Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
XDM(1)			    General Commands Manual			XDM(1)

NAME
       xdm - X Display Manager with support for	XDMCP, host chooser

SYNOPSIS
       xdm [ -config configuration_file	] [ -nodaemon ]	[ -debug debug_level ]
       [ -error	error_log_file	]  [  -resources  resource_file	 ]  [  -server
       server_entry ] [	-session session_program ]

DESCRIPTION
       Xdm  manages a collection of X displays,	which may be on	the local host
       or remote servers.  The design of xdm was guided	by the needs of	X ter-
       minals  as well as The Open Group standard XDMCP, the X Display Manager
       Control Protocol.  Xdm provides services	similar	to those  provided  by
       init,  getty and	login on character terminals: prompting	for login name
       and password, authenticating the	user, and running a ``session.''

       A ``session'' is	defined	by the lifetime	of a  particular  process;  in
       the  traditional	character-based	terminal world,	it is the user's login
       shell.  In the xdm context, it is an arbitrary session  manager.	  This
       is  because  in	a  windowing environment, a user's login shell process
       does not	necessarily have any terminal-like  interface  with  which  to
       connect.	  When	a real session manager is not available, a window man-
       ager or terminal	emulator is typically used as the ``session manager,''
       meaning that termination	of this	process	terminates the user's session.

       When  the  session  is terminated, xdm resets the X server and (option-
       ally) restarts the whole	process.

       When xdm	receives an Indirect query via XDMCP, it  can  run  a  chooser
       process to perform an XDMCP BroadcastQuery (or an XDMCP Query to	speci-
       fied hosts) on behalf of	the display and	offer a	menu of	possible hosts
       that  offer  XDMCP  display  management.	 This feature is useful	with X
       terminals that do not offer a host menu themselves.

       Xdm can be configured to	ignore BroadcastQuery messages	from  selected
       hosts.	This is	useful when you	don't want the host to appear in menus
       produced	by chooser or X	terminals themselves.

       Because xdm provides the	first interface	that users will	see, it	is de-
       signed to be simple to use and easy to customize	to the needs of	a par-
       ticular site.  Xdm has many options, most of which have reasonable  de-
       faults.	 Browse	 through  the various sections of this manual, picking
       and choosing the	things you want	to change.  Pay	 particular  attention
       to  the	Session	Program	section, which will describe how to set	up the
       style of	session	desired.

OVERVIEW
       xdm is highly configurable, and most of its behavior can	be  controlled
       by  resource  files  and	shell scripts.	The names of these files them-
       selves are resources read from the file xdm-config or the file named by
       the -config option.

       xdm  offers  display  management	 two  different	ways.  It can manage X
       servers running on the local machine and	specified in Xservers, and  it
       can  manage  remote  X servers (typically X terminals) using XDMCP (the
       XDM Control Protocol) as	specified in the Xaccess file.

       The resources of	the X clients run by xdm outside the  user's  session,
       including  xdm's	own login window, can be affected by setting resources
       in the Xresources file.

       For X terminals that do not offer a menu	of hosts to get	 display  man-
       agement from, xdm can collect willing hosts and run the chooser program
       to offer	the user a menu.  For X	displays attached to a host, this step
       is typically not	used, as the local host	does the display management.

       After  resetting	 the X server, xdm runs	the Xsetup script to assist in
       setting up the screen the user sees along with the xlogin widget.

       The xlogin widget, which	xdm presents, offers the  familiar  login  and
       password	prompts.

       After the user logs in, xdm runs	the Xstartup script as root.

       Then  xdm  runs	the  Xsession script as	the user.  This	system session
       file may	do some	additional startup and typically  runs	the  .xsession
       script  in  the user's home directory.  When the	Xsession script	exits,
       the session is over.

       At the end of the session, the Xreset script is run to clean up,	the  X
       server is reset,	and the	cycle starts over.

       The  file   /var/log/xdm.log  will  contain error messages from xdm and
       anything	output to stderr by  Xsetup,  Xstartup,	 Xsession  or  Xreset.
       When  you  have	trouble	getting	xdm working, check this	file to	see if
       xdm has any clues to the	trouble.

OPTIONS
       All of these options, except -config itself, specify  values  that  can
       also be specified in the	configuration file as resources.

       -config configuration_file
	      Names  the configuration file, which specifies resources to con-
	      trol the behavior	of xdm.	 /usr/local/lib/X11/xdm/xdm-config  is
	      the default.  See	the section Configuration File.

       -nodaemon
	      Specifies	 ``false'' as the value	for the	DisplayManager.daemon-
	      Mode resource.  This  suppresses	the  normal  daemon  behavior,
	      which is for xdm to close	all file descriptors, disassociate it-
	      self from	the controlling	terminal, and put itself in the	 back-
	      ground when it first starts up.

       -debug debug_level
	      Specifies	 the  numeric  value for the DisplayManager.debugLevel
	      resource.	 A non-zero value causes xdm to	print lots  of	debug-
	      ging  statements	to the terminal; it also disables the Display-
	      Manager.daemonMode resource, forcing xdm to  run	synchronously.
	      To interpret these debugging messages, a copy of the source code
	      for xdm is almost	a necessity.  No attempt has been made to  ra-
	      tionalize	or standardize the output.

       -error error_log_file
	      Specifies	 the  value  for  the  DisplayManager.errorLogFile re-
	      source.  This file contains errors from xdm as well as  anything
	      written to stderr	by the various scripts and programs run	during
	      the progress of the session.

       -resources resource_file
	      Specifies	the value for the  DisplayManager*resources  resource.
	      This  file  is loaded using xrdb(1) to specify configuration pa-
	      rameters for the authentication widget.

       -server server_entry
	      Specifies	the value  for	the  DisplayManager.servers  resource.
	      See  the section Local Server Specification for a	description of
	      this resource.

       -udpPort	port_number
	      Specifies	the value for the DisplayManager.requestPort resource.
	      This  sets  the port-number which	xdm will monitor for XDMCP re-
	      quests.  If set to 0, xdm	will not listen	for XDMCP  or  Chooser
	      requests.	 As XDMCP uses the registered well-known UDP port 177,
	      this resource should not be changed to a value other than	0, ex-
	      cept for debugging.

       -session	session_program
	      Specifies	 the  value  for  the DisplayManager*session resource.
	      This indicates the program to run	as the session after the  user
	      has logged in.

       -xrm resource_specification
	      Allows an	arbitrary resource to be specified, as in most X Tool-
	      kit applications.

RESOURCES
       At many stages the actions of xdm can be	controlled through the use  of
       its  configuration  file,  which	is in the X resource format.  Some re-
       sources modify the behavior of xdm on all displays, while others	modify
       its  behavior  on a single display.  Where actions relate to a specific
       display,	the display name is inserted into the  resource	 name  between
       ``DisplayManager'' and the final	resource name segment.

       For  local  displays,  the resource name	and class are as read from the
       Xservers	file.

