Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
MODE2(1)			 User Commands			      MODE2(1)

NAME
       mode2,  smode2,	xmode2 - shows the pulse/space length of infrared sig-
       nals

SYNOPSIS
       xmode2 [options]

DESCRIPTION
       The main	purpose	of these programs is to	check operation	of your	 home-
       brew  LIRC  receiver  hardware and to see the IR	waveform of the	remote
       controller without an expensive oscilloscope. Very  useful  for	debug-
       ging.  Of course	this program won't work	with hardware that decodes the
       signals itself like e.g.	TV cards or the	Irman.

       xmode2 is based on smode2 by Sinkovics Zoltan. It is just a  conversion
       from  svga  to X	with some basic	support	for resizing. The only differ-
       ences are that the --mode option	enables	an  alternative	 display  mode
       and that	xmode2 can read	and visualise mode2 output from	stdin.

       -h --help
	      display usage summary

       -v --version
	      display version

       -d --device=device
	      read from	given device

       -H --driver=driver
	      use given	driver

       -g --geometry=geometry window geometry

       -t --timediv=value
	      ms per unit

       -m --mode
	      enable alternative display mode

       -r --raw
	      access device directly

SEE ALSO
       mode2(1), smode2(1), xmode2(1)

       The  documentation  for	lirc is	maintained as html pages. They are lo-
       cated under html/ in the	documentation directory.

mode2 0.9.0			  March	2011			      MODE2(1)

NAME | SYNOPSIS | DESCRIPTION | SEE ALSO

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=xmode2&sektion=1&manpath=FreeBSD+13.0-RELEASE+and+Ports>

home | help