Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
VIRT-CLONE(1)		    Virtualization Support		 VIRT-CLONE(1)

NAME
       virt-clone - clone existing virtual machine images

SYNOPSIS
       virt-clone [OPTION]...

DESCRIPTION
       virt-clone  is a	command	line tool for cloning existing virtual machine
       images using the	libvirt	hypervisor management library.	It  will  copy
       the disk	images of any existing virtual machine,	and define a new guest
       with an identical virtual hardware configuration.  Elements  which  re-
       quire  uniqueness  will be updated to avoid a clash between old and new
       guests.

       By default, virt-clone will show	an error if the	necessary  information
       to clone	the guest is not provided. The --auto-clone option will	gener-
       ate all needed input, aside from	the source guest to clone.

       Please note, virt-clone does not	change anything	_inside_ the guest OS,
       it  only	 duplicates  disks  and	does host side changes.	So things like
       changing	passwords, changing static IP address,	etc  are  outside  the
       scope   of   this   tool.  For  these  types  of	 changes,  please  see
       virt-sysprep.

GENERAL	OPTIONS
       Most options are	not required. Minimum requirements are	--original  or
       --original-xml (to specify the guest to clone), --name, and appropriate
       storage options via -file.

       --connect URI
	      Connect to a non-default hypervisor. See virt-install(1) for de-
	      tails

       -o, --original ORIGINAL_GUEST
	      Name of the original guest to be cloned. This guest must be shut
	      off.

       --original-xml ORIGINAL_XML
	      Libvirt guest xml	file to	use as the original guest.  The	 guest
	      does  not	 need  to  be  defined on the libvirt connection. This
	      takes the	place of the --original	parameter.

       --auto-clone
	      Generate a new guest name, and paths for new storage.

	      An example of possible generated output:

		 Original name	      :	MyVM
		 Generated clone name :	MyVM-clone

		 Original disk path   :	/home/user/foobar.img
		 Generated disk	path  :	/home/user/foobar-clone.img

	      If generated names collide with existing VMs or storage, a  num-
	      ber is appended, such as foobar-clone-1.img, or MyVM-clone-3.

       -n, --name NAME
	      Name  of	the  new  guest	virtual	machine	instance. This must be
	      unique amongst all guests	known to  the  hypervisor  connection,
	      including	those not currently active.

       -u, --uuid UUID
	      UUID  for	the guest; if none is given a random UUID will be gen-
	      erated. If you specify UUID, you should use a 32-digit hexadeci-
	      mal  number.  UUID  are  intended	to be unique across the	entire
	      data center, and indeed world. Bear this	in  mind  if  manually
	      specifying a UUID

       -f, --file PATH
	      Path  to	the  file, disk	partition, or logical volume to	use as
	      the backing store	for the	new guest's virtual disk. If the orig-
	      inal  guest  has multiple	disks, this parameter must be repeated
	      multiple times, once per disk in the original virtual machine.

       --nvram NVRAMFILE
	      Optional path to the new nvram VARS file,	if no path  is	speci-
	      fied  and	 the  guest  has  nvram	 the  new  nvram  path will be
	      auto-generated. If the guest doesn't have	nvram this option will
	      be ignored.

       --force-copy TARGET
	      Force  cloning  the  passed disk target ('hdc', 'sda', etc.). By
	      default, virt-clone will	skip  certain  disks,  such  as	 those
	      marked 'readonly'	or 'shareable'.

       --skip-copy TARGET
	      Skip cloning the passed disk target ('hdc', 'sda', etc.).	By de-
	      fault, virt-clone	will  clone  certain  disk  images,  typically
	      read/write  devices.  Use	this to	skip copying of	a specific de-
	      vice, so the new VM uses the same	storage	path as	 the  original
	      VM.

       --nonsparse
	      Fully  allocate  the  new	 storage if the	path being cloned is a
	      sparse file.  See	virt-install(1)	for more details on sparse vs.
	      nonsparse.

       --preserve-data
	      No  storage  is  cloned: disk images specific by --file are pre-
	      served as	is, and	referenced in the new clone XML. This is  use-
	      ful  if you want to clone	a VM XML template, but not the storage
	      contents.

       --reflink
	      When --reflink is	specified, perform a lightweight copy. This is
	      much  faster  if source images and destination images are	all on
	      the same btrfs filesystem.  If COW copy is  not  possible,  then
	      virt-clone fails.

       -m, --mac MAC
	      Fixed  MAC  address for the guest; If this parameter is omitted,
	      or the value RANDOM is specified a suitable address will be ran-
	      domly  generated.	Addresses are applied sequentially to the net-
	      works as they are	listed in the original guest XML.

       --print-xml
	      Print the	generated clone	XML and	exit without cloning.

       --replace
	      Shutdown and remove any existing guest with  the	passed	--name
	      before cloning the original guest.

       -h, --help
	      Show the help message and	exit

       --version
	      Show program's version number and	exit

       --check
	      Enable  or  disable  some	validation checks. See virt-install(1)
	      for more details.

       -q, --quiet
	      Suppress non-error output.

       -d, --debug
	      Print debugging information to the terminal when running the in-
	      stall  process.	The  debugging	information  is	also stored in
	      ~/.cache/virt-manager/virt-clone.log even	if this	 parameter  is
	      omitted.

EXAMPLES
       Clone  the guest	called demo on the default connection, auto generating
       a new name and disk clone path.

	  # virt-clone \
	       --original demo \
	       --auto-clone

       Clone the guest called demo which has a single disk to copy

	  # virt-clone \
	       --original demo \
	       --name newdemo \
	       --file /var/lib/xen/images/newdemo.img

       Clone a QEMU guest with multiple	disks

	  # virt-clone \
	       --connect qemu:///system	\
	       --original demo \
	       --name newdemo \
	       --file /var/lib/xen/images/newdemo.img \
	       --file /var/lib/xen/images/newdata.img

       Clone a guest to	a physical device which	is at  least  as  big  as  the
       original	 guests	 disks.	 If  the destination device is bigger, the new
       guest can do a filesystem resize	when it	boots.

	  # virt-clone \
	       --connect qemu:///system	\
	       --original demo \
	       --name newdemo \
	       --file /dev/HostVG/DemoVM \
	       --mac 52:54:00:34:11:54

BUGS
       Please see https://virt-manager.org/bugs

COPYRIGHT
       Copyright (C) Fujitsu Limited, Copyright	(C) Red	Hat, Inc, and  various
       contributors.  This is free software. You may redistribute copies of it
       under   the   terms    of    the	   GNU	  General    Public    License
       https://www.gnu.org/licenses/gpl.html.	There  is  NO WARRANTY,	to the
       extent permitted	by law.

SEE ALSO
       virt-sysprep(1),	 virsh(1),   virt-install(1),	virt-manager(1),   the
       project website https://virt-manager.org

								 VIRT-CLONE(1)

NAME | SYNOPSIS | DESCRIPTION | GENERAL OPTIONS | EXAMPLES | BUGS | COPYRIGHT | SEE ALSO

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=virt-clone&sektion=1&manpath=FreeBSD+13.0-RELEASE+and+Ports>

home | help