0.x the command:

	      ln -s @BINDIR@/xsane ~/.gimp-2.0/plug-ins/

       adds a symlink for the xsane binary to the user's  plug-ins  directory.
       After  creating this symlink, xsane will	be queried by gimp(1) the next
       time it's  invoked.   From  then	 on,  xsane  can  be  invoked  through
       "Xtns->XSane->Device	dialog..."     (gimp-1.0.x)	or     through
       "File->Acquire->XSane->Device dialog..."	(gimp-1.2.x  and  2.0.x)  menu
       entry.

       You'll  also find that the "Xtns->XSane"	or "File->Acquire->XSane" menu
       contains	short-cuts to the SANE devices that were available at the time
       the  xsane  was	queried.  Note that gimp(1) caches these short-cuts in
       ~/.gimp/pluginrc.  Thus,	when the list  of  available  devices  changes
       (e.g.,  a  new  scanner	is  installed or the device of the scanner has
       changed), then it is typically desirable	to rebuild this	cache.	To  do
       this,   you   can  either  touch(1)  the	 xsane	binary	(e.g.,	"touch
       @BINDIR@/xsane")	or delete the plugin cache  (e.g.,  "rm	 ~/.gimp/plug-
       inrc").	 Either	 way, invoking gimp(1) afterwards will cause the plug-
       inrc to be rebuilt.

       When xsane is started from the gimp then	it is not possible  to	add  a
       devicename explicitly. You have to make the devices known to the	system
       by configuring sane-dll,	sane-net and saned.

OPTIONS
       If the --version	or -v flag is given xsane prints  a  version  informa-
       tion,  some  information	 about	gtk+  and  gimp	version	it is compiled
       against and lists the supported file formats, then it exits.

       when the	--license or -l	flag is	given xsane prints license information
       and exits.

       The --device-settings or	-d flag	reads the next option as default file-
       name for	device settings. The extension ".drc" must not be included.

       The --viewer or -V flag forces xsane to start in	viewer mode.

       The --save or -s	flag forces xsane to start in save mode.

       The --copy or -c	flag forces xsane to start in copy mode.

       The --fax or -f flag forces xsane to start in fax mode.

       The --mail or -m	flag forces xsane to start in mail mode.

       The --no-mode-selection or -n flag disables the	menu  for  xsane  mode
       selection (viewer, save,	copy, fax, mail).

       If  the --Fixed or -F flag is given then	xsane uses a fixed, non	resiz-
       able main window.  The flag overwrites the preferences value.

       If the --Resizable or -R	flag is	given then xsane uses a	 scrolled  and
       resizable main window.  The flag	overwrites the preferences value.

       If --print-filenames or -p flag is given	then xsane prints the names of
       created files to	the standard output.

       When the	flag --force-filename or -N is given then xsane	reads the next
       option  as  default  image  filename.  The name should be of the	format
       "name-###.ext". The selection  box  for	filenames  is  disabled.  This
       option  normally	should be used with the	option --no-mode-selection and
       --save.

       The --display flag selects the X11 display used to present the  graphi-
       cal user-interface (see X(1) for	details).

       The  --sync flag	requests a synchronous connection with the X11 server.
       This is for debugging purposes only.

ENVIRONMENT
       SANE_DEFAULT_DEVICE
	      is used to preselect the device in the device dialog.  This  way
	      you only have to accept the device (<ENTER> or OK-Button).

FILES
       $HOME/.sane/xsane/xsane.rc
	      This  files  holds  the  user  preferences.  Normally, this file
	      should not be manipulated	directly.  Instead,  the  user	should
	      customize	the program through the	"Preferences" menu.

       $HOME/.sane/xsane/devicename.rc
	      For  each	device,	there is one rc-file that holds	the saved set-
	      tings for	that particular	device.	 Normally,  this  file	should
	      not  be  manipulated directly.  Instead, the user	should use the
	      xsane interface to select	appropriate values and then  save  the
	      device  settings	using  the "Preferences->Save Device Settings"
	      menubar entry.

       @SANEDATADIR@/xsane/xsane-style.rc
	      This system-wide file controls the aspects of the	user-interface
	      such  as	colors and fonts.  It is a GTK style file and provides
	      fine control over	the visual aspects of the user-interface.

       $HOME/.sane/xsane/xsane-style.rc
	      This file	serves the same	purpose	as the system-wide style file.
	      If present, it takes precedence over the system wide style file.

SEE ALSO
       gimp(1),	  xscanimage(1),   scanimage(1),   sane-dll(5),	  sane-net(5),
       saned(1), sane-scsi(5), sane-usb(5), sane-"backendname"(5)

AUTHOR
       Oliver Rauch <Oliver.Rauch@rauch-domain.de>

				  15 Jun 2002			      xsane(1)

NAME | SYNOPSIS | DESCRIPTION | RUNNING UNDER THE GIMP | OPTIONS | ENVIRONMENT | FILES | SEE ALSO | AUTHOR

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=xsane&sektion=1&manpath=FreeBSD+12.0-RELEASE+and+Ports>

home | help