       For remote displays, the	resource name is what the network  address  of
       the display resolves to.	 See the removeDomain resource.	 The name must
       match exactly; xdm is not aware of all the network aliases  that	 might
       reach a given display.  If the name resolve fails, the address is used.
       The resource class is as	sent by	the display in the  XDMCP  Manage  re-
       quest.

       Because	the  resource  manager uses colons to separate the name	of the
       resource	from its value and dots	to separate resource name  parts,  xdm
       substitutes  underscores	 for  both dots	and colons when	generating the
       resource	name.  For example, DisplayManager.expo_x_org_0.startup	is the
       name  of	 the  resource	which  defines	the startup shell file for the
       ``expo.x.org:0''	display.

       DisplayManager.servers
	      This resource either specifies a file name full  of  server  en-
	      tries,  one  per	line  (if the value starts with	a slash), or a
	      single server entry.  See	the section Local Server Specification
	      for the details.

       DisplayManager.requestPort
	      This  indicates the UDP port number which	xdm uses to listen for
	      incoming XDMCP requests.	Unless you need	to debug  the  system,
	      leave this with its default value	of 177.

       DisplayManager.errorLogFile
	      Error output is normally directed	at the system console.	To re-
	      direct it, set this resource to a	file name.  A method  to  send
	      these  messages  to syslog should	be developed for systems which
	      support it; however, the wide variety  of	 interfaces  precludes
	      any  system-independent implementation.  This file also contains
	      any output directed to stderr by the Xsetup, Xstartup,  Xsession
	      and Xreset files,	so it will contain descriptions	of problems in
	      those scripts as well.

       DisplayManager.debugLevel
	      If the integer value of this  resource  is  greater  than	 zero,
	      reams  of	 debugging  information	will be	printed.  It also dis-
	      ables daemon mode, which would redirect the information into the
	      bit-bucket,  and	allows	non-root users to run xdm, which would
	      normally not be useful.

       DisplayManager.daemonMode
	      Normally,	xdm attempts to	make  itself  into  a  daemon  process
	      unassociated with	any terminal.  This is accomplished by forking
	      and leaving the parent process to	exit, then  closing  file  de-
	      scriptors	and releasing the controlling terminal.	 In some envi-
	      ronments this is not desired (in	particular,  when  debugging).
	      Setting this resource to ``false'' will disable this feature.

       DisplayManager.pidFile
	      The  filename specified will be created to contain an ASCII rep-
	      resentation of the process-id of the main	xdm process.  Xdm also
	      uses  file locking on this file to attempt to eliminate multiple
	      daemons running on the same machine, which would cause  quite  a
	      bit of havoc.

       DisplayManager.lockPidFile
	      This  is the resource which controls whether xdm uses file lock-
	      ing to keep multiple display managers  from  running  amok.   On
	      System V,	this uses the lockf library call, while	on BSD it uses
	      flock.

       DisplayManager.authDir
	      This names a directory  under  which  xdm	 stores	 authorization
	      files  while  initializing  the  session.	  The default value is
	      /var/lib/xdm.  Can be overridden for specific displays  by  Dis-
	      playManager.DISPLAY.authFile.

       DisplayManager.autoRescan
	      This  boolean  controls  whether	xdm rescans the	configuration,
	      servers, access control and authentication keys  files  after  a
	      session terminates and the files have changed.  By default it is
	      ``true.''	 You can force xdm to reread these files by sending  a
	      SIGHUP to	the main process.

       DisplayManager.removeDomainname
	      When  computing the display name for XDMCP clients, the name re-
	      solver will typically create a fully qualified host name for the
	      terminal.	  As  this is sometimes	confusing, xdm will remove the
	      domain name portion of the host name if it is the	 same  as  the
	      domain name of the local host when this variable is set.	By de-
	      fault the	value is ``true.''

       DisplayManager.keyFile
	      XDM-AUTHENTICATION-1 style XDMCP authentication requires that  a
	      private  key  be	shared between xdm and the terminal.  This re-
	      source specifies the file	containing those values.   Each	 entry
	      in  the  file consists of	a display name and the shared key.  By
	      default, xdm does	not include support for	 XDM-AUTHENTICATION-1,
	      as  it requires DES which	is not generally distributable because
	      of United	States export restrictions.

       DisplayManager.accessFile
	      To prevent unauthorized XDMCP service and	to allow forwarding of
	      XDMCP  IndirectQuery  requests, this file	contains a database of
	      hostnames	which are either allowed direct	 access	 to  this  ma-
	      chine,  or  have a list of hosts to which	queries	should be for-
	      warded to.  The format of	this file is described in the  section
	      XDMCP Access Control.

       DisplayManager.exportList
	      A	 list  of additional environment variables, separated by white
	      space, to	pass on	to the Xsetup, Xstartup, Xsession, and	Xreset
	      programs.

       DisplayManager.randomDevice
	      A	 file  to read 8 bytes from to generate	the seed of authoriza-
	      tion keys.  The default is  /dev/urandom . If this  file	cannot
	      be  read,	or if a	read blocks for	more than 5 seconds, xdm falls
	      back to using a checksum of DisplayManager.randomFile to	gener-
	      ate the seed.

       DisplayManager.greeterLib
	      On  systems that support a dynamically-loadable greeter library,
	      the name of the library.	The default is
	       /usr/local/lib/X11/xdm/libXdmGreet.so.

       DisplayManager.choiceTimeout
	      Number of	seconds	to wait	for display to respond after user  has
	      selected a host from the chooser.	 If the	display	sends an XDMCP
	      IndirectQuery within this	time, the request is forwarded to  the
	      chosen  host.  Otherwise,	it is assumed to be from a new session
	      and the chooser is offered again.	 Default is 15.

       DisplayManager.sourceAddress
	      Use the numeric IP address of the	incoming connection on	multi-
	      homed hosts instead of the host name. This is to avoid trying to
	      connect on the wrong interface which might be down at this time.

       DisplayManager.willing
	      This specifies a program which is	run (as) root when an an XDMCP
	      BroadcastQuery  is received and this host	is configured to offer
	      XDMCP display management.	The output of this program may be dis-
	      played  on  a  chooser  window.  If no program is	specified, the
	      string Willing to	manage is sent.

       DisplayManager.DISPLAY.resources
	      This resource specifies the name of the file  to	be  loaded  by
	      xrdb  as	the resource database onto the root window of screen 0
	      of the display.  The  Xsetup  program,  the  Login  widget,  and
	      chooser  will use	the resources set in this file.	 This resource
	      data base	is loaded just before the authentication procedure  is
	      started,	so  it can control the appearance of the login window.
	      See the section Authentication Widget, which describes the vari-
	      ous resources that are appropriate to place in this file.	 There
	      is no default value for this resource, but
	       /usr/local/lib/X11/xdm/Xresources is the	conventional name.

