Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
VIRSH(1)		    Virtualization Support		      VIRSH(1)

NAME
       virsh - management user interface

SYNOPSIS
       virsh [OPTION]... [COMMAND_STRING]

       virsh [OPTION]... COMMAND [ARG]...

DESCRIPTION
       The  virsh  program  is the main	interface for managing virsh guest do-
       mains. The program can be used to create, pause,	and shutdown  domains.
       It  can also be used to list current domains. Libvirt is	a C toolkit to
       interact	with the virtualization	capabilities  of  recent  versions  of
       Linux  (and  other  OSes).  It is free software available under the GNU
       Lesser General Public License. Virtualization of	 the  Linux  Operating
       System means the	ability	to run multiple	instances of Operating Systems
       concurrently on a single	hardware system	where the basic	resources  are
       driven  by  a Linux instance. The library aims at providing a long term
       stable C	API.  It currently supports Xen, QEMU, KVM, LXC, OpenVZ,  Vir-
       tualBox and VMware ESX.

       The basic structure of most virsh usage is:

	  virsh	[OPTION]... <command> <domain> [ARG]...

       Where  command  is  one of the commands listed below; domain is the nu-
       meric domain id,	or the domain name, or the domain UUID;	and  ARGS  are
       command	specific  options.  There are a	few exceptions to this rule in
       the cases where the command in question acts on all domains, the	entire
       machine,	 or  directly on the xen hypervisor.  Those exceptions will be
       clear for each of those commands.  Note:	it is permissible to give  nu-
       meric  names to domains,	however, doing so will result in a domain that
       can only	be identified by domain	id. In other words, if a numeric value
       is  supplied  it	will be	interpreted as a domain	id, not	as a name. Any
       command starting	with # is treated as a comment and  silently  ignored,
       all other unrecognized commands are diagnosed.

       The  virsh  program can be used either to run one COMMAND by giving the
       command and its	arguments  on  the  shell  command  line,  or  a  COM-
       MAND_STRING  which  is  a  single shell argument	consisting of multiple
       COMMAND actions and their arguments joined with	whitespace  and	 sepa-
       rated  by semicolons or newlines	between	commands, where	unquoted back-
       slash-newline pairs are elided.	Within	COMMAND_STRING,	 virsh	under-
       stands the same single, double, and backslash escapes as	the shell, al-
       though you must add another layer of shell  escaping  in	 creating  the
       single  shell  argument,	and any	word starting with unquoted # begins a
       comment that ends at newline.  If no command is given  in  the  command
       line, virsh will	then start a minimal interpreter waiting for your com-
       mands, and the quit command will	then exit the program.

       The virsh program understands the following OPTIONS.

       -c, --connect URI

       Connect to the specified	URI, as	if by the connect command, instead  of
       the default connection.

       -d, --debug LEVEL

       Enable debug messages at	integer	LEVEL and above.  LEVEL	can range from
       0 to 4 (default).  See the  documentation  of  VIRSH_DEBUG  environment
       variable	below for the description of each LEVEL.

       o -e, --escape string

       Set  alternative	 escape	sequence for console command. By default, tel-
       net's ^]	is used. Allowed characters when using hat notation  are:  al-
       phabetic	character, @, [, ], , ^, _.

       o -h, --help

       Ignore  all  other  arguments,  and  behave as if the help command were
       given instead.

       o -k, --keepalive-interval INTERVAL

       Set an INTERVAL (in seconds) for	sending	keepalive  messages  to	 check
       whether	connection to the server is still alive.  Setting the interval
       to 0 disables client keepalive mechanism.

       o -K, --keepalive-count COUNT

       Set a number of times keepalive message can be sent without getting  an
       answer  from  the server	without	marking	the connection dead.  There is
       no effect to this setting in case the INTERVAL is set to	0.

       o -l, --log FILE

       Output logging details to FILE.

       o -q, --quiet

       Avoid extra informational messages.

       o -r, --readonly

       Make the	initial	connection read-only, as if by the  --readonly	option
       of the connect command.

       o -t, --timing

       Output elapsed time information for each	command.

       o -v, --version[=short]

       Ignore  all  other arguments, and prints	the version of the libvirt li-
       brary virsh is coming from

       o -V, --version=long

       Ignore all other	arguments, and prints the version of the  libvirt  li-
       brary  virsh  is	 coming	from and which options and driver are compiled
       in.

NOTES
       Most virsh operations rely upon the libvirt library being able to  con-
       nect  to	an already running libvirtd service.  This can usually be done
       using the command service libvirtd start.

       Most virsh commands require root	privileges to run due to the  communi-
       cations	channels  used to talk to the hypervisor.  Running as non root
       will return an error.

       Most virsh commands act synchronously, except maybe shutdown,  setvcpus
       and  setmem.  In	 those cases the fact that the virsh program returned,
       may not mean the	action is complete and you must	poll  periodically  to
       detect that the guest completed the operation.

       virsh  strives  for  backward compatibility.  Although the help command
       only lists the preferred	usage of a command, if	an  older  version  of
       virsh  supported	 an alternate spelling of a command or option (such as
       --tunnelled instead of  --tunneled),  then  scripts  using  that	 older
       spelling	will continue to work.

       Several	virsh  commands	take an	optionally scaled integer; if no scale
       is provided, then the default is	listed in the command (for  historical
       reasons,	 some  commands	default	to bytes, while	other commands default
       to kibibytes).  The following case-insensitive suffixes can be used  to
       select a	specific scale:

	  b, byte  byte	     1
	  KB	   kilobyte  1,000
	  k, KiB   kibibyte  1,024
	  MB	   megabyte  1,000,000
	  M, MiB   mebibyte  1,048,576
	  GB	   gigabyte  1,000,000,000
	  G, GiB   gibibyte  1,073,741,824
	  TB	   terabyte  1,000,000,000,000
	  T, TiB   tebibyte  1,099,511,627,776
	  PB	   petabyte  1,000,000,000,000,000
	  P, PiB   pebibyte  1,125,899,906,842,624
	  EB	   exabyte   1,000,000,000,000,000,000
	  E, EiB   exbibyte  1,152,921,504,606,846,976

GENERIC	COMMANDS
       The following commands are generic i.e. not specific to a domain.

   help
       Syntax:

	  help [command-or-group]

       This  lists each	of the virsh commands.	When used without options, all
       commands	are listed, one	per line,  grouped  into  related  categories,
       displaying the keyword for each group.

       To  display  only  commands  for	a specific group, give the keyword for
       that group as an	option.	 For example:

       Example 1:

	  virsh	# help host

	  Host and Hypervisor (help keyword 'host'):
	      capabilities		     capabilities
	      cpu-models		     show the CPU models for an	architecture
	      connect			     (re)connect to hypervisor
	      freecell			     NUMA free memory
	      hostname			     print the hypervisor hostname
	      qemu-attach		     Attach to existing	QEMU process
	      qemu-monitor-command	     QEMU Monitor Command
	      qemu-agent-command	     QEMU Guest	Agent Command
	      sysinfo			     print the hypervisor sysinfo
	      uri			     print the hypervisor canonical URI

       To display detailed information for a specific command, give  its  name
       as the option instead.  For example:

       Example 2:

	  virsh	# help list
	    NAME
	      list - list domains

	    SYNOPSIS
	      list [--inactive]	[--all]

	    DESCRIPTION
	      Returns list of domains.

	    OPTIONS
	      --inactive       list inactive domains
	      --all	       list inactive & active domains

   quit, exit
       Syntax:

	  quit
	  exit

       quit this interactive terminal

   version
       Syntax:

	  version [--daemon]

       Will  print  out	the major version info about what this built from.  If
       --daemon	is specified then the version of the  libvirt  daemon  is  in-
       cluded in the output.

       Example:

	  $ virsh version
	  Compiled against library: libvirt 1.2.3
	  Using	library: libvirt 1.2.3
	  Using	API: QEMU 1.2.3
	  Running hypervisor: QEMU 2.0.50

	  $ virsh version --daemon
	  Compiled against library: libvirt 1.2.3
	  Using	library: libvirt 1.2.3
	  Using	API: QEMU 1.2.3
	  Running hypervisor: QEMU 2.0.50
	  Running against daemon: 1.2.6

   cd
       Syntax:

	  cd [directory]

       Will  change current directory to directory.  The default directory for
       the cd command is the home directory or,	if there is no	HOME  variable
       in the environment, the root directory.

       This command is only available in interactive mode.

   pwd
       Syntax:

	  pwd

       Will print the current directory.

   connect
       Syntax:

	  connect [URI]	[--readonly]

       (Re)-Connect  to	 the hypervisor. When the shell	is first started, this
       is automatically	run with the URI parameter requested by	the -c	option
       on  the command line. The URI parameter specifies how to	connect	to the
       hypervisor. The URI docs	https://libvirt.org/uri.html list  the	values
       supported, but the most common are:

       o xen:///system

	 this is used to connect to the	local Xen hypervisor

       o qemu:///system

	 connect  locally  as  root to the daemon supervising QEMU and KVM do-
	 mains

       o qemu:///session

	 connect locally as a normal user to his own set of QEMU and  KVM  do-
	 mains

       o lxc:///system

	 connect to a local linux container

       To find the currently used URI, check the uri command documented	below.

       For  remote access see the URI docs https://libvirt.org/uri.html	on how
       to make URIs. The --readonly option allows for read-only	connection

   uri
       Syntax:

	  uri

       Prints the hypervisor canonical URI, can	be useful in shell mode.

   hostname
       Syntax:

	  hostname

       Print the hypervisor hostname.

   sysinfo
       Syntax:

	  sysinfo

       Print the XML representation of the hypervisor sysinfo, if available.

   nodeinfo
       Syntax:

	  nodeinfo

       Returns basic information about the node, like number and type of  CPU,
       and  size of the	physical memory. The output corresponds	to virNodeInfo
       structure. Specifically,	the "CPU socket(s)" field means	number of  CPU
       sockets	per  NUMA  cell. The information libvirt displays is dependent
       upon what each architecture may provide.

   nodecpumap
       Syntax:

	  nodecpumap [--pretty]

       Displays	the node's total number	of CPUs, the number of online CPUs and
       the list	of online CPUs.

       With --pretty the online	CPUs are printed as a range instead of a list.

   nodecpustats
       Syntax:

	  nodecpustats [cpu] [--percent]

       Returns	cpu  stats  of the node.  If cpu is specified, this will print
       the specified cpu statistics only.  If  --percent  is  specified,  this
       will  print the percentage of each kind of cpu statistics during	1 sec-
       ond.

   nodememstats
       Syntax:

	  nodememstats [cell]

       Returns memory stats of the node.  If  cell  is	specified,  this  will
       print the specified cell	statistics only.

   nodesuspend
       Syntax:

	  nodesuspend [target] [duration]

       Puts  the node (host machine) into a system-wide	sleep state and	sched-
       ule the node's Real-Time-Clock interrupt	to resume the node  after  the
       time duration specified by duration is out.  target specifies the state
       to which	the host will be suspended to, it can  be  "mem"  (suspend  to
       RAM),  "disk"  (suspend	to disk), or "hybrid" (suspend to both RAM and
       disk).  duration	specifies the time duration in seconds for  which  the
       host has	to be suspended, it should be at least 60 seconds.

   node-memory-tune
       Syntax:

	  node-memory-tune [shm-pages-to-scan] [shm-sleep-millisecs] [shm-merge-across-nodes]

       Allows	you   to   display   or	  set	the  node  memory  parameters.
       shm-pages-to-scan can be	used to	set the	number of pages	to scan	before
       the  shared  memory  service  goes to sleep; shm-sleep-millisecs	can be
       used to set the number of millisecs the shared  memory  service	should
       sleep  before next scan;	shm-merge-across-nodes specifies if pages from
       different numa nodes can	be merged. When	set to	0,  only  pages	 which
       physically  reside  in the memory area of same NUMA node	can be merged.
       When set	to 1, pages from all nodes can be merged. Default to 1.

       Note: Currently the "shared memory  service"  only  means  KSM  (Kernel
       Samepage	Merging).

   capabilities
       Syntax:

	  capabilities

       Print  an XML document describing the capabilities of the hypervisor we
       are currently connected to. This	includes a section on the  host	 capa-
       bilities	 in  terms  of	CPU and	features, and a	set of description for
       each kind of guest which	can be virtualized. For	a  more	 complete  de-
       scription see:

       https://libvirt.org/formatcaps.html

       The XML also show the NUMA topology information if available.

   domcapabilities
       Syntax:

	  domcapabilities [virttype] [emulatorbin] [arch] [machine]

       Print an	XML document describing	the domain capabilities	for the	hyper-
       visor we	are connected to using information either sourced from an  ex-
       isting  domain or taken from the	virsh capabilities output. This	may be
       useful if you intend to create a	new domain and are curious if for  in-
       stance  it could	make use of VFIO by creating a domain for the hypervi-
       sor with	a specific emulator and	architecture.

       Each hypervisor will have different requirements	 regarding  which  op-
       tions  are  required  and  which	are optional. A	hypervisor can support
       providing a default value for any of the	options.

       The virttype option specifies the virtualization	type used.  The	 value
       to  be  used  is	 either	from the 'type'	attribute of the <domain/> top
       level element from the domain XML or the	'type' attribute found	within
       each  <guest/>  element from the	virsh capabilities output.  The	emula-
       torbin option specifies the path	to the emulator. The value to be  used
       is  either  the <emulator> element in the domain	XML or the virsh capa-
       bilities	output.	The arch option	specifies the architecture to be  used
       for  the	 domain.  The  value to	be used	is either the "arch" attribute
       from the	domain's XML <os/>  element  and  <type/>  subelement  or  the
       "name"  attribute  of  an  <arch/> element from the virsh capabililites
       output. The machine specifies the machine type for  the	emulator.  The
       value  to  be  used is either the "machine" attribute from the domain's
       XML <os/> element and <type/> subelement	or one from a list of machines
       from  the virsh capabilities output for a specific architecture and do-
       main type.

       For the QEMU hypervisor,	a virttype of either 'qemu' or 'kvm'  must  be
       supplied	along with either the emulatorbin or arch in order to generate
       output for the default machine.	Supplying a machine value will	gener-
       ate output for the specific machine.

   pool-capabilities
       Syntax:

	  pool-capabilities

       Print  an XML document describing the storage pool capabilities for the
       connected storage driver. This may be useful if you intend to create  a
       new  storage  pool  and	need to	know the available pool	types and sup-
       ported storage pool source and target volume formats as well as the re-
       quired source elements to create	the pool.

   inject-nmi
       Syntax:

	  inject-nmi domain

       Inject NMI to the guest.

   list
       Syntax:

	  list [--inactive | --all]
	       [--managed-save]	[--title]
	       { [--table] | --name | --uuid | --id }
	       [--persistent] [--transient]
	       [--with-managed-save] [--without-managed-save]
	       [--autostart] [--no-autostart]
	       [--with-snapshot] [--without-snapshot]
	       [--with-checkpoint] [--without-checkpoint]
	       [--state-running] [--state-paused]
	       [--state-shutoff] [--state-other]

       Prints information about	existing domains.  If no options are specified
       it prints out information about running domains.

       Example 1:

       An example format for the list is as follows:

	  ``virsh`` list
	    Id	  Name				 State
	  ----------------------------------------------------
	    0	  Domain-0			 running
	    2	  fedora			 paused

       Name is the name	of the domain.	ID the domain numeric  id.   State  is
       the run state (see below).

       STATES

       The  State field	lists what state each domain is	currently in. A	domain
       can be in one of	the following possible states:

       o running

	 The domain is currently running on a CPU

       o idle

	 The domain is idle, and not running or	runnable.  This	can be	caused
	 because the domain is waiting on IO (a	traditional wait state)	or has
	 gone to sleep because there was nothing else for it to	do.

       o paused

	 The domain has	been paused, usually occurring through the administra-
	 tor  running  virsh  suspend.	When in	a paused state the domain will
	 still consume allocated resources like	memory,	but will not be	eligi-
	 ble for scheduling by the hypervisor.

       o in shutdown

	 The domain is in the process of shutting down,	i.e. the guest operat-
	 ing system has	been notified and should be in the process of stopping
	 its operations	gracefully.

       o shut off

	 The  domain  is  not  running.	 Usually this indicates	the domain has
	 been shut down	completely, or has not been started.

       o crashed

	 The domain has	crashed, which is always a  violent  ending.   Usually
	 this  state  can  only	occur if the domain has	been configured	not to
	 restart on crash.

       o pmsuspended

	 The domain has	been suspended by guest	power management, e.g. entered
	 into s3 state.

       Normally	only active domains are	listed.	To list	inactive domains spec-
       ify --inactive or --all to list both active and inactive	domains.

       Filtering

       To further filter the list of domains you may specify one  or  more  of
       filtering  flags	supported by the list command. These flags are grouped
       by function.  Specifying	one or more flags from	a  group  enables  the
       filter  group.  Note  that  some	combinations of	flags may yield	no re-
       sults. Supported	filtering flags	and groups:

   Persistence
       Flag --persistent is used to include persistent guests in the  returned
       list. To	include	transient guests specify --transient.

   Existence of	managed	save image
       To  list	 domains  having a managed save	image specify flag --with-man-
       aged-save. For domains that don't have a	 managed  save	image  specify
       --without-managed-save.

   Domain state
       The  following  filter flags select a domain by its state: --state-run-
       ning  for  running  domains,  --state-paused    for   paused   domains,
       --state-shutoff	for turned off domains and --state-other for all other
       states as a fallback.

   Autostarting	domains
       To list autostarting domains use	the flag --autostart. To list  domains
       with this feature disabled use --no-autostart.

   Snapshot existence
       Domains that have snapshot images can be	listed using flag --with-snap-
       shot, domains without a snapshot	--without-snapshot.

   Checkpoint existence
       Domains that have checkpoints can be listed  using  flag	 --with-check-
       point, domains without a	checkpoint --without-checkpoint.

       When  talking  to older servers,	this command is	forced to use a	series
       of API calls with an inherent race, where a domain might	not be	listed
       or  might appear	more than once if it changed state between calls while
       the list	was being collected.  Newer servers do not have	this problem.

       If --managed-save is specified, then domains  that  have	 managed  save
       state  (only possible if	they are in the	shut off state,	so you need to
       specify --inactive or --all to actually list them) will instead show as
       saved in	the listing. This flag is usable only with the default --table
       output.	Note that this flag does not filter the	list of	domains.

       If --name is specified, domain names are	printed	instead	of  the	 table
       formatted  one  per  line.  If  --uuid is specified domain's UUID's are
       printed instead of names. If --id is specified then domain's  ID's  are
       printed	indead	of  names.  However, it	is possible to combine --name,
       --uuid and --id to select only desired fields for printing. Flag	 --ta-
       ble  specifies  that  the legacy	table-formatted	output should be used,
       but it is mutually exclusive with --name, --uuid	and --id. This is  the
       default and will	be used	if neither of --name, --uuid or	--id is	speci-
       fied. If	neither	--name nor --uuid is specified,	but --id is, then only
       active  domains	are listed, even with the --all	parameter as otherwise
       the output would	just contain bunch of lines with just -1.

       If --title is specified,	then the short domain description  (title)  is
       printed	in  an extra column. This flag is usable only with the default
       --table output.

       Example 2:

	  $ virsh list --title
	    Id	  Name	      State	 Title
	   -------------------------------------------
	    0	  Domain-0    running	 Mailserver 1
	    2	  fedora      paused

   freecell
       Syntax:

	  freecell [{ [--cellno] cellno	| --all	}]

       Prints the available amount of memory on	the machine or within  a  NUMA
       cell.  The freecell command can provide one of three different displays
       of available memory on the machine depending on the options  specified.
       With  no	 options,  it  displays	 the total free	memory on the machine.
       With the	--all option, it displays the free memory in each cell and the
       total  free memory on the machine.  Finally, with a numeric argument or
       with --cellno plus a cell number	it will	display	the  free  memory  for
       the specified cell only.

   freepages
       Syntax:

	  freepages [{ [--cellno] cellno [--pagesize] pagesize |     --all }]

       Prints  the available amount of pages within a NUMA cell. cellno	refers
       to the NUMA cell	you're interested in. pagesize	is  a  scaled  integer
       (see  NOTES above).  Alternatively, if --all is used, info on each pos-
       sible combination of NUMA cell and page size is printed out.

   allocpages
       Syntax:

	  allocpages [--pagesize] pagesize [--pagecount] pagecount [[--cellno] cellno] [--add] [--all]

       Change the size of pages	pool of	pagesize on  the  host.	 If  --add  is
       specified,  then	 pagecount  pages are added into the pool. However, if
       --add wasn't specified, then the	pagecount is taken as the new absolute
       size of the pool	(this may be used to free some pages and size the pool
       down). The cellno modifier can be used to narrow	the modification  down
       to  a  single  host  NUMA cell. On the other end	of spectrum lies --all
       which executes the modification on all NUMA cells.

   cpu-baseline
       Syntax:

	  cpu-baseline FILE [--features] [--migratable]

       Compute baseline	CPU which will be supported by all host	CPUs given  in
       <file>.	(See hypervisor-cpu-baseline command to	get a CPU which	can be
       provided	by a specific hypervisor.) The list of host CPUs is  built  by
       extracting  all	<cpu>  elements	 from the <file>. Thus,	the <file> can
       contain either a	set of <cpu> elements separated	by new lines or	even a
       set  of	complete  <capabilities> elements printed by capabilities com-
       mand.  If --features is specified, then the resulting  XML  description
       will explicitly include all features that make up the CPU, without this
       option features that are	part of	the CPU	model will not	be  listed  in
       the  XML	 description.	 If  --migratable  is specified, features that
       block migration will not	be included in the resulting CPU.

   cpu-compare
       Syntax:

	  cpu-compare FILE [--error] [--validate]

       Compare CPU definition from XML <file> with  host  CPU.	(See  hypervi-
       sor-cpu-compare	command	 for comparing the CPU definition with the CPU
       which a specific	hypervisor is able to provide on the  host.)  The  XML
       <file>  may  contain  either host or guest CPU definition. The host CPU
       definition is the <cpu> element and its contents	as printed by capabil-
       ities  command.	The  guest CPU definition is the <cpu> element and its
       contents	from domain XML	definition or the CPU definition created  from
       the  host CPU model found in domain capabilities	XML (printed by	domca-
       pabilities command). In addition	to the <cpu> element itself, this com-
       mand  accepts full domain XML, capabilities XML,	or domain capabilities
       XML containing the CPU definition. For more information	on  guest  CPU
       definition  see:	 https://libvirt.org/formatdomain.html#elementsCPU. If
       --error is specified, the command will return an	error when  the	 given
       CPU  is incompatible with host CPU and a	message	providing more details
       about the incompatibility will be printed out. If --validate is	speci-
       fied,  validates	the format of the XML document against an internal RNG
       schema.

   cpu-models
       Syntax:

	  cpu-models arch

       Print the list of CPU models known by libvirt for the specified	archi-
       tecture.	  Whether  a  specific	hypervisor  is able to create a	domain
       which uses any of the printed CPU models	is a separate  question	 which
       can  be	answered by looking at the domain capabilities XML returned by
       domcapabilities command.	 Moreover, for some architectures libvirt does
       not  know  any CPU models and the usable	CPU models are only limited by
       the hypervisor. This command will print that all	 CPU  models  are  ac-
       cepted  for  these  architectures  and the actual list of supported CPU
       models can be checked in	the domain capabilities	XML.

   echo
       Syntax:

	  echo [--shell] [--xml] [err...] [arg...]

       Echo back each arg, separated by	space.	If --shell is specified,  then
       the  output  will be single-quoted where	needed,	so that	it is suitable
       for reuse in a shell context.  If --xml is specified, then  the	output
       will  be	escaped	for use	in XML.	 If --err is specified,	prefix "error:
       " and output to stderr instead of stdout.

   hypervisor-cpu-compare
       Syntax:

	  hypervisor-cpu-compare FILE [virttype] [emulator] [arch] [machine] [--error] [--validate]

       Compare CPU definition from XML <file> with the CPU the	hypervisor  is
       able  to	provide	on the host. (This is different	from cpu-compare which
       compares	the CPU	definition with	the host CPU without  considering  any
       specific	hypervisor and its abilities.)

       The  XML	 FILE  may  contain either a host or guest CPU definition. The
       host CPU	definition is the <cpu>	element	and its	contents as printed by
       the capabilities	command. The guest CPU definition is the <cpu> element
       and its contents	from the domain	XML definition or the  CPU  definition
       created	from  the  host	CPU model found	in the domain capabilities XML
       (printed	by the domcapabilities command). In addition to	the <cpu> ele-
       ment itself, this command accepts full domain XML, capabilities XML, or
       domain capabilities XML containing the CPU definition. For more	infor-
       mation	      on	guest	     CPU	definition	  see:
       https://libvirt.org/formatdomain.html#elementsCPU.

       The virttype option specifies the virtualization	type  (usable  in  the
       'type'  attribute  of  the  <domain>  top level element from the	domain
       XML). emulator specifies	the path to the	emulator, arch	specifies  the
       CPU architecture, and machine specifies the machine type. If --error is
       specified, the command will return an error when	the given CPU  is  in-
       compatible with the host	CPU and	a message providing more details about
       the incompatibility will	be printed out.	 If --validate	is  specified,
       validates  the  format  of  the	XML  document  against an internal RNG
       schema.

   hypervisor-cpu-baseline
       Syntax:

	  hypervisor-cpu-baseline FILE [virttype] [emulator] [arch] [machine] [--features] [--migratable]

       Compute a baseline CPU which will be compatible with all	 CPUs  defined
       in  an  XML  file and with the CPU the hypervisor is able to provide on
       the host. (This is different from cpu-baseline which does not  consider
       any hypervisor abilities	when computing the baseline CPU.)

       The  XML	FILE may contain either	host or	guest CPU definitions describ-
       ing the host CPU	model. The host	CPU definition is  the	<cpu>  element
       and its contents	as printed by capabilities command. The	guest CPU def-
       inition may be created from the host CPU	model found in domain capabil-
       ities  XML  (printed  by	 domcapabilities  command). In addition	to the
       <cpu> elements, this command accepts full capabilities XMLs, or	domain
       capabilities  XMLs containing the CPU definitions. It is	recommended to
       use only	the CPU	definitions from domain	capabilities, as on  some  ar-
       chitectures  using  the	host CPU definition may	either fail or provide
       unexpected results.

       When FILE contains only a single	CPU definition,	the command will print
       the  same  CPU with restrictions	imposed	by the capabilities of the hy-
       pervisor.  Specifically,	running	th virsh hypervisor-cpu-baseline  com-
       mand  with no additional	options	on the result of virsh domcapabilities
       will transform the host CPU model from domain  capabilities  XML	 to  a
       form directly usable in domain XML.

       The  virttype  option  specifies	the virtualization type	(usable	in the
       'type' attribute	of the <domain>	top  level  element  from  the	domain
       XML).  emulator	specifies the path to the emulator, arch specifies the
       CPU architecture, and machine specifies the machine type. If --features
       is  specified,  then  the resulting XML description will	explicitly in-
       clude all features that make up the CPU,	without	this  option  features
       that  are  part of the CPU model	will not be listed in the XML descrip-
       tion. If	--migratable is	specified, features that block migration  will
       not be included in the resulting	CPU.

DOMAIN COMMANDS
       The  following  commands	 manipulate domains directly, as stated	previ-
       ously most commands take	domain as the first parameter. The domain  can
       be specified as a short integer,	a name or a full UUID.

   autostart
       Syntax:

	  autostart [--disable]	domain

       Configure a domain to be	automatically started at boot.

       The option --disable disables autostarting.

   blkdeviotune
       Syntax:

	  blkdeviotune domain device [[--config] [--live] | [--current]]
	     [[total-bytes-sec]	| [read-bytes-sec] [write-bytes-sec]]
	     [[total-iops-sec] | [read-iops-sec] [write-iops-sec]]
	     [[total-bytes-sec-max] | [read-bytes-sec-max] [write-bytes-sec-max]]
	     [[total-iops-sec-max] | [read-iops-sec-max] [write-iops-sec-max]]
	     [[total-bytes-sec-max-length] |
	      [read-bytes-sec-max-length] [write-bytes-sec-max-length]]
	     [[total-iops-sec-max-length] |
	      [read-iops-sec-max-length] [write-iops-sec-max-length]]
	     [size-iops-sec] [group-name]

       Set or query the	block disk io parameters for a block device of domain.
       device specifies	a unique target	name (<target dev='name'/>) or	source
       file  (<source  file='name'/>)  for one of the disk devices attached to
       domain (see also	domblklist for listing these names).

