Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
VIRT-VIEWER(1)		    Virtualization Support		VIRT-VIEWER(1)

NAME
       virt-viewer - display the graphical console for a virtual machine

SYNOPSIS
       virt-viewer [OPTIONS] [DOMAIN-NAME|ID|UUID]

DESCRIPTION
       virt-viewer is a	minimal	tool for displaying the	graphical console of a
       virtual machine.	The console is accessed	using the VNC or SPICE
       protocol. The guest can be referred to based on its name, ID, or	UUID.
       If the guest is not already running, then the viewer can	be told	to
       wait until it starts before attempting to connect to the	console.  The
       viewer can connect to remote hosts to lookup the	console	information
       and then	also connect to	the remote console using the same network
       transport.

OPTIONS
       The following options are accepted when running "virt-viewer":

       -h, --help
	   Display command line	help summary

       -V, --version
	   Display program version number

       -v, --verbose
	   Display information about the connection

       -c URI, --connect=URI
	   Specify the hypervisor connection URI

       -w, --wait
	   Wait	for the	domain to start	up before attempting to	connect	to the
	   console

       -r, --reconnect
	   Automatically reconnect to the domain if it shuts down and restarts

       -z PCT, --zoom=PCT
	   Zoom	level of the display window in percentage. Range 10-400.

       -d, --direct
	   Do not attempt to tunnel the	console	over SSH, even if the main
	   connection URI used SSH.

       -a, --attach
	   Instead of making a direct TCP/UNIX socket connection to the	remote
	   display, ask	libvirt	to provide a pre-connected socket for the
	   display. This avoids	the need to authenticate with the remote
	   display server directly. This option	will only work when connecting
	   to a	guest that is running on the same host as the virt-viewer
	   program. If attaching to the	guest via libvirt fails, virt-viewer
	   will	automatically fallback to trying a regular direct TCP/UNIX
	   socket connection.

       -f, --full-screen
	   Start with the window maximised to fullscreen

	   If supported, the remote display will be reconfigured to match the
	   physical client monitor configuration, by enabling or disabling
	   extra monitors as necessary.	This is	currently implemented by the
	   Spice backend only.

	   To specify which client monitors are	used in	fullscreen mode, see
	   the CONFIGURATION section below.

       --debug
	   Print debugging information

       -H HOTKEYS, --hotkeys HOTKEYS
	   Set global hotkey bindings. By default, keyboard shortcuts only
	   work	when the guest display widget does not have focus.  Any
	   actions specified in	HOTKEYS	will be	effective even when the	guest
	   display widget has input focus. The format for HOTKEYS is
	   <action1>=<key1>[+<key2>][,<action2>=<key3>[+<key4>]].  Key-names
	   are case-insensitive. Valid actions are: toggle-fullscreen,
	   release-cursor, secure-attention, smartcard-insert and smartcard-
	   remove.  The	"secure-attention" action sends	a secure attention
	   sequence (Ctrl+Alt+Del) to the guest. Examples:

	     --hotkeys=toggle-fullscreen=shift+f11,release-cursor=shift+f12

	     --hotkeys=release-cursor=ctrl+alt

	   Note	that hotkeys for which no binding is given are disabled.
	   Although the	hotkeys	specified here are handled by the client, it
	   is still possible to	send these key combinations to the guest via a
	   menu	item.

       -k, --kiosk
	   Start in kiosk mode.	In this	mode, the application will start in
	   fullscreen with minimal UI. It will prevent the user	from quitting
	   or performing any interaction outside of usage of the remote
	   desktop session.

	   Note	that it	can't offer a complete secure solution by itself. Your
	   kiosk system	must have additional configuration and security
	   settings to lock down the OS. In particular,	you must configure or
	   disable the window manager, limit the session capabilities, use
	   some	restart/watchdog mechanism, disable VT switching etc.

       --kiosk-quit <never|on-disconnect>
	   By default, when kiosk mode is enabled, virt-viewer will remain
	   open	when the connection to the remote server is terminated.	By
	   setting kiosk-quit option to	"on-disconnect"	value, virt-viewer
	   will	quit instead. Please note that --reconnect takes precedence
	   over	this option, and will attempt to do a reconnection before it
	   quits.

CONFIGURATION
       A small number of configuration options can be controlled by editing
       the settings file located in the	user configuration directory:

	   <USER-CONFIG-DIR>/virt-viewer/settings

       This file is a text file	in INI format, with application	options	in the
       [virt-viewer] group and per-guest options in a group identified by the
       guest's UUID. The application options should not	be edited manually.
       There is	also a special [fallback] group	which specifies	options	for
       all guests that don't have an explicit group.

       For each	guest, the initial fullscreen monitor configuration can	be
       specified by using the monitor-mapping key. This	configuration only
       takes effect when the -f/--full-screen option is	specified.

       The value of this key is	a list of mappings between a guest display and
       a client	monitor. Each mapping is separated by a	semicolon character,
       and the mappings	have the format
       <GUEST-DISPLAY-ID>:<CLIENT-MONITOR-ID>.

       For example, to map guest displays 1 and	2 to client monitors 2 and 3
       for the guest with a UUID of e4591275-d9d3-4a44-a18b-ef2fbc8ac3e2, use:

	   [e4591275-d9d3-4a44-a18b-ef2fbc8ac3e2]
	   monitor-mapping=1:2;2:3

       The monitor-mapping must	contain	ids of all displays from 1 to the last
       desired display id, e.g.	"monitor-mapping=3:3" is invalid because
       mappings	for displays 1 and 2 are not specified.

EXAMPLES
       To connect to the guest called 'demo' running under Xen

	  virt-viewer demo

       To use GUI for connecting to a guest running under QEMU

	  virt-viewer --connect	qemu:///system

       To connect to the guest with ID 7 running under QEMU

	  virt-viewer --connect	qemu:///system 7

       To wait for the guest with UUID 66ab33c0-6919-a3f7-e659-16c82d248521 to
       startup and then	connect, also reconnecting upon	restart	of VM

	  virt-viewer --reconnect --wait 66ab33c0-6919-a3f7-e659-16c82d248521

       To connect to a remote console using TLS

	  virt-viewer --connect	xen://example.org/ demo

       To connect to a remote host using SSH, lookup the guest config and then
       make a direct non-tunnelled connection of the console

	  virt-viewer --direct --connect xen+ssh://root@example.org/ demo

AUTHOR
       Written by Daniel P. Berrange, based on the GTK-VNC example program
       gvncviewer.

BUGS
       Report bugs to the mailing list
       "http://www.redhat.com/mailman/listinfo/virt-tools-list"

COPYRIGHT
       Copyright (C) 2007-2014 Red Hat,	Inc., and various contributors.	 This
       is free software. You may redistribute copies of	it under the terms of
       the GNU General Public License
       "https://www.gnu.org/licenses/gpl-2.0.html". There is NO	WARRANTY, to
       the extent permitted by law.

SEE ALSO
       virsh(1), "virt-manager(1)", "spice-gtk(1)", the	project	website
       "http://virt-manager.org"

perl v5.22.2			  2016-06-30			VIRT-VIEWER(1)

NAME | SYNOPSIS | DESCRIPTION | OPTIONS | CONFIGURATION | EXAMPLES | AUTHOR | BUGS | COPYRIGHT | SEE ALSO

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=virt-viewer&sektion=1&manpath=FreeBSD+12.0-RELEASE+and+Ports>

home | help