       DisplayManager.DISPLAY.chooser
	      Specifies	the program run	to offer  a  host  menu	 for  Indirect
	      queries redirected to the	special	host name CHOOSER.
	       /usr/local/lib/X11/xdm/chooser	is  the	default.  See the sec-
	      tions XDMCP Access Control and Chooser.

       DisplayManager.DISPLAY.xrdb
	      Specifies	the program used to load the resources.	  By  default,
	      xdm uses	/usr/local/bin/xrdb.

       DisplayManager.DISPLAY.cpp
	      This  specifies  the name	of the C preprocessor which is used by
	      xrdb.

       DisplayManager.DISPLAY.setup
	      This specifies a program which is	run (as	root) before  offering
	      the  Login window.  This may be used to change the appearance of
	      the screen around	the Login window or to put  up	other  windows
	      (e.g.,  you may want to run xconsole here).  By default, no pro-
	      gram is run.  The	conventional name for  a  file	used  here  is
	      Xsetup.  See the section Setup Program.

       DisplayManager.DISPLAY.startup
	      This  specifies  a  program which	is run (as root) after the au-
	      thentication process succeeds.  By default, no program  is  run.
	      The conventional name for	a file used here is Xstartup.  See the
	      section Startup Program.

       DisplayManager.DISPLAY.session
	      This specifies the session to be executed	(not running as	root).
	      By default,  /usr/local/bin/xterm	is run.	 The conventional name
	      is Xsession.  See	the section Session Program.

       DisplayManager.DISPLAY.reset
	      This specifies a program which is	run (as	root) after  the  ses-
	      sion  terminates.	  By  default, no program is run.  The conven-
	      tional name is Xreset.  See the section Reset Program.

       DisplayManager.DISPLAY.openDelay

       DisplayManager.DISPLAY.openRepeat

       DisplayManager.DISPLAY.openTimeout

       DisplayManager.DISPLAY.startAttempts

       DisplayManager.DISPLAY.reservAttempts
	      These numeric resources control the behavior  of	xdm  when  at-
	      tempting	to open	intransigent servers.  openDelay is the	length
	      of the pause in seconds between successive attempts,  openRepeat
	      is  the number of	attempts to make, openTimeout is the amount of
	      time to wait while actually attempting the open (i.e., the maxi-
	      mum  time	spent in the connect(2)	system call) and startAttempts
	      is the number of times this entire process is done before	giving
	      up  on the server.  After	openRepeat attempts have been made, or
	      if openTimeout seconds elapse in	any  particular	 attempt,  xdm
	      terminates and restarts the server, attempting to	connect	again.
	      This process is repeated startAttempts times, at which point the
	      display  is  declared dead and disabled.	Although this behavior
	      may seem arbitrary, it has been empirically developed and	 works
	      quite  well  on  most  systems.  The bound reservAttempts	is the
	      number of	times a	successful connect is allowed to  be  followed
	      by  a  fatal error.  When	reached, the display is	disabled.  The
	      default values are openDelay: 15,	 openRepeat:  5,  openTimeout:
	      120, startAttempts: 4 and	reservAttempts:	2.

       DisplayManager.DISPLAY.pingInterval

       DisplayManager.DISPLAY.pingTimeout
	      To  discover  when  remote  displays disappear, xdm occasionally
	      pings them, using	an X connection	and XSync calls.  pingInterval
	      specifies	the time (in minutes) between each ping	attempt, ping-
	      Timeout specifies	the maximum amount of  time  (in  minutes)  to
	      wait  for	the terminal to	respond	to the request.	 If the	termi-
	      nal does not respond, the	session	is declared  dead  and	termi-
	      nated.   By  default,  both  are	set to 5 minutes.  If you fre-
	      quently use X terminals which can	become isolated	from the  man-
	      aging host, you may wish to increase this	value.	The only worry
	      is that sessions will continue to	exist after the	 terminal  has
	      been  accidentally  disabled.  xdm will not ping local displays.
	      Although it would	seem harmless, it is unpleasant	when the work-
	      station  session is terminated as	a result of the	server hanging
	      for NFS service and not responding to the	ping.

       DisplayManager.DISPLAY.terminateServer
	      This boolean resource specifies whether the X server  should  be
	      terminated  when a session terminates (instead of	resetting it).
	      This option can be used when the server tends  to	 grow  without
	      bound over time, in order	to limit the amount of time the	server
	      is run.  The default value is ``false.''

       DisplayManager.DISPLAY.userPath
	      Xdm sets the PATH	environment variable for the session  to  this
	      value.   It should be a colon separated list of directories; see
	      sh(1)  for  a  full   description.    The	  default   value   is
	      ``/bin:/usr/bin:/sbin:/usr/sbin:/usr/lo-
	      cal/bin:/usr/gnu/bin:/usr/local/bin''.

       DisplayManager.DISPLAY.systemPath
	      Xdm sets the PATH	environment variable for the startup and reset
	      scripts to the value of this resource.  The default for this re-
	      source   is    ``/bin:/usr/bin:/sbin:/usr/sbin:/usr/local/bin''.
	      Note the absence of ``.''	from this entry.  This is a good prac-
	      tice to follow for root; it avoids many common Trojan Horse sys-
	      tem penetration schemes.

       DisplayManager.DISPLAY.systemShell
	      Xdm  sets	the SHELL environment variable for the startup and re-
	      set scripts to the value of this resource.  It is	/bin/sh	by de-
	      fault.

       DisplayManager.DISPLAY.failsafeClient
	      If  the  default session fails to	execute, xdm will fall back to
	      this program.  This program is executed with no  arguments,  but
	      executes	using  the  same  environment variables	as the session
	      would have had (see the section Session Program).	  By  default,
	      /usr/local/bin/xterm is used.

       DisplayManager.DISPLAY.grabServer

       DisplayManager.DISPLAY.grabTimeout
	      To  improve  security,  xdm  grabs the server and	keyboard while
	      reading the login	name and password.   The  grabServer  resource
	      specifies	 if  the server	should be held for the duration	of the
	      name/password reading.  When ``false,'' the server is  ungrabbed
	      after  the  keyboard  grab  succeeds,  otherwise	the  server is
	      grabbed until just before	the session begins.   The  default  is
	      ``false.''   The grabTimeout resource specifies the maximum time
	      xdm will wait for	the grab to succeed.  The  grab	 may  fail  if
	      some  other  client  has	the server grabbed, or possibly	if the
	      network latencies	are very high.	This resource  has  a  default
	      value of 3 seconds; you should be	cautious when raising it, as a
	      user can be spoofed by a look-alike window on the	 display.   If
	      the  grab	fails, xdm kills and restarts the server (if possible)
	      and the session.