       If no limit is specified, it will query	current	 I/O  limits  setting.
       Otherwise,  alter the limits with these flags: --total-bytes-sec	speci-
       fies total throughput limit as a	 scaled	 integer,  the	default	 being
       bytes per second	if no suffix is	specified.  --read-bytes-sec specifies
       read throughput limit as	a scaled integer, the default being bytes  per
       second  if  no  suffix is specified.  --write-bytes-sec specifies write
       throughput limit	as a scaled integer, the default being bytes per  sec-
       ond  if	no  suffix is specified.  --total-iops-sec specifies total I/O
       operations limit	per second.  --read-iops-sec specifies read I/O	opera-
       tions  limit  per  second.  --write-iops-sec specifies write I/O	opera-
       tions limit per second.	--total-bytes-sec-max specifies	maximum	 total
       throughput  limit as a scaled integer, the default being	bytes per sec-
       ond if no suffix	is specified  --read-bytes-sec-max  specifies  maximum
       read  throughput	limit as a scaled integer, the default being bytes per
       second if no suffix is specified.  --write-bytes-sec-max	specifies max-
       imum  write  throughput	limit  as  a scaled integer, the default being
       bytes per second	if no suffix is	specified.  --total-iops-sec-max spec-
       ifies	maximum	   total    I/O	   operations	 limit	 per   second.
       --read-iops-sec-max specifies maximum read  I/O	operations  limit  per
       second.	 --write-iops-sec-max  specifies  maximum write	I/O operations
       limit per second.  --total-bytes-sec-max-length specifies  duration  in
       seconds	   to	  allow	    maximum	total	  throughput	limit.
       --read-bytes-sec-max-length specifies duration in seconds to allow max-
       imum read throughput limit.  --write-bytes-sec-max-length specifies du-
       ration in seconds to  allow  maximum  write  throughput	limit.	 --to-
       tal-iops-sec-max-length	specifies duration in seconds to allow maximum
       total I/O operations limit.  --read-iops-sec-max-length specifies dura-
       tion   in   seconds   to	 allow	maximum	 read  I/O  operations	limit.
       --write-iops-sec-max-length specifies duration in seconds to allow max-
       imum  write  I/O	 operations limit.  --size-iops-sec specifies size I/O
       operations limit	per second.   --group-name  specifies  group  name  to
       share I/O quota between multiple	drives.	 For a QEMU domain, if no name
       is provided, then the default is	to have	a single group	for  each  de-
       vice.

       Older versions of virsh only accepted these options with	underscore in-
       stead of	dash, as in --total_bytes_sec.

       Bytes and iops values are independent, but setting only one value (such
       as  --read-bytes-sec)  resets  the other	two in that category to	unlim-
       ited.  An explicit 0 also clears	any limit.  A  non-zero	 value	for  a
       given total cannot be mixed with	non-zero values	for read or write.

       It  is  up to the hypervisor to determine how to	handle the length val-
       ues.  For the QEMU hypervisor, if an I/O	limit value or	maximum	 value
       is set, then the	default	value of 1 second will be displayed. Supplying
       a 0 will	reset the value	back to	the default.

       If --live is specified, affect a	running	guest.	If --config is	speci-
       fied,  affect  the  next	 start of a persistent guest.  If --current is
       specified, it is	equivalent to either --live or --config, depending  on
       the  current  state  of the guest.  When	setting	the disk io parameters
       both --live and --config	flags may be given, but	 --current  is	exclu-
       sive.  For  querying  only  one of --live, --config or --current	can be
       specified. If no	flag is	specified, behavior is different depending  on
       hypervisor.

   blkiotune
       Syntax:

	  blkiotune domain [--weight weight] [--device-weights device-weights]
	     [--device-read-iops-sec device-read-iops-sec]
	     [--device-write-iops-sec device-write-iops-sec]
	     [--device-read-bytes-sec device-read-bytes-sec]
	     [--device-write-bytes-sec device-write-bytes-sec]
	     [[--config] [--live] | [--current]]

       Display	or  set	 the  blkio  parameters.  QEMU/KVM  supports --weight.
       --weight	is in range [100, 1000]. After kernel 2.6.39, the value	 could
       be in the range [10, 1000].

       device-weights  is  a  single  string listing one or more device/weight
       pairs, in the format of	/path/to/device,weight,/path/to/device,weight.
       Each  weight  is	 in  the  range	 [100,	1000], [10, 1000] after	kernel
       2.6.39, or the value 0 to remove	that device from per-device  listings.
       Only  the  devices  listed  in  the  string  are	modified; any existing
       per-device weights for other devices remain unchanged.

       device-read-iops-sec is	a  single  string  listing  one	 or  more  de-
       vice/read_iops_sec    pairs,    int    the   format   of	  /path/to/de-
       vice,read_iops_sec,/path/to/device,read_iops_sec.   Each	 read_iops_sec
       is  a  number which type	is unsigned int, value 0 to remove that	device
       from per-device listing.	 Only the devices listed  in  the  string  are
       modified;  any  existing	per-device read_iops_sec for other devices re-
       main unchanged.

       device-write-iops-sec is	a  single  string  listing  one	 or  more  de-
       vice/write_iops_sec    pairs,	int   the   format   of	  /path/to/de-
       vice,write_iops_sec,/path/to/device,write_iops_sec.		  Each
       write_iops_sec  is  a number which type is unsigned int,	value 0	to re-
       move that device	from per-device	listing.  Only the devices  listed  in
       the  string  are	 modified;  any	existing per-device write_iops_sec for
       other devices remain unchanged.

       device-read-bytes-sec is	a  single  string  listing  one	 or  more  de-
       vice/read_bytes_sec    pairs,	int   the   format   of	  /path/to/de-
       vice,read_bytes_sec,/path/to/device,read_bytes_sec.		  Each
       read_bytes_sec is a number which	type is	unsigned long long, value 0 to
       remove that device from per-device listing.  Only the devices listed in
       the  string  are	 modified;  any	existing per-device read_bytes_sec for
       other devices remain unchanged.

       device-write-bytes-sec is a single  string  listing  one	 or  more  de-
       vice/write_bytes_sec    pairs,	int   the   format   of	  /path/to/de-
       vice,write_bytes_sec,/path/to/device,write_bytes_sec.		  Each
       write_bytes_sec	is  a number which type	is unsigned long long, value 0
       to remove that device from per-device listing.  Only the	devices	listed
       in the string are modified; any existing	per-device write_bytes_sec for
       other devices remain unchanged.

       If --live is specified, affect a	running	guest.	If --config is	speci-
       fied,  affect  the  next	 start of a persistent guest.  If --current is
       specified, it is	equivalent to either --live or --config, depending  on
       the  current state of the guest.	 Both --live and --config flags	may be
       given, but --current is exclusive. If no	flag is	specified, behavior is
       different depending on hypervisor.

   blockcommit
       Syntax:

	  blockcommit domain path [bandwidth] [--bytes]	[base]
	     [--shallow] [top] [--delete] [--keep-relative]
	     [--wait [--async] [--verbose]] [--timeout seconds]
	     [--active]	[{--pivot | --keep-overlay}]

       Reduce  the  length  of a backing image chain, by committing changes at
       the top of the chain (snapshot or delta files) into backing images.  By
       default,	 this  command	attempts to flatten the	entire chain.  If base
       and/or top are specified	as files within	the backing  chain,  then  the
       operation  is constrained to committing just that portion of the	chain;
       --shallow can be	used instead of	base to	specify	the immediate  backing
       file  of	the resulting top image	to be committed.  The files being com-
       mitted are rendered invalid, possibly as	soon as	the operation  starts;
       using  the --delete flag	will attempt to	remove these invalidated files
       at  the	successful  completion	of  the	 commit	 operation.  When  the
       --keep-relative flag is used, the backing file paths will be kept rela-
       tive.

       When top	is omitted or specified	as the active image, it	is also	possi-
       ble  to	specify	 --active to trigger a two-phase active	commit.	In the
       first phase, top	is copied into base and	the job	can only be  canceled,
       with  top  still	 containing data not yet in base. In the second	phase,
       top and base remain identical until a call to blockjob with the --abort
       flag  (keeping  top  as	the active image that tracks changes from that
       point in	time) or the --pivot flag (making base the  new	 active	 image
       and invalidating	top).

       By  default, this command returns as soon as possible, and data for the
       entire disk is committed	in the background; the progress	of the	opera-
       tion  can  be  checked with blockjob.  However, if --wait is specified,
       then this command will block until  the	operation  completes  (or  for
       --active,  enters the second phase), or until the operation is canceled
       because the optional timeout in seconds elapses or SIGINT is sent (usu-
       ally  with Ctrl-C).  Using --verbose along with --wait will produce pe-
       riodic status updates.  If job cancellation is triggered, --async  will
       return  control	to the user as fast as possible, otherwise the command
       may continue to block a little while  longer  until  the	 job  is  done
       cleaning	 up.  Using --pivot is shorthand for combining --active	--wait
       with an automatic blockjob --pivot; and using --keep-overlay is	short-
       hand for	combining --active --wait with an automatic blockjob --abort.

       path  specifies	fully-qualified	 path of the disk; it corresponds to a
       unique target name  (<target  dev='name'/>)  or	source	file  (<source
       file='name'/>) for one of the disk devices attached to domain (see also
       domblklist for listing these names).  bandwidth specifies copying band-
       width limit in MiB/s, although for QEMU,	it may be non-zero only	for an
       online domain. For further information on the  bandwidth	 argument  see
       the corresponding section for the blockjob command.

   blockcopy
       Syntax:

	  blockcopy domain path	{ dest [format]	[--blockdev] | --xml file }
	     [--shallow] [--reuse-external] [bandwidth]
	     [--wait [--async] [--verbose]] [{--pivot |	--finish}]
	     [--timeout	seconds] [granularity] [buf-size] [--bytes]
	     [--transient-job]

       Copy  a	disk backing image chain to a destination.  Either dest	as the
       destination file	name, or --xml with the	name of	an XML file containing
       a top-level <disk> element describing the destination, must be present.
       Additionally, if	dest is	given, format should be	specified  to  declare
       the  format of the destination (if format is omitted, then libvirt will
       reuse the format	of the source, or with --reuse-external	will be	forced
       to  probe  the  destination format, which could be a potential security
       hole).  The command supports --raw as a boolean flag synonym for	--for-
       mat=raw.	 When using dest, the destination is treated as	a regular file
       unless --blockdev is used to signal that	it is a	block device.  By  de-
       fault,  this  command  flattens	the  entire chain; but if --shallow is
       specified, the copy shares the backing chain.

       If --reuse-external is specified, then the destination must  exist  and
       have  sufficient	 space	to hold	the copy. If --shallow is used in con-
       junction	with --reuse-external then the	pre-created  image  must  have
       guest visible contents identical	to guest visible contents of the back-
       ing file	of the original	image. This may	be used	to modify the  backing
       file names on the destination.

       By  default,  the  copy job runs	in the background, and consists	of two
       phases.	Initially, the job must	copy all data  from  the  source,  and
       during  this  phase, the	job can	only be	canceled to revert back	to the
       source disk, with no guarantees	about  the  destination.   After  this
       phase  completes,  both	the source and the destination remain mirrored
       until a call to blockjob	with the --abort and --pivot flags pivots over
       to  the	copy,  or  a  call without --pivot leaves the destination as a
       faithful	copy of	that point in time.  However, if --wait	is  specified,
       then  this command will block until the mirroring phase begins, or can-
       cel the operation if the	optional timeout in seconds elapses or	SIGINT
       is  sent	(usually with Ctrl-C).	Using --verbose	along with --wait will
       produce periodic	status updates.	 Using --pivot	(similar  to  blockjob
       --pivot)	 or --finish (similar to blockjob --abort) implies --wait, and
       will additionally end the job cleanly rather than leaving things	in the
       mirroring  phase.   If  job  cancellation is triggered by timeout or by
       --finish, --async will return control to	the user as fast as  possible,
       otherwise the command may continue to block a little while longer until
       the job has actually cancelled.

       path specifies fully-qualified path of the disk.	  bandwidth  specifies
       copying bandwidth limit in MiB/s. Specifying a negative value is	inter-
       preted as an unsigned long long value that might	be essentially	unlim-
       ited,  but  more	 likely	 would overflow; it is safer to	use 0 for that
       purpose.	For further information	on the bandwidth argument see the cor-
       responding  section  for	 the blockjob command.	Specifying granularity
       allows fine-tuning of the granularity that will be copied when a	 dirty
       region is detected; larger values trigger less I/O overhead but may end
       up copying more data overall (the default value	is  usually  correct);
       hypervisors  may	 restrict  this	 to be a power of two or fall within a
       certain range. Specifying buf-size will control how much	 data  can  be
       simultaneously in-flight	during the copy; larger	values use more	memory
       but may allow faster completion (the default value is usually correct).

       --transient-job allows specifying that the user does  not  require  the
       job  to	be recovered if	the VM crashes or is turned off	before the job
       completes. This flag removes the	restriction of copy jobs to  transient
       domains if that restriction is applied by the hypervisor.

   blockjob
       Syntax:

	  blockjob domain path { [--abort] [--async] [--pivot] |
	     [--info] [--raw] [--bytes]	| [bandwidth] }

       Manage  active  block  operations.   There are three mutually-exclusive
       modes: --info, bandwidth, and --abort.  --async and --pivot imply abort
       mode; --raw implies info	mode; and if no	mode was given,	--info mode is
       assumed.

       path specifies fully-qualified path of the disk;	it  corresponds	 to  a
       unique  target  name  (<target  dev='name'/>)  or  source file (<source
       file='name'/>) for one of the disk devices attached to domain (see also
       domblklist for listing these names).

       In  --abort mode, the active job	on the specified disk will be aborted.
       If --async is also specified, this  command  will  return  immediately,
       rather  than  waiting  for the cancellation to complete.	 If --pivot is
       specified, this requests	that an	active copy or active  commit  job  be
       pivoted over to the new image.

       In  --info  mode, the active job	information on the specified disk will
       be printed.  By default,	the output is a	single human-readable  summary
       line;  this  format  may	change in future versions.  Adding --raw lists
       each field of the struct, in a stable format.  If the --bytes  flag  is
       set, then the command errors out	if the server could not	supply bytes/s
       resolution; when	omitting the flag, raw output is listed	in  MiB/s  and
       human-readable  output  automatically  selects the best resolution sup-
       ported by the server.

       bandwidth can be	used to	set bandwidth limit  for  the  active  job  in
       MiB/s.  If --bytes is specified then the	bandwidth value	is interpreted
       in bytes/s. Specifying a	negative value is interpreted as  an  unsigned
       long  value or essentially unlimited. The hypervisor can	choose whether
       to reject the value or convert it to the	maximum	value allowed. Option-
       ally  a	scaled	positive  number  may  be used as bandwidth (see NOTES
       above). Using --bytes with a scaled value permits a  finer  granularity
       to  be  selected.   A scaled value used without --bytes will be rounded
       down to MiB/s. Note that	the --bytes may	be unsupported by the hypervi-
       sor.

       Note  that  the	progress  reported  for	 blockjobs  corresponding to a
       pull-mode backup	don't report progress of the backup but	 rather	 usage
       of temporary space required for the backup.

   blockpull
       Syntax:

	  blockpull domain path	[bandwidth] [--bytes] [base]
	     [--wait [--verbose] [--timeout seconds] [--async]]
	     [--keep-relative]

       Populate	 a disk	from its backing image chain. By default, this command
       flattens	the entire chain; but if base  is  specified,  containing  the
       name  of	 one of	the backing files in the chain,	then that file becomes
       the new backing file and	only the intermediate portion of the chain  is
       pulled.	 Once all requested data from the backing image	chain has been
       pulled, the disk	no longer depends  on  that  portion  of  the  backing
       chain.

       By  default, this command returns as soon as possible, and data for the
       entire disk is pulled in	the background;	the progress of	the  operation
       can  be	checked	 with blockjob.	 However, if --wait is specified, then
       this command will block until the operation completes,  or  cancel  the
       operation  if the optional timeout in seconds elapses or	SIGINT is sent
       (usually	with Ctrl-C).  Using --verbose along with --wait will  produce
       periodic	 status	 updates.   If	job cancellation is triggered, --async
       will return control to the user as fast as possible, otherwise the com-
       mand  may continue to block a little while longer until the job is done
       cleaning	up.

       Using the --keep-relative flag will keep	the backing chain names	 rela-
       tive.

       path  specifies	fully-qualified	 path of the disk; it corresponds to a
       unique target name  (<target  dev='name'/>)  or	source	file  (<source
       file='name'/>) for one of the disk devices attached to domain (see also
       domblklist for listing these names).  bandwidth specifies copying band-
       width limit in MiB/s. For further information on	the bandwidth argument
       see the corresponding section for the blockjob command.

   blockresize
       Syntax:

	  blockresize domain path size

       Resize a	block device of	domain while the domain	is running, path spec-
       ifies the absolute path of the block device; it corresponds to a	unique
       target  name   (<target	 dev='name'/>)	 or   source   file   (<source
       file='name'/>) for one of the disk devices attached to domain (see also
       domblklist for listing these names).

       size is a scaled	integer	 (see  NOTES  above)  which  defaults  to  KiB
       (blocks of 1024 bytes) if there is no suffix.  You must use a suffix of
       "B" to get bytes	(note that for historical reasons, this	 differs  from
       vol-resize which	defaults to bytes without a suffix).

   console
       Syntax:

	  console domain [devname] [--safe] [--force]

       Connect	the virtual serial console for the guest. The optional devname
       parameter refers	to the device alias of an alternate console, serial or
       parallel	device configured for the guest.  If omitted, the primary con-
       sole will be opened.

       If the flag --safe is specified,	the connection is  only	 attempted  if
       the driver supports safe	console	handling. This flag specifies that the
       server has to ensure exclusive access to	 console  devices.  Optionally
       the  --force flag may be	specified, requesting to disconnect any	exist-
       ing sessions, such as in	a case of a broken connection.

   cpu-stats
       Syntax:

	  cpu-stats domain [--total] [start] [count]

       Provide cpu statistics information of a domain. The  domain  should  be
       running.	 Default it shows stats	for all	CPUs, and a total. Use --total
       for only	the total stats, start for only	the per-cpu stats of the  CPUs
       from start, count for only count	CPUs' stats.

   create
       Syntax:

	  create FILE [--console] [--paused] [--autodestroy]
	     [--pass-fds N,M,...] [--validate]

       Create  a  domain from an XML <file>. Optionally, --validate option can
       be passed to validate the format	of the input XML file against  an  in-
       ternal  RNG  schema (identical to using virt-xml-validate(1) tool). Do-
       mains created using this	command	are going to be	either transient (tem-
       porary  ones  that  will	 vanish	once destroyed)	or existing persistent
       guests that will	run with one-time use configuration, leaving the  per-
       sistent	XML untouched (this can	come handy during an automated testing
       of various configurations all based on the original XML).  See the  ex-
       ample below for usage demonstration.

       The  domain will	be paused if the --paused option is used and supported
       by the driver; otherwise	it will	be running. If --console is requested,
       attach  to  the console after creation.	If --autodestroy is requested,
       then the	guest will be automatically destroyed when  virsh  closes  its
       connection to libvirt, or otherwise exits.

       If  --pass-fds  is specified, the argument is a comma separated list of
       open file descriptors which should be pass on into the guest. The  file
       descriptors  will be re-numbered	in the guest, starting from 3. This is
       only supported with container based virtualization.

       Example:

       1. prepare a template from an existing domain (skip directly to	3a  if
	  writing one from scratch)

	     # virsh dumpxml <domain> >	domain.xml

       2. edit the template using an editor of your choice and:

	  a. DO	CHANGE!	<name> and <uuid> (<uuid> can also be removed),	or

	  b. DON'T CHANGE! either <name> or <uuid>

	     # $EDITOR domain.xml

       3. create  a  domain from domain.xml, depending on whether following 2a
	  or 2b	respectively:

	  a. the domain	is going to be transient

	  b. an	existing persistent guest will run with	 a  modified  one-time
	     configuration

	     # virsh create domain.xml

   define
       Syntax:

	  define FILE [--validate]

       Define a	domain from an XML <file>. Optionally, the format of the input
       XML file	can be validated against an internal RNG schema	 with  --vali-
       date (identical to using	virt-xml-validate(1) tool). The	domain defini-
       tion is registered but not started.  If domain is already running,  the
       changes will take effect	on the next boot.

   desc
       Syntax:

	  desc domain [[--live]	[--config] |
	     [--current]] [--title] [--edit] [--new-desc
	     New description or	title message]

       Show or modify description and title of a domain. These values are user
       fields that allow storing arbitrary textual data	to allow easy  identi-
       fication	of domains. Title should be short, although it's not enforced.
       (See also metadata that works with XML based domain metadata.)

       Flags --live or --config	select whether this command works on  live  or
       persistent  definitions	of the domain. If both --live and --config are
       specified, the --config option takes precedence on getting the  current
       description  and	 both  live configuration and config are updated while
       setting the description.	--current is exclusive and implied if none  of
       these was specified.

       Flag  --edit  specifies that an editor with the contents	of current de-
       scription or title should be opened and the contents saved back	after-
       wards.

       Flag  --title  selects operation	on the title field instead of descrip-
       tion.

       If neither of --edit and	--new-desc are specified the note or  descrip-
       tion is displayed instead of being modified.

   destroy
       Syntax:

	  destroy domain [--graceful]

       Immediately  terminate the domain domain.  This doesn't give the	domain
       OS any chance to	react, and it's	the equivalent of  ripping  the	 power
       cord out	on a physical machine.	In most	cases you will want to use the
       shutdown	command	instead.  However, this	does not  delete  any  storage
       volumes	used  by the guest, and	if the domain is persistent, it	can be
       restarted later.

       If domain is transient, then the	metadata of any	snapshots will be lost
       once  the  guest	 stops running,	but the	snapshot contents still	exist,
       and a new domain	with the same name and UUID can	restore	 the  snapshot
       metadata	 with  snapshot-create.	 Similarly, the	metadata of any	check-
       points will be lost, but	can be restored	with checkpoint-create.

       If --graceful is	specified, don't  resort  to  extreme  measures	 (e.g.
       SIGKILL)	when the guest doesn't stop after a reasonable timeout;	return
       an error	instead.

   domblkerror
       Syntax:

	  domblkerror domain

       Show errors on block devices.  This command usually  comes  handy  when
       domstate	 command  says that a domain was paused	due to I/O error.  The
       domblkerror command lists all block devices in error state and the  er-
       ror seen	on each	of them.

   domblkinfo
       Syntax:

	  domblkinfo domain [block-device --all] [--human]

       Get block device	size info for a	domain.	 A block-device	corresponds to
       a unique	target name (<target dev='name'/>)  or	source	file  (<source
       file='name'/>) for one of the disk devices attached to domain (see also
       domblklist for listing these names). If --human is set, the output will
       have  a	human  readable	output.	 If --all is set, the output will be a
       table showing all block devices size info associated with domain.   The
       --all option takes precedence of	the others.

   domblklist
       Syntax:

	  domblklist domain [--inactive] [--details]

       Print  a	table showing the brief	information of all block devices asso-
       ciated with domain. If --inactive is specified, query the block devices
       that  will be used on the next boot, rather than	those currently	in use
       by a running domain. If --details is specified, disk  type  and	device
       value  will also	be printed. Other contexts that	require	a block	device
       name (such as domblkinfo	or snapshot-create for	disk  snapshots)  will
       accept either target or unique source names printed by this command.

   domblkstat
       Syntax:

	  domblkstat domain [block-device] [--human]

       Get  device  block  stats  for a	running	domain.	 A block-device	corre-
       sponds to a unique target name (<target dev='name'/>)  or  source  file
       (<source	 file='name'/>)	for one	of the disk devices attached to	domain
       (see also domblklist for	listing	these names). On a LXC or QEMU domain,
       omitting	 the  block-device yields device block stats summarily for the
       entire domain.

       Use --human for a more human readable output.

       Availability of these fields depends on hypervisor. Unsupported	fields
       are  missing  from the output. Other fields may appear if communicating
       with a newer version of libvirtd.

       Explanation of fields (fields appear in the following order):

       o rd_req		   - count of read operations

       o rd_bytes	   - count of read bytes

       o wr_req		   - count of write operations

       o wr_bytes	   - count of written bytes

       o errs		   - error count

       o flush_operations  - count of flush operations

       o rd_total_times	   - total time	read operations	took (ns)

       o wr_total_times	   - total time	write operations took (ns)

       o flush_total_times - total time	flush operations took (ns)

       o <-- other fields provided by hypervisor -->

   domblkthreshold
       Syntax:

	  domblkthreshold domain dev threshold

       Set the threshold value for delivering the block-threshold  event.  dev
       specifies  the disk device target or backing chain element of given de-
       vice using the 'target[1]' syntax. threshold is a scaled	value  of  the
       offset.	If  the	block device should write beyond that offset the event
       will be delivered.

   domcontrol
       Syntax:

	  domcontrol domain

       Returns state of	an interface to	VMM used to  control  a	 domain.   For
       states  other  than  "ok"  or "error" the command also prints number of
       seconds elapsed since the control interface entered its current state.

   domdirtyrate-calc
       Syntax:

	  domdirtyrate-calc <domain> [--seconds	<sec>]

       Calculate an active domain's memory dirty rate which may	be expected by
       user  in	order to decide	whether	it's proper to be migrated out or not.
       The seconds parameter can be used to calculate dirty rate in a specific
       time  which  allows 60s at most now and would be	default	to 1s if miss-
       ing. The	calculated dirty rate  information  is	available  by  calling
       'domstats --dirtyrate'.

   domdisplay
       Syntax:

	  domdisplay domain [--include-password] [[--type] type] [--all]

       Output  a  URI which can	be used	to connect to the graphical display of
       the domain via VNC, SPICE or RDP.   The	particular  graphical  display
       type  can  be  selected	using the type parameter (e.g. "vnc", "spice",
       "rdp").	If --include-password is specified, the	SPICE channel password
       will  be	 included in the URI. If --all is specified, then all show all
       possible	graphical displays, for	a VM could have	more than one  graphi-
       cal displays.

   domfsfreeze
       Syntax:

	  domfsfreeze domain [[--mountpoint] mountpoint...]

       Freeze  mounted filesystems within a running domain to prepare for con-
       sistent snapshots.

       The --mountpoint	option takes a parameter mountpoint, which is a	 mount
       point path of the filesystem to be frozen. This option can occur	multi-
       ple times. If this  is  not  specified,	every  mounted	filesystem  is
       frozen.

       Note: snapshot-create command has a --quiesce option to freeze and thaw
       the filesystems automatically to	 keep  snapshots  consistent.	domfs-
       freeze  command	is only	needed when a user wants to utilize the	native
       snapshot	features of storage devices not	supported by libvirt.

   domfsinfo
       Syntax:

	  domfsinfo domain

       Show a list of mounted filesystems within the running domain. The  list
       contains	 mountpoints, names of a mounted device	in the guest, filesys-
       tem types, and unique target names used	in  the	 domain	 XML  (<target
       dev='name'/>).

       Note that this command requires a guest agent configured	and running in
       the domain's guest OS.

   domfsthaw
       Syntax:

	  domfsthaw domain [[--mountpoint] mountpoint...]

       Thaw mounted filesystems	within	a  running  domain,  which  have  been
       frozen by domfsfreeze command.

       The  --mountpoint option	takes a	parameter mountpoint, which is a mount
       point path of the filesystem to be thawed. This option can occur	multi-
       ple  times.  If	this  is  not  specified,  every mounted filesystem is
       thawed.

   domfstrim
       Syntax:

	  domfstrim domain [--minimum bytes] [--mountpoint mountPoint]

       Issue a fstrim command on all mounted filesystems within	a running  do-
       main.  It  discards  blocks which are not in use	by the filesystem.  If
       --minimum bytes is specified, it	tells guest kernel length of  contigu-
       ous  free  range.  Smaller than this may	be ignored (this is a hint and
       the guest may not respect it). By increasing this value,	the fstrim op-
       eration	will  complete	more  quickly for filesystems with badly frag-
       mented free space, although not all blocks will be discarded.  The  de-
       fault value is zero, meaning "discard every free	block".	Moreover, if a
       user wants to trim only one mount point,	it can be  specified  via  op-
       tional --mountpoint parameter.

   domhostname
       Syntax:

	  domhostname domain [--source lease|agent]

       Returns the hostname of a domain, if the	hypervisor makes it available.

       The  --source  argument specifies what data source to use for the host-
       names, currently	'lease'	to read	DHCP leases or 'agent'	to  query  the
       guest  OS  via  an  agent.  If  unspecified, driver returns the default
       method available	(some drivers support only one type of source).

   domid
       Syntax:

	  domid	domain-name-or-uuid

       Convert a domain	name (or UUID) to a domain id

   domif-getlink
       Syntax:

	  domif-getlink	domain interface-device	[--config]

       Query link state	of the domain's	 virtual  interface.  If  --config  is
       specified,  query  the persistent configuration,	for compatibility pur-
       poses, --persistent is alias of --config.

       interface-device	can be the interface's target name or the MAC address.

   domif-setlink
       Syntax:

	  domif-setlink	domain interface-device	state [--config]

       Modify link state of the	domain's virtual  interface.  Possible	values
       for  state are "up" and "down". If --config is specified, only the per-
       sistent configuration of	the domain is modified,	for compatibility pur-
       poses,  --persistent is alias of	--config.  interface-device can	be the
       interface's target name or the MAC address.

   domifaddr
       Syntax:

	  domifaddr domain [interface] [--full]
	     [--source lease|agent|arp]

       Get a list of interfaces	of a running domain along with	their  IP  and
       MAC addresses, or limited output	just for one interface if interface is
       specified. Note that interface can be driver dependent, it can  be  the
       name within guest OS or the name	you would see in domain	XML. Moreover,
       the whole command may require a guest agent to be  configured  for  the
       queried domain under some hypervisors, notably QEMU.

       If  --full  is  specified, the interface	name and MAC address is	always
       displayed when the interface has	multiple IP addresses or aliases; oth-
       erwise,	only  the  interface name and MAC address is displayed for the
       first name and MAC address with "-" for the others using	the same  name
       and MAC address.

