Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
XFERFAXLOG(5F)							XFERFAXLOG(5F)

NAME
       xferfaxlog - HylaFAX activity log

DESCRIPTION
       The file	etc/xferfaxlog contains	information about inbound and outbound
       activities.  The	file contains one line per inbound  or	outbound  call
       (except for facsimile documents retrieved by polling in which case mul-
       tiple entries may be present for	a single call).	 If the	 modem	config
       setting	LogCalls  is set to true, then the file	also contains one line
       per  received  call.   Lines  are  fixed-format,	 tab-separated	 ASCII
       strings.

       Each record of a	facsimile transmission is of the form:
	    date SEND commid modem jobid jobtag	sender ``dest-number'' ``CSI''
       params  #pages  jobtime	conntime  ``reason''  _null_   _null_	_null_
       ``owner'' ``dcs''

       A facsimile reception record is of the form:
	    date RECV commid modem fax.tif _null_ fax ``local-number'' ``TSI''
       params  #pages  jobtime	conntime  ``reason''  ``CallID1''  ``CallID2''
       ``CallID3...CallIDn'' _null_ ``dcs''

       Each inbound call record	is of the form:
	    date CALL commid modem _null_ _null_ fax ``local-number'' <null> 0
       0 jobtime conntime ``reason'' ``CallID1''  ``CallID2''  ``CallID3..Cal-
       lIDn'' _null_ ``dcs''

       Each facsimile document retrieved by polling has	a record of the	form:
	    date POLL commid modem jobid jobtag	sender ``dest-number'' ``TSI''
       params #pages jobtime conntime ``reason'' _null_	_null_ _null_

       An alphanumeric pager request has a record of the form:
	    date  PAGE	commid	modem  jobid  jobtag  sender   ``dest-number''
       ``_null_'' 0 0 jobtime conntime ``reason'' _null_ _null_	``owner''

       The following describes the fields in the above records:

       date	     The  date	and  time  of  the  transaction	 in the	format
		     MM/DD/YY HH:MM , where MM is the numeric  month,  DD  the
		     numeric  day,  YY	the  last  two digits of the year, and
		     HH:MM is the time in 24-hour format.

       commid	     The communication identifier for the call.

       modem	     The device	identifier for the modem that was used	to  do
		     the send or receive.

       jobid	     The job number for	outbound calls.

       jobtag	     The client-specified job tag for outbound calls.

       fax.tif	     The associated recvq fax TIFF file	for the	event.

       sender	     The sender/receiver's electronic mailing address (facsim-
		     ile receptions  are  always  attributed  to  the  ``fax''
		     user).

       dest-number   The phone number dialed for outgoing calls.

       TSI	     The  Transmitter Subscriber Identification	string (as re-
		     ceived) for incoming calls.

       CSI	     The Caller	Subscriber Identification string of the	remote
		     machine (as reported) for outgoing	calls.

       local-number  The local phone number on which the data was received.

       params	     The  negotiated  facsimile	 session  parameters  used for
		     transferring data encoded as described below.

       #pages	     The total number of pages transferred.

       jobtime	     The duration of the  session;  in	the  format  HH:MM:SS.
		     This  time	 includes  setup  overhead  and	any time spent
		     cleaning up after a call.

       conntime	     The time spent on the  phone;  in	the  format  HH:MM:SS.
		     This  should be the time used by the PTT to calculate us-
		     age charges.

       reason	     A string that indicates if	any  problem  occurred	during
		     the session.

       CIDName	     The received CIDName value	for the	session.

       CIDNumber     The received CIDNumber value for the session.

       owner	     The login name of the job owner.

       dcs	     The T.30 DCS string that was used in the facsimile	commu-
		     nication.

       Note that fields	may have embedded blanks.  Session parameters are  en-
       coded as	a decimal number that contains a packed	set of Class 2 session
       parameter values.  The format is: 2 bits	 for  vertical	resolution,  3
       bits  for  signalling  rate,  3	bits  for  page	width, 2 bits for page
       length, 2 bits for data format, 1 bit for ECM use, 1 bit	of BF use, and
       3  bits for the min scanline time.  The page counts are always integral
       numbers.	 Partial pages that are	to be retransmitted are	 not  included
       in the page count.

       The  simple  ASCII  format was designed to be easy to process with pro-
       grams like awk(1).

NOTES
       The sender field	does not necessarily represent the submitter's	actual
       identity.   For example,	it reflects the	value given by the sendfax(8C)
       ``-f'' option.  Be cautious that	this field is not utilized for	audit-
       ing if the fax user base	is not trusted.

BUGS
       The date	format will ``break'' in the year 2000.	 Information should be
       recorded	on a per-page basis for	facsimile communications.

SEE ALSO
       faxq(8C)	faxsend(8C) faxgetty(8C)

				 June 5, 1996			XFERFAXLOG(5F)

NAME | DESCRIPTION | NOTES | BUGS | SEE ALSO

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=xferfaxlog&sektion=5f&manpath=FreeBSD+13.0-RELEASE+and+Ports>

home | help