       DisplayManager.DISPLAY.authorize

       DisplayManager.DISPLAY.authName
	      authorize	is a boolean resource which controls whether xdm  gen-
	      erates  and uses authorization for the local server connections.
	      If authorization is used,	authName is a  list  of	 authorization
	      mechanisms  to use, separated by white space.  XDMCP connections
	      dynamically specify  which  authorization	 mechanisms  are  sup-
	      ported,  so authName is ignored in this case.  When authorize is
	      set for a	display	and authorization is not available,  the  user
	      is informed by having a different	message	displayed in the login
	      widget.  By default, authorize is	``true,''  authName is	``MIT-
	      MAGIC-COOKIE-1,''	  or,  if  XDM-AUTHORIZATION-1	is  available,
	      ``XDM-AUTHORIZATION-1 MIT-MAGIC-COOKIE-1.''

       DisplayManager.DISPLAY.authFile
	      This file	is used	to communicate the authorization data from xdm
	      to  the  server, using the -auth server command line option.  It
	      should be	kept in	a directory which is not world-writable	as  it
	      could  easily  be	removed, disabling the authorization mechanism
	      in the server.  If not specified,	a name is generated from  Dis-
	      playManager.authDir and the name of the display.

       DisplayManager.DISPLAY.authComplain
	      If set to	``false,'' disables the	use of the unsecureGreeting in
	      the login	window.	 See the section Authentication	 Widget.   The
	      default is ``true.''

       DisplayManager.DISPLAY.resetSignal
	      The number of the	signal xdm sends to reset the server.  See the
	      section Controlling the Server.  The default is 1	(SIGHUP).

       DisplayManager.DISPLAY.termSignal
	      The number of the	signal xdm sends to terminate the server.  See
	      the   section   Controlling  the	Server.	  The  default	is  15
	      (SIGTERM).

       DisplayManager.DISPLAY.resetForAuth
	      The original  implementation  of	authorization  in  the	sample
	      server  reread  the authorization	file at	server reset time, in-
	      stead of when checking the initial connection.  As xdm generates
	      the authorization	information just before	connecting to the dis-
	      play, an old server would	not get	up-to-date  authorization  in-
	      formation.   This	 resource  causes  xdm	to  send SIGHUP	to the
	      server after setting up the file,	causing	an  additional	server
	      reset to occur, during which time	the new	authorization informa-
	      tion will	be read.  The default is ``false,''  which  will  work
	      for all MIT servers.

       DisplayManager.DISPLAY.userAuthDir
	      When xdm is unable to write to the usual user authorization file
	      ($HOME/.Xauthority), it creates a	unique file name in  this  di-
	      rectory  and  points  the	environment variable XAUTHORITY	at the
	      created file.  It	uses /tmp by default.

CONFIGURATION FILE
       First, the xdm configuration file should	be set up.  Make  a  directory
       (usually	 /usr/local/lib/X11/xdm) to contain all	of the relevant	files.

       Here  is	a reasonable configuration file, which could be	named xdm-con-
       fig:

	    DisplayManager.servers:	       /usr/local/lib/X11/xdm/Xservers
	    DisplayManager.errorLogFile:       /var/log/xdm.log
	    DisplayManager*resources:	       /usr/local/lib/X11/xdm/Xresources
	    DisplayManager*startup:	       /usr/local/lib/X11/xdm/Xstartup
	    DisplayManager*session:	       /usr/local/lib/X11/xdm/Xsession
	    DisplayManager.pidFile:	       /var/run/xdm-pid
	    DisplayManager._0.authorize:       true
	    DisplayManager*authorize:	       false

       Note that this file mostly contains references to  other	 files.	  Note
       also that some of the resources are specified with ``*''	separating the
       components.  These resources can	be made	unique for each	different dis-
       play,  by  replacing the	``*'' with the display-name, but normally this
       is not very useful.  See	the Resources section for a  complete  discus-
       sion.

XDMCP ACCESS CONTROL
       The  database  file specified by	the DisplayManager.accessFile provides
       information which xdm uses to control access from  displays  requesting
       XDMCP  service.	 This  file  contains three types of entries:  entries
       which control the response to Direct  and  Broadcast  queries,  entries
       which control the response to Indirect queries, and macro definitions.

       The  format  of	the  Direct entries is simple, either a	host name or a
       pattern,	which is distinguished from a host name	by  the	 inclusion  of
       one  or	more  meta  characters	(`*' matches any sequence of 0 or more
       characters, and `?' matches any single character)  which	 are  compared
       against	the  host  name	of the display device.	If the entry is	a host
       name, all comparisons are done using network  addresses,	 so  any  name
       which  converts	to  the	correct	network	address	may be used.  For pat-
       terns, only canonical host names	are used in the	comparison, so	ensure
       that you	do not attempt to match	aliases.  Preceding either a host name
       or a pattern with a `!' character causes	hosts which match  that	 entry
       to be excluded.

       To only respond to Direct queries for a host or pattern,	it can be fol-
       lowed by	the optional ``NOBROADCAST'' keyword.  This  can  be  used  to
       prevent	an  xdm	 server	 from  appearing  on  menus based on Broadcast
       queries.

       An Indirect entry also contains a host name or pattern, but follows  it
       with a list of host names or macros to which indirect queries should be
       sent.

       A macro definition contains a macro name	and a list of host  names  and
       other  macros  that  the	 macro expands to.  To distinguish macros from
       hostnames, macro	names start with  a  `%'  character.   Macros  may  be
       nested.

       Indirect	 entries  may  also specify to have xdm	run chooser to offer a
       menu of hosts to	connect	to.  See the section Chooser.

       When checking access for	a  particular  display	host,  each  entry  is
       scanned	in  turn and the first matching	entry determines the response.
       Direct and Broadcast entries are	ignored	when scanning for an  Indirect
       entry and vice-versa.

       Blank  lines are	ignored, `#' is	treated	as a comment delimiter causing
       the rest	of that	line to	be ignored, and	`\newline' causes the  newline
       to be ignored, allowing indirect	host lists to span multiple lines.

       Here is an example Xaccess file:

       #
       # Xaccess - XDMCP access	control	file
       #

       #
       # Direct/Broadcast query	entries
       #

       !xtra.lcs.mit.edu   # disallow direct/broadcast service for xtra
       bambi.ogi.edu	   # allow access from this particular display
       *.lcs.mit.edu	   # allow access from any display in LCS

       *.deshaw.com	   NOBROADCAST	       # allow only direct access
       *.gw.com				       # allow direct and broadcast

       #
       # Indirect query	entries
       #

       %HOSTS		   expo.lcs.mit.edu xenon.lcs.mit.edu \
			   excess.lcs.mit.edu kanga.lcs.mit.edu

       extract.lcs.mit.edu xenon.lcs.mit.edu   #force extract to contact xenon
       !xtra.lcs.mit.edu   dummy	       #disallow indirect access
       *.lcs.mit.edu	   %HOSTS	       #all others get to choose

       If compiled with	IPv6 support, multicast	address	groups may also	be in-
       cluded in the list of addresses indirect	queries	are set	to.  Multicast
       addresses  may be followed by an	optional / character and hop count. If
       no hop count is specified, the multicast	hop count defaults to 1, keep-
       ing  the	 packet	 on  the local network.	For IPv4 multicasting, the hop
       count is	used as	the TTL.