       The  --source  argument	specifies  what	data source to use for the ad-
       dresses,	currently 'lease' to read DHCP leases, 'agent'	to  query  the
       guest  OS  via an agent,	or 'arp' to get	IP from	host's arp tables.  If
       unspecified, 'lease' is the default.

   backup-begin
       Syntax:

	  backup-begin domain [backupxml] [checkpointxml] [--reuse-external]

       Begin a new backup job. If backupxml is omitted,	 this  defaults	 to  a
       full  backup using a push model to filenames generated by libvirt; sup-
       plying XML allows fine-tuning such as requesting	an incremental	backup
       relative	 to an earlier checkpoint, controlling which disks participate
       or which	filenames are involved,	or requesting the use of a pull	 model
       backup.	The backup-dumpxml command shows any resulting values assigned
       by   libvirt.   For   more   information	  on	backup	  XML,	  see:
       https://libvirt.org/formatbackup.html

       If --reuse-external is used it instructs	libvirt	to reuse temporary and
       output files provided by	the user in backupxml.

       If checkpointxml	is specified, a	second file with a  top-level  element
       of  domaincheckpoint  is	 used to create	a simultaneous checkpoint, for
       doing a later incremental backup	relative to the	time  the  backup  was
       created.	See checkpoint-create for more details on checkpoints.

       This  command  returns  as soon as possible, and	the backup job runs in
       the background; the progress of a push model backup can be checked with
       domjobinfo  or  by  waiting  for	an event with event (the progress of a
       pull model backup is under the control of whatever third	party connects
       to the NBD export). The job is ended with domjobabort.

   backup-dumpxml
       Syntax:

	  backup-dumpxml domain

       Output XML describing the current backup	job.

   domiflist
       Syntax:

	  domiflist domain [--inactive]

       Print  a	 table showing the brief information of	all virtual interfaces
       associated with domain. If --inactive is	specified, query  the  virtual
       interfaces  that	 will be used on the next boot,	rather than those cur-
       rently in use by	a running domain. Other	contexts that  require	a  MAC
       address	 of   virtual	interface   (such   as	 detach-interface   or
       domif-setlink) will accept the MAC address printed by this command.

   domifstat
       Syntax:

	  domifstat domain interface-device

       Get network interface stats for a running domain. The network interface
       stats are only available	for interfaces that have a physical source in-
       terface.	This does not include, for example, a  'user'  interface  type
       since  it is a virtual LAN with NAT to the outside world. interface-de-
       vice can	be the interface target	by name	or MAC address.

   domiftune
       Syntax:

	  domiftune domain interface-device [[--config]	[--live] | [--current]]
	     [*--inbound average,peak,burst,floor*]
	     [*--outbound average,peak,burst*]

       Set or query the	domain's  network  interface's	bandwidth  parameters.
       interface-device	  can	be   the   interface's	target	name  (<target
       dev='name'/>), or the MAC address.

       If no --inbound or --outbound is	specified, this	command	will query and
       show the	bandwidth settings. Otherwise, it will set the inbound or out-
       bound bandwidth.	average,peak,burst,floor is the	same as	in command at-
       tach-interface.	 Values	 for  average, peak and	floor are expressed in
       kilobytes per second, while burst is expressed in kilobytes in a	single
       burst  at  peak	speed as described in the Network XML documentation at
       https://libvirt.org/formatnetwork.html#elementQoS.

       To clear	inbound	or outbound settings, use --inbound or --outbound  re-
       spectfully with average value of	zero.

       If  --live is specified,	affect a running guest.	 If --config is	speci-
       fied, affect the	next start of a	persistent  guest.   If	 --current  is
       specified,  it is equivalent to either --live or	--config, depending on
       the current state of the	guest.	Both --live and	--config flags may  be
       given, but --current is exclusive. If no	flag is	specified, behavior is
       different depending on hypervisor.

   dominfo
       Syntax:

	  dominfo domain

       Returns basic information about the domain.

   domjobabort
       Syntax:

	  domjobabort domain

       Abort the currently running domain job.

   domjobinfo
       Syntax:

	  domjobinfo domain [--completed [--keep-completed]] [--anystats] [--rawstats]

       Returns information about jobs running on a domain.  --completed	 tells
       virsh  to  return information about a recently finished job. Statistics
       of a completed  job  are	 automatically	destroyed  once	 read  (unless
       --keep-completed	is used) or when libvirtd is restarted.

       Normally	 only statistics for running and successful completed jobs are
       printed.	 --anystats can	be used	to also	display	statistics for	failed
       jobs.

       In case --rawstats is used, all fields are printed as received from the
       server without any attempts to interpret	 the  data.  The  "Job	type:"
       field is	special, since it's reported by	the API	and not	part of	stats.

       Note  that  time	 information  returned for completed migrations	may be
       completely irrelevant unless both source	 and  destination  hosts  have
       synchronized time (i.e.,	NTP daemon is running on both of them).

   dommemstat
       Syntax:

	  dommemstat domain [--period seconds] [[--config] [--live] | [--current]]

       Get memory stats	for a running domain.

       Availability  of	these fields depends on	hypervisor. Unsupported	fields
       are missing from	the output. Other fields may appear  if	 communicating
       with a newer version of libvirtd.

       Explanation of fields:

       o swap_in	   - The amount	of data	read from swap space (in KiB)

       o swap_out	    -  The  amount of memory written out to swap space
	 (in KiB)

       o major_fault	   - The number	of page	faults where disk IO  was  re-
	 quired

       o minor_fault	   - The number	of other page faults

       o unused		    -  The  amount of memory left unused by the	system
	 (in KiB)

       o available	   - The amount	of usable memory as seen by the	domain
	 (in KiB)

       o actual		   - Current balloon value (in KiB)

       o rss		   - Resident Set Size of the running domain's process
	 (in KiB)

       o usable		   - The amount	of memory which	can  be	 reclaimed  by
	 balloon without causing host swapping (in KiB)

       o last-update	    -  Timestamp  of the last update of	statistics (in
	 seconds)

       o disk_caches	   - The amount	of memory that can be reclaimed	 with-
	 out additional	I/O, typically disk caches (in KiB)

       o hugetlb_pgalloc    -  The  number of successful huge page allocations
	 initiated from	within the domain

       o hugetlb_pgfail	   - The number	of failed huge page allocations	initi-
	 ated from within the domain

       For  QEMU/KVM with a memory balloon, setting the	optional --period to a
       value larger than 0 in seconds will allow the balloon driver to	return
       additional  statistics which will be displayed by subsequent dommemstat
       commands. Setting the --period to 0 will	stop the balloon  driver  col-
       lection,	 but  does not clear the statistics in the balloon driver. Re-
       quires at least QEMU/KVM	1.5 to be running on the host.

       The --live, --config, and --current flags are only valid	when using the
       --period	 option	 in order to set the collection	period for the balloon
       driver. If --live is specified, only the	running	guest  collection  pe-
       riod  is	affected. If --config is specified, affect the next start of a
       persistent guest. If --current is specified, it is equivalent to	either
       --live or --config, depending on	the current state of the guest.

       Both  --live  and  --config flags may be	given, but --current is	exclu-
       sive. If	no flag	is specified, behavior is different depending  on  the
       guest state.

   domname
       Syntax:

	  domname domain-id-or-uuid

       Convert a domain	Id (or UUID) to	domain name

   dompmsuspend
       Syntax:

	  dompmsuspend domain target [--duration]

       Suspend a running domain	into one of these states (possible target val-
       ues):

       o mem - equivalent of S3	ACPI state

       o disk -	equivalent of S4 ACPI state

       o hybrid	- RAM is saved to disk but not powered off

       The --duration argument specifies number	of seconds before  the	domain
       is woken	up after it was	suspended (see also dompmwakeup). Default is 0
       for unlimited suspend time. (This feature isn't currently supported  by
       any hypervisor driver and 0 should be used.).

       Note that this command requires a guest agent configured	and running in
       the domain's guest OS.

       Beware that at least for	QEMU, the domain's process will	be  terminated
       when  target  disk is used and a	new process will be launched when lib-
       virt is asked to	wake up	the domain. As a result	of this,  any  runtime
       changes,	 such  as  device  hotplug or memory settings, are lost	unless
       such changes were made with --config flag.

   dompmwakeup
       Syntax:

	  dompmwakeup domain

       Wakeup a	domain from pmsuspended	state (either suspended	 by  dompmsus-
       pend or from the	guest itself). Injects a wakeup	into the guest that is
       in pmsuspended state, rather than waiting for the previously  requested
       duration	 (if  any) to elapse. This operation does not necessarily fail
       if the domain is	running.

   domrename
       Syntax:

	  domrename domain new-name

       Rename a	domain.	This command changes current domain name  to  the  new
       name specified in the second argument.

       Note: Domain must be inactive.

   domstate
       Syntax:

	  domstate domain [--reason]

       Returns	state about a domain.  --reason	tells virsh to also print rea-
       son for the state.

   domstats
       Syntax:

	  domstats [--raw] [--enforce] [--backing] [--nowait] [--state]
	     [--cpu-total] [--balloon] [--vcpu]	[--interface]
	     [--block] [--perf]	[--iothread] [--memory]	[--dirtyrate]
	     [[--list-active] [--list-inactive]
	      [--list-persistent] [--list-transient] [--list-running]y
	      [--list-paused] [--list-shutoff] [--list-other]] | [domain ...]

       Get statistics for multiple or all domains. Without any	argument  this
       command prints all available statistics for all domains.

       The  list of domains to gather stats for	can be either limited by list-
       ing the domains as a space separated list, or by	specifying one of  the
       filtering flags --list-NNN. (The	approaches can't be combined.)

       By  default  some of the	returned fields	may be converted to more human
       friendly	values by a set	of pretty-printers. To suppress	this  behavior
       use the --raw flag.

       The  individual statistics groups are selectable	via specific flags. By
       default all supported statistics	groups are returned. Supported statis-
       tics  groups  flags are:	--state, --cpu-total, --balloon, --vcpu, --in-
       terface,	--block, --perf, --iothread, --memory, --dirtyrate.

       Note that - depending on	the hypervisor type and	version	or the	domain
       state - not all of the following	statistics may be returned.

       When selecting the --state group	the following fields are returned:

       o state.state - state of	the VM,	returned as number from	virDomainState
	 enum

       o state.reason -	reason for entering given state, returned as int  from
	 virDomain*Reason enum corresponding to	given state

       --cpu-total returns:

       o cpu.time - total cpu time spent for this domain in nanoseconds

       o cpu.user - user cpu time spent	in nanoseconds

       o cpu.system - system cpu time spent in nanoseconds

       o cpu.cache.monitor.count  -  the number	of cache monitors for this do-
	 main

       o cpu.cache.monitor.<num>.name -	the name of cache monitor <num>

       o cpu.cache.monitor.<num>.vcpus - vcpu list of cache monitor <num>

       o cpu.cache.monitor.<num>.bank.count - the number  of  cache  banks  in
	 cache monitor <num>

       o cpu.cache.monitor.<num>.bank.<index>.id - host	allocated cache	id for
	 bank <index> in cache monitor <num>

       o cpu.cache.monitor.<num>.bank.<index>.bytes - the number of  bytes  of
	 last level cache that the domain is using on cache bank <index>

       --balloon returns:

       o balloon.current - the memory in KiB currently used

       o balloon.maximum - the maximum memory in KiB allowed

       o balloon.swap_in - the amount of data read from	swap space (in KiB)

       o balloon.swap_out - the	amount of memory written out to	swap space (in
	 KiB)

       o balloon.major_fault - the number of page faults when disk IO was  re-
	 quired

       o balloon.minor_fault - the number of other page	faults

       o balloon.unused	 -  the	amount of memory left unused by	the system (in
	 KiB)

       o balloon.available - the amount	of usable memory as seen by the	domain
	 (in KiB)

       o balloon.rss - Resident	Set Size of running domain's process (in KiB)

       o balloon.usable	 - the amount of memory	which can be reclaimed by bal-
	 loon without causing host swapping (in	KiB)

       o balloon.last-update - timestamp of the	last update of statistics  (in
	 seconds)

       o balloon.disk_caches  -	 the  amount  of  memory that can be reclaimed
	 without additional I/O, typically disk	(in KiB)

       o balloon.hugetlb_pgalloc - the number of successful huge page  alloca-
	 tions from inside the domain via virtio balloon

       o balloon.hugetlb_pgfail	 -  the	number of failed huge page allocations
	 from inside the domain	via virtio balloon

       --vcpu returns:

       o vcpu.current -	current	number of online virtual CPUs

       o vcpu.maximum -	maximum	number of online virtual CPUs

       o vcpu.<num>.state - state of the virtual CPU  <num>,  as  number  from
	 virVcpuState enum

       o vcpu.<num>.time - virtual cpu time spent by virtual CPU <num> (in mi-
	 croseconds)

       o vcpu.<num>.wait - virtual cpu time spent by virtual CPU <num> waiting
	 on I/O	(in microseconds)

       o vcpu.<num>.halted - virtual CPU <num> is halted: yes or no (may indi-
	 cate the processor is idle or even disabled, depending	on the	archi-
	 tecture)

       o vcpu.<num>.delay  -  time  the	 vCPU <num> thread was enqueued	by the
	 host scheduler, but was waiting in the	queue instead of running.  Ex-
	 posed to the VM as a steal time.

       --interface returns:

       o net.count - number of network interfaces on this domain

       o net.<num>.name	- name of the interface	<num>

       o net.<num>.rx.bytes - number of	bytes received

       o net.<num>.rx.pkts - number of packets received

       o net.<num>.rx.errs - number of receive errors

       o net.<num>.rx.drop - number of receive packets dropped

       o net.<num>.tx.bytes - number of	bytes transmitted

       o net.<num>.tx.pkts - number of packets transmitted

       o net.<num>.tx.errs - number of transmission errors

       o net.<num>.tx.drop - number of transmit	packets	dropped

       --perf returns the statistics of	all enabled perf events:

       o perf.cmt - the	cache usage in Byte currently used

       o perf.mbmt - total system bandwidth from one level of cache

       o perf.mbml - bandwidth of memory traffic for a memory controller

       o perf.cpu_cycles - the count of	cpu cycles (total/elapsed)

       o perf.instructions - the count of instructions

       o perf.cache_references - the count of cache hits

       o perf.cache_misses - the count of caches misses

       o perf.branch_instructions - the	count of branch	instructions

       o perf.branch_misses - the count	of branch misses

       o perf.bus_cycles - the count of	bus cycles

       o perf.stalled_cycles_frontend  - the count of stalled frontend cpu cy-
	 cles

       o perf.stalled_cycles_backend - the count of stalled backend cpu	cycles

       o perf.ref_cpu_cycles - the count of ref	cpu cycles

       o perf.cpu_clock	- the count of cpu clock time

       o perf.task_clock - the count of	task clock time

       o perf.page_faults - the	count of page faults

       o perf.context_switches - the count of context switches

       o perf.cpu_migrations - the count of cpu	migrations

       o perf.page_faults_min -	the count of minor page	faults

       o perf.page_faults_maj -	the count of major page	faults

       o perf.alignment_faults - the count of alignment	faults

       o perf.emulation_faults - the count of emulation	faults

       See the perf command for	more details about each	event.

       --block returns information about disks associated  with	 each  domain.
       Using  the  --backing  flag  extends  this information to cover all re-
       sources in the backing chain, rather than the default of	 limiting  in-
       formation  to the active	layer for each guest disk.  Information	listed
       includes:

       o block.count - number of block devices being listed

       o block.<num>.name - name of the	target of the block device <num>  (the
	 same name for multiple	entries	if --backing is	present)

       o block.<num>.backingIndex - when --backing is present, matches up with
	 the <backingStore> index listed in domain XML for backing files

       o block.<num>.path - file source	of block device	<num>, if it is	a  lo-
	 cal file or block device

       o block.<num>.rd.reqs - number of read requests

       o block.<num>.rd.bytes -	number of read bytes

       o block.<num>.rd.times -	total time (ns)	spent on reads

       o block.<num>.wr.reqs - number of write requests

       o block.<num>.wr.bytes -	number of written bytes

       o block.<num>.wr.times -	total time (ns)	spent on writes

       o block.<num>.fl.reqs - total flush requests

       o block.<num>.fl.times -	total time (ns)	spent on cache flushing

       o block.<num>.errors - Xen only:	the 'oo_req' value

       o block.<num>.allocation	- offset of highest written sector in bytes

       o block.<num>.capacity -	logical	size of	source file in bytes

       o block.<num>.physical -	physical size of source	file in	bytes

       o block.<num>.threshold	-  threshold  (in  bytes)  for	delivering the
	 VIR_DOMAIN_EVENT_ID_BLOCK_THRESHOLD event. See	domblkthreshold.

       --iothread returns information about IOThreads on the running guest  if
       supported by the	hypervisor.

       The  "poll-max-ns"  for each thread is the maximum nanoseconds to allow
       each polling interval to	occur. A polling interval is a period of  time
       allowed	for  a	thread to process data before being the	guest gives up
       its CPU quantum back to the host. A value set too small will not	 allow
       the  IOThread  to run long enough on a CPU to process data. A value set
       too high	will consume too much CPU time per IOThread failing  to	 allow
       other  threads  running on the CPU to get time. The polling interval is
       not available for statistical purposes.

       o

	 iothread.count	- maximum number of IOThreads in the subsequent	list
		as unsigned int. Each IOThread in the list will	will use  it's
		iothread_id value as the <id>. There may be fewer <id> entries
		than the iothread.count	value if the polling  values  are  not
		supported.

       o iothread.<id>.poll-max-ns  - maximum polling time in nanoseconds used
	 by the	<id> IOThread. A value of 0 (zero) indicates polling  is  dis-
	 abled.

       o iothread.<id>.poll-grow  -  polling  time  grow  value.  A value of 0
	 (zero)	growth is managed by the hypervisor.

       o iothread.<id>.poll-shrink - polling time shrink  value.  A  value  of
	 (zero)	indicates shrink is managed by hypervisor.

       --memory	returns:

       o memory.bandwidth.monitor.count	- the number of	memory bandwidth moni-
	 tors for this domain

       o memory.bandwidth.monitor.<num>.name  -	the name of monitor <num>

       o memory.bandwidth.monitor.<num>.vcpus -	the vcpu list of monitor <num>

       o

	 memory.bandwidth.monitor.<num>.node.count - the number	of memory
		controller in monitor <num>

       o memory.bandwidth.monitor.<num>.node.<index>.id	- host allocated  mem-
	 ory controller	id for controller <index> of monitor <num>

       o memory.bandwidth.monitor.<num>.node.<index>.bytes.local - the accumu-
	 lative	bytes consumed by @vcpus that passing through the memory  con-
	 troller in the	same processor that the	scheduled host CPU belongs to.

       o memory.bandwidth.monitor.<num>.node.<index>.bytes.total  -  the total
	 bytes consumed	by @vcpus that passing through all memory controllers,
	 either	local or remote	controller.

       --dirtyrate returns:

       o dirtyrate.calc_status - the status of last memory dirty rate calcula-
	 tion, returned	as number from virDomainDirtyRateStatus	enum.

       o dirtyrate.calc_start_time - the start time of last memory dirty  rate
	 calculation.

       o dirtyrate.calc_period - the period of last memory dirty rate calcula-
	 tion.

       o dirtyrate.megabytes_per_second	- the calculated memory	dirty rate  in
	 MiB/s.

       Selecting  a specific statistics	groups doesn't guarantee that the dae-
       mon supports the	selected group of stats.  Flag	--enforce  forces  the
       command to fail if the daemon doesn't support the selected group.

       When  collecting	 stats	libvirtd may wait for some time	if there's al-
       ready another job running on given domain for it	to finish.   This  may
       cause  unnecessary delay	in delivering stats. Using --nowait suppresses
       this behaviour. On the other hand some statistics might be missing  for
       such domain.

   domtime
       Syntax:

	  domtime domain { [--now] [--pretty] [--sync] [--time time] }

       Gets  or	 sets the domain's system time.	When run without any arguments
       (but domain), the current domain's system  time	is  printed  out.  The
       --pretty	 modifier can be used to print the time	in more	human readable
       form.

       When --time time	is specified, the domain's time	is not gotten but  set
       instead.	 The  --now  modifier  acts like if it was an alias for	--time
       $now, which means it sets the time that is currently on the host	 virsh
       is  running at. In both cases (setting and getting), time is in seconds
       relative	to Epoch of 1970-01-01 in UTC.	The --sync  modifies  the  set
       behavior	a bit: The time	passed is ignored, but the time	to set is read
       from domain's RTC instead. Please note, that some hypervisors  may  re-
       quire  a	 guest agent to	be configured in order to get or set the guest
       time.

   domuuid
       Syntax:

	  domuuid domain-name-or-id

       Convert a domain	name or	id to domain UUID

   domxml-from-native
       Syntax:

	  domxml-from-native format config

       Convert the file	config in the native guest configuration format	 named
       by  format  to a	domain XML format. For QEMU/KVM	hypervisor, the	format
       argument	must be	qemu-argv. For Xen hypervisor, the format argument may
       be xen-xm, xen-xl, or xen-sxpr. For LXC hypervisor, the format argument
       must be lxc-tools. For VMware/ESX hypervisor, the format	argument  must
       be  vmware-vmx.	 For the Bhyve hypervisor, the format argument must be
       bhyve-argv.

   domxml-to-native
       Syntax:

	  domxml-to-native format { [--xml] xml	| --domain domain-name-or-id-or-uuid }

       Convert the file	xml into domain	XML  format  or	 convert  an  existing
       --domain	to the native guest configuration format named by format.  The
       xml and --domain	arguments are mutually exclusive.  For	the  types  of
       format argument,	refer to domxml-from-native.

   dump
       Syntax:

	  dump domain corefilepath [--bypass-cache]
	     { [--live]	| [--crash] | [--reset]	}
	     [--verbose] [--memory-only] [--format string]

       Dumps the core of a domain to a file for	analysis.  If --live is	speci-
       fied, the domain	continues to run until	the  core  dump	 is  complete,
       rather  than  pausing up	front.	If --crash is specified, the domain is
       halted with a crashed status, rather  than  merely  left	 in  a	paused
       state.	If  --reset is specified, the domain is	reset after successful
       dump.  Note, these three	switches are  mutually	exclusive.   If	 --by-
       pass-cache is specified,	the save will avoid the	file system cache, al-
       though this may slow down the operation.	 If  --memory-only  is	speci-
       fied,  the  file	is elf file, and will only include domain's memory and
       cpu common register value. It is	very useful if the  domain  uses  host
       devices	directly.   --format  string  is used to specify the format of
       'memory-only'   dump,   and   string    can    be    one	   of:	  elf,
       kdump-zlib(kdump-compressed	format	    with     zlib-compressed),
       kdump-lzo(kdump-compressed      format	   with	      lzo-compressed),
       kdump-snappy(kdump-compressed	 format	   with	   snappy-compressed),
       win-dmp(Windows full crashdump format).

       The progress may	be monitored using domjobinfo virsh command  and  can-
       celed  with  domjobabort	 command (sent by another virsh	instance). An-
       other option is to send SIGINT  (usually	 with  Ctrl-C)	to  the	 virsh
       process running dump command. --verbose displays	the progress of	dump.

       NOTE:  Some  hypervisors	may require the	user to	manually ensure	proper
       permissions on file and path specified by argument corefilepath.

       NOTE: Crash dump	in a old kvmdump format	is being obsolete  and	cannot
       be  loaded  and	processed  by crash utility since its version 6.1.0. A
       --memory-only option is required	in order to  produce  valid  ELF  file
       which can be later processed by the crash utility.

   dumpxml
       Syntax:

	  dumpxml domain [--inactive] [--security-info]	[--update-cpu] [--migratable]

       Output the domain information as	an XML dump to stdout, this format can
       be used by the create command. Additional  options  affecting  the  XML
       dump  may  be used. --inactive tells virsh to dump domain configuration
       that will be used on next start of the domain as	opposed	to the current
       domain configuration.  Using --security-info will also include security
       sensitive information in	the XML	dump. --update-cpu updates domain  CPU
       requirements  according	to host	CPU. With --migratable one can request
       an XML that is suitable for migrations,	i.e.,  compatible  with	 older
       libvirt	releases  and possibly amended with internal run-time options.
       This option may automatically enable other options (--update-cpu, --se-
       curity-info, ...) as necessary.

   edit
       Syntax:

	  edit domain

       Edit  the  XML  configuration  file for a domain, which will affect the
       next boot of the	guest.

       This is equivalent to:

	  virsh	dumpxml	--inactive --security-info domain > domain.xml
	  vi domain.xml	(or make changes with your other text editor)
	  virsh	define domain.xml

       except that it does some	error checking.

       The editor used can be supplied by the $VISUAL or  $EDITOR  environment
       variables, and defaults to vi.

   emulatorpin
       Syntax:

	  emulatorpin domain [cpulist] [[--live] [--config]  | [--current]]

       Query or	change the pinning of domain's emulator	threads	to host	physi-
       cal CPUs.

       See vcpupin for cpulist.

       If --live is specified, affect a	running	guest.	If --config is	speci-
       fied,  affect  the  next	 start of a persistent guest.  If --current is
       specified, it is	equivalent to either --live or --config, depending  on
       the  current state of the guest.	 Both --live and --config flags	may be
       given if	cpulist	is present, but	--current is exclusive.	 If no flag is
       specified, behavior is different	depending on hypervisor.

   event
       Syntax:

	  event	{[domain] { event | --all } [--loop] [--timeout	seconds] [--timestamp] | --list}

       Wait  for  a class of domain events to occur, and print appropriate de-
       tails of	events as they happen.	The events can optionally be  filtered
       by  domain.   Using  --list as the only argument	will provide a list of
       possible	event values known by this  client,  although  the  connection
       might  not allow	registering for	all these events.  It is also possible
       to use --all instead of event to	register for all possible event	 types
       at once.

       By default, this	command	is one-shot, and returns success once an event
       occurs; you can send SIGINT (usually via	Ctrl-C)	to  quit  immediately.
       If  --timeout is	specified, the command gives up	waiting	for events af-
       ter seconds have	elapsed.   With	--loop,	the command prints all	events
       until a timeout or interrupt key.

       When  --timestamp  is  used, a human-readable timestamp will be printed
       before the event.

   get-user-sshkeys
       Syntax:

	  get-user-sshkeys domain user

       Print SSH authorized keys for given user	in the	guest  domain.	Please
       note,  that  an	entry in the file has internal structure as defined by
       sshd(8) and virsh/libvirt does handle keys as opaque strings, i.e. does
       not interpret them.

   guest-agent-timeout
       Syntax:

	  guest-agent-timeout domain [--timeout	value]

       Set  how	 long to wait for a response from guest	agent commands.	By de-
       fault, agent commands block forever waiting for a response. value  must
       be  a  positive	value (wait for	given amount of	seconds) or one	of the
       following values:

       o -2 - block forever waiting for	a result (used when --timeout is omit-
	 ted),

       o -1  - reset timeout to	the default value (currently defined as	5 sec-
	 onds in libvirt daemon),

       o 0 - do	not wait at all,

   guestinfo
       Syntax:

	  guestinfo domain [--user] [--os] [--timezone]	[--hostname] [--filesystem]
	     [--disk]

       Print information about the guest from the point	of view	of  the	 guest
       agent.	Note that this command requires	a guest	agent to be configured
       and running in the domain's guest OS.

       When run	without	any arguments, this  command  prints  all  information
       types that are supported	by the guest agent. You	can limit the types of
       information that	are returned by	specifying one or more	flags.	 If  a
       requested information type is not supported, the	processes will provide
       an exit code of 1.  Available information types flags are --user, --os,
       --timezone, --hostname, --filesystem and	--disk.

       Note that depending on the hypervisor type and the version of the guest
       agent running within the	domain,	not all	of the	following  information
       may be returned.

       When selecting the --user information type, the following fields	may be
       returned:

       o user.count - the number of active users on this domain

       o user.<num>.name - username of user <num>

       o user.<num>.domain - domain of the user	<num> (may only	be present  on
	 certain guets types)

       o user.<num>.login-time	- the login time of user <num> in milliseconds
	 since the epoch

       --os returns:

       o os.id - a string identifying the operating system

       o os.name - the name of the operating system

       o os.pretty-name	- a pretty name	for the	operating system

       o os.version - the version of the operating system

       o os.version-id - the version id	of the operating system

       o os.kernel-release - the release of the	operating system kernel

       o os.kernel-version - the version of the	operating system kernel

       o os.machine - the machine hardware name

       o os.variant - a	specific variant or edition of the operating system

       o os.variant-id - the id	for a specific variant or edition of the oper-
	 ating system

       --timezone returns:

       o timezone.name - the name of the timezone

       o timezone.offset - the offset to UTC in	seconds

       --hostname returns:

       o hostname - the	hostname of the	domain

       --filesystem returns:

       o fs.count - the	number of filesystems defined on this domain

       o fs.<num>.mountpoint  -	 the  path  to	the mount point	for filesystem
	 <num>

       o fs.<num>.name - device	name in	the guest (e.g.	sda1)  for  filesystem
	 <num>

       o fs.<num>.fstype - the type of filesystem <num>

       o fs.<num>.total-bytes -	the total size of filesystem <num>

       o fs.<num>.used-bytes - the number of bytes used	in filesystem <num>

       o fs.<num>.disk.count  -	 the  number  of  disks	targeted by filesystem
	 <num>

       o fs.<num>.disk.<num>.alias - the device	alias of disk <num> (e.g. sda)

       o fs.<num>.disk.<num>.serial - the serial number	of disk	<num>

       o fs.<num>.disk.<num>.device - the device node of disk <num>

       --disk returns:

       o disk.count - the number of disks defined on this domain

       o disk.<num>.name - device node (Linux) or device UNC (Windows)

       o disk.<num>.partition -	whether	this is	a partition or disk

       o disk.<num>.dependency.count - the number of device dependencies

       o disk.<num>.dependency.<num>.name - a dependency name

       o disk.<num>.serial -  optional disk serial number

       o disk.<num>.alias - the	device alias of	the disk (e.g. sda)

       o disk.<num>.guest_alias	- optional alias assigned to the disk

   guestvcpus
       Syntax:

	  guestvcpus domain [[--enable]	| [--disable]] [cpulist]

       Query or	change state of	vCPUs from guest's point  of  view  using  the
       guest  agent.   When  invoked  without cpulist the guest	is queried for
       available guest vCPUs, their state and possibility to be	offlined.

