Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
WD(4)		       FreeBSD Kernel Interfaces Manual			 WD(4)

NAME
     wd	-- WD100x compatible hard disk driver

SYNOPSIS
     wd* at wdc? flags 0x0000
     wd* at pciide? flags 0x0000

DESCRIPTION
     The wd driver supports hard disks which emulate the Western Digital
     WD100x.  This includes standard MFM, RLL, ESDI, IDE, and EIDE drives, as
     well as Serial ATA	drives,	and PCMCIA/CF storage media.

     The flags are used	only with controllers that support DMA operations and
     mode settings (like some pciide(4)	controllers).  The lowest order
     (rightmost) nibble	of the flags define the	PIO mode to use.  The next
     four bits indicate	the DMA	mode and the third nibble the UltraDMA mode.

     For each set of four bits,	the 3 lower bits define	the mode to use	and
     the last bit must be set to 1 for this setting to be used.	 For DMA and
     UltraDMA, 0xf (1111) means	"disable".  For	example, a flags value of
     0x0fac (1111 1010 1100) means "use	PIO mode 4, DMA	mode 2,	disable
     UltraDMA".	 The special setting 0x0000 means "use whatever	the drive
     claims to support".

SEE ALSO
     intro(4), pciide(4), scsi(4), wdc(4), disklabel(5), atactl(8),
     disklabel(8), fdisk(8)

FreeBSD	13.0			 May 31, 2007			  FreeBSD 13.0

NAME | SYNOPSIS | DESCRIPTION | SEE ALSO

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=wd&sektion=4&manpath=OpenBSD+6.9>

home | help