       Examples:

       rincewind.sample.net ff02::1		    #IPv6 Multicast to ff02::1
						    #with a hop	count of 1
       ponder.sample.net    CHOOSER 239.192.1.1/16  #Offer a menu of hosts
						    #who respond to IPv4 Multicast
						    # to 239.192.1.1 with a TTL	of 16

CHOOSER
       For X terminals that do not offer a host	menu for use with Broadcast or
       Indirect	 queries,  the	chooser	 program can do	this for them.	In the
       Xaccess file, specify ``CHOOSER'' as the	first entry  in	 the  Indirect
       host  list.  Chooser will send a	Query request to each of the remaining
       host names in the list and offer	a menu of all the hosts	that respond.

       The list	may consist of the word	``BROADCAST,'' in which	 case  chooser
       will  send a Broadcast instead, again offering a	menu of	all hosts that
       respond.	 Note that on some operating systems, UDP  packets  cannot  be
       broadcast, so this feature will not work.

       Example Xaccess file using chooser:

       extract.lcs.mit.edu  CHOOSER %HOSTS	    #offer a menu of these hosts
       xtra.lcs.mit.edu	    CHOOSER BROADCAST	    #offer a menu of all hosts

       The  program to use for chooser is specified by the DisplayManager.DIS-
       PLAY.chooser resource.  For more	flexibility at this step, the  chooser
       could  be  a  shell script.  Chooser is the session manager here; it is
       run instead of a	child xdm to manage the	display.

       Resources for this program can be put into the file named  by  Display-
       Manager.DISPLAY.resources.

       When  the user selects a	host, chooser prints the host chosen, which is
       read by the parent xdm, and exits.  xdm closes its connection to	the  X
       server, and the server resets and sends another Indirect	XDMCP request.
       xdm remembers the user's	choice (for DisplayManager.choiceTimeout  sec-
       onds)  and forwards the request to the chosen host, which starts	a ses-
       sion on that display.

LISTEN
       The following configuration directive is	also defined for  the  Xaccess
       configuration file:

       LISTEN interface	[list of multicast group addresses]
	      interface	may be a hostname or IP	address	representing a network
	      interface	on this	machine, or the	wildcard *  to	represent  all
	      available	network	interfaces.

       If  one	or more	LISTEN lines are specified, xdm	only listens for XDMCP
       connections on the specified interfaces.	If multicast  group  addresses
       are  listed  on	a  listen  line, xdm joins the multicast groups	on the
       given interface.

       If no LISTEN lines are given, the original behavior of listening	on all
       interfaces  is preserved	for backwards compatibility.  Additionally, if
       no LISTEN is specified, xdm joins  the  default	XDMCP  IPv6  multicast
       group, when compiled with IPv6 support.

       To  disable listening for XDMCP connections altogther, a	line of	LISTEN
       with no addresses may be	specified, or the previously supported	method
       of setting DisplayManager.requestPort to	0 may be used.

       Examples:
       LISTEN *	ff02::1	   # Listen on all interfaces and to the
			   # ff02::1 IPv6 multicast group.
       LISTEN 10.11.12.13  # Listen only on this interface, as long
			   # as	no other listen	directives appear in
			   # file.

IPv6 MULTICAST ADDRESS SPECIFICATION
       The    Internet	 Assigned   Numbers   Authority	  has	has   assigned
       ff0X:0:0:0:0:0:0:12b as the permanently assigned	range of multicast ad-
       dresses	for  XDMCP.  The  X in the prefix may be replaced by any valid
       scope identifier, such as 1 for Interface-Local,	2  for	Link-Local,  5
       for  Site-Local,	 and so	on.  (See IETF RFC 4291	or its replacement for
       further details and scope definitions.)	xdm defaults to	 listening  on
       the Link-Local scope address ff02:0:0:0:0:0:0:12b to most closely match
       the old IPv4 subnet broadcast behavior.

LOCAL SERVER SPECIFICATION
       The resource DisplayManager.servers gives a server specification	or, if
       the  values  starts  with  a  slash  (/), the name of a file containing
       server specifications, one per line.

       Each specification indicates a display which should constantly be  man-
       aged  and  which	is not using XDMCP.  This method is used typically for
       local servers only.  If the resource or the file	named by the  resource
       is empty, xdm will offer	XDMCP service only.

       Each specification consists of at least three parts:  a display name, a
       display class, a	display	type, and (for local servers) a	 command  line
       to  start the server.  A	typical	entry for local	display	number 0 would
       be:

	 :0 Digital-QV local /usr/local/bin/X :0

       The display types are:

       local	 local display:	xdm must run the server
       foreign	 remote	display: xdm opens an X	connection to a	running	server

       The display name	must be	something that can be passed in	 the  -display
       option  to  an X	program.  This string is used to generate the display-
       specific	resource names,	so be careful to match the  names  (e.g.,  use
       ``:0  Sun-CG3 local /usr/local/bin/X :0'' instead of ``localhost:0 Sun-
       CG3 local /usr/local/bin/X :0'' if your other resources	are  specified
       as  ``DisplayManager._0.session'').   The display class portion is also
       used in the display-specific resources, as the class of	the  resource.
       This is useful if you have a large collection of	similar	displays (such
       as a corral of X	terminals) and would like to set resources for	groups
       of them.	 When using XDMCP, the display is required to specify the dis-
       play class, so the manual for your particular X terminal	 should	 docu-
       ment  the display class string for your device.	If it doesn't, you can
       run xdm in debug	mode and look at the resource strings which it	gener-
       ates for	that device, which will	include	the class string.

       When  xdm  starts  a  session,  it  sets	 up authorization data for the
       server.	For local  servers,  xdm  passes  ``-auth  filename''  on  the
       server's	command	line to	point it at its	authorization data.  For XDMCP
       servers,	xdm passes the authorization data to the server	via the	Accept
       XDMCP request.

RESOURCES FILE
       The  Xresources	file is	loaded onto the	display	as a resource database
       using xrdb.  As the authentication widget reads	this  database	before
       starting	up, it usually contains	parameters for that widget:

	    xlogin*login.translations: #override\
		 Ctrl<Key>R: abort-display()\n\
		 <Key>F1: set-session-argument(failsafe) finish-field()\n\
		 <Key>Return: set-session-argument() finish-field()
	    xlogin*borderWidth:	3
	    xlogin*greeting: CLIENTHOST
	    #ifdef COLOR
	    xlogin*greetColor: CadetBlue
	    xlogin*failColor: red
	    #endif

       Please note the translations entry; it specifies	a few new translations
       for the widget which allow users	to escape  from	 the  default  session
       (and  avoid  troubles that may occur in it).  Note that if #override is
       not specified, the default translations are removed and replaced	by the
       new value, not a	very useful result as some of the default translations
       are quite useful	(such as ``<Key>: insert-char ()'' which  responds  to
       normal typing).

       This file may also contain resources for	the setup program and chooser.