       If cpulist is provided then one of --enable or --disable	must  be  pro-
       vided too. The desired operation	is then	executed on the	domain.

       See vcpupin for information on cpulist.

   iothreadadd
       Syntax:

	  iothreadadd domain iothread_id [[--config] [--live] |	[--current]]

       Add  a  new IOThread to the domain using	the specified iothread_id.  If
       the iothread_id already exists, the command will	fail. The  iothread_id
       must be greater than zero.

       If  --live  is  specified,  affect a running guest. If the guest	is not
       running an error	is returned.  If --config  is  specified,  affect  the
       next  start  of	a  persistent guest.  If --current is specified, it is
       equivalent to either --live or --config,	depending on the current state
       of the guest.

   iothreaddel
       Syntax:

	  iothreaddel domain iothread_id [[--config] [--live] |	[--current]]

       Delete an IOThread from the domain using	the specified iothread_id.  If
       an IOThread is currently	assigned to a disk resource such  as  via  the
       attach-disk command, then the attempt to	remove the IOThread will fail.
       If the iothread_id does not exist an error will occur.

       If --live is specified, affect a	running	guest. If  the	guest  is  not
       running	an  error  is  returned.  If --config is specified, affect the
       next start of a persistent guest.  If --current	is  specified,	it  is
       equivalent to either --live or --config,	depending on the current state
       of the guest.

   iothreadinfo
       Syntax:

	  iothreadinfo domain [[--live]	[--config] | [--current]]

       Display basic domain IOThreads information including  the  IOThread  ID
       and the CPU Affinity for	each IOThread.

       If  --live is specified,	get the	IOThreads data from the	running	guest.
       If the guest is not running, an error  is  returned.   If  --config  is
       specified,  get	the IOThreads data from	the next start of a persistent
       guest.  If --current is specified or --live and --config	are not	speci-
       fied,  then  get	 the  IOThread	data based on the current guest	state,
       which can either	be live	or offline.

   iothreadpin
       Syntax:

	  iothreadpin domain iothread cpulist [[--live]	[--config] | [--current]]

       Change the pinning of a domain IOThread to host physical	CPUs. In order
       to  retrieve  a	list of	all IOThreads, use iothreadinfo. To pin	an io-
       thread specify the cpulist desired for the IOThread ID as listed	in the
       iothreadinfo output.

       cpulist	is a list of physical CPU numbers. Its syntax is a comma sepa-
       rated list and a	special	markup using '-' and '^' (ex. '0-4', '0-3,^2')
       can  also be allowed. The '-' denotes the range and the '^' denotes ex-
       clusive.	 If you	want to	reset iothreadpin setting, that	is, to pin  an
       iothread	to all physical	cpus, simply specify 'r' as a cpulist.

       If  --live  is  specified,  affect a running guest. If the guest	is not
       running,	an error is returned.  If --config is  specified,  affect  the
       next  start  of	a  persistent guest.  If --current is specified, it is
       equivalent to either --live or --config,	depending on the current state
       of  the	guest.	Both --live and	--config flags may be given if cpulist
       is present, but --current is exclusive.	If no flag is  specified,  be-
       havior is different depending on	hypervisor.

       Note: The expression is sequentially evaluated, so "0-15,^8" is identi-
       cal to "9-14,0-7,15" but	not identical to "^8,0-15".

   iothreadset
       Syntax:

	  iothreadset domain iothread_id [[--poll-max-ns ns] [--poll-grow factor]
	     [--poll-shrink divisor]]
	     [[--config] [--live] | [--current]]

       Modifies	an existing iothread of	the domain  using  the	specified  io-
       thread_id.  The	--poll-max-ns provides the maximum polling interval to
       be allowed for an IOThread in ns. If  a	0  (zero)  is  provided,  then
       polling for the IOThread	is disabled.  The --poll-grow is the factor by
       which the current polling time will be adjusted in order	to  reach  the
       maximum	polling	time. If a 0 (zero) is provided, then the default fac-
       tor will	be used. The --poll-shrink is the quotient by which  the  cur-
       rent  polling  time  will  be reduced in	order to get below the maximum
       polling interval. If a 0	(zero) is provided, then the default  quotient
       will  be	 used.	The  polling  values  are purely dynamic for a running
       guest. Saving, destroying, stopping, etc. the guest will	result in  the
       polling	values returning to hypervisor defaults	at the next start, re-
       store, etc.

       If --live is specified, affect a	running	guest. If  the	guest  is  not
       running	an  error is returned.	If --current is	specified or --live is
       not specified, then handle as if	--live was  specified.	 (Where	 "cur-
       rent" here means	whatever the present guest state is: live or offline.)

   managedsave
       Syntax:

	  managedsave domain [--bypass-cache] [{--running | --paused}] [--verbose]

       Save  and  destroy (stop) a running domain, so it can be	restarted from
       the same	state at a later time.	When the virsh start command  is  next
       run  for	 the  domain, it will automatically be started from this saved
       state.  If --bypass-cache is specified, the save	will  avoid  the  file
       system cache, although this may slow down the operation.

       The  progress  may be monitored using domjobinfo	virsh command and can-
       celed with domjobabort command (sent by another	virsh  instance).  An-
       other  option  is  to  send  SIGINT  (usually with Ctrl-C) to the virsh
       process running managedsave command. --verbose displays the progress of
       save.

       Normally, starting a managed save will decide between running or	paused
       based on	the state the domain was in when the save  was	done;  passing
       either the --running or --paused	flag will allow	overriding which state
       the start should	use.

       The dominfo command can be used to query	whether	a domain currently has
       any managed save	image.

   managedsave-define
       Syntax:

	  managedsave-define domain xml	[{--running | --paused}]

       Update  the  domain XML that will be used when domain is	later started.
       The xml argument	must be	a file name containing	the  alternative  XML,
       with  changes only in the host-specific portions	of the domain XML. For
       example,	it can be used to change disk file paths.

       The managed save	image records whether the domain should	be started  to
       a  running  or paused state.  Normally, this command does not alter the
       recorded	state; passing either the --running or --paused	flag will  al-
       low overriding which state the start should use.

   managedsave-dumpxml
       Syntax:

	  managedsave-dumpxml domain [--security-info]

       Extract	the  domain XML	that was in effect at the time the saved state
       file file was created with  the	managedsave  command.	Using  --secu-
       rity-info will also include security sensitive information.

   managedsave-edit
       Syntax:

	  managedsave-edit domain [{--running |	--paused}]

       Edit  the XML configuration associated with a saved state file of a do-
       main was	created	by the managedsave command.

       The managed save	image records whether the domain should	be started  to
       a  running  or paused state.  Normally, this command does not alter the
       recorded	state; passing either the --running or --paused	flag will  al-
       low overriding which state the restore should use.

       This is equivalent to:

	  virsh	managedsave-dumpxml domain-name	> state-file.xml
	  vi state-file.xml (or	make changes with your other text editor)
	  virsh	managedsave-define domain-name state-file-xml

       except that it does some	error checking.

       The  editor  used can be	supplied by the	$VISUAL	or $EDITOR environment
       variables, and defaults to vi.

   managedsave-remove
       Syntax:

	  managedsave-remove domain

       Remove the managedsave state file for a domain, if it exists.  This en-
       sures the domain	will do	a full boot the	next time it is	started.

   maxvcpus
       Syntax:

	  maxvcpus [type]

       Provide	the maximum number of virtual CPUs supported for a guest VM on
       this connection.	 If provided, the type parameter must be a valid  type
       attribute for the <domain> element of XML.

   memtune
       Syntax:

	  memtune domain [--hard-limit size] [--soft-limit size] [--swap-hard-limit size]
	     [--min-guarantee size] [[--config]	[--live] | [--current]]

       Allows  you  to	display	 or  set the domain memory parameters. Without
       flags, the current settings are displayed; with a flag, the appropriate
       limit  is  adjusted  if	supported by the hypervisor.  LXC and QEMU/KVM
       support --hard-limit, --soft-limit, and --swap-hard-limit.  --min-guar-
       antee  is  supported  only by ESX hypervisor.  Each of these limits are
       scaled integers (see NOTES above), with a default of kibibytes  (blocks
       of  1024	bytes) if no suffix is present.	Libvirt	rounds up to the near-
       est kibibyte.  Some hypervisors require a larger	granularity than  KiB,
       and requests that are not an even multiple will be rounded up.  For ex-
       ample,  vSphere/ESX  rounds  the	 parameter  up	to   mebibytes	 (1024
       kibibytes).

       If  --live is specified,	affect a running guest.	 If --config is	speci-
       fied, affect the	next start of a	persistent  guest.   If	 --current  is
       specified,  it is equivalent to either --live or	--config, depending on
       the current state of the	guest.	Both --live and	--config flags may  be
       given, but --current is exclusive. If no	flag is	specified, behavior is
       different depending on hypervisor.

       For QEMU/KVM, the parameters are	applied	 to  the  QEMU	process	 as  a
       whole.	Thus, when counting them, one needs to add up guest RAM, guest
       video RAM, and some memory overhead of QEMU itself.  The	last piece  is
       hard to determine so one	needs guess and	try.

       For  LXC,  the displayed	hard_limit value is the	current	memory setting
       from the	XML or the results from	a virsh	setmem command.

       o --hard-limit

	 The maximum memory the	guest can use.

       o --soft-limit

	 The memory limit to enforce during memory contention.

       o --swap-hard-limit

	 The maximum memory plus swap the guest	can use.  This has to be  more
	 than hard-limit value provided.

       o --min-guarantee

	 The guaranteed	minimum	memory allocation for the guest.

       Specifying -1 as	a value	for these limits is interpreted	as unlimited.

   metadata
       Syntax:

	  metadata domain [[--live] [--config] | [--current]]
	     [--edit] [uri] [key] [set]	[--remove]

       Show  or	modify custom XML metadata of a	domain.	The metadata is	a user
       defined XML that	allows storing arbitrary XML data in the domain	 defi-
       nition.	 Multiple separate custom metadata pieces can be stored	in the
       domain XML.  The	pieces are identified by a private XML namespace  pro-
       vided  via  the	uri  argument.	(See also desc that works with textual
       metadata	of a domain.)

       Flags --live or --config	select whether this command works on  live  or
       persistent  definitions	of the domain. If both --live and --config are
       specified, the --config option takes precedence on getting the  current
       description  and	 both  live configuration and config are updated while
       setting the description.	--current is exclusive and implied if none  of
       these was specified.

       Flag  --remove specifies	that the metadata element specified by the uri
       argument	should be removed rather than updated.

       Flag --edit specifies that an editor with the  metadata	identified  by
       the  uri	 argument  should be opened and	the contents saved back	after-
       wards.  Otherwise the new contents can be provided via  the  set	 argu-
       ment.

       When setting metadata via --edit	or set the key argument	must be	speci-
       fied and	is used	to prefix the custom elements to bind them to the pri-
       vate namespace.

       If neither of --edit and	set are	specified the XML metadata correspond-
       ing to the uri namespace	is displayed instead of	being modified.

   migrate
       Syntax:

	  migrate [--live] [--offline] [--direct] [--p2p [--tunnelled]]
	     [--persistent] [--undefinesource] [--suspend] [--copy-storage-all]
	     [--copy-storage-inc] [--change-protection]	[--unsafe] [--verbose]
	     [--rdma-pin-all] [--abort-on-error] [--postcopy] [--postcopy-after-precopy]
	     domain desturi [migrateuri] [graphicsuri] [listen-address]	[dname]
	     [--timeout	seconds	[--timeout-suspend | --timeout-postcopy]]
	     [--xml file] [--migrate-disks disk-list] [--disks-port port]
	     [--compressed] [--comp-methods method-list]
	     [--comp-mt-level] [--comp-mt-threads] [--comp-mt-dthreads]
	     [--comp-xbzrle-cache] [--auto-converge] [auto-converge-initial]
	     [auto-converge-increment] [--persistent-xml file] [--tls]
	     [--postcopy-bandwidth bandwidth]
	     [--parallel [--parallel-connections connections]]
	     [--bandwidth bandwidth] [--tls-destination	hostname]
	     [--disks-uri URI]

       Migrate domain to another host.	Add --live for live migration; <--p2p>
       for  peer-2-peer	 migration;  --direct  for direct migration; or	--tun-
       nelled for tunnelled migration.	--offline migrates  domain  definition
       without	starting  the domain on	destination and	without	stopping it on
       source host.  Offline migration may be used with	inactive  domains  and
       it  must	be used	with --persistent option.  --persistent	leaves the do-
       main persistent on destination host, --undefinesource undefines the do-
       main  on	the source host, and --suspend leaves the domain paused	on the
       destination  host.    --copy-storage-all	  indicates   migration	  with
       non-shared  storage  with  full disk copy, --copy-storage-inc indicates
       migration with non-shared storage with incremental copy (same base  im-
       age shared between source and destination).  In both cases the disk im-
       ages have to exist on destination host, the --copy-storage-...  options
       only  tell  libvirt  to transfer	data from the images on	source host to
       the images found	at the same place on the destination host. By  default
       only   non-shared   non-readonly	 images	 are  transferred.  Use	 --mi-
       grate-disks to explicitly specify a list	of disk	 targets  to  transfer
       via  the	 comma	separated  disk-list argument. --change-protection en-
       forces that no incompatible configuration changes will be made  to  the
       domain while the	migration is underway; this flag is implicitly enabled
       when supported by the hypervisor, but can be explicitly used to	reject
       the  migration  if  the	hypervisor  lacks  change  protection support.
       --verbose displays the progress of migration.  --abort-on-error cancels
       the  migration  if  a soft error	(for example I/O error)	happens	during
       the migration. --postcopy enables post-copy  logic  in  migration,  but
       does  not  actually  start  post-copy,  i.e.,  migration	 is started in
       pre-copy	mode.  Once migration is  running,  the	 user  may  switch  to
       post-copy  using	 the  migrate-postcopy command sent from another virsh
       instance	or use --postcopy-after-precopy	along with --postcopy  to  let
       libvirt	automatically  switch  to  post-copy  after  the first pass of
       pre-copy	is  finished.	The  maximum  bandwidth	 consumed  during  the
       post-copy  phase	may be limited using --postcopy-bandwidth. The maximum
       bandwidth consumed during the  pre-copy	phase  may  be	limited	 using
       --bandwidth.

       --auto-converge	forces	convergence during live	migration. The initial
       guest CPU throttling rate can be	set with auto-converge-initial.	If the
       initial	throttling  rate is not	enough to ensure convergence, the rate
       is periodically increased by auto-converge-increment.

       --rdma-pin-all can be used with RDMA migration (i.e.,  when  migrateuri
       starts  with rdma://) to	tell the hypervisor to pin all domain's	memory
       at once before migration	starts rather than letting it pin memory pages
       as  needed. For QEMU/KVM	this requires hard_limit memory	tuning element
       (in the domain XML) to be used and set to the maximum memory configured
       for the domain plus any memory consumed by the QEMU process itself. Be-
       ware of setting the memory limit	too high (and thus allowing the	domain
       to  lock	 most of the host's memory). Doing so may be dangerous to both
       the domain and the host itself since the	host's kernel may run  out  of
       memory.

       Note:  Individual hypervisors usually do	not support all	possible types
       of migration. For example, QEMU does not	support	direct migration.

       In some cases libvirt may refuse	to migrate the domain because doing so
       may  lead  to  potential	problems such as data corruption, and thus the
       migration is considered unsafe. For QEMU	domain,	this may happen	if the
       domain  uses disks without explicitly setting cache mode	to "none". Mi-
       grating such domains is unsafe unless the disk images are stored	on co-
       herent  clustered filesystem, such as GFS2 or GPFS. If you are sure the
       migration is safe or you	just do	not care, use --unsafe	to  force  the
       migration.

       dname  is  used	for  renaming the domain to new	name during migration,
       which also usually can be omitted.  Likewise,  --xml  file  is  usually
       omitted,	 but  can be used to supply an alternative XML file for	use on
       the destination to supply a larger set of changes to any	 host-specific
       portions	 of  the domain	XML, such as accounting	for naming differences
       between source and destination in  accessing  underlying	 storage.   If
       --persistent is enabled,	--persistent-xml file can be used to supply an
       alternative XML file which will be used as the persistent guest defini-
       tion on the destination host.

       --timeout  seconds  tells virsh to run a	specified action when live mi-
       gration exceeds that many seconds.  It can only be  used	 with  --live.
       If  --timeout-suspend  is specified, the	domain will be suspended after
       the timeout and the migration will complete offline; this  is  the  de-
       fault  if  no  --timeout-\``  option  is	specified on the command line.
       When *--timeout-postcopy	is used,  virsh	 will  switch  migration  from
       pre-copy	 to  post-copy	upon timeout; migration	has to be started with
       --postcopy option for this to work.

       --compressed activates compression, the compression  method  is	chosen
       with --comp-methods. Supported methods are "mt" and "xbzrle" and	can be
       used in any combination.	When no	methods	are  specified,	 a  hypervisor
       default	methods	 will  be used.	QEMU defaults to "xbzrle". Compression
       methods can be tuned further. --comp-mt-level sets  compression	level.
       Values are in range from	0 to 9,	where 1	is maximum speed and 9 is max-
       imum compression. --comp-mt-threads and --comp-mt-dthreads set the num-
       ber  of compress	threads	on source and the number of decompress threads
       on target respectively. --comp-xbzrle-cache sets	size of	page cache  in
       bytes.

       Providing  --tls	 causes	 the  migration	to use the host	configured TLS
       setup (see migrate_tls_x509_cert_dir in /etc/libvirt/qemu.conf) in  or-
       der  to	perform	the migration of the domain. Usage requires proper TLS
       setup for both source and target. Normally the TLS certificate from the
       destination  host  must	match  the host's name for TLS verification to
       succeed.	When the certificate does not match the	 destination  hostname
       and the expected	certificate's hostname is known, --tls-destination can
       be used to pass the expected hostname when starting the migration.

       --parallel option will cause migration data to be  sent	over  multiple
       parallel	 connections.  The number of such connections can be set using
       --parallel-connections. Parallel	connections may	help  with  saturating
       the network link	between	the source and the target and thus speeding up
       the migration.

       Running migration can be	canceled by interrupting virsh (usually	 using
       Ctrl-C) or by domjobabort command sent from another virsh instance.

       The desturi and migrateuri parameters can be used to control which des-
       tination	the migration uses.  desturi is	important for  managed	migra-
       tion,  but  unused for direct migration;	migrateuri is required for di-
       rect migration, but can usually be automatically	determined for managed
       migration.

       Note:  The  desturi parameter for normal	migration and peer2peer	migra-
       tion has	different semantics:

       o normal	migration: the desturi is an address of	 the  target  host  as
	 seen from the client machine.

       o peer2peer  migration: the desturi is an address of the	target host as
	 seen from the source machine.

       In a special circumstance where you require a complete control  of  the
       connection  and/or  libvirt  does not have network access to the	remote
       side you	can use	a UNIX transport in the	URI and	specify	a socket  path
       in the query, for example with the qemu driver you could	use this:

	  qemu+unix:///system?socket=/path/to/socket

       When  migrateuri	is not specified, libvirt will automatically determine
       the hypervisor specific URI.  Some hypervisors, including QEMU, have an
       optional	"migration_host" configuration parameter (useful when the host
       has multiple network interfaces).  If this is unspecified, libvirt  de-
       termines	a name by looking up the target	host's configured hostname.

       There are a few scenarios where specifying migrateuri may help:

       o The  configured  hostname  is incorrect, or DNS is broken.  If	a host
	 has a hostname	which will not resolve to match	one of its  public  IP
	 addresses, then libvirt will generate an incorrect URI.  In this case
	 migrateuri should be explicitly specified, using an IP	address, or  a
	 correct hostname.

       o The  host  has	 multiple  network interfaces.	If a host has multiple
	 network interfaces, it	might be  desirable  for  the  migration  data
	 stream	 to  be	 sent over a specific interface	for either security or
	 performance reasons.  In this case migrateuri	should	be  explicitly
	 specified,  using  an	IP  address  associated	with the network to be
	 used.

       o The firewall restricts	what ports are available.  When	libvirt	gener-
	 ates  a  migration  URI,  it will pick	a port number using hypervisor
	 specific rules.  Some hypervisors only	require	a single  port	to  be
	 open  in  the	firewalls,  while others require a whole range of port
	 numbers.  In the latter case migrateuri might be specified to	choose
	 a  specific  port number outside the default range in order to	comply
	 with local firewall policies.

       o The desturi uses UNIX transport method.  In this advanced  case  lib-
	 virt  should  not guess a migrateuri and it should be specified using
	 UNIX socket path URI:

	  unix:///path/to/socket

       See https://libvirt.org/migration.html#uris for more details on	migra-
       tion URIs.

       Optional	graphicsuri overrides connection parameters used for automati-
       cally reconnecting a graphical clients at  the  end  of	migration.  If
       omitted,	 libvirt  will	compute	the parameters based on	target host IP
       address.	In case	the client does	not have a direct access to  the  net-
       work virtualization hosts are connected to and needs to connect through
       a proxy,	graphicsuri may	be used	to  specify  the  address  the	client
       should connect to. The URI is formed as follows:

	  protocol://hostname[:port]/[?parameters]

       where  protocol	is either "spice" or "vnc" and parameters is a list of
       protocol	specific parameters separated by '&'. Currently	recognized pa-
       rameters	are "tlsPort" and "tlsSubject".	For example,

	  spice://target.host.com:1234/?tlsPort=4567

       Optional	 listen-address	sets the listen	address	that hypervisor	on the
       destination side	should bind to for incoming migration. Both  IPv4  and
       IPv6 addresses are accepted as well as hostnames	(the resolving is done
       on destination).	 Some hypervisors do not support specifying the	listen
       address and will	return an error	if this	parameter is used. This	param-
       eter cannot be used if desturi uses UNIX	transport method.

       Optional	disks-port sets	the port that hypervisor on  destination  side
       should  bind  to	 for incoming disks traffic. Currently it is supported
       only by QEMU.

       Optional	disks-uri can  also  be	 specified  (mutually  exclusive  with
       disks-port)  to	specify	what the remote	hypervisor should bind/connect
       to when migrating disks.	 This can be tcp://address:port	to  specify  a
       listen  address (which overrides	--migrate-uri and --listen-address for
       the disk	migration) and a port or unix:///path/to/socket	 in  case  you
       need  the  disk migration to happen over	a UNIX socket with that	speci-
       fied path.  In this case	you need to make sure the same socket path  is
       accessible to both source and destination hypervisors and connecting to
       the socket on the source	(after hypervisor creates it on	 the  destina-
       tion)  will  actually  connect  to  the	destination.  If you are using
       SELinux (at least on the	source host) you need to make sure the	socket
       on  the	source is accessible to	libvirtd/QEMU for connection.  Libvirt
       cannot change the context of the	existing socket	because	it is  differ-
       ent  from the file representation of the	socket and the context is cho-
       sen by its creator (usually by  using  setsockcreatecon{,_raw}()	 func-
       tions).

   migrate-compcache
       Syntax:

	  migrate-compcache domain [--size bytes]

       Sets  and/or gets size of the cache (in bytes) used for compressing re-
       peatedly	transferred memory pages during	live  migration.  When	called
       without	size,  the command just	prints current size of the compression
       cache. When size	is specified, the hypervisor is	asked to  change  com-
       pression	 cache to size bytes and then the current size is printed (the
       result may differ from the requested size due to	rounding done  by  the
       hypervisor). The	size option is supposed	to be used while the domain is
       being live-migrated as a	reaction to migration progress and  increasing
       number of compression cache misses obtained from	domjobinfo.

   migrate-getmaxdowntime
       Syntax:

	  migrate-getmaxdowntime domain

       Get the maximum tolerable downtime for a	domain which is	being live-mi-
       grated to another host.	This is	the number of milliseconds  the	 guest
       is allowed to be	down at	the end	of live	migration.

   migrate-getspeed
       Syntax:

	  migrate-getspeed domain [--postcopy]

       Get  the	 maximum  migration  bandwidth (in MiB/s) for a	domain.	If the
       --postcopy option is specified, the command will	get the	maximum	 band-
       width allowed during a post-copy	migration phase.

   migrate-postcopy
       Syntax:

	  migrate-postcopy domain

       Switch  the  current migration from pre-copy to post-copy. This is only
       supported for a migration started with --postcopy option.

   migrate-setmaxdowntime
       Syntax:

	  migrate-setmaxdowntime domain	downtime

       Set maximum tolerable downtime for a domain  which  is  being  live-mi-
       grated  to  another host.  The downtime is a number of milliseconds the
       guest is	allowed	to be down at the end of live migration.

   migrate-setspeed
       Syntax:

	  migrate-setspeed domain bandwidth [--postcopy]

       Set the maximum migration bandwidth (in MiB/s) for a  domain  which  is
       being migrated to another host. bandwidth is interpreted	as an unsigned
       long long value.	Specifying a negative value results in an  essentially
       unlimited  value	 being	provided to the	hypervisor. The	hypervisor can
       choose whether to reject	the value or convert it	to the	maximum	 value
       allowed.	 If  the  --postcopy option is specified, the command will set
       the maximum bandwidth allowed during a post-copy	migration phase.

   numatune
       Syntax:

	  numatune domain [--mode mode]	[--nodeset nodeset]
	     [[--config] [--live] | [--current]]

       Set or get a domain's numa parameters, corresponding to the  <numatune>
       element	of  domain  XML.  Without flags, the current settings are dis-
       played.

       mode can	be one of `strict', `interleave' and `preferred' or any	 valid
       number  from  the virDomainNumatuneMemMode enum in case the daemon sup-
       ports it.  For a	running	domain,	the mode can't	be  changed,  and  the
       nodeset	can  be	 changed only if the domain was	started	with a mode of
       `strict'.

       nodeset is a list of numa nodes used by the host	for  running  the  do-
       main.   Its  syntax  is a comma separated list, with '-'	for ranges and
       '^' for excluding a node.

       If --live is specified, set scheduler information of a  running	guest.
       If  --config is specified, affect the next start	of a persistent	guest.
       If --current is specified, it is	equivalent to either --live or	--con-
       fig, depending on the current state of the guest.

       For  running  guests  in	 Linux hosts, the changes made in the domain's
       numa parameters does not	imply that the guest memory will be moved to a
       different  nodeset  immediately.	 The  memory  migration	depends	on the
       guest activity, and the memory of an idle guest will remain in its pre-
       vious  nodeset  for longer. The presence	of VFIO	devices	will also lock
       parts of	the guest memory in the	same nodeset used to start the	guest,
       regardless of nodeset changes.

   perf
       Syntax:

	  perf domain [--enable	eventSpec] [--disable eventSpec]
	     [[--config] [--live] | [--current]]

       Get  the	 current  perf	events setting or enable/disable specific perf
       events for a guest domain.

       Perf is a performance analyzing tool in Linux, and  it  can  instrument
       CPU  performance	 counters,  tracepoints, kprobes, and uprobes (dynamic
       tracing). Perf supports a list of measurable events,  and  can  measure
       events coming from different sources. For instance, some	event are pure
       kernel counters,	in this	case they are called software events,  includ-
       ing  context-switches,  minor-faults,  etc..  Now dozens	of events from
       different sources can be	supported by perf.

       Currently only QEMU/KVM supports	this command. The --enable and	--dis-
       able  option  combined  with eventSpec can be used to enable or disable
       specific	performance event. eventSpec is	a string list of one  or  more
       events separated	by commas. Valid event names are as follows:

       Valid perf event	names

       o cmt  -	A PQos (Platform Qos) feature to monitor the usage of cache by
	 applications running on the platform.

       o mbmt -	Provides a way to monitor the total  system  memory  bandwidth
	 between one level of cache and	another.

       o mbml  -  Provides  a  way  to limit the amount	of data	(bytes/s) send
	 through the memory controller on the socket.

       o cache_misses -	Provides the count of  cache  misses  by  applications
	 running on the	platform.

       o cache_references  -  Provides the count of cache hits by applications
	 running on th e platform.

       o instructions -	Provides the count of instructions executed by	appli-
	 cations running on the	platform.

       o cpu_cycles - Provides the count of cpu	cycles (total/elapsed).	May be
	 used with instructions	in order to get	a cycles per instruction.

       o branch_instructions - Provides	the count of branch instructions  exe-
	 cuted by applications running on the platform.

       o branch_misses	-  Provides the	count of branch	misses executed	by ap-
	 plications running on the platform.

       o bus_cycles - Provides the count of bus	cycles	executed  by  applica-
	 tions running on the platform.

       o stalled_cycles_frontend - Provides the	count of stalled cpu cycles in
	 the frontend of the instruction processor  pipeline  by  applications
	 running on the	platform.

       o stalled_cycles_backend	 - Provides the	count of stalled cpu cycles in
	 the backend of	the instruction	 processor  pipeline  by  applications
	 running on the	platform.

       o ref_cpu_cycles	-  Provides the	count of total cpu cycles not affected
	 by CPU	frequency scaling by applications running on the platform.

       o cpu_clock - Provides the cpu clock time consumed by applications run-
	 ning on the platform.

       o task_clock  -	Provides  the task clock time consumed by applications
	 running on the	platform.

       o page_faults - Provides	the count of page faults by applications  run-
	 ning on the platform.

       o context_switches - Provides the count of context switches by applica-
	 tions running on the platform.

       o cpu_migrations	- Provides the count cpu  migrations  by  applications
	 running on the	platform.

       o page_faults_min  -  Provides  the count minor page faults by applica-
	 tions running on the platform.

       o page_faults_maj - Provides the	count major page  faults  by  applica-
	 tions running on the platform.

       o alignment_faults  -  Provides	the count alignment faults by applica-
	 tions running on the platform.

       o emulation_faults - Provides the count emulation  faults  by  applica-
	 tions running on the platform.

       Note:  The statistics can be retrieved using the	domstats command using
       the --perf flag.

       If --live is specified, affect a	running	guest.	If --config is	speci-
       fied,  affect  the  next	 start of a persistent guest.  If --current is
       specified, it is	equivalent to either --live or --config, depending  on
       the  current state of the guest.	 Both --live and --config flags	may be
       given, but --current is exclusive. If no	flag is	specified, behavior is
       different depending on hypervisor.

   reboot
       Syntax:

	  reboot domain	[--mode	MODE-LIST]

       Reboot  a  domain.  This	acts just as if	the domain had the reboot com-
       mand run	from the console.  The command returns as soon as it has  exe-
       cuted  the  reboot action, which	may be significantly before the	domain
       actually	reboots.

       The exact behavior of a domain when it reboots is set by	the  on_reboot
       parameter in the	domain's XML definition.

       By  default the hypervisor will try to pick a suitable shutdown method.
       To specify an alternative method, the --mode parameter  can  specify  a
       comma  separated	 list  which includes acpi, agent, initctl, signal and
       paravirt. The order in which drivers will try each mode	is  undefined,
       and  not	 related  to the order specified to virsh.  For	strict control
       over ordering, use a single mode	at a time and repeat the command.

   reset
       Syntax:

	  reset	domain

       Reset a domain immediately without any guest shutdown.  reset  emulates
       the  power reset	button on a machine, where all guest hardware sees the
       RST line	set and	reinitializes internal state.

       Note: Reset without any guest OS	shutdown risks data loss.

   restore
       Syntax:

	  restore state-file [--bypass-cache] [--xml file]
	     [{--running | --paused}]

       Restores	a domain from a	virsh save state file. See save	for more info.

       If --bypass-cache is specified, the restore will	avoid the file	system
       cache, although this may	slow down the operation.

       --xml file is usually omitted, but can be used to supply	an alternative
       XML file	for use	on  the	 restored  guest  with	changes	 only  in  the
       host-specific  portions of the domain XML.  For example,	it can be used
       to account for file naming differences in  underlying  storage  due  to
       disk snapshots taken after the guest was	saved.

       Normally,  restoring  a	saved image will use the state recorded	in the
       save image to decide between running  or	 paused;  passing  either  the
       --running or --paused flag will allow overriding	which state the	domain
       should be started in.

       Note: To	avoid corrupting file system contents within the  domain,  you
       should  not  reuse the saved state file for a second restore unless you
       have also reverted all storage volumes back to  the  same  contents  as
       when the	state file was created.

   resume
       Syntax:

	  resume domain

       Moves  a	 domain	 out of	the suspended state.  This will	allow a	previ-
       ously suspended domain to now be	eligible for scheduling	by the	under-
       lying hypervisor.

   save
       Syntax:

	  save domain state-file [--bypass-cache] [--xml file]
	     [{--running | --paused}] [--verbose]

       Saves  a	 running  domain  (RAM,	but not	disk state) to a state file so
       that it can be restored later.  Once saved, the domain will  no	longer
       be running on the system, thus the memory allocated for the domain will
       be free for other domains to use.  virsh	 restore  restores  from  this
       state  file.   If  --bypass-cache is specified, the save	will avoid the
       file system cache, although this	may slow down the operation.

       The progress may	be monitored using domjobinfo virsh command  and  can-
       celed  with  domjobabort	 command (sent by another virsh	instance). An-
       other option is to send SIGINT  (usually	 with  Ctrl-C)	to  the	 virsh
       process running save command. --verbose displays	the progress of	save.

       This  is	roughly	equivalent to doing a hibernate	on a running computer,
       with all	the same limitations.  Open network connections	may be severed
       upon restore, as	TCP timeouts may have expired.

       --xml file is usually omitted, but can be used to supply	an alternative
       XML file	for use	on  the	 restored  guest  with	changes	 only  in  the
       host-specific  portions of the domain XML.  For example,	it can be used
       to account for file naming differences that are planned to be made  via
       disk snapshots of underlying storage after the guest is saved.

       Normally, restoring a saved image will decide between running or	paused
       based on	the state the domain was in when the save  was	done;  passing
       either the --running or --paused	flag will allow	overriding which state
       the restore should use.

       Domain saved state files	assume that disk images	will be	unchanged  be-
       tween  the  creation and	restore	point.	For a more complete system re-
       store point, where the disk state is saved alongside the	memory	state,
       see the snapshot	family of commands.

   save-image-define
       Syntax:

	  save-image-define file xml [{--running | --paused}]

       Update  the domain XML that will	be used	when file is later used	in the
       restore command.	 The xml argument must be a file name  containing  the
       alternative XML,	with changes only in the host-specific portions	of the
       domain XML.  For	example, it can	be used	to  account  for  file	naming
       differences  resulting from creating disk snapshots of underlying stor-
       age after the guest was saved.

       The save	image records whether the domain should	be restored to a  run-
       ning  or	 paused	 state.	  Normally,  this  command  does not alter the
       recorded	state; passing either the --running or --paused	flag will  al-
       low overriding which state the restore should use.

   save-image-dumpxml
       Syntax:

	  save-image-dumpxml file [--security-info]

       Extract	the  domain XML	that was in effect at the time the saved state
       file file was created with the  save  command.	Using  --security-info
       will also include security sensitive information.

   save-image-edit
       Syntax:

	  save-image-edit file [{--running | --paused}]

       Edit the	XML configuration associated with a saved state	file file cre-
       ated by the save	command.

       The save	image records whether the domain should	be restored to a  run-
       ning  or	 paused	 state.	  Normally,  this  command  does not alter the
       recorded	state; passing either the --running or --paused	flag will  al-
       low overriding which state the restore should use.

       This is equivalent to:

	  virsh	save-image-dumpxml state-file >	state-file.xml
	  vi state-file.xml (or	make changes with your other text editor)
	  virsh	save-image-define state-file state-file-xml

       except that it does some	error checking.

       The  editor  used can be	supplied by the	$VISUAL	or $EDITOR environment
       variables, and defaults to vi.

   schedinfo
       Syntax:

	  schedinfo domain [[--config] [--live]	| [--current]] [[--set]	parameter=value]...
	  schedinfo [--weight number] [--cap number] domain

       Allows you to show (and set) the	domain scheduler parameters.  The  pa-
       rameters	available for each hypervisor are:

       LXC (posix scheduler) : cpu_shares, vcpu_period,	vcpu_quota

       QEMU/KVM	(posix scheduler): cpu_shares, vcpu_period, vcpu_quota,	emula-
       tor_period, emulator_quota, global_period,  global_quota,  iothread_pe-
       riod, iothread_quota

       Xen (credit scheduler): weight, cap

       ESX (allocation scheduler): reservation,	limit, shares

       If  --live  is specified, set scheduler information of a	running	guest.
       If --config is specified, affect	the next start of a persistent	guest.
       If  --current is	specified, it is equivalent to either --live or	--con-
       fig, depending on the current state of the guest.

       Note: The cpu_shares parameter has a valid value	range of 2-262144.

       Note: The weight	and cap	parameters are defined only for	the XEN_CREDIT
       scheduler.

       Note:  The vcpu_period, emulator_period,	and iothread_period parameters
       have a valid value range	of 1000-1000000	or 0, and the vcpu_quota, emu-
       lator_quota,  and iothread_quota	parameters have	a valid	value range of
       1000-17592186044415 or less than	0. The value 0 for either parameter is
       the same	as not specifying that parameter.

   screenshot
       Syntax:

	  screenshot domain [imagefilepath] [--screen screenID]

       Takes  a	 screenshot  of	 a current domain console and stores it	into a
       file.  Optionally, if the hypervisor supports more displays for	a  do-
       main,  screenID	allows specifying which	screen will be captured. It is
       the sequential number of	screen.	In case	of  multiple  graphics	cards,
       heads  are  enumerated  before devices, e.g. having two graphics	cards,
       both with four heads, screen ID 5 addresses the second head on the sec-
       ond card.

   send-key
       Syntax:

	  send-key domain [--codeset codeset] [--holdtime holdtime] keycode...

       Parse  the keycode sequence as keystrokes to send to domain.  Each key-
       code can	either be a numeric value or a symbolic	name from  the	corre-
       sponding	 codeset.  If --holdtime is given, each	keystroke will be held
       for that	many milliseconds.  The	default	codeset	is linux, but  use  of
       the --codeset option allows other codesets to be	chosen.

       If multiple keycodes are	specified, they	are all	sent simultaneously to
       the guest, and they may be received in random order. If you  need  dis-
       tinct keypresses, you must use multiple send-key	invocations.

       o linux

	 The numeric values are	those defined by the Linux generic input event
	 subsystem. The	symbolic names match the corresponding Linux key  con-
	 stant macro names.

	 See virkeycode-linux(7) and virkeyname-linux(7)

       o xt

	 The numeric values are	those defined by the original XT keyboard con-
	 troller. No symbolic names are	provided

	 See virkeycode-xt(7)

       o atset1

	 The numeric values are	those defined by the AT	 keyboard  controller,
	 set  1	(aka XT	compatible set). Extended keycoes from atset1 may dif-
	 fer from extended keycodes in the xt codeset. No symbolic  names  are
	 provided

	 See virkeycode-atset1(7)

       o atset2

	 The  numeric  values are those	defined	by the AT keyboard controller,
	 set 2.	No symbolic names are provided

	 See virkeycode-atset2(7)

       o atset3

	 The numeric values are	those defined by the AT	 keyboard  controller,
	 set 3 (aka PS/2 compatible set). No symbolic names are	provided

	 See virkeycode-atset3(7)

       o os_x

	 The numeric values are	those defined by the macOS keyboard input sub-
	 system. The symbolic names match the corresponding macOS key constant
	 macro names

	 See virkeycode-osx(7) and virkeyname-osx(7)

       o xt_kbd

	 The  numeric values are those defined by the Linux KBD	device.	 These
	 are a variant on the original XT codeset, but	often  with  different
	 encoding for extended keycodes. No symbolic names are provided.

	 See virkeycode-xtkbd(7)

       o win32

	 The numeric values are	those defined by the Win32 keyboard input sub-
	 system. The symbolic names match the corresponding Win32 key constant
	 macro names

	 See virkeycode-win32(7) and virkeyname-win32(7)

       o usb

	 The numeric values are	those defined by the USB HID specification for
	 keyboard input. No symbolic names are provided

	 See virkeycode-usb(7)

       o qnum

	 The numeric values are	those defined by the QNUM extension for	 send-
	 ing raw keycodes. These are a variant on the XT codeset, but extended
	 keycodes have the low bit of the second byte set, instead of the high
	 bit of	the first byte.	No symbolic names are provided.

	 See virkeycode-qnum(7)

       Examples:

	  # send three strokes 'k', 'e', 'y', using xt codeset.	these
	  # are	all pressed simultaneously and may be received by the guest
	  # in random order
	  virsh	send-key dom --codeset xt 37 18	21

	  # send one stroke 'right-ctrl+C'
	  virsh	send-key dom KEY_RIGHTCTRL KEY_C

	  # send a tab,	held for 1 second
	  virsh	send-key --holdtime 1000 0xf

   send-process-signal
       Syntax:

	  send-process-signal domain-id	pid signame

       Send  a	signal signame to the process identified by pid	running	in the
       virtual domain domain-id. The pid is a process ID in the	virtual	domain
       namespace.

       The  signame  argument may be either an integer signal constant number,
       or one of the symbolic names:

	  "nop", "hup",	"int", "quit", "ill",
	  "trap", "abrt", "bus", "fpe",	"kill",
	  "usr1", "segv", "usr2", "pipe", "alrm",
	  "term", "stkflt", "chld", "cont", "stop",
	  "tstp", "ttin", "ttou", "urg", "xcpu",
	  "xfsz", "vtalrm", "prof", "winch", "poll",
	  "pwr", "sys",	"rt0", "rt1", "rt2", "rt3",
	  "rt4", "rt5",	"rt6", "rt7", "rt8", "rt9",
	  "rt10", "rt11", "rt12", "rt13", "rt14", "rt15",
	  "rt16", "rt17", "rt18", "rt19", "rt20", "rt21",
	  "rt22", "rt23", "rt24", "rt25", "rt26", "rt27",
	  "rt28", "rt29", "rt30", "rt31", "rt32"

       The symbol name may optionally be prefixed with sig or sig_ and may  be
       in uppercase or lowercase.

       Examples:

	  virsh	send-process-signal myguest 1 15
	  virsh	send-process-signal myguest 1 term
	  virsh	send-process-signal myguest 1 sigterm
	  virsh	send-process-signal myguest 1 SIG_HUP

   set-lifecycle-action
       Syntax:

	  set-lifecycle-action domain type action
	     [[--config] [--live] | [--current]]

       Set the lifecycle action	for specified lifecycle	type.  The valid types
       are "poweroff", "reboot"	and "crash", and for each of them valid	action
       is one of "destroy", "restart", "rename-restart", "preserve".  For type
       "crash",	additional actions "coredump-destroy"  and  "coredump-restart"
       are supported.

   set-user-password
       Syntax:

	  set-user-password domain user	password [--encrypted]

       Set the password	for the	user account in	the guest domain.

       If  --encrypted is specified, the password is assumed to	be already en-
       crypted by the method required by the guest OS.

       For QEMU/KVM, this requires the guest agent to be configured  and  run-
       ning.

   set-user-sshkeys
       Syntax:

	  set-user-sshkeys domain user [--file FILE] [{--reset | --remove}]

       Append  keys read from FILE into	user's SSH authorized keys file	in the
       guest domain.  In the FILE keys must be on separate lines and each line
       must follow authorized keys format as defined by	sshd(8).

       If --reset is specified,	then the guest authorized keys file content is
       removed before appending	new keys. As a special	case,  if  --reset  is
       provided	 and  no  FILE was provided then no new	keys are added and the
       authorized keys file is cleared out.

       If --remove is specified, then instead of adding	any new	keys then keys
       read  from  FILE	 are  removed from the authorized keys file. It	is not
       considered an error if the key does not exist in	the file.

   setmaxmem
       Syntax:

	  setmaxmem domain size	[[--config] [--live] | [--current]]

       Change the maximum memory allocation limit  for	a  guest  domain.   If
       --live is specified, affect a running guest.  If	--config is specified,
       affect the next start of	a persistent guest.  If	 --current  is	speci-
       fied,  it  is equivalent	to either --live or --config, depending	on the
       current state of	the guest.  Both --live	 and  --config	flags  may  be
       given, but --current is exclusive. If no	flag is	specified, behavior is
       different depending on hypervisor.

       Some hypervisors	such as	QEMU/KVM don't	support	 live  changes	(espe-
       cially  increasing)  of the maximum memory limit.  Even persistent con-
       figuration changes might	not be performed with some hypervisors/config-
       uration (e.g. on	NUMA enabled domains on	QEMU).	For complex configura-
       tion changes use	command	edit instead).

       size is a scaled	integer	(see NOTES above); it  defaults	 to  kibibytes
       (blocks	of  1024 bytes)	unless you provide a suffix (and the older op-
       tion name --kilobytes is	available as a deprecated synonym) .   Libvirt
       rounds  up  to the nearest kibibyte.  Some hypervisors require a	larger
       granularity than	KiB, and requests that are not an even	multiple  will
       be  rounded  up.	  For  example,	vSphere/ESX rounds the parameter up to
       mebibytes (1024 kibibytes).

   setmem
       Syntax:

	  setmem domain	size [[--config] [--live] | [--current]]

       Change the memory allocation for	a guest	domain.	 If --live  is	speci-
       fied,  perform  a  memory  balloon  of a	running	guest.	If --config is
       specified, affect the next start	of a persistent	guest.	 If  --current
       is  specified, it is equivalent to either --live	or --config, depending
       on the current state of the guest.  Both	--live and --config flags  may
       be given, but --current is exclusive. If	no flag	is specified, behavior
       is different depending on hypervisor.

       size is a scaled	integer	(see NOTES above); it  defaults	 to  kibibytes
       (blocks	of  1024 bytes)	unless you provide a suffix (and the older op-
       tion name --kilobytes is	available as a deprecated synonym) .   Libvirt
       rounds  up  to the nearest kibibyte.  Some hypervisors require a	larger
       granularity than	KiB, and requests that are not an even	multiple  will
       be  rounded  up.	  For  example,	vSphere/ESX rounds the parameter up to
       mebibytes (1024 kibibytes).

       For Xen,	you can	only adjust the	memory of a running domain if the  do-
       main is paravirtualized or running the PV balloon driver.

       For LXC,	the value being	set is the cgroups value for limit_in_bytes or
       the maximum amount of user memory (including file cache). When  viewing
       memory  inside  the  container,	this  is  the /proc/meminfo "MemTotal"
       value. When viewing the value from the host, use	the virsh memtune com-
       mand.  In order to view the current memory in use and the maximum value
       allowed to set memory, use the virsh dominfo command.

   setvcpus
       Syntax:

	  setvcpus domain count	[--maximum] [[--config]	[--live] | [--current]]	[--guest] [--hotpluggable]

       Change the number of virtual CPUs active	in a  guest  domain.   By  de-
       fault,  this command works on active guest domains.  To change the set-
       tings for an inactive guest domain, use the --config flag.

       The count value may be limited by host, hypervisor, or a	 limit	coming
       from  the  original  description	 of the	guest domain. For Xen, you can
       only adjust the virtual CPUs of a running domain	if the domain is  par-
       avirtualized.

       If the --config flag is specified, the change is	made to	the stored XML
       configuration for the guest domain, and will only take effect when  the
       guest domain is next started.

       If --live is specified, the guest domain	must be	active,	and the	change
       takes place immediately.	 Both the --config and	--live	flags  may  be
       specified  together if supported	by the hypervisor.  If this command is
       run before the guest has	 finished  booting,  the  guest	 may  fail  to
       process the change.

       If  --current is	specified, it is equivalent to either --live or	--con-
       fig, depending on the current state of the guest.

       When no flags are given,	the --live flag	is assumed and the  guest  do-
       main  must  be  active.	 In  this situation it is up to	the hypervisor
       whether the --config flag is also assumed, and  therefore  whether  the
       XML configuration is adjusted to	make the change	persistent.

       If  --guest  is	specified,  then  the count of cpus is modified	in the
       guest instead of	the hypervisor.	This flag is usable only for live  do-
       mains and may require guest agent to be configured in the guest.

       To  allow  adding vcpus to persistent definitions that can be later ho-
       tunplugged after	the domain is booted it	is necessary  to  specify  the
       --hotpluggable flag. Vcpus added	to live	domains	supporting vcpu	unplug
       are automatically marked	as hotpluggable.

       The --maximum flag controls the maximum number of virtual cpus that can
       be  hot-plugged	the  next time the domain is booted.  As such, it must
       only be used with the --config flag, and	not with  the  --live  or  the
       --current  flag.	Note that it may not be	possible to change the maximum
       vcpu count if the processor topology is specified for the guest.

   setvcpu
       Syntax:

	  setvcpu domain vcpulist [--enable] | [--disable]
	     [[--live] [--config] | [--current]]

       Change state of individual vCPUs	using hot(un)plug mechanism.

       See vcpupin for information on format of	vcpulist.  Hypervisor  drivers
       may  require that vcpulist contains exactly vCPUs belonging to one hot-
       pluggable entity. This is usually just a	single vCPU but	certain	archi-
       tectures	such as	ppc64 require a	full core to be	specified at once.

       Note  that hypervisors may refuse to disable certain vcpus such as vcpu
       0 or others.

       If --live is specified, affect a	running	domain.	 If --config is	speci-
       fied,  affect  the next startup of a persistent guest.  If --current is
       specified, it is	equivalent to either --live or --config, depending  on
       the  current  state of the guest.  This is the default. Both --live and
       --config	flags may be given, but	--current is exclusive.

   shutdown
       Syntax:

	  shutdown domain [--mode MODE-LIST]

       Gracefully shuts	down a domain.	This coordinates with the domain OS to
       perform	graceful  shutdown, so there is	no guarantee that it will suc-
       ceed, and may take a variable length of time depending on what services
       must be shutdown	in the domain.

       The  exact  behavior  of	 a  domain  when  it  shuts down is set	by the
       on_poweroff parameter in	the domain's XML definition.

       If domain is transient, then the	metadata of any	snapshots  and	check-
       points  will  be	 lost once the guest stops running, but	the underlying
       contents	still exist, and a new domain with the same name and UUID  can
       restore	the snapshot metadata with snapshot-create, and	the checkpoint
       metadata	with checkpoint-create.

       By default the hypervisor will try to pick a suitable shutdown  method.
       To  specify  an	alternative method, the	--mode parameter can specify a
       comma separated list which includes acpi, agent,	 initctl,  signal  and
       paravirt.  The  order in	which drivers will try each mode is undefined,
       and not related to the order specified to virsh.	  For  strict  control
       over ordering, use a single mode	at a time and repeat the command.

   start
       Syntax:

	  start	domain-name-or-uuid [--console]	[--paused]
	     [--autodestroy] [--bypass-cache] [--force-boot]
	     [--pass-fds N,M,...]

       Start a (previously defined) inactive domain, either from the last man-
       agedsave	state, or via a	fresh boot if no managedsave state is present.
       The  domain will	be paused if the --paused option is used and supported
       by the driver; otherwise	it will	 be  running.	If  --console  is  re-
       quested,	attach to the console after creation.  If --autodestroy	is re-
       quested,	then the guest will  be	 automatically	destroyed  when	 virsh
       closes  its  connection	to  libvirt,  or  otherwise  exits.   If --by-
       pass-cache is specified,	and managedsave	state exists, the restore will
       avoid the file system cache, although this may slow down	the operation.
       If --force-boot is specified, then any managedsave state	 is  discarded
       and a fresh boot	occurs.

       If  --pass-fds  is specified, the argument is a comma separated list of
       open file descriptors which should be pass on into the guest. The  file
       descriptors  will be re-numbered	in the guest, starting from 3. This is
       only supported with container based virtualization.

   suspend
       Syntax:

	  suspend domain

       Suspend a running domain. It is kept in memory but won't	 be  scheduled
       anymore.

   ttyconsole
       Syntax:

	  ttyconsole domain

       Output the device used for the TTY console of the domain. If the	infor-
       mation is not available the processes will provide an exit code of 1.

   undefine
       Syntax:

	  undefine domain [--managed-save] [--snapshots-metadata]
	     [--checkpoints-metadata] [--nvram]	[--keep-nvram]
	     [ {--storage volumes | --remove-all-storage
		[--delete-storage-volume-snapshots]} --wipe-storage]

       Undefine	a domain. If the domain	is running,  this  converts  it	 to  a
       transient  domain,  without stopping it.	If the domain is inactive, the
       domain configuration is removed.

       The --managed-save flag guarantees that any managed save	image (see the
       managedsave command) is also cleaned up.	 Without the flag, attempts to
       undefine	a domain with a	managed	save image will	fail.

       The --snapshots-metadata	flag guarantees	that any  snapshots  (see  the
       snapshot-list  command) are also	cleaned	up when	undefining an inactive
       domain.	Without	the flag, attempts to undefine an inactive domain with
       snapshot	metadata will fail.  If	the domain is active, this flag	is ig-
       nored.

       The --checkpoints-metadata flag guarantees that	any  checkpoints  (see
       the checkpoint-list command) are	also cleaned up	when undefining	an in-
       active domain.  Without the flag, attempts to undefine an inactive  do-
       main with checkpoint metadata will fail.	 If the	domain is active, this
       flag is ignored.

       --nvram and --keep-nvram	specify	accordingly to delete  or  keep	 nvram
       (/domain/os/nvram/) file. If the	domain has an nvram file and the flags
       are omitted, the	undefine will fail.

       The --storage flag takes	a parameter volumes, which is  a  comma	 sepa-
       rated list of volume target names or source paths of storage volumes to
       be removed along	with the undefined domain. Volumes  can	 be  undefined
       and  thus removed only on inactive domains. Volume deletion is only at-
       tempted after the domain	is undefined; if not all of the	requested vol-
       umes  could  be deleted,	the error message indicates what still remains
       behind. If a volume path	is not found in	the  domain  definition,  it's
       treated as if the volume	was successfully deleted. Only volumes managed
       by libvirt in storage pools can be removed this way.   (See  domblklist
       for  list  of target names associated to	a domain).  Example: --storage
       vda,/path/to/storage.img

       The --remove-all-storage	flag specifies that all	of the domain's	 stor-
       age volumes should be deleted.

       The  --delete-storage-volume-snapshots  (previously --delete-snapshots)
       flag specifies that any snapshots associated with  the  storage	volume
       should be deleted as well. Requires the --remove-all-storage flag to be
       provided. Not all storage drivers support this option,  presently  only
       rbd.  Using this	when also removing volumes handled by a	storage	driver
       which does not support the flag will result in failure.

       The flag	--wipe-storage specifies that the storage  volumes  should  be
       wiped before removal.

       NOTE:  For  an inactive domain, the domain name or UUID must be used as
       the domain.

   vcpucount
       Syntax:

	  vcpucount domain  [{--maximum	| --active}
	     {--config | --live	| --current}] [--guest]

       Print information about the virtual cpu counts of the given domain.  If
       no flags	are specified, all possible counts are listed in a table; oth-
       erwise, the output is limited to	just the numeric value requested.  For
       historical  reasons,  the  table	 lists the label "current" on the rows
       that can	be queried in isolation	via the	--active flag, rather than re-
       lating to the --current flag.

       --maximum  requests  information	on the maximum cap of vcpus that a do-
       main can	add via	setvcpus, while	 --active  shows  the  current	usage;
       these  two flags	cannot both be specified.  --config requires a persis-
       tent guest and requests information regarding the next time the	domain
       will be booted, --live requires a running domain	and lists current val-
       ues, and	--current queries according to the current state of the	domain
       (corresponding  to  --live  if running, or --config if inactive); these
       three flags are mutually	exclusive.

       If --guest is specified,	then the count of cpus is  reported  from  the
       perspective of the guest. This flag is usable only for live domains and
       may require guest agent to be configured	in the guest.

   vcpuinfo
       Syntax:

	  vcpuinfo domain [--pretty]

       Returns basic information about the domain virtual CPUs,	like the  num-
       ber of vCPUs, the running time, the affinity to physical	processors.

       With --pretty, cpu affinities are shown as ranges.

       Example:

	  $ virsh vcpuinfo fedora
	  VCPU:		  0
	  CPU:		  0
	  State:	  running
	  CPU time:	  7,0s
	  CPU Affinity:	  yyyy

	  VCPU:		  1
	  CPU:		  1
	  State:	  running
	  CPU time:	  0,7s
	  CPU Affinity:	  yyyy

       STATES

       The State field displays	the current operating state of a virtual CPU

       o offline

	 The  virtual CPU is offline and not usable by the domain.  This state
	 is not	supported by all hypervisors.

       o running

	 The virtual CPU is available to the domain and	is operating.

       o blocked

	 The virtual CPU is available to the domain but	is waiting for	a  re-
	 source.   This	 state	is  not	supported by all hypervisors, in which
	 case running may be reported instead.

       o no state

	 The virtual CPU state could not be determined.	This could  happen  if
	 the hypervisor	is newer than virsh.

       o N/A

	 There's  no  information  about the virtual CPU state available. This
	 can be	the case if the	domain is not running or the  hypervisor  does
	 not report the	virtual	CPU state.

   vcpupin
       Syntax:

	  vcpupin domain [vcpu]	[cpulist] [[--live] [--config] | [--current]]

       Query  or change	the pinning of domain VCPUs to host physical CPUs.  To
       pin a single vcpu, specify cpulist; otherwise, you can query  one  vcpu
       or omit vcpu to list all	at once.

       cpulist	is a list of physical CPU numbers. Its syntax is a comma sepa-
       rated list and a	special	markup using '-' and '^' (ex. '0-4', '0-3,^2')
       can  also be allowed. The '-' denotes the range and the '^' denotes ex-
       clusive.	 For pinning the vcpu to all physical cpus specify  'r'	 as  a
       cpulist.	  If --live is specified, affect a running guest.  If --config
       is specified, affect the	next start of a	persistent guest.   If	--cur-
       rent  is	 specified, it is equivalent to	either --live or --config, de-
       pending on the current state of the guest.  Both	 --live	 and  --config
       flags  may  be given if cpulist is present, but --current is exclusive.
       If no flag is specified,	behavior is different depending	on hypervisor.

       Note: The expression is sequentially evaluated, so "0-15,^8" is identi-
       cal to "9-14,0-7,15" but	not identical to "^8,0-15".

   vncdisplay
       Syntax:

	  vncdisplay domain

       Output  the  IP address and port	number for the VNC display. If the in-
       formation is not	available the processes	will provide an	exit  code  of
       1.