SETUP PROGRAM
       The  Xsetup file	is run after the server	is reset, but before the Login
       window is offered.  The file is typically a shell script.  It is	run as
       root, so	should be careful about	security.  This	is the place to	change
       the root	background or bring up other windows that should appear	on the
       screen along with the Login widget.

       In  addition to any specified by	DisplayManager.exportList, the follow-
       ing environment variables are passed:

	    DISPLAY	   the associated display name
	    PATH	   the value of	DisplayManager.DISPLAY.systemPath
	    SHELL	   the value of	DisplayManager.DISPLAY.systemShell
	    XAUTHORITY	   may be set to an authority file

       Note that since xdm grabs the keyboard, any other windows will  not  be
       able to receive keyboard	input.	They will be able to interact with the
       mouse, however; beware of potential security holes here.	  If  Display-
       Manager.DISPLAY.grabServer  is  set, Xsetup will	not be able to connect
       to the display at all.  Resources for this program can be put into  the
       file named by DisplayManager.DISPLAY.resources.

       Here is a sample	Xsetup script:

	    #!/bin/sh
	    # Xsetup_0 - setup script for one workstation
	    xcmsdb < /usr/local/lib/X11/xdm/monitors/alex.0
	    xconsole -geometry 480x130-0-0 -notify -verbose -exitOnFail	&

AUTHENTICATION WIDGET
       The  authentication widget prompts the user for the username, password,
       and/or other required authentication data from  the  keyboard.	Nearly
       every  imaginable  parameter  can  be  controlled with a	resource.  Re-
       sources for this	widget should be put into the file named  by  Display-
       Manager.DISPLAY.resources.   All	 of these have reasonable default val-
       ues, so it is not necessary to specify any of them.

       The resource file is loaded with	xrdb(1)	so it may  use	the  substitu-
       tions  defined  by that program such as CLIENTHOST for the client host-
       name in the login message, or C pre-processor #ifdef statements to pro-
       duce different displays depending on color depth	or other variables.

       Xdm  can	 be compiled with support for the Xft(3) library for font ren-
       dering.	 If this support is present, font faces	 are  specified	 using
       the resources with names	ending in ``face'' in the fontconfig face for-
       mat described in	the Font Names section of fonts.conf(5).  If not, then
       fonts  are  specified using the resources with names ending in ``font''
       in the traditional X Logical Font Description format described  in  the
       Font Names section of X(7).

       xlogin.Login.width, xlogin.Login.height,	xlogin.Login.x,	xlogin.Login.y
	      The  geometry of the Login widget	is normally computed automati-
	      cally.  If you wish to position it elsewhere,  specify  each  of
	      these resources.

       xlogin.Login.foreground
	      The color	used to	display	the input typed	by the user.

       xlogin.Login.face
	      The  face	used to	display	the input typed	by the user when built
	      with Xft support.	 The default is	``Serif-18''.

       xlogin.Login.font
	      The font used to display the input typed by the  user  when  not
	      built with Xft support.

       xlogin.Login.greeting
	      A	 string	which identifies this window.  The default is ``X Win-
	      dow System.''

       xlogin.Login.unsecureGreeting
	      When X authorization is requested	in the configuration file  for
	      this  display  and  none	is  in use, this greeting replaces the
	      standard greeting.  The default is ``This	is  an	unsecure  ses-
	      sion''

       xlogin.Login.greetFace
	      The  face	 used to display the greeting when built with Xft sup-
	      port.  The default is ``Serif-24:italic''.

       xlogin.Login.greetFont
	      The font used to display the greeting when not  built  with  Xft
	      support.

       xlogin.Login.greetColor
	      The color	used to	display	the greeting.

       xlogin.Login.namePrompt
	      The  string  displayed  to  prompt for a user name.  Xrdb	strips
	      trailing white space from	resource values, so to add  spaces  at
	      the end of the prompt (usually a nice thing), add	spaces escaped
	      with backslashes.	 The default is	``Login:  ''

       xlogin.Login.passwdPrompt
	      The string displayed to prompt for a password, when not using an
	      authentication system such as PAM	that provides its own prompts.
	      The default is ``Password:  ''

       xlogin.Login.promptFace
	      The face used to display prompts when built  with	 Xft  support.
	      The default is ``Serif-18:bold''.

       xlogin.Login.promptFont
	      The  font	 used  to display prompts when not built with Xft sup-
	      port.

       xlogin.Login.promptColor
	      The color	used to	display	prompts.

       xlogin.Login.changePasswdMessage
	      A	message	which is displayed when	the  users  password  has  ex-
	      pired.  The default is ``Password	Change Required''

       xlogin.Login.fail
	      A	message	which is displayed when	the authentication fails, when
	      not using	an authentication system such as PAM that provides its
	      own prompts.  The	default	is ``Login incorrect''

       xlogin.Login.failFace
	      The face used to display the failure message when	built with Xft
	      support.	The default is ``Serif-18:bold''.

       xlogin.Login.failFont
	      The font used to display the failure message when	not built with
	      Xft support.

       xlogin.Login.failColor
	      The color	used to	display	the failure message.

       xlogin.Login.failTimeout
	      The  number  of  seconds	that the failure message is displayed.
	      The default is 10.

       xlogin.Login.logoFileName
	      Name of an XPM format pixmap to display in the  greeter  window,
	      if built with XPM	support.   The default is no pixmap.

       xlogin.Login.logoPadding
	      Number of	pixels of space	between	the logo pixmap	and other ele-
	      ments of the greeter window, if the pixmap  is  displayed.   The
	      default is 5.

       xlogin.Login.useShape
	      If  set to ``true'', when	built with XPM support,	attempt	to use
	      the X Non-Rectangular Window Shape Extension to set  the	window
	      shape.  The default is ``true''.

       xlogin.Login.hiColor, xlogin.Login.shdColor
	      Raised  appearance  bezels may be	drawn around the greeter frame
	      and text input boxes by setting these resources.	hiColor	is the
	      highlight	 color,	 used  on the top and left sides of the	frame,
	      and the bottom and right sides of	text input  areas.    shdColor
	      is  the  shadow color, used on the bottom	and right sides	of the
	      frame, and the top and left sides	of text	input areas.  The  de-
	      fault for	both is	the foreground color, providing	a flat appear-
	      ance.

       xlogin.Login.frameWidth
	      frameWidth is the	width in pixels	of the area around the greeter
	      frame drawn in hiColor and shdColor.

       xlogin.Login.innerFramesWidth
	      innerFramesWidth	is the width in	pixels of the area around text
	      input areas drawn	in hiColor and shdColor.

       xlogin.Login.sepWidth
	      sepWidth is the width in pixels of the bezeled line between  the
	      greeting and input areas drawn in	hiColor	and shdColor.

       xlogin.Login.allowRootLogin
	      If  set  to ``false'', don't allow root (and any other user with
	      uid = 0) to log in directly.  The	 default  is  ``true''.	  This
	      setting  is  only	checked	by some	of the authentication backends
	      at this time.