DEVICE COMMANDS
       The  following  commands	manipulate devices associated to domains.  The
       domain can be specified as a short integer, a name or a full UUID.   To
       better understand the values allowed as options for the command reading
       the documentation at https://libvirt.org/formatdomain.html on the  for-
       mat  of	the  device  sections to get the most accurate set of accepted
       values.

   attach-device
       Syntax:

	  attach-device	domain FILE [[[--live] [--config] | [--current]] | [--persistent]]

       Attach a	device to the domain, using a device definition	in an XML file
       using  a	device definition element such as <disk> or <interface>	as the
       top-level      element.	     See      the	documentation	    at
       https://libvirt.org/formatdomain.html#elementsDevices  to  learn	 about
       libvirt XML format for a	device.	 If --config is	specified the  command
       alters the persistent guest configuration with the device attach	taking
       effect the next time libvirt starts the domain.	For cdrom  and	floppy
       devices,	 this  command	only replaces the media	within an existing de-
       vice; consider using update-device for  this  usage.   For  passthrough
       host  devices,  see  also nodedev-detach, needed	if the PCI device does
       not use managed mode.

       If --live is specified, affect a	running	domain.	 If --config is	speci-
       fied,  affect  the next startup of a persistent guest.  If --current is
       specified, it is	equivalent to either --live or --config, depending  on
       the  current state of the guest.	 Both --live and --config flags	may be
       given, but --current is exclusive. When no flag is specified legacy API
       is used whose behavior depends on the hypervisor	driver.

       For  compatibility  purposes, --persistent behaves like --config	for an
       offline domain, and like	--live --config	for a running domain.

       Note: using of partial device definition	XML files may  lead  to	 unex-
       pected  results	as some	fields may be autogenerated and	thus match de-
       vices other than	expected.

   attach-disk
       Syntax:

	  attach-disk domain source target [[[--live] [--config] |
	     [--current]] | [--persistent]] [--targetbus bus]
	     [--driver driver] [--subdriver subdriver] [--iothread iothread]
	     [--cache cache] [--io io] [--type type] [--alias alias]
	     [--mode mode] [--sourcetype sourcetype]
	     [--source-protocol	protocol] [--source-host-name hostname:port]
	     [--source-host-transport transport] [--source-host-socket socket]
	     [--serial serial] [--wwn wwn] [--rawio] [--address	address]
	     [--multifunction] [--print-xml]

       Attach a	new disk device	to the domain.	source is path for  the	 files
       and devices unless --source-protocol is specified, in which case	source
       is the name of a	network	disk.  target controls the bus or device under
       which  the  disk	is exposed to the guest	OS. It indicates the "logical"
       device name; the	optional targetbus attribute  specifies	 the  type  of
       disk device to emulate; possible	values are driver specific, with typi-
       cal values being	ide, scsi, virtio, xen,	usb, sata, or sd, if  omitted,
       the bus type is inferred	from the style of the device name (e.g.	 a de-
       vice named 'sda'	will typically be exported using a SCSI	bus).	driver
       can be file, tap	or phy for the Xen hypervisor depending	on the kind of
       access; or qemu for the QEMU emulator.  Further details to  the	driver
       can  be passed using subdriver. For Xen subdriver can be	aio, while for
       QEMU subdriver should match the format of the disk source, such as  raw
       or  qcow2.   Hypervisor default will be used if subdriver is not	speci-
       fied.  However, the default may not be correct, esp. for	 QEMU  as  for
       security	reasons	it is configured not to	detect disk formats.  type can
       indicate	lun, cdrom or floppy as	alternative to the disk	 default,  al-
       though  this  use  only	replaces the media within the existing virtual
       cdrom or	floppy device; consider	using update-device for	this usage in-
       stead.	alias  can  set	user supplied alias.  mode can specify the two
       specific	mode readonly or shareable.  sourcetype	can indicate the  type
       of  source  (block|file|network)	cache can be one of "default", "none",
       "writethrough", "writeback", "directsync"  or  "unsafe".	  io  controls
       specific	 policies  on I/O; QEMU	guests support "threads", "native" and
       "io_uring".  iothread is	the number within  the	range  of  domain  IO-
       Threads	to which this disk may be attached (QEMU only).	 serial	is the
       serial of disk device. wwn is the wwn of	disk device.  rawio  indicates
       the disk	needs rawio capability.	 address is the	address	of disk	device
       in the form of pci:domain.bus.slot.function,  scsi:controller.bus.unit,
       ide:controller.bus.unit,	  usb:bus.port,	  sata:controller.bus.unit  or
       ccw:cssid.ssid.devno. Virtio-ccw	devices	must have their	cssid  set  to
       0xfe.  multifunction indicates specified	pci address is a multifunction
       pci device address.

       There is	also support for using a network disk. As specified, the  user
       can provide a --source-protocol in which	case the source	parameter will
       be interpreted as the source name. --source-protocol must  be  provided
       if  the	user  intends  to  provide a network disk or host information.
       Host information	can be provided	 using	the  tags  --source-host-name,
       --source-host-transport,	 and  --source-host-socket, which respectively
       denote the name of the host,  the  host's  transport  method,  and  the
       socket  that the	host uses. --source-host-socket	and --source-host-name
       cannot	both   be   provided,	and   the   user   must	  provide    a
       --source-host-transport if they want to provide a --source-host-socket.
       The --source-host-name parameter	supports host:port syntax if the  user
       wants to	provide	a port as well.

       If --print-xml is specified, then the XML of the	disk that would	be at-
       tached is printed instead.

       If --live is specified, affect a	running	domain.	 If --config is	speci-
       fied,  affect  the next startup of a persistent guest.  If --current is
       specified, it is	equivalent to either --live or --config, depending  on
       the  current state of the guest.	 Both --live and --config flags	may be
       given, but --current is exclusive. When no flag is specified legacy API
       is used whose behavior depends on the hypervisor	driver.

       For  compatibility  purposes, --persistent behaves like --config	for an
       offline domain, and like	--live --config	for a running  domain.	 Like-
       wise, --shareable is an alias for --mode	shareable.

   attach-interface
       Syntax:

	  attach-interface domain type source [[[--live]
	     [--config]	| [--current]] | [--persistent]]
	     [--target target] [--mac mac] [--script script] [--model model]
	     [--inbound	average,peak,burst,floor] [--outbound average,peak,burst]
	     [--alias alias] [--managed] [--print-xml]

       Attach a	new network interface to the domain.

       type can	be one of the:

       network to indicate connection via a libvirt virtual network,

       bridge to indicate connection via a bridge device on the	host,

       direct to indicate connection directly to one of	the host's network in-
       terfaces	or bridges,

       hostdev to indicate connection using a passthrough of PCI device	on the
       host.

       source  indicates  the source of	the connection.	 The source depends on
       the type	of the interface:

       network name of the virtual network,

       bridge the name of the bridge device,

       direct the name of the host's interface or bridge,

       hostdev the PCI address	of  the	 host's	 interface  formatted  as  do-
       main:bus:slot.function.

       --target	 is  used to specify the tap/macvtap device to be used to con-
       nect the	domain to the source.  Names starting with 'vnet' are  consid-
       ered  as	 auto-generated	 and are blanked out/regenerated each time the
       interface is attached.

       --mac specifies the MAC address of the network interface; if a MAC  ad-
       dress  is not given, a new address will be automatically	generated (and
       stored in the persistent	configuration if "--config" is	given  on  the
       command line).

       --script	 is  used  to  specify	a path to a custom script to be	called
       while attaching to a bridge - this will be called instead  of  the  de-
       fault  script not in addition to	it.  This is valid only	for interfaces
       of bridge type and only for Xen domains.

       --model specifies the network device model to be	presented to  the  do-
       main.

       alias can set user supplied alias.

       --inbound  and  --outbound  control the bandwidth of the	interface.  At
       least one from the average, floor pair must be  specified.   The	 other
       two  peak  and burst are	optional, so "average,peak", "average,,burst",
       "average,,,floor", "average" and	",,,floor" are also legal.  Values for
       average,	 floor	and  peak are expressed	in kilobytes per second, while
       burst is	expressed in kilobytes in a single burst at peak speed as  de-
       scribed	    in	    the	     Network	  XML	  documentation	    at
       https://libvirt.org/formatnetwork.html#elementQoS.

       --managed is usable only	for hostdev type and tells  libvirt  that  the
       interface  should  be  managed,	which  means  detached	and reattached
       from/to the host	by libvirt.

       If --print-xml is specified, then the XML of the	interface  that	 would
       be attached is printed instead.

       If --live is specified, affect a	running	domain.	 If --config is	speci-
       fied, affect the	next startup of	a persistent guest.  If	 --current  is
       specified, affect the current domain state, which can either be live or
       offline.	 Both --live and --config flags	may be given, but --current is
       exclusive.  When	no flag	is specified legacy API	is used	whose behavior
       depends on the hypervisor driver.

       For compatibility purposes, --persistent	behaves	like --config  for  an
       offline domain, and like	--live --config	for a running domain.

       Note:  the  optional target value is the	name of	a device to be created
       as the back-end on the node.  If	not provided a device named "vnetN" or
       "vifN" will be created automatically.

   detach-device
       Syntax:

	  detach-device	domain FILE [[[--live] [--config] |
	     [--current]] | [--persistent]]

       Detach  a  device  from the domain, takes the same kind of XML descrip-
       tions as	command	attach-device.	For passthrough	host devices, see also
       nodedev-reattach, needed	if the device does not use managed mode.

       Note:  The supplied XML description of the device should	be as specific
       as its definition in the	domain XML. The	 set  of  attributes  used  to
       match  the  device are internal to the drivers. Using a partial defini-
       tion, or	attempting to detach a device that is not present in  the  do-
       main XML, but shares some specific attributes with one that is present,
       may lead	to unexpected results.

       Quirk: Device unplug is asynchronous in most cases and  requires	 guest
       cooperation.  This means	that it's up to	the discretion of the guest to
       disallow	or delay the unplug arbitrarily. As the	libvirt	 API  used  in
       this  command was designed as synchronous it returns success after some
       timeout even if the device was not unplugged yet	to allow  further  in-
       teractions  with	 the domain e.g. if the	guest is unresponsive. Callers
       which need to make sure that the	device was unplugged can  use  libvirt
       events  (see  virsh  event)  to be notified when	the device is removed.
       Note that the event may arrive before the command returns.

       If --live is specified, affect a	running	domain.	 If --config is	speci-
       fied,  affect  the next startup of a persistent guest.  If --current is
       specified, it is	equivalent to either --live or --config, depending  on
       the  current state of the guest.	 Both --live and --config flags	may be
       given, but --current is exclusive. When no flag is specified legacy API
       is used whose behavior depends on the hypervisor	driver.

       For  compatibility  purposes, --persistent behaves like --config	for an
       offline domain, and like	--live --config	for a running domain.

       Note that older versions	of virsh used --config as an alias for	--per-
       sistent.

   detach-device-alias
       Syntax:

	  detach-device-alias domain alias [[[--live] [--config] | [--current]]]]

       Detach  a device	with given alias from the domain. This command returns
       successfully after the unplug request was sent to the  hypervisor.  The
       actual  removal	of  the	 device	is notified asynchronously via libvirt
       events (see virsh event).

       If --live is specified, affect a	running	domain.	 If --config is	speci-
       fied,  affect  the next startup of a persistent guest.  If --current is
       specified, it is	equivalent to either --live or --config, depending  on
       the  current state of the guest.	 Both --live and --config flags	may be
       given, but --current is exclusive.

   detach-disk
       Syntax:

	  detach-disk domain target [[[--live] [--config] |
	     [--current]] | [--persistent]] [--print-xml]

       Detach a	disk device from a domain. The target is the  device  as  seen
       from the	domain.

       If --live is specified, affect a	running	domain.	 If --config is	speci-
       fied, affect the	next startup of	a persistent guest.  If	 --current  is
       specified,  it is equivalent to either --live or	--config, depending on
       the current state of the	guest.	Both --live and	--config flags may  be
       given, but --current is exclusive. When no flag is specified legacy API
       is used whose behavior depends on the hypervisor	driver.

       For compatibility purposes, --persistent	behaves	like --config  for  an
       offline domain, and like	--live --config	for a running domain.

       Note  that older	versions of virsh used --config	as an alias for	--per-
       sistent.

       If --print-xml is specified, then the XML which would be	used to	detach
       the disk	is printed instead.

       Please see documentation	for detach-device for known quirks.

   detach-interface
       Syntax:

	  detach-interface domain type [--mac mac]
	     [[[--live]	[--config] | [--current]] | [--persistent]]

       Detach  a  network interface from a domain.  type can be	either network
       to indicate a physical network device or	bridge to indicate a bridge to
       a  device.  It  is recommended to use the mac option to distinguish be-
       tween the interfaces if more than one are present on the	domain.

       If --live is specified, affect a	running	domain.	 If --config is	speci-
       fied,  affect  the next startup of a persistent guest.  If --current is
       specified, it is	equivalent to either --live or --config, depending  on
       the  current state of the guest.	 Both --live and --config flags	may be
       given, but --current is exclusive. When no flag is specified legacy API
       is used whose behavior depends on the hypervisor	driver.

       For  compatibility  purposes, --persistent behaves like --config	for an
       offline domain, and like	--live --config	for a running domain.

       Note that older versions	of virsh used --config as an alias for	--per-
       sistent.

       Please see documentation	for detach-device for known quirks.

   update-device
       Syntax:

	  update-device	domain file [--force] [[[--live]
	     [--config]	| [--current]] | [--persistent]]

       Update the characteristics of a device associated with domain, based on
       the device definition in	an XML file.  The --force option can  be  used
       to  force  device  update,  e.g.,  to  eject  a	CD-ROM	even  if it is
       locked/mounted	in   the   domain.   See    the	   documentation    at
       https://libvirt.org/formatdomain.html#elementsDevices  to  learn	 about
       libvirt XML format for a	device.

       If --live is specified, affect a	running	domain.	 If --config is	speci-
       fied,  affect  the next startup of a persistent guest.  If --current is
       specified, it is	equivalent to either --live or --config, depending  on
       the  current state of the guest.	 Both --live and --config flags	may be
       given, but --current is exclusive. Not specifying any flag is the  same
       as specifying --current.

       For  compatibility  purposes, --persistent behaves like --config	for an
       offline domain, and like	--live --config	for a running domain.

       Note that older versions	of virsh used --config as an alias for	--per-
       sistent.

       Note:  using  of	 partial device	definition XML files may lead to unex-
       pected results as some fields may be autogenerated and thus  match  de-
       vices other than	expected.

   change-media
       Syntax:

	  change-media domain path [--eject] [--insert]
	     [--update]	[source] [--force] [[--live] [--config]	|
	     [--current]] [--print-xml]	[--block]

       Change  media of	CDROM or floppy	drive. path can	be the fully-qualified
       path or the unique target name (<target dev='hdc'>) of the disk device.
       source  specifies  the path of the media	to be inserted or updated. The
       --block flag allows setting the backing type in case a block device  is
       used as media for the CDROM or floppy drive instead of a	file.

       --eject	indicates  the	media will be ejected.	--insert indicates the
       media will be inserted. source must be specified.  If  the  device  has
       source (e.g. <source file='media'>), and	source is not specified, --up-
       date is equal to	--eject. If the	device has no source,  and  source  is
       specified, --update is equal to --insert. If the	device has source, and
       source is specified, --update behaves like combination of  --eject  and
       --insert.   If  none  of	 --eject, --insert, and	--update is specified,
       --update	is used	by default.  The --force option	can be used  to	 force
       media  changing.	  If  --live is	specified, alter live configuration of
       running guest.  If --config is specified, alter	persistent  configura-
       tion,  effect  observed on next startup of the guest.  --current	can be
       either or both of live and config, depends on the  hypervisor's	imple-
       mentation.   Both --live	and --config flags may be given, but --current
       is exclusive. If	no flag	is specified, behavior is different  depending
       on hypervisor.  If --print-xml is specified, the	XML that would be used
       to change media is printed instead of changing the media.

NODEDEV	COMMANDS
       The following commands manipulate host devices that are intended	to  be
       passed  through	to  guest domains via <hostdev>	elements in a domain's
       <devices> section.  A node device key is	generally specified by the bus
       name followed by	its address, using underscores between all components,
       such as	pci_0000_00_02_1,  usb_1_5_3,  or  net_eth1_00_27_13_6a_fe_00.
       The  nodedev-list gives the full	list of	host devices that are known to
       libvirt,	although this includes devices that cannot be  assigned	 to  a
       guest  (for  example, attempting	to detach the PCI device that controls
       the host's hard disk controller where  the  guest's  disk  images  live
       could cause the host system to lock up or reboot).

       For    more    information    on	   node	   device    definition	  see:
       https://libvirt.org/formatnode.html.

       Passthrough devices cannot be simultaneously used by the	host  and  its
       guest domains, nor by multiple active guests at once.  If the <hostdev>
       description of a	PCI device includes the	attribute  managed='yes',  and
       the  hypervisor driver supports it, then	the device is in managed mode,
       and attempts to use that	passthrough device in an active	guest will au-
       tomatically  behave as if nodedev-detach	(guest start, device hot-plug)
       and nodedev-reattach (guest stop, device	hot-unplug) were called	at the
       right  points.	If a PCI device	is not marked as managed, then it must
       manually	be detached before guests can use it, and manually  reattached
       to  be  returned	 to the	host.  Also, if	a device is manually detached,
       then the	host does not regain control of	the device without a  matching
       reattach, even if the guests use	the device in managed mode.

   nodedev-create
       Syntax:

	  nodedev-create FILE

       Create  a  device on the	host node that can then	be assigned to virtual
       machines. Normally, libvirt is able to  automatically  determine	 which
       host  nodes are available for use, but this allows registration of host
       hardware	that libvirt did not automatically detect.  file contains  xml
       for a top-level <device>	description of a node device.

   nodedev-destroy
       Syntax:

	  nodedev-destroy device

       Destroy	(stop)	a device on the	host. device can be either device name
       or wwn pair in "wwnn,wwpn" format  (only	 works	for  vHBA  currently).
       Note  that this makes libvirt quit managing a host device, and may even
       make that device	unusable by the	rest of	the physical host until	a  re-
       boot.

   nodedev-detach
       Syntax:

	  nodedev-detach nodedev [--driver backend_driver]

       Detach  nodedev	from the host, so that it can safely be	used by	guests
       via <hostdev> passthrough.  This	is reversed with nodedev-reattach, and
       is done automatically for managed devices.

       Different  backend  drivers  expect the device to be bound to different
       dummy devices. For example, QEMU's "kvm"	backend	driver	(the  default)
       expects	the  device  to	 be  bound to pci-stub,	but its	"vfio" backend
       driver expects the device to be bound to	vfio-pci. The --driver parame-
       ter can be used to specify the desired backend driver.

   nodedev-dumpxml
       Syntax:

	  nodedev-dumpxml device

       Dump a <device> XML representation for the given	node device, including
       such information	as the device name, which bus  owns  the  device,  the
       vendor  and  product  id,  and any capabilities of the device usable by
       libvirt (such as	whether	device reset is	supported). device can be  ei-
       ther  device  name  or  wwn  pair in "wwnn,wwpn"	format (only works for
       HBA).

   nodedev-list
       Syntax:

	  nodedev-list cap --tree

       List all	of the devices available on the	node that are  known  by  lib-
       virt.   cap  is	used to	filter the list	by capability types, the types
       must be separated by comma, e.g.	--cap pci,scsi.	Valid capability types
       include	'system',  'pci',  'usb_device',  'usb',  'net',  'scsi_host',
       'scsi_target', 'scsi', 'storage', 'fc_host', 'vports',  'scsi_generic',
       'drm',  'mdev',	'mdev_types',  'ccw',  'css',  'ap_card',  'ap_queue',
       'ap_matrix'.  If	--tree is used,	the output is formatted	in a tree rep-
       resenting parents of each node.	cap and	--tree are mutually exclusive.

   nodedev-reattach
       Syntax:

	  nodedev-reattach nodedev

       Declare	that  nodedev  is no longer in use by any guests, and that the
       host can	resume normal use of the device.  This is  done	 automatically
       for  PCI	 devices in managed mode and USB devices, but must be done ex-
       plicitly	to match any explicit nodedev-detach.

   nodedev-reset
       Syntax:

	  nodedev-reset	nodedev

       Trigger a device	reset for nodedev, useful prior	to transferring	a node
       device  between	guest  passthrough or the host.	 Libvirt will often do
       this action implicitly when required, but this command  allows  an  ex-
       plicit reset when needed.

   nodedev-event
       Syntax:

	  nodedev-event	{[nodedev] event [--loop] [--timeout seconds] [--timestamp] | --list}

       Wait  for a class of node device	events to occur, and print appropriate
       details of events as they happen.  The events can  optionally  be  fil-
       tered  by  nodedev.   Using  --list as the only argument	will provide a
       list of possible	event values known by this client, although  the  con-
       nection might not allow registering for all these events.

       By default, this	command	is one-shot, and returns success once an event
       occurs; you can send SIGINT (usually via	Ctrl-C)	to  quit  immediately.
       If  --timeout is	specified, the command gives up	waiting	for events af-
       ter seconds have	elapsed.   With	--loop,	the command prints all	events
       until a timeout or interrupt key.

       When  --timestamp  is  used, a human-readable timestamp will be printed
       before the event.

VIRTUAL	NETWORK	COMMANDS
       The following commands manipulate networks. Libvirt has the  capability
       to define virtual networks which	can then be used by domains and	linked
       to actual network devices. For more  detailed  information  about  this
       feature see the documentation at	https://libvirt.org/formatnetwork.html
       . Many of the commands for virtual networks are	similar	 to  the  ones
       used  for  domains,  but	the way	to name	a virtual network is either by
       its name	or UUID.

   net-autostart
       Syntax:

	  net-autostart	network	[--disable]

       Configure a virtual network to be automatically started at  boot.   The
       --disable option	disable	autostarting.

   net-create
       Syntax:

	  net-create file

       Create a	transient (temporary) virtual network from an XML file and in-
       stantiate   (start)   the   network.    See   the   documentation    at
       https://libvirt.org/formatnetwork.html  to get a	description of the XML
       network format used by libvirt.

   net-define
       Syntax:

	  net-define file

       Define an inactive persistent virtual network  or  modify  an  existing
       persistent one from the XML file.

   net-destroy
       Syntax:

	  net-destroy network

       Destroy	(stop)	a given	transient or persistent	virtual	network	speci-
       fied by its name	or UUID. This takes effect immediately.

   net-dumpxml
       Syntax:

	  net-dumpxml network [--inactive]

       Output the virtual network information as an XML	dump  to  stdout.   If
       --inactive  is specified, then physical functions are not expanded into
       their associated	virtual	functions.

   net-edit
       Syntax:

	  net-edit network

       Edit the	XML configuration file for a network.

       This is equivalent to:

	  virsh	net-dumpxml --inactive network > network.xml
	  vi network.xml (or make changes with your other text editor)
	  virsh	net-define network.xml

       except that it does some	error checking.

       The editor used can be supplied by the $VISUAL or  $EDITOR  environment
       variables, and defaults to vi.

   net-event
       Syntax:

	  net-event {[network] event [--loop] [--timeout seconds] [--timestamp]	| --list}

       Wait  for a class of network events to occur, and print appropriate de-
       tails of	events as they happen.	The events can optionally be  filtered
       by  network.   Using --list as the only argument	will provide a list of
       possible	event values known by this  client,  although  the  connection
       might not allow registering for all these events.

       By default, this	command	is one-shot, and returns success once an event
       occurs; you can send SIGINT (usually via	Ctrl-C)	to  quit  immediately.
       If  --timeout is	specified, the command gives up	waiting	for events af-
       ter seconds have	elapsed.   With	--loop,	the command prints all	events
       until a timeout or interrupt key.

       When  --timestamp  is  used, a human-readable timestamp will be printed
       before the event.

   net-info
       Syntax:

	  net-info network

       Returns basic information about the network object.

   net-list
       Syntax:

	  net-list [--inactive | --all]
	     { [--table] | --name | --uuid }
	     [--persistent] [<--transient>]
	     [--autostart] [<--no-autostart>]

       Returns the list	of active networks, if --all is	 specified  this  will
       also  include defined but inactive networks, if --inactive is specified
       only the	inactive ones will be listed. You may also want	to filter  the
       returned	 networks by --persistent to list the persistent ones, --tran-
       sient to	list the transient ones, --autostart to	list the ones with au-
       tostart	enabled,  and  --no-autostart  to list the ones	with autostart
       disabled.

       If --name is specified, network names are printed instead of the	 table
       formatted  one  per  line.  If --uuid is	specified network's UUID's are
       printed instead of names. Flag --table specifies	that  the  legacy  ta-
       ble-formatted  output should be used. This is the default. All of these
       are mutually exclusive.

       NOTE: When talking to older servers, this command is forced  to	use  a
       series  of  API	calls with an inherent race, where a pool might	not be
       listed or might appear more than	once if	it changed state between calls
       while  the  list	 was  being collected.	Newer servers do not have this
       problem.

   net-name
       Syntax:

	  net-name network-UUID

       Convert a network UUID to network name.

   net-start
       Syntax:

	  net-start network

       Start a (previously defined) inactive network.

   net-undefine
       Syntax:

	  net-undefine network

       Undefine	the configuration for a	persistent network. If the network  is
       active, make it transient.

   net-uuid
       Syntax:

	  net-uuid network-name

       Convert a network name to network UUID.

   net-update
       Syntax:

	  net-update network command section xml
	     [--parent-index index] [[--live] [--config] | [--current]]

       Update  the  given  section of an existing network definition, with the
       changes optionally taking effect	immediately, without  needing  to  de-
       stroy and re-start the network.

       command	is  one	 of  "add-first",  "add-last",	"add"  (a  synonym for
       add-last), "delete", or "modify".

       section	is  one	  of   "bridge",   "domain",   "ip",   "ip-dhcp-host",
       "ip-dhcp-range",	 "forward",  "forward-interface", "forward-pf",	"port-
       group", "dns-host", "dns-txt", or "dns-srv", each section  being	 named
       by  a concatenation of the xml element hierarchy	leading	to the element
       being changed. For example, "ip-dhcp-host" will change a	<host> element
       that is contained inside	a <dhcp> element inside	an <ip>	element	of the
       network.

       xml is either the text of a complete xml	 element  of  the  type	 being
       changed	(e.g.  "<host  mac="00:11:22:33:44:55' ip='1.2.3.4'/>",	or the
       name of a file that contains a complete xml element. Disambiguation  is
       done  by	 looking  at the first character of the	provided text -	if the
       first character is "<", it is xml text, if the first character  is  not
       "<", it is the name of a	file that contains the xml text	to be used.

       The  --parent-index  option  is used to specify which of	several	parent
       elements	the requested element is in (0-based).	For  example,  a  dhcp
       <host>  element	could  be  in any one of multiple <ip> elements	in the
       network;	if a parent-index isn't	provided, the "most appropriate"  <ip>
       element	will  be  selected  (usually  the  only	one that already has a
       <dhcp> element),	but if --parent-index is given,	 that  particular  in-
       stance of <ip> will get the modification.

       If --live is specified, affect a	running	network.  If --config is spec-
       ified, affect the next startup of a persistent network.	 If  --current
       is  specified, it is equivalent to either --live	or --config, depending
       on the current state of the guest.  Both	--live and --config flags  may
       be  given,  but	--current is exclusive.	Not specifying any flag	is the
       same as specifying --current.

   net-dhcp-leases
       Syntax:

	  net-dhcp-leases network [mac]

       Get a list of dhcp leases for all network interfaces connected  to  the
       given  virtual  network or limited output just for one interface	if mac
       is specified.

NETWORK	PORT COMMANDS
       The following commands manipulate network ports.	Libvirt	 virtual  net-
       works  have  ports created when a virtual machine has a virtual network
       interface added.	In general there should	be no need to use any  of  the
       commands	 here, since the hypervisor drivers run	these commands are the
       right point in a	virtual	machine's lifecycle. They can  be  useful  for
       debugging problems and /	or recovering from bugs	/ stale	state.

   net-port-list
       Syntax:

	  net-port-list	{ [--table] | --uuid } network

       List all	network	ports recorded against the network.

       If  --uuid  is specified	network	ports' UUID's are printed instead of a
       table. Flag --table specifies that the  legacy  table-formatted	output
       should  be used.	This is	the default.  All of these are mutually	exclu-
       sive.

   net-port-create
       Syntax:

	  net-port-create network file

       Allocate	a new network port reserving resources based on	the  port  de-
       scription.

   net-port-dumpxml
       Syntax:

	  net-port-dumpxml network port

       Output the network port information as an XML dump to stdout.

   net-port-delete
       Syntax:

	  net-port-delete network port

       Delete record of	the network port and release its resources

INTERFACE COMMANDS
       The  following  commands	manipulate host	interfaces.  Often, these host
       interfaces can then be used by name within domain <interface>  elements
       (such  as  a system-created bridge interface), but there	is no require-
       ment that host interfaces be tied to any	particular guest configuration
       XML at all.

       Many  of	 the commands for host interfaces are similar to the ones used
       for domains, and	the way	to name	an interface is	either by its name  or
       its  MAC	 address.   However, using a MAC address for an	iface argument
       only works when that address is unique (if an interface	and  a	bridge
       share  the  same	 MAC address, which is often the case, then using that
       MAC address results in an error due to ambiguity, and you  must	resort
       to a name instead).

   iface-bridge
       Syntax:

	  iface-bridge interface bridge	[--no-stp] [delay] [--no-start]

       Create  a  bridge  device named bridge, and attach the existing network
       device interface	to the new bridge.  The	new bridge defaults to	start-
       ing  immediately, with STP enabled and a	delay of 0; these settings can
       be altered with --no-stp, --no-start, and an integer number of  seconds
       for  delay.  All	IP address configuration of interface will be moved to
       the new bridge device.

       See also	iface-unbridge for undoing this	operation.

   iface-define
       Syntax:

	  iface-define file

       Define an inactive persistent physical host interface or	modify an  ex-
       isting persistent one from the XML file.

   iface-destroy
       Syntax:

	  iface-destroy	interface

       Destroy	(stop) a given host interface, such as by running "if-down" to
       disable that interface from active use. This takes effect immediately.

   iface-dumpxml
       Syntax:

	  iface-dumpxml	interface [--inactive]

       Output the host interface information as	an XML	dump  to  stdout.   If
       --inactive  is specified, then the output reflects the persistent state
       of the interface	that will be used the next time	it is started.

   iface-edit
       Syntax:

	  iface-edit interface

       Edit the	XML configuration file for a host interface.

       This is equivalent to:

	  virsh	iface-dumpxml iface > iface.xml
	  vi iface.xml (or make	changes	with your other	text editor)
	  virsh	iface-define iface.xml

       except that it does some	error checking.

       The editor used can be supplied by the $VISUAL or  $EDITOR  environment
       variables, and defaults to vi.

   iface-list
       Syntax:

	  iface-list [--inactive | --all]

       Returns the list	of active host interfaces.  If --all is	specified this
       will also include defined but inactive interfaces.   If	--inactive  is
       specified only the inactive ones	will be	listed.

   iface-name
       Syntax:

	  iface-name interface

       Convert	a  host	interface MAC to interface name, if the	MAC address is
       unique among the	host's interfaces.

       interface specifies the interface MAC address.

   iface-mac
       Syntax:

	  iface-mac interface

       Convert a host interface	name to	MAC address.

       interface specifies the interface name.

   iface-start
       Syntax:

	  iface-start interface

       Start a	(previously  defined)  host  interface,	 such  as  by  running
       "if-up".

   iface-unbridge
       Syntax:

	  iface-unbridge bridge	[--no-start]

       Tear down a bridge device named bridge, releasing its underlying	inter-
       face back to normal usage, and moving all IP address configuration from
       the  bridge  device to the underlying device.  The underlying interface
       is restarted unless --no-start is present; this	flag  is  present  for
       symmetry, but generally not recommended.

       See also	iface-bridge for creating a bridge.

   iface-undefine
       Syntax:

	  iface-undefine interface

       Undefine	the configuration for an inactive host interface.

   iface-begin
       Syntax:

	  iface-begin

       Create  a  snapshot of current host interface settings, which can later
       be committed (iface-commit) or restored (iface-rollback).  If  a	 snap-
       shot  already  exists,  then  this command will fail until the previous
       snapshot	has been committed or restored.	 Undefined behavior results if
       any external changes are	made to	host interfaces	outside	of the libvirt
       API between the beginning of a snapshot	and  its  eventual  commit  or
       rollback.

   iface-commit
       Syntax:

	  iface-commit

       Declare	all  changes since the last iface-begin	as working, and	delete
       the rollback point.  If no interface snapshot has already been started,
       then this command will fail.

   iface-rollback
       Syntax:

	  iface-rollback

       Revert  all  host  interface settings back to the state recorded	in the
       last iface-begin.  If no	interface snapshot has already	been  started,
       then  this command will fail.  Rebooting	the host also serves as	an im-
       plicit rollback point.

STORAGE	POOL COMMANDS
       The following commands manipulate storage pools.	Libvirt	has the	 capa-
       bility to manage	various	storage	solutions, including files, raw	parti-
       tions, and domain-specific formats, used	to provide the storage volumes
       visible	as devices within virtual machines. For	more detailed informa-
       tion    about	this	feature,    see	   the	  documentation	    at
       https://libvirt.org/formatstorage.html .	Many of	the commands for pools
       are similar to the ones used for	domains.

   find-storage-pool-sources
       Syntax:

	  find-storage-pool-sources type [srcSpec]

       Returns XML describing all possible available storage pool sources that
       could  be  used	to create or define a storage pool of a	given type. If
       srcSpec is provided, it is a file that contains XML to further restrict
       the query for pools.

       Not  all	 storage  pools	support	discovery in this manner. Furthermore,
       for those that do support discovery, only specific XML elements are re-
       quired in order to return valid data, while other elements and even at-
       tributes	of some	elements are ignored since they	are not	 necessary  to
       find  the  pool	based  on the search criteria. The following lists the
       supported type options and the expected minimal XML  elements  used  to
       perform the search.

       For  a  "netfs" or "gluster" pool, the minimal expected XML required is
       the <host> element with a "name"	attribute describing the IP address or
       hostname	 to be used to find the	pool. The "port" attribute will	be ig-
       nored as	will any other provided	XML elements in	srcSpec.

       For a "logical" pool, the contents of the srcSpec file are ignored, al-
       though if provided the file must	at least exist.

       For  an "iscsi" or "iscsi-direct" pool, the minimal expect XML required
       is the <host> element with a "name" attribute describing	the IP address
       or hostname to be used to find the pool (the iSCSI server address). Op-
       tionally, the "port" attribute may be provided, although	 it  will  de-
       fault to	3260. Optionally, an <initiator> XML element with a "name" at-
       tribute may be provided to further restrict the iSCSI target search  to
       a specific initiator for	multi-iqn iSCSI	storage	pools.

   find-pool-sources-as
       Syntax:

	  find-storage-pool-sources-as type [host] [port] [initiator]

       Rather  than  providing	srcSpec	XML file for find-storage-pool-sources
       use this	command	option in order	to have	virsh generate the  query  XML
       file  using  the	 optional  arguments. The command will return the same
       output XML as find-storage-pool-sources.

       Use host	to describe a specific host to use for networked storage, such
       as netfs, gluster, and iscsi type pools.

       Use  port  to  further restrict which networked port to utilize for the
       connection if required by the specific storage backend, such as iscsi.

       Use initiator to	further	restrict the iscsi type	pool searches to  spe-
       cific target initiators.

   pool-autostart
       Syntax:

	  pool-autostart pool-or-uuid [--disable]

       Configure whether pool should automatically start at boot.

   pool-build
       Syntax:

	  pool-build pool-or-uuid [--overwrite]	[--no-overwrite]

       Build a given pool.

       Options	--overwrite and	--no-overwrite can only	be used	for pool-build
       a filesystem, disk, or logical pool.

       For a file system pool if neither flag is  specified,  then  pool-build
       just  makes the target path directory and no attempt to run mkfs	on the
       target volume device. If	--no-overwrite is specified, it	probes to  de-
       termine	if a filesystem	already	exists on the target device, returning
       an error	if one exists or using mkfs to format  the  target  device  if
       not.   If --overwrite is	specified, mkfs	is always executed and any ex-
       isting data on the target device	is overwritten unconditionally.

       For a disk pool,	if neither of them is specified	or  --no-overwrite  is
       specified,  pool-build will check the target volume device for existing
       filesystems or partitions before	attempting to write a new label	on the
       target  volume device. If the target volume device already has a	label,
       the command will	fail. If --overwrite is	specified, then	no check  will
       be made on the target volume device prior to writing a new label. Writ-
       ing of the label	uses the pool source format type or "dos" if not spec-
       ified.

       For  a  logical pool, if	neither	of them	is specified or	--no-overwrite
       is specified, pool-build	will check the target volume devices  for  ex-
       isting  filesystems  or	partitions before attempting to	initialize and
       format each device for usage by the logical pool. If any	target	volume
       device  already	has  a label, the command will fail. If	--overwrite is
       specified, then no check	will be	made  on  the  target  volume  devices
       prior  to  initializing and formatting each device. Once	all the	target
       volume devices are properly formatted via pvcreate,  the	 volume	 group
       will be created using all the devices.

   pool-create
       Syntax:

	  pool-create file [--build] [[--overwrite] | [--no-overwrite]]

       Create and start	a pool object from the XML file.

       [--build] [[--overwrite]	| [--no-overwrite]] perform a pool-build after
       creation	in order to remove the need for	a follow-up command  to	 build
       the  pool.  The	--overwrite  and  --no-overwrite flags follow the same
       rules as	pool-build. If just --build is provided,  then	pool-build  is
       called with no flags.

   pool-create-as
       Syntax:

	  pool-create-as name type
	     [--source-host hostname] [--source-path path] [--source-dev path]
	     [--source-name name] [--target path] [--source-format format]
	     [--source-initiator initiator-iqn]
	     [--auth-type authtype --auth-username username
	     [--secret-usage usage | --secret-uuid uuid]]
	     [--source-protocol-ver ver]
	     [[--adapter-name name] | [--adapter-wwnn wwnn --adapter-wwpn wwpn]
	     [--adapter-parent parent |
	     --adapter-parent-wwnn parent_wwnn adapter-parent-wwpn parent_wwpn |
	     --adapter-parent-fabric-wwn parent_fabric_wwn]]
	     [--build] [[--overwrite] |	[--no-overwrite]] [--print-xml]

       Create  and  start  a  pool  object  name  from the raw parameters.  If
       --print-xml is specified, then print the	XML of the pool	object without
       creating	 the  pool.   Otherwise, the pool has the specified type. When
       using pool-create-as for	a pool of type "disk", the existing partitions
       found  on the --source-dev path will be used to populate	the disk pool.
       Therefore, it is	suggested to use pool-define-as	 and  pool-build  with
       the --overwrite in order	to properly initialize the disk	pool.

       [--source-host  hostname] provides the source hostname for pools	backed
       by storage from a remote	server (pool types netfs, iscsi,  rbd,	sheep-
       dog, gluster).

       [--source-path  path]  provides	the  source  directory	path for pools
       backed by directories (pool type	dir).

       [--source-dev path] provides the	source path for	pools backed by	physi-
       cal devices (pool types fs, logical, disk, iscsi, zfs).

       [--source-name name] provides the source	name for pools backed by stor-
       age from	a named	element	(pool types logical, rbd, sheepdog, gluster).

       [--target path] is the path for the mapping of the  storage  pool  into
       the host	file system.

       [--source-format	 format]  provides information about the format	of the
       pool (pool types	fs, netfs, disk, logical).

       [--source-initiator initiator-iqn] provides the initiator iqn for iscsi
       connection of the pool (pool type iscsi-direct).

       [--auth-type  authtype --auth-username username [--secret-usage usage |
       --secret-uuid uuid]] provides the elements required to generate authen-
       tication	 credentials for the storage pool. The authtype	is either chap
       for iscsi type pools or ceph for	rbd type pools.	Either the secret  us-
       age or uuid value may be	provided, but not both.

       [--source-protocol-ver  ver]  provides  the NFS protocol	version	number
       used  to	 contact  the  server's	 NFS  service  via  nfs	 mount	option
       'nfsvers=n'. It is expect the ver value is an unsigned integer.

       [--adapter-name	name]  defines	the scsi_hostN adapter name to be used
       for the scsi_host adapter type pool.

       [--adapter-wwnn wwnn --adapter-wwpn  wwpn  [--adapter-parent  parent  |
       --adapter-parent-wwnn  parent_wwnn  adapter-parent-wwpn	parent_wwpn  |
       --adapter-parent-fabric-wwn parent_fabric_wwn]] defines	the  wwnn  and
       wwpn  to	be used	for the	fc_host	adapter	type pool.  Optionally provide
       the parent scsi_hostN node device to be used for	 the  vHBA  either  by
       parent  name,  parent_wwnn  and parent_wwpn, or parent_fabric_wwn.  The
       parent name could change	between	reboots	if  the	 hardware  environment
       changes,	 so  providing the parent_wwnn and parent_wwpn ensure usage of
       the same	physical HBA even if the scsi_hostN node device	changes. Usage
       of the parent_fabric_wwn	allows a bit more flexibility to choose	an HBA
       on the same storage fabric in order to define the pool.

       [--build] [[--overwrite]	| [--no-overwrite]] perform a pool-build after
       creation	 in  order to remove the need for a follow-up command to build
       the pool. The --overwrite and  --no-overwrite  flags  follow  the  same
       rules  as  pool-build.  If just --build is provided, then pool-build is
       called with no flags.

       For  a  "logical"  pool	only  [--name]	needs  to  be  provided.   The
       [--source-name]	if  provided must match	the Volume Group name.	If not
       provided, one will be generated using the  [--name].  If	 provided  the
       [--target]  is  ignored	and  a	target	source	is generated using the
       [--source-name] (or as generated	from the [--name]).

   pool-define
       Syntax:

	  pool-define file

       Define an inactive persistent storage pool or modify an	existing  per-
       sistent one from	the XML	file.

   pool-define-as
       Syntax:

	  pool-define-as name type
	     [--source-host hostname] [--source-path path] [--source-dev path]
	     [*--source-name name*] [*--target path*] [*--source-format	format*]
	     [--source-initiator initiator-iqn]
	     [*--auth-type authtype* *--auth-username username*
	     [*--secret-usage usage* | *--secret-uuid uuid*]]
	     [*--source-protocol-ver ver*]
	     [[*--adapter-name name*] |	[*--adapter-wwnn* *--adapter-wwpn*]
	     [*--adapter-parent	parent*]] [*--print-xml*]

       Create,	but  do	not start, a pool object name from the raw parameters.
       If --print-xml is specified, then print the  XML	 of  the  pool	object
       without defining	the pool.  Otherwise, the pool has the specified type.

       Use  the	 same  arguments  as  pool-create-as,  except for the --build,
       --overwrite, and	--no-overwrite options.

   pool-destroy
       Syntax:

	  pool-destroy pool-or-uuid

       Destroy (stop) a	given pool object. Libvirt will	no longer  manage  the
       storage described by the	pool object, but the raw data contained	in the
       pool is not changed, and	can be later recovered with pool-create.

   pool-delete
       Syntax:

	  pool-delete pool-or-uuid

       Destroy the resources used by a given pool object.  This	 operation  is
       non-recoverable.	  The pool object will still exist after this command,
       ready for the creation of new storage volumes.

   pool-dumpxml
       Syntax:

	  pool-dumpxml [--inactive] pool-or-uuid

       Returns the XML information about the pool  object.   --inactive	 tells
       virsh to	dump pool configuration	that will be used on next start	of the
       pool as opposed to the current pool configuration.

   pool-edit
       Syntax:

	  pool-edit pool-or-uuid

       Edit the	XML configuration file for a storage pool.

       This is equivalent to:

	  virsh	pool-dumpxml pool > pool.xml
	  vi pool.xml (or make changes with your other text editor)
	  virsh	pool-define pool.xml

       except that it does some	error checking.

       The editor used can be supplied by the $VISUAL or  $EDITOR  environment
       variables, and defaults to vi.

   pool-info
       Syntax:

	  pool-info [--bytes] pool-or-uuid

       Returns	basic  information about the pool object. If --bytes is	speci-
       fied the	sizes of basic info are	not converted to human friendly	units.

   pool-list
       Syntax:

	  pool-list [--inactive] [--all]
	     [--persistent] [--transient]
	     [--autostart] [--no-autostart]
	     [[--details] [--uuid]
	     [--name] [<type>]

       List pool objects known to libvirt.  By default,	only active pools  are
       listed;	--inactive  lists just the inactive pools, and --all lists all
       pools.

       In addition, there are several sets of filtering	flags. --persistent is
       to  list	 the  persistent  pools,  --transient is to list the transient
       pools.  --autostart lists the autostarting pools, --no-autostart	 lists
       the  pools  with	 autostarting  disabled.  If  --uuid is	specified only
       pool's UUIDs are	printed.  If --name is specified only pool's names are
       printed.	If both	--name and --uuid are specified, pool's	UUID and names
       are printed side	by side	without	any header. Option --details is	 mutu-
       ally exclusive with options --uuid and --name.

       You  may	 also  want to list pools with specified types using type, the
       pool types must be separated by comma, e.g. --type dir,disk. The	 valid
       pool  types  include  'dir', 'fs', 'netfs', 'logical', 'disk', 'iscsi',
       'scsi', 'mpath',	'rbd', 'sheepdog', 'gluster',  'zfs',  'vstorage'  and
       'iscsi-direct'.

       The  --details option instructs virsh to	additionally display pool per-
       sistence	and capacity related information where available.

       NOTE: When talking to older servers, this command is forced  to	use  a
       series  of  API	calls with an inherent race, where a pool might	not be
       listed or might appear more than	once if	it changed state between calls
       while  the  list	 was  being collected.	Newer servers do not have this
       problem.

   pool-name
       Syntax:

	  pool-name uuid

       Convert the uuid	to a pool name.

   pool-refresh
       Syntax:

	  pool-refresh pool-or-uuid

       Refresh the list	of volumes contained in	pool.

   pool-start
       Syntax:

	  pool-start pool-or-uuid [--build] [[--overwrite] | [--no-overwrite]]

       Start the storage pool, which is	previously defined but inactive.

       [--build] [[--overwrite]	| [--no-overwrite]] perform a pool-build prior
       to  pool-start  to  ensure the pool environment is in an	expected state
       rather than needing to run the build  command  prior  to	 startup.  The
       --overwrite   and   --no-overwrite  flags  follow  the  same  rules  as
       pool-build. If just --build is provided,	then pool-build	is called with
       no flags.

       Note: A storage pool that relies	on remote resources such as an "iscsi"
       or a (v)HBA backed "scsi" pool may need to be refreshed multiple	 times
       in  order to have all the volumes detected (see pool-refresh).  This is
       because the corresponding volume	devices	may  not  be  present  in  the
       host's  filesystem  during  the initial pool startup or the current re-
       fresh attempt. The number of refresh retries is dependent upon the net-
       work connection and the time the	host takes to export the corresponding
       devices.

   pool-undefine
       Syntax:

	  pool-undefine	pool-or-uuid

       Undefine	the configuration for an inactive pool.

   pool-uuid
       Syntax:

	  pool-uuid pool

       Returns the UUID	of the named pool.

   pool-event
       Syntax:

	  pool-event {[pool] event [--loop] [--timeout seconds]	[--timestamp] |	--list}

       Wait for	a class	of storage pool	events to occur, and print appropriate
       details	of  events  as they happen.  The events	can optionally be fil-
       tered by	pool.  Using --list as the only	argument will provide  a  list
       of  possible event values known by this client, although	the connection
       might not allow registering for all these events.

       By default, this	command	is one-shot, and returns success once an event
       occurs;	you  can send SIGINT (usually via Ctrl-C) to quit immediately.
       If --timeout is specified, the command gives up waiting for events  af-
       ter  seconds have elapsed.   With --loop, the command prints all	events
       until a timeout or interrupt key.

       When --timestamp	is used, a human-readable timestamp  will  be  printed
       before the event.

VOLUME COMMANDS
   vol-create
       Syntax:

	  vol-create pool-or-uuid FILE [--prealloc-metadata]

       Create a	volume from an XML <file>.

       pool-or-uuid is the name	or UUID	of the storage pool to create the vol-
       ume in.

       FILE is the XML <file> with the volume definition. An easy way to  cre-
       ate the XML <file> is to	use the	vol-dumpxml command to obtain the def-
       inition of a pre-existing volume.

       [--prealloc-metadata] preallocate  metadata  (for  qcow2	 images	 which
       don't support full allocation). This option creates a sparse image file
       with metadata, resulting	in higher performance compared to images  with
       no preallocation	and only slightly higher initial disk space usage.

       Example:

	  virsh	vol-dumpxml --pool storagepool1	appvolume1 > newvolume.xml
	  vi newvolume.xml (or make changes with your other text editor)
	  virsh	vol-create differentstoragepool	newvolume.xml

   vol-create-from
       Syntax:

	  vol-create-from pool-or-uuid FILE vol-name-or-key-or-path
	     [--inputpool pool-or-uuid]	 [--prealloc-metadata] [--reflink]

       Create a	volume,	using another volume as	input.

       pool-or-uuid is the name	or UUID	of the storage pool to create the vol-
       ume in.

       FILE is the XML <file> with the volume definition.

       vol-name-or-key-or-path is the name or key or path of the  source  vol-
       ume.

       --inputpool  pool-or-uuid  is  the name or uuid of the storage pool the
       source volume is	in.

       [--prealloc-metadata] preallocate  metadata  (for  qcow2	 images	 which
       don't support full allocation). This option creates a sparse image file
       with metadata, resulting	in higher performance compared to images  with
       no preallocation	and only slightly higher initial disk space usage.

       When  --reflink is specified, perform a COW lightweight copy, where the
       data blocks are copied only when	modified.  If this  is	not  possible,
       the copy	fails.

   vol-create-as
       Syntax:

	  vol-create-as	pool-or-uuid name capacity [--allocation size] [--format string]
	     [--backing-vol vol-name-or-key-or-path]
	     [--backing-vol-format string] [--prealloc-metadata] [--print-xml]

       Create  a  volume  from a set of	arguments unless --print-xml is	speci-
       fied, in	which case just	the XML	of the volume object  is  printed  out
       without any actual object creation.

       pool-or-uuid is the name	or UUID	of the storage pool to create the vol-
       ume in.

       name is the name	of the new volume. For a disk pool,  this  must	 match
       the partition name as determined	from the pool's	source device path and
       the next	available partition. For example,  a  source  device  path  of
       /dev/sdb	and there are no partitions on the disk, then the name must be
       sdb1 with the next name being sdb2 and so on.

       capacity	is the size of the volume to be	created, as a  scaled  integer
       (see NOTES above), defaulting to	bytes if there is no suffix.

       --allocation  size  is  the initial size	to be allocated	in the volume,
       also as a scaled	integer	defaulting to bytes.

       --format	string is used in file based storage pools to specify the vol-
       ume  file  format  to  use; raw,	bochs, qcow, qcow2, vmdk, qed. Use ex-
       tended for disk storage pools in	order to create	an extended  partition
       (other  values  are validity checked but	not preserved when libvirtd is
       restarted or the	pool is	refreshed).

       --backing-vol vol-name-or-key-or-path is	the source backing  volume  to
       be used if taking a snapshot of an existing volume.

       --backing-vol-format  string is the format of the snapshot backing vol-
       ume; raw, bochs,	qcow, qcow2, qed, vmdk,	host_device. These  are,  how-
       ever, meant for file based storage pools.

       [--prealloc-metadata]  preallocate  metadata  (for  qcow2  images which
       don't support full allocation). This option creates a sparse image file
       with  metadata, resulting in higher performance compared	to images with
       no preallocation	and only slightly higher initial disk space usage.

   vol-clone
       Syntax:

	  vol-clone vol-name-or-key-or-path name
	     [--pool pool-or-uuid] [--prealloc-metadata] [--reflink]

       Clone an	existing volume	within the parent pool.	  Less	powerful,  but
       easier to type, version of vol-create-from.

       vol-name-or-key-or-path	is  the	name or	key or path of the source vol-
       ume.

       name is the name	of the new volume.

       --pool pool-or-uuid is the name or UUID of the storage pool  that  con-
       tains the source	volume and will	contain	the new	volume.	 If the	source
       volume name is provided instead of the key or path, then	providing  the
       pool is necessary to find the volume to be cloned; otherwise, the first
       volume found by the key or path will be used.

       [--prealloc-metadata] preallocate  metadata  (for  qcow2	 images	 which
       don't support full allocation). This option creates a sparse image file
       with metadata, resulting	in higher performance compared to images  with
       no preallocation	and only slightly higher initial disk space usage.

       When  --reflink is specified, perform a COW lightweight copy, where the
       data blocks are copied only when	modified.  If this  is	not  possible,
       the copy	fails.

   vol-delete
       Syntax:

	  vol-delete vol-name-or-key-or-path [--pool pool-or-uuid] [--delete-snapshots]

       Delete a	given volume.

       vol-name-or-key-or-path is the volume name or key or path of the	volume
       to delete.

       [--pool pool-or-uuid] is	the name or UUID of the	storage	pool the  vol-
       ume  is	in. If the volume name is provided instead of the key or path,
       then providing the pool is necessary to find the	volume to be  deleted;
       otherwise, the first volume found by the	key or path will be used.

       The  --delete-snapshots	flag  specifies	 that any snapshots associated
       with the	storage	volume should be deleted  as  well.  Not  all  storage
       drivers support this option, presently only rbd.

   vol-upload
       Syntax:

	  vol-upload vol-name-or-key-or-path local-file
	     [--pool pool-or-uuid] [--offset bytes]
	     [--length bytes] [--sparse]

       Upload the contents of local-file to a storage volume.

       vol-name-or-key-or-path	is the name or key or path of the volume where
       the local-file will be uploaded.

       --pool pool-or-uuid is the name or UUID of the storage pool the	volume
       is  in. If the volume name is provided instead of the key or path, then
       providing the pool is necessary to find the volume to be	uploaded into;
       otherwise, the first volume found by the	key or path will be used.

       --offset	 is the	position in the	storage	volume at which	to start writ-
       ing the data. The value must be 0 or larger.

       --length	is an upper bound of the amount	of data	 to  be	 uploaded.   A
       negative	 value is interpreted as an unsigned long long value to	essen-
       tially include everything from the offset to the	end of the volume.

       If --sparse is specified, this command will preserve volume sparseness.

       An error	will occur if the local-file is	 greater  than	the  specified
       length.

       See the description for the libvirt virStorageVolUpload API for details
       regarding possible target volume	and pool changes as a  result  of  the
       pool refresh when the upload is attempted.

   vol-download
       Syntax:

	  vol-download vol-name-or-key-or-path local-file
	     [--pool pool-or-uuid] [--offset bytes] [--length bytes]
	     [--sparse]

       Download	the contents of	a storage volume to local-file.

       vol-name-or-key-or-path	is  the	 name  or key or path of the volume to
       download	into local-file.

       --pool pool-or-uuid is the name or UUID of the storage pool the	volume
       is  in. If the volume name is provided instead of the key or path, then
       providing the pool is necessary to find the volume to be	uploaded into;
       otherwise, the first volume found by the	key or path will be used.

       --offset	 is the	position in the	storage	volume at which	to start read-
       ing the data. The value must be 0 or larger.

       --length	is an upper bound of the amount	of data	to be  downloaded.   A
       negative	 value is interpreted as an unsigned long long value to	essen-
       tially include everything from the offset to the	end of the volume.

       If --sparse is specified, this command will preserve volume sparseness.

   vol-wipe
       Syntax:

	  vol-wipe vol-name-or-key-or-path [--pool pool-or-uuid] [--algorithm algorithm]

       Wipe a volume, ensure data previously on	the volume is  not  accessible
       to future reads.

       vol-name-or-key-or-path	is  the	 name  or key or path of the volume to
       wipe.  It is possible to	choose different wiping	algorithms instead  of
       re-writing volume with zeroes.

       --pool  pool-or-uuid is the name	or UUID	of the storage pool the	volume
       is in. If the volume name is provided instead of	the key	or path,  then
       providing  the pool is necessary	to find	the volume to be wiped;	other-
       wise, the first volume found by the key or path will be used.

       Use the --algorithm switch choosing from	the list of the	following  al-
       gorithms	in order to define which algorithm to use for the wipe.

       Supported algorithms

       o zero	    - 1-pass all zeroes

       o nnsa	     -	4-pass NNSA Policy Letter NAP-14.1-C (XVI-8) for sani-
	 tizing	removable and non-removable hard disks:	random x2, 0x00,  ver-
	 ify.

       o dod	     -	4-pass DoD 5220.22-M section 8-306 procedure for sani-
	 tizing	removable and non-removable rigid disks: random,  0x00,	 0xff,
	 verify.

       o bsi	     - 9-pass method recommended by the	German Center of Secu-
	 rity in  Information  Technologies  (https://www.bsi.bund.de):	 0xff,
	 0xfe, 0xfd, 0xfb, 0xf7, 0xef, 0xdf, 0xbf, 0x7f.

       o gutmann     -	The  canonical 35-pass sequence	described in Gutmann's
	 paper.

       o schneier   - 7-pass method described by Bruce	Schneier  in  "Applied
	 Cryptography" (1996): 0x00, 0xff, random x5.

       o pfitzner7  - Roy Pfitzner's 7-random-pass method: random x7.

       o pfitzner33 - Roy Pfitzner's 33-random-pass method: random x33.

       o random	    - 1-pass pattern: random.

       o trim	    - 1-pass trimming the volume using TRIM or DISCARD

       Note: The scrub binary will be used to handle the 'nnsa', 'dod',	'bsi',
       'gutmann', 'schneier', 'pfitzner7' and  'pfitzner33'  algorithms.   The
       availability  of	 the  algorithms  may be limited by the	version	of the
       scrub binary installed on the host. The 'zero' algorithm	will write ze-
       roes to the entire volume. For some volumes, such as sparse or rbd vol-
       umes, this may result in	completely filling the volume with zeroes mak-
       ing  it appear to be completely full. As	an alternative,	the 'trim' al-
       gorithm does not	overwrite all the data in a volume, rather it  expects
       the  storage  driver to be able to discard all bytes in a volume. It is
       up to the storage driver	to handle how the discarding occurs.  Not  all
       storage drivers or volume types can support 'trim'.

   vol-dumpxml
       Syntax:

	  vol-dumpxml vol-name-or-key-or-path [--pool pool-or-uuid]

       Output the volume information as	an XML dump to stdout.

       vol-name-or-key-or-path	is  the	 name  or key or path of the volume to
       output the XML.

       --pool pool-or-uuid is the name or UUID of the storage pool the	volume
       is  in. If the volume name is provided instead of the key or path, then
       providing the pool is necessary to find the volume to be	uploaded into;
       otherwise, the first volume found by the	key or path will be used.

   vol-info
       Syntax:

	  vol-info vol-name-or-key-or-path [--pool pool-or-uuid] [--bytes] [--physical]

       Returns basic information about the given storage volume.

       vol-name-or-key-or-path is the name or key or path of the volume	to re-
       turn information	for.

       --pool pool-or-uuid is the name or UUID of the storage pool the	volume
       is  in. If the volume name is provided instead of the key or path, then
       providing the pool is necessary to find the volume to be	uploaded into;
       otherwise, the first volume found by the	key or path will be used.

       If  --bytes  is specified the sizes are not converted to	human friendly
       units.