       xlogin.Login.allowNullPasswd
	      If set to	``true'', allow	an otherwise failing password match to
	      succeed  if the account does not require a password at all.  The
	      default is ``false'', so only users that have passwords assigned
	      can log in.

       xlogin.Login.echoPasswd
	      If  set  to  ``true'',  a	placeholder character (echoPasswdChar)
	      will be shown for	fields normally	set to not echo, such as pass-
	      word input.  The default is ``false''.

       xlogin.Login.echoPasswdChar
	      Character	 to  display  if  echoPasswd  is true.	The default is
	      ``*''.  If set to	an empty value,	the cursor  will  advance  for
	      each character input, but	no text	will be	drawn.

       xlogin.Login.translations
	      This  specifies the translations used for	the login widget.  Re-
	      fer to the X Toolkit documentation for a complete	discussion  on
	      translations.  The default translation table is:

		   Ctrl<Key>H:	  delete-previous-character() \n\
		   Ctrl<Key>D:	  delete-character() \n\
		   Ctrl<Key>B:	  move-backward-character() \n\
		   Ctrl<Key>F:	  move-forward-character() \n\
		   Ctrl<Key>A:	  move-to-begining() \n\
		   Ctrl<Key>E:	  move-to-end()	\n\
		   Ctrl<Key>K:	  erase-to-end-of-line() \n\
		   Ctrl<Key>U:	  erase-line() \n\
		   Ctrl<Key>X:	  erase-line() \n\
		   Ctrl<Key>C:	  restart-session() \n\
		   Ctrl<Key>\\:	  abort-session() \n\
		   <Key>BackSpace:delete-previous-character() \n\
		   <Key>Delete:	  delete-previous-character() \n\
		   <Key>Return:	  finish-field() \n\
		   <Key>:	  insert-char()	\

       The actions which are supported by the widget are:

       delete-previous-character
	      Erases the character before the cursor.

       delete-character
	      Erases the character after the cursor.

       move-backward-character
	      Moves the	cursor backward.

       move-forward-character
	      Moves the	cursor forward.

       move-to-begining
	      (Apologies  about	 the spelling error.)  Moves the cursor	to the
	      beginning	of the editable	text.

       move-to-end
	      Moves the	cursor to the end of the editable text.

       erase-to-end-of-line
	      Erases all text after the	cursor.

       erase-line
	      Erases the entire	text.

       finish-field
	      If the cursor is in the name field,  proceeds  to	 the  password
	      field;  if  the cursor is	in the password	field, checks the cur-
	      rent name/password pair.	If the name/password  pair  is	valid,
	      xdm  starts  the session.	 Otherwise the failure message is dis-
	      played and the user is prompted again.

       abort-session
	      Terminates and restarts the server.

       abort-display
	      Terminates the server, disabling it.  This action	is not	acces-
	      sible  in	 the default configuration.  There are various reasons
	      to stop xdm on a system console, such as when shutting the  sys-
	      tem  down, when using xdmshell, to start another type of server,
	      or to generally access the console.  Sending xdm a  SIGHUP  will
	      restart the display.  See	the section Controlling	XDM.

       restart-session
	      Resets  the X server and starts a	new session.  This can be used
	      when the resources have been changed and you want	to  test  them
	      or when the screen has been overwritten with system messages.

       insert-char
	      Inserts the character typed.

       set-session-argument
	      Specifies	 a single word argument	which is passed	to the session
	      at startup.  See the section Session Program.

       allow-all-access
	      Disables access control in the server.  This can	be  used  when
	      the  .Xauthority file cannot be created by xdm.  Be very careful
	      using this; it might be better to	disconnect  the	 machine  from
	      the network before doing this.

       On   some  systems  (OpenBSD)  the  user's  shell  must	be  listed  in
       /etc/shells to allow login through xdm. The normal password and account
       expiration dates	are enforced too.

STARTUP	PROGRAM
       The Xstartup program is run as root when	the user logs in.  It is typi-
       cally a shell script.  Since it is run as root, Xstartup	should be very
       careful	about  security.   This	is the place to	put commands which add
       entries to utmp or wtmp files,  (the  sessreg  program  may  be	useful
       here),  mount  users'  home directories from file servers, or abort the
       session if logins are not allowed.

       In addition to any specified by DisplayManager.exportList, the  follow-
       ing environment variables are passed:

	    DISPLAY	   the associated display name
	    HOME	   the initial working directory of the	user
	    LOGNAME	   the user name
	    USER	   the user name
	    PATH	   the value of	DisplayManager.DISPLAY.systemPath
	    SHELL	   the value of	DisplayManager.DISPLAY.systemShell
	    XAUTHORITY	   may be set to an authority file
	    WINDOWPATH	   may be set to the "window path" leading to the X server

       No arguments are	passed to the script.  Xdm waits until this script ex-
       its before starting the user session.  If the exit value	of this	script
       is  non-zero, xdm discontinues the session and starts another authenti-
       cation cycle.

       The sample Xstartup file	shown  here  prevents  login  while  the  file
       /etc/nologin exists.  Thus this is not a	complete example, but simply a
       demonstration of	the available functionality.

       Here is a sample	Xstartup script:

	    #!/bin/sh
	    #
	    # Xstartup
	    #
	    # This program is run as root after	the user is verified
	    #
	    if [ -f /etc/nologin ]; then
		 xmessage -file	/etc/nologin -timeout 30 -center
		 exit 1
	    fi
	    sessreg -a -l $DISPLAY -x /usr/local/lib/X11/xdm/Xservers $LOGNAME
	    /usr/local/lib/X11/xdm/GiveConsole
	    exit 0

SESSION	PROGRAM
       The Xsession program is the command which is run	as the user's session.
       It is run with the permissions of the authorized	user.

       In  addition to any specified by	DisplayManager.exportList, the follow-
       ing environment variables are passed:

	    DISPLAY	   the associated display name
	    HOME	   the initial working directory of the	user
	    LOGNAME	   the user name
	    USER	   the user name
	    PATH	   the value of	DisplayManager.DISPLAY.userPath
	    SHELL	   the user's default shell (from getpwnam)
	    XAUTHORITY	   may be set to a non-standard	authority file
	    KRB5CCNAME	   may be set to a Kerberos credentials	cache name
	    WINDOWPATH	   may be set to the "window path" leading to the X server

       At most installations, Xsession should look in $HOME for	a file	.xses-
       sion,  which  contains  commands	 that each user	would like to use as a
       session.	 Xsession should also implement	a system default session if no
       user-specified session exists.

       An  argument may	be passed to this program from the authentication wid-
       get using the `set-session-argument' action.  This can be used  to  se-
       lect  different	styles of session.  One	good use of this feature is to
       allow the user to escape	from the ordinary session when it fails.  This
       allows users to repair their own	.xsession if it	fails, without requir-
       ing administrative intervention.	 The  example  following  demonstrates
       this feature.

       This example recognizes the special ``failsafe''	mode, specified	in the
       translations in the Xresources file, to provide an escape from the  or-
       dinary session.	It also	requires that the .xsession file be executable
       so we don't have	to guess what shell it wants to	use.

	    #!/bin/sh
	    #
	    # Xsession
	    #
	    # This is the program that is run as the client
	    # for the display manager.

	    case $# in
	    1)
		 case $1 in
		 failsafe)
		      exec xterm -geometry 80x24-0-0
		      ;;
		 esac
	    esac

	    startup=$HOME/.xsession
	    resources=$HOME/.Xresources

	    if [ -f "$startup" ]; then
		 exec "$startup"
	    else
		 if [ -f "$resources" ]; then
		      xrdb -load "$resources"
		 fi
		 twm &
		 xman -geometry	+10-10 &
		 exec xterm -geometry 80x24+10+10 -ls
	    fi

       The user's .xsession file  might	 look  something  like	this  example.
       Don't forget that the file must have execute permission.
	    #! /bin/csh
	    # no -f in the previous line so .cshrc gets	run to set $PATH
	    twm	&
	    xrdb -merge	"$HOME/.Xresources"
	    emacs -geometry +0+50 &
	    xbiff -geometry -430+5 &
	    xterm -geometry -0+50 -ls

RESET PROGRAM
       Symmetrical with	Xstartup, the Xreset script is run after the user ses-
       sion has	terminated.  Run as root, it should contain commands that undo
       the  effects  of	commands in Xstartup, updating entries in utmp or wtmp
       files, or unmounting directories	from file  servers.   The  environment
       variables that were passed to Xstartup are also passed to Xreset.

       A sample	Xreset script:
	    #!/bin/sh
	    #
	    # Xreset
	    #
	    # This program is run as root after	the session ends
	    #
	    sessreg -d -l $DISPLAY -x /usr/local/lib/X11/xdm/Xservers $LOGNAME
	    /usr/local/lib/X11/xdm/TakeConsole
	    exit 0

CONTROLLING THE	SERVER
       Xdm  controls local servers using POSIX signals.	 SIGHUP	is expected to
       reset the server, closing all client connections	and  performing	 other
       cleanup duties.	SIGTERM	is expected to terminate the server.  If these
       signals do not perform the expected actions, the	resources  DisplayMan-
       ager.DISPLAY.resetSignal	  and	DisplayManager.DISPLAY.termSignal  can
       specify alternate signals.

       To control remote terminals not using XDMCP, xdm	 searches  the	window
       hierarchy on the	display	and uses the protocol request KillClient in an
       attempt to clean	up the terminal	for the	next session.	This  may  not
       actually	kill all of the	clients, as only those which have created win-
       dows will be noticed.  XDMCP provides a more sure mechanism;  when  xdm
       closes  its initial connection, the session is over and the terminal is
       required	to close all other connections.

CONTROLLING XDM
       Xdm responds to two signals: SIGHUP and SIGTERM.	 When sent  a  SIGHUP,
       xdm  rereads  the  configuration	file, the access control file, and the
       servers file.  For the servers file, it notices if  entries  have  been
       added  or removed.  If a	new entry has been added, xdm starts a session
       on the associated display.  Entries which have been  removed  are  dis-
       abled  immediately, meaning that	any session in progress	will be	termi-
       nated without notice and	no new session will be started.

       When sent a SIGTERM, xdm	terminates all sessions	in progress and	exits.
       This can	be used	when shutting down the system.

       Xdm attempts to mark its	various	sub-processes for ps(1)	by editing the
       command line argument list in place.  Because xdm can't allocate	 addi-
       tional space for	this task, it is useful	to start xdm with a reasonably
       long command line (using	the full path name should  be  enough).	  Each
       process which is	servicing a display is marked -display.

ADDITIONAL LOCAL DISPLAYS
       To  add	an additional local display, add a line	for it to the Xservers
       file.  (See the section Local Server Specification.)

       Examine the display-specific resources in xdm-config (e.g., DisplayMan-
       ager._0.authorize)  and consider	which of them should be	copied for the
       new display.  The default xdm-config has	all the	appropriate lines  for
       displays	:0 and :1.

OTHER POSSIBILITIES
       You  can	 use xdm to run	a single session at a time, using the 4.3 init
       options or other	suitable daemon	by specifying the server on  the  com-
       mand line:

	    xdm	-server	":0 SUN-3/60CG4	local /usr/local/bin/X :0"

       Or,  you	might have a file server and a collection of X terminals.  The
       configuration for this is identical to the  sample  above,  except  the
       Xservers	file would look	like

	    extol:0 VISUAL-19 foreign
	    exalt:0 NCD-19 foreign
	    explode:0 NCR-TOWERVIEW3000	foreign

       This  directs  xdm  to manage sessions on all three of these terminals.
       See the section Controlling Xdm for a description of using  signals  to
       enable and disable these	terminals in a manner reminiscent of init(8).

LIMITATIONS
       One  thing  that	 xdm isn't very	good at	doing is coexisting with other
       window systems.	To use multiple	window systems on the  same  hardware,
       you'll probably be more interested in xinit.

FILES
       /usr/local/lib/X11/xdm/xdm-config
			   the default configuration file

       $HOME/.Xauthority   user	 authorization	file where xdm stores keys for
			   clients to read

       /usr/local/lib/X11/xdm/chooser
			   the default chooser

       /usr/local/bin/xrdb the default resource	database loader

       /usr/local/bin/X	   the default server

       /usr/local/bin/xterm
			   the default session program and failsafe client

       /var/lib/xdm/A_display_-_suffix_
			   the default place for authorization files

       /tmp/K5C_display_   Kerberos credentials	cache

SEE ALSO
       X(7),   xinit(1),   xauth(1),   xrdb(1),	  Xsecurity(7),	   sessreg(1),
       Xserver(1), xdmshell(1),	fonts.conf(5).
       X Display Manager Control Protocol
       IETF RFC	4291: IP Version 6 Addressing Architecture.

AUTHOR
       Keith Packard, MIT X Consortium

X Version 11			  xdm 1.1.11				XDM(1)

NAME | SYNOPSIS | DESCRIPTION | OVERVIEW | OPTIONS | RESOURCES | CONFIGURATION FILE | XDMCP ACCESS CONTROL | CHOOSER | LISTEN | IPv6 MULTICAST ADDRESS SPECIFICATION | LOCAL SERVER SPECIFICATION | RESOURCES FILE | SETUP PROGRAM | AUTHENTICATION WIDGET | STARTUP PROGRAM | SESSION PROGRAM | RESET PROGRAM | CONTROLLING THE SERVER | CONTROLLING XDM | ADDITIONAL LOCAL DISPLAYS | OTHER POSSIBILITIES | LIMITATIONS | FILES | SEE ALSO | AUTHOR

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=xdm&sektion=1&manpath=FreeBSD+10.1-RELEASE+and+Ports>

home | help