       If --physical is	specified, then	the host physical size is returned and
       displayed  instead of the allocation value. The physical	value for some
       file types, such	as qcow2 may have a different (larger) physical	 value
       than  is	shown for allocation. Additionally sparse files	will have dif-
       ferent physical and allocation values.

   vol-list
       Syntax:

	  vol-list [--pool pool-or-uuid] [--details]

       Return the list of volumes in the given storage pool.

       --pool pool-or-uuid is the name or UUID of the storage pool.

       The --details option instructs virsh  to	 additionally  display	volume
       type and	capacity related information where available.

   vol-pool
       Syntax:

	  vol-pool vol-key-or-path [--uuid]

       Return  the  pool name or UUID for a given volume. By default, the pool
       name is returned.

       vol-key-or-path is the key or path of the volume	to return the pool in-
       formation.

       If the --uuid option is given, the pool UUID is returned	instead.

   vol-path
       Syntax:

	  vol-path vol-name-or-key [--pool pool-or-uuid]

       Return the path for a given volume.

       vol-name-or-key is the name or key of the volume	to return the path.

       --pool  pool-or-uuid is the name	or UUID	of the storage pool the	volume
       is in. If the volume name is provided instead of	the key, then  provid-
       ing  the	pool is	necessary to find the volume to	be uploaded into; oth-
       erwise, the first volume	found by the key will be used.

   vol-name
       Syntax:

	  vol-name vol-key-or-path

       Return the name for a given volume.

       vol-key-or-path is the key or path of the volume	to return the name.

   vol-key
       Syntax:

	  vol-key vol-name-or-path [--pool pool-or-uuid]

       Return the volume key for a given volume.

       vol-name-or-path	is the name or path of the volume to return the	volume
       key.

       --pool  pool-or-uuid is the name	or UUID	of the storage pool the	volume
       is in. If the volume name is provided instead of	the path, then provid-
       ing  the	pool is	necessary to find the volume to	be uploaded into; oth-
       erwise, the first volume	found by the path will be used.

   vol-resize
       Syntax:

	  vol-resize vol-name-or-path capacity [--pool pool-or-uuid] [--allocate] [--delta] [--shrink]

       Resize the capacity of the given	volume,	in bytes.

       vol-name-or-key-or-path is the name or key or path of the volume	to re-
       size.

       capacity	 is  a	scaled integer (see NOTES above) for the volume, which
       defaults	to bytes if there is no	suffix.

       --pool pool-or-uuid is the name or UUID of the storage pool the	volume
       is  in. If the volume name is provided instead of the key or path, then
       providing the pool is necessary to find the volume to be	uploaded into;
       otherwise, the first volume found by the	key or path will be used.

       The new capacity	might be sparse	unless --allocate is specified.

       Normally,  capacity is the new size, but	if --delta is present, then it
       is added	to the existing	size.

       Attempts	to shrink the volume will fail	unless	--shrink  is  present.
       The capacity cannot be negative unless --shrink is provided, but	a neg-
       ative sign is not necessary.

       This command is only safe for storage volumes not in use	by  an	active
       guest; see also blockresize for live resizing.

SECRET COMMANDS
       The   following	 commands   manipulate	 "secrets"   (e.g.  passwords,
       passphrases and encryption keys).  Libvirt can store  secrets  indepen-
       dently  from their use, and other objects (e.g. volumes or domains) can
       refer to	the secrets for	encryption or possibly	other  uses.   Secrets
       are identified using a UUID.  See https://libvirt.org/formatsecret.html
       for documentation of the	XML format used	to represent properties	of se-
       crets.

   secret-define
       Syntax:

	  secret-define	file

       Create  a secret	with the properties specified in file, with no associ-
       ated secret value.  If file does	not specify a UUID, choose  one	 auto-
       matically.  If file specifies a UUID of an existing secret, replace its
       properties by properties	defined	in file, without affecting the	secret
       value.

   secret-dumpxml
       Syntax:

	  secret-dumpxml secret

       Output  properties  of secret (specified	by its UUID) as	an XML dump to
       stdout.

   secret-event
       Syntax:

	  secret-event {[secret] event [--loop]	[--timeout seconds] [--timestamp] | --list}

       Wait for	a class	of secret events to occur, and print  appropriate  de-
       tails  of events	as they	happen.	 The events can	optionally be filtered
       by secret.  Using --list	as the only argument will provide  a  list  of
       possible	 event	values	known  by this client, although	the connection
       might not allow registering for all these events.

       By default, this	command	is one-shot, and returns success once an event
       occurs;	you  can send SIGINT (usually via Ctrl-C) to quit immediately.
       If --timeout is specified, the command gives up waiting for events  af-
       ter  seconds have elapsed.   With --loop, the command prints all	events
       until a timeout or interrupt key.

       When --timestamp	is used, a human-readable timestamp  will  be  printed
       before the event.

   secret-set-value
       Syntax:

	  secret-set-value secret (--file filename [--plain] | --interactive | base64)

       Set  the	 value	associated  with secret	(specified by its UUID)	to the
       value Base64-encoded value base64 or Base-64-encoded contents  of  file
       named  filename.	 Using the --plain flag	is together with --file	allows
       one to use the file contents directly as	the secret value.

       If --interactive	flag is	used the secret	value is read  as  a  password
       from the	terminal.

       Note  that --file, --interactive	and base64 options are mutually	exclu-
       sive.

       Passing secrets via the base64 option on	command	line is	 INSECURE  and
       deprecated. Use the --file option instead.

   secret-get-value
       Syntax:

	  secret-get-value [--plain] secret

       Output the value	associated with	secret (specified by its UUID) to std-
       out, encoded using Base64.

       If the --plain flag is used the value is	not base64 encoded, but	rather
       printed raw. Note that unless virsh is started in quiet mode (virsh -q)
       it prints a newline at the end of the command. This newline is not part
       of the secret.

   secret-undefine
       Syntax:

	  secret-undefine secret

       Delete  a  secret  (specified  by  its  UUID), including	the associated
       value, if any.

   secret-list
       Syntax:

	  secret-list [--ephemeral] [--no-ephemeral]
	     [--private] [--no-private]

       Returns the list	of secrets. You	may also want to filter	 the  returned
       secrets	by  --ephemeral	 to list the ephemeral ones, --no-ephemeral to
       list the	non-ephemeral ones, --private to list the  private  ones,  and
       --no-private to list the	non-private ones.

SNAPSHOT COMMANDS
       The following commands manipulate domain	snapshots.  Snapshots take the
       disk, memory, and device	state of a domain at a point-of-time, and save
       it  for future use.  They have many uses, from saving a "clean" copy of
       an OS image to saving a domain's	state before a potentially destructive
       operation.    Snapshots	 are  identified  with	a  unique  name.   See
       https://libvirt.org/formatsnapshot.html for documentation  of  the  XML
       format used to represent	properties of snapshots.

   snapshot-create
       Syntax:

	  snapshot-create domain [xmlfile] {[--redefine	[--current]] |
	     [--no-metadata] [--halt] [--disk-only] [--reuse-external]
	     [--quiesce] [--atomic] [--live]} [--validate]

       Create  a  snapshot  for	domain domain with the properties specified in
       xmlfile.	  Optionally, the --validate option can	be passed to  validate
       the  format of the input	XML file against an internal RNG schema	(iden-
       tical to	using the virt-xml-validate(1) tool). Normally,	the only prop-
       erties  settable	for a domain snapshot are the <name> and <description>
       elements, as well as <disks> if --disk-only is given; the rest  of  the
       fields are ignored, and automatically filled in by libvirt.  If xmlfile
       is completely omitted, then libvirt will	choose a value for all fields.
       The new snapshot	will become current, as	listed by snapshot-current.

       If  --halt  is  specified, the domain will be left in an	inactive state
       after the snapshot is created.

       If --disk-only is specified, the	snapshot will only include  disk  con-
       tent  rather  than  the usual full system snapshot with vm state.  Disk
       snapshots are captured faster than full system snapshots, but reverting
       to  a  disk  snapshot  may require fsck or journal replays, since it is
       like the	disk state at the  point  when	the  power  cord  is  abruptly
       pulled;	and  mixing --halt and --disk-only loses any data that was not
       flushed to disk at the time.

       If --redefine is	specified, then	all XML	 elements  produced  by	 snap-
       shot-dumpxml  are valid;	this can be used to migrate snapshot hierarchy
       from one	machine	to another, to recreate	hierarchy for the  case	 of  a
       transient  domain  that	goes away and is later recreated with the same
       name and	UUID, or to make slight	alterations in the  snapshot  metadata
       (such  as host-specific aspects of the domain XML embedded in the snap-
       shot).  When this flag is supplied, the xmlfile argument	is  mandatory,
       and the domain's	current	snapshot will not be altered unless the	--cur-
       rent flag is also given.

       If --no-metadata	is specified, then the snapshot	data is	 created,  but
       any  metadata is	immediately discarded (that is,	libvirt	does not treat
       the snapshot as current,	and cannot revert to the snapshot unless --re-
       define is later used to teach libvirt about the metadata	again).

       If  --reuse-external is specified, and the snapshot XML requests	an ex-
       ternal snapshot with a destination of an	existing file, then the	desti-
       nation  must exist and be pre-created with correct format and metadata.
       The file	is then	reused;	otherwise, a snapshot is refused to avoid los-
       ing contents of the existing files.

       If  --quiesce  is  specified,  libvirt  will  try to use	guest agent to
       freeze and unfreeze domain's mounted file systems. However,  if	domain
       has  no	guest agent, snapshot creation will fail.  Currently, this re-
       quires --disk-only to be	passed as well.

       If --atomic is specified, libvirt will guarantee	that the snapshot  ei-
       ther  succeeds,	or  fails with no changes; not all hypervisors support
       this.  If this flag is not specified, then some	hypervisors  may  fail
       after  partially	performing the action, and dumpxml must	be used	to see
       whether any partial changes occurred.

       If --live is specified, libvirt takes the snapshot while	the  guest  is
       running.	 Both disk snapshot and	domain memory snapshot are taken. This
       increases the size of the memory	image of the external  snapshot.  This
       is currently supported only for full system external snapshots.

       Existence of snapshot metadata will prevent attempts to undefine	a per-
       sistent guest.  However,	for transient domains,	snapshot  metadata  is
       silently	lost when the domain quits running (whether by command such as
       destroy or by internal guest action).

       For now,	it is not possible to create snapshots in a  domain  that  has
       checkpoints,  although  this restriction	will be	lifted in a future re-
       lease.

   snapshot-create-as
       Syntax:

	  snapshot-create-as domain {[--print-xml] [--no-metadata]
	     [--halt] [--reuse-external]} [name]
	     [description] [--disk-only	[--quiesce]] [--atomic]	[--validate]
	     [[--live] [--memspec memspec]] [--diskspec] diskspec]...

       Create a	snapshot for domain domain with	the given <name> and <descrip-
       tion>;  if  either  value  is omitted, libvirt will choose a value.  If
       --print-xml is specified, then XML appropriate for  snapshot-create  is
       output, rather than actually creating a snapshot.  Otherwise, if	--halt
       is specified, the domain	will be	left in	an inactive  state  after  the
       snapshot	is created, and	if --disk-only is specified, the snapshot will
       not include vm state.

       The --memspec option can	be used	to control whether a full system snap-
       shot  is	 internal  or external.	 The --memspec flag is mandatory, fol-
       lowed by	a memspec of the form [file=]name[,snapshot=type], where  type
       can  be	no,  internal,	or  external.	To  include a literal comma in
       file=name, escape it with a second comma. --memspec cannot be used  to-
       gether with --disk-only.

       The --diskspec option can be used to control how	--disk-only and	exter-
       nal full	system snapshots create	external files.	 This option can occur
       multiple	 times,	 according to the number of <disk> elements in the do-
       main   xml.    Each   <diskspec>	  is   in   the	   form	   disk[,snap-
       shot=type][,driver=type][,stype=type][,file=name].   A diskspec must be
       provided	for disks backed by block devices as libvirt doesn't auto-gen-
       erate file names	for those.  The	optional stype parameter allows	one to
       control the type	of the source file. Supported values are  'file'  (de-
       fault)  and  'block'.  To  exclude a disk from an external snapshot use
       --diskspec disk,snapshot=no.

       To include a literal comma in disk or in	file=name, escape  it  with  a
       second  comma.	A literal --diskspec must precede each diskspec	unless
       all three of domain, name, and description are also present.  For exam-
       ple,  a	diskspec of "vda,snapshot=external,file=/path/to,,new" results
       in the following	XML:

	  <disk	name='vda' snapshot='external'>
	    <source file='/path/to,new'/>
	  </disk>

       If --reuse-external is specified, and the domain	XML or diskspec	option
       requests	 an  external snapshot with a destination of an	existing file,
       then the	destination must exist and be pre-created with correct	format
       and metadata. The file is then reused; otherwise, a snapshot is refused
       to avoid	losing contents	of the existing	files.

       If --quiesce is specified, libvirt will	try  to	 use  guest  agent  to
       freeze  and  unfreeze domain's mounted file systems. However, if	domain
       has no guest agent, snapshot creation will fail.	 Currently,  this  re-
       quires --disk-only to be	passed as well.

       If  --no-metadata  is specified,	then the snapshot data is created, but
       any metadata is immediately discarded (that is, libvirt does not	 treat
       the snapshot as current,	and cannot revert to the snapshot unless snap-
       shot-create is later used to teach libvirt about	the metadata again).

       If --atomic is specified, libvirt will guarantee	that the snapshot  ei-
       ther  succeeds,	or  fails with no changes; not all hypervisors support
       this.  If this flag is not specified, then some	hypervisors  may  fail
       after  partially	performing the action, and dumpxml must	be used	to see
       whether any partial changes occurred.

       If --live is specified, libvirt takes the snapshot while	the  guest  is
       running.	 This  increases  the size of the memory image of the external
       snapshot. This is currently supported only  for	external  full	system
       snapshots.

       For  now,  it  is not possible to create	snapshots in a domain that has
       checkpoints, although this restriction will be lifted in	a  future  re-
       lease.

       Optionally,  the	 --validate option can be passed to validate XML docu-
       ment which is internally	generated by this command against the internal
       RNG schema.

   snapshot-current
       Syntax:

	  snapshot-current domain {[--name] | [--security-info]	| [snapshotname]}

       Without	snapshotname,  this  will  output the snapshot XML for the do-
       main's current snapshot (if any).  If --name  is	 specified,  just  the
       current	snapshot name instead of the full xml.	Otherwise, using --se-
       curity-info will	also include security  sensitive  information  in  the
       XML.

       With  snapshotname,  this is a request to make the existing named snap-
       shot become the current snapshot, without reverting the domain.

   snapshot-edit
       Syntax:

	  snapshot-edit	domain [snapshotname] [--current] {[--rename] |	[--clone]}

       Edit the	XML configuration file for snapshotname	of a domain.  If  both
       snapshotname  and  --current are	specified, also	force the edited snap-
       shot to become the current snapshot.  If	snapshotname is	omitted,  then
       --current must be supplied, to edit the current snapshot.

       This is equivalent to:

	  virsh	snapshot-dumpxml dom name > snapshot.xml
	  vi snapshot.xml (or make changes with	your other text	editor)
	  virsh	snapshot-create	dom snapshot.xml --redefine [--current]

       except that it does some	error checking.

       The  editor  used can be	supplied by the	$VISUAL	or $EDITOR environment
       variables, and defaults to vi.

       If --rename is specified, then the edits	can change the snapshot	 name.
       If  --clone is specified, then changing the snapshot name will create a
       clone of	the snapshot metadata.	If neither is specified, then the  ed-
       its  must  not change the snapshot name.	 Note that changing a snapshot
       name must be done with care, since the contents of some snapshots, such
       as  internal  snapshots within a	single qcow2 file, are accessible only
       from the	original name.

   snapshot-info
       Syntax:

	  snapshot-info	domain {snapshot | --current}

       Output basic information	about a	named <snapshot>, or the current snap-
       shot with --current.

   snapshot-list
       Syntax:

	  snapshot-list	domain [--metadata] [--no-metadata]
	     [{--parent	| --roots | [{--tree | --name}]}] [--topological]
	     [{[--from]	snapshot | --current} [--descendants]]
	     [--leaves]	[--no-leaves] [--inactive] [--active]
	     [--disk-only] [--internal]	[--external]

       List all	of the available snapshots for the given domain, defaulting to
       show columns for	the snapshot name, creation time, and domain state.

       Normally, table form output is sorted by	snapshot name;	using  --topo-
       logical	instead	 sorts so that no child	is listed before its ancestors
       (although there may be more than	one possible ordering with this	 prop-
       erty).

       If  --parent  is	specified, add a column	to the output table giving the
       name of the parent of each snapshot.  If	--roots	is specified, the list
       will  be	filtered to just snapshots that	have no	parents.  If --tree is
       specified, the output will be in	a tree format, listing	just  snapshot
       names.  These three options are mutually	exclusive. If --name is	speci-
       fied only the snapshot name is printed. This option is mutually	exclu-
       sive with --tree.

       If  --from is provided, filter the list to snapshots which are children
       of the given snapshot; or if --current is provided, start at  the  cur-
       rent  snapshot.	 When  used in isolation or with --parent, the list is
       limited to direct children unless --descendants is also present.	  When
       used  with --tree, the use of --descendants is implied.	This option is
       not compatible with --roots.  Note that the starting point of --from or
       --current  is not included in the list unless the --tree	option is also
       present.

       If --leaves is specified, the list will be filtered to  just  snapshots
       that have no children.  Likewise, if --no-leaves	is specified, the list
       will be filtered	to just	snapshots with children.  (Note	that  omitting
       both  options  does no filtering, while providing both options will ei-
       ther produce the	same list or error out depending on whether the	server
       recognizes  the	flags).	  Filtering  options  are  not compatible with
       --tree.

       If --metadata is	specified, the list will be filtered to	just snapshots
       that  involve  libvirt  metadata,  and thus would prevent undefine of a
       persistent guest, or be lost on destroy of a transient  domain.	 Like-
       wise,  if --no-metadata is specified, the list will be filtered to just
       snapshots that exist without the	need for libvirt metadata.

       If --inactive is	specified, the list will be filtered to	snapshots that
       were taken when the domain was shut off.	 If --active is	specified, the
       list will be filtered to	snapshots that were taken when the domain  was
       running,	 and where the snapshot	includes the memory state to revert to
       that running state.  If --disk-only is specified, the list will be fil-
       tered  to  snapshots  that  were	taken when the domain was running, but
       where the snapshot includes only	disk state.

       If --internal is	specified, the list will be filtered to	snapshots that
       use  internal storage of	existing disk images.  If --external is	speci-
       fied, the list will be filtered to snapshots that  use  external	 files
       for disk	images or memory state.

   snapshot-dumpxml
       Syntax:

	  snapshot-dumpxml domain snapshot [--security-info]

       Output  the snapshot XML	for the	domain's snapshot named	snapshot.  Us-
       ing --security-info will	also include security  sensitive  information.
       Use snapshot-current to easily access the XML of	the current snapshot.

   snapshot-parent
       Syntax:

	  snapshot-parent domain {snapshot | --current}

       Output the name of the parent snapshot, if any, for the given snapshot,
       or for the current snapshot with	--current.

   snapshot-revert
       Syntax:

	  snapshot-revert domain {snapshot | --current}	[{--running | --paused}] [--force]

       Revert the given	domain to the snapshot specified by  snapshot,	or  to
       the  current snapshot with --current.  Be aware that this is a destruc-
       tive action; any	changes	in the domain  since  the  last	 snapshot  was
       taken will be lost.  Also note that the state of	the domain after snap-
       shot-revert is complete will be the state of the	domain at the time the
       original	snapshot was taken.

       Normally, reverting to a	snapshot leaves	the domain in the state	it was
       at the time the snapshot	was created, except that a disk	snapshot  with
       no vm state leaves the domain in	an inactive state.  Passing either the
       --running or --paused flag will perform additional state	changes	 (such
       as  booting  an	inactive  domain, or pausing a running domain).	 Since
       transient domains cannot	be inactive, it	is  required  to  use  one  of
       these flags when	reverting to a disk snapshot of	a transient domain.

       There  are  a  number  of  cases	where a	snapshot revert	involves extra
       risk, which requires the	use of --force to proceed:

	  o One	is the case of a snapshot that lacks full  domain  information
	    for	 reverting  configuration  (such as snapshots created prior to
	    libvirt 0.9.5); since libvirt cannot prove that the	 current  con-
	    figuration	matches	 what  was in use at the time of the snapshot,
	    supplying --force assures libvirt that the snapshot	is  compatible
	    with  the current configuration (and if it is not, the domain will
	    likely fail	to run).

	  o Another is the case	of reverting from a running domain to  an  ac-
	    tive  state	 where	a new hypervisor has to	be created rather than
	    reusing the	existing hypervisor, because it	implies	drawbacks such
	    as	breaking any existing VNC or Spice connections;	this condition
	    happens with an active snapshot that uses a	provably  incompatible
	    configuration,  as	well as	with an	inactive snapshot that is com-
	    bined with the --start or --pause flag.

	  o Also, libvirt will refuse to restore snapshots  of	inactive  QEMU
	    domains  while there is managed saved state. This is because those
	    snapshots do not contain memory state and will therefore  not  re-
	    place the existing memory state. This ends up switching a disk un-
	    derneath a running system and will likely cause extensive filesys-
	    tem	corruption or crashes due to swap content mismatches when run.

   snapshot-delete
       Syntax:

	  snapshot-delete domain {snapshot | --current}
	     [--metadata] [{--children | --children-only}]

       Delete the snapshot for the domain named	snapshot, or the current snap-
       shot with --current.  If	this snapshot  has  child  snapshots,  changes
       from  this snapshot will	be merged into the children.  If --children is
       passed, then delete this	snapshot and any children  of  this  snapshot.
       If  --children-only  is	passed,	then delete any	children of this snap-
       shot, but leave this snapshot intact.  These two	flags are mutually ex-
       clusive.

       If  --metadata  is  specified,  then  only delete the snapshot metadata
       maintained by libvirt, while leaving the	snapshot contents  intact  for
       access  by  external  tools; otherwise deleting a snapshot also removes
       the data	contents from that point in time.

CHECKPOINT COMMANDS
       The following  commands	manipulate  domain  checkpoints.   Checkpoints
       serve  as a point in time to identify which portions of a guest's disks
       have changed after that time, making it possible	to perform incremental
       and  differential  backups.   Checkpoints  are identified with a	unique
       name.  See https://libvirt.org/formatcheckpoint.html for	 documentation
       of the XML format used to represent properties of checkpoints.

   checkpoint-create
       Syntax:

	  checkpoint-create domain [xmlfile] { --redefine [--redefine-validate]	| [--quiesce]}

       Create  a checkpoint for	domain domain with the properties specified in
       xmlfile describing a <domaincheckpoint> top-level element.  The	format
       of  the input XML file will be validated	against	an internal RNG	schema
       (identical to using the virt-xml-validate(1) tool). If xmlfile is  com-
       pletely	omitted,  then	libvirt	 will  create a	checkpoint with	a name
       based on	the current time.

       If --redefine is	specified, then	all XML	elements  produced  by	check-
       point-dumpxml are valid;	this can be used to migrate checkpoint hierar-
       chy from	one machine to another,	to recreate hierarchy for the case  of
       a  transient domain that	goes away and is later recreated with the same
       name and	UUID, or to make slight	alterations in the checkpoint metadata
       (such as	host-specific aspects of the domain XML	embedded in the	check-
       point).	When this flag is supplied, the	xmlfile	argument is mandatory.

       If --redefine-validate is specified along with --redefine the  hypervi-
       sor  performs  validation  of  metadata	associated with	the checkpoint
       stored in places	besides	the checkpoint XML. Note that some hypervisors
       may require that	the domain is running to perform validation.

       If  --quiesce  is  specified,  libvirt  will  try to use	guest agent to
       freeze and unfreeze domain's mounted file systems. However,  if	domain
       has no guest agent, checkpoint creation will fail.

       Existence  of  checkpoint  metadata will	prevent	attempts to undefine a
       persistent guest.  However, for transient domains, checkpoint  metadata
       is silently lost	when the domain	quits running (whether by command such
       as destroy or by	internal guest action).

       For now,	it is not possible to create checkpoints in a domain that  has
       snapshots,  although  this  restriction	will be	lifted in a future re-
       lease.

   checkpoint-create-as
       Syntax:

	  checkpoint-create-as domain [--print-xml] [name]
	     [description] [--quiesce] [--diskspec] diskspec]...

       Create a	checkpoint for domain domain with the given  <name>  and  <de-
       scription>;  if	either	value is omitted, libvirt will choose a	value.
       If --print-xml is specified, then XML appropriate for checkpoint-create
       is output, rather than actually creating	a checkpoint.

       The --diskspec option can be used to control which guest	disks partici-
       pate in the checkpoint. This option can occur multiple times, according
       to the number of	<disk> elements	in the domain xml.  Each <diskspec> is
       in the form disk[,checkpoint=type][,bitmap=name]. A literal  --diskspec
       must  precede  each  diskspec unless all	three of domain, name, and de-
       scription are also present.  For	example,  a  diskspec  of  "vda,check-
       point=bitmap,bitmap=map1" results in the	following XML:

	  <disk	name='vda' checkpoint='bitmap' bitmap='map1'/>

       If  --quiesce  is  specified,  libvirt  will  try to use	guest agent to
       freeze and unfreeze domain's mounted file systems. However,  if	domain
       has no guest agent, checkpoint creation will fail.

       For  now, it is not possible to create checkpoints in a domain that has
       snapshots, although this	restriction will be lifted  in	a  future  re-
       lease.

   checkpoint-edit
       Syntax:

	  checkpoint-edit domain checkpointname

       Edit the	XML configuration file for checkpointname of a domain.

       This is equivalent to:

	  virsh	checkpoint-dumpxml dom name > checkpoint.xml
	  vi checkpoint.xml (or	make changes with your other text editor)
	  virsh	checkpoint-create dom checkpoint.xml --redefine

       except  that  it	 does  some  error  checking, including	that the edits
       should not attempt to change the	checkpoint name.

       The editor used can be supplied by the $VISUAL or  $EDITOR  environment
       variables, and defaults to vi.

   checkpoint-info
       Syntax:

	  checkpoint-info domain checkpoint

       Output basic information	about a	named <checkpoint>.

   checkpoint-list
       Syntax:

	  checkpoint-list domain [{--parent | --roots |
	     [{--tree |	--name}]}] [--topological]
	     [[--from] checkpoint | [--descendants]]
	     [--leaves]	[--no-leaves]

       List  all of the	available checkpoints for the given domain, defaulting
       to show columns for the checkpoint name and creation time.

       Normally, table form output is sorted by	checkpoint name; using --topo-
       logical	instead	 sorts so that no child	is listed before its ancestors
       (although there may be more than	one possible ordering with this	 prop-
       erty).

       If  --parent  is	specified, add a column	to the output table giving the
       name of the parent of each checkpoint.  If --roots  is  specified,  the
       list  will  be  filtered	 to just checkpoints that have no parents.  If
       --tree is specified, the	output will be in a tree format, listing  just
       checkpoint  names.   These  three  options  are	mutually exclusive. If
       --name is specified only	the checkpoint name is printed.	This option is
       mutually	exclusive with --tree.

       If  --from  is provided,	filter the list	to checkpoints which are chil-
       dren of the given checkpoint.  When used	in isolation or	with --parent,
       the  list  is  limited  to direct children unless --descendants is also
       present.	 When used with	--tree,	the use	of --descendants  is  implied.
       This  option  is	 not  compatible with --roots.	Note that the starting
       point of	--from is not included in the list unless the --tree option is
       also present.

       If --leaves is specified, the list will be filtered to just checkpoints
       that have no children.  Likewise, if --no-leaves	is specified, the list
       will  be	 filtered to just checkpoints with children.  (Note that omit-
       ting both options does no filtering, while providing both options  will
       either  produce	the  same  list	 or error out depending	on whether the
       server recognizes the flags).  Filtering	 options  are  not  compatible
       with --tree.

   checkpoint-dumpxml
       Syntax:

	  checkpoint-dumpxml domain checkpoint [--security-info] [--no-domain] [--size]

       Output the checkpoint XML for the domain's checkpoint named checkpoint.
       Using --security-info will also include security	sensitive information.

       Using --size will add XML indicating the	current	size in	bytes of guest
       data that has changed since the checkpoint was created (although	remem-
       ber that	guest activity between a size check and	 actually  creating  a
       backup can result in the	backup needing slightly	more space). Note that
       some hypervisors	may require that domain	 is  running  when  --size  is
       used.

       Using  --no-domain will omit the	<domain> element from the output for a
       more compact view.

   checkpoint-parent
       Syntax:

	  checkpoint-parent domain checkpoint

       Output the name of the parent checkpoint, if any, for the given	check-
       point.

   checkpoint-delete
       Syntax:

	  checkpoint-delete domain checkpoint
	     [--metadata] [{--children | --children-only}]

       Delete  the  checkpoint for the domain named checkpoint.	 The record of
       which portions of the disk changed since	the checkpoint are merged into
       the  parent  checkpoint	(if any). If --children	is passed, then	delete
       this checkpoint and  any	 children  of  this  checkpoint.   If  --chil-
       dren-only  is  passed, then delete any children of this checkpoint, but
       leave this checkpoint intact. These two flags are mutually exclusive.

       If --metadata is	specified, then	only delete  the  checkpoint  metadata
       maintained by libvirt, while leaving the	checkpoint contents intact for
       access by external tools; otherwise deleting a checkpoint also  removes
       the ability to perform an incremental backup from that point in time.

NWFILTER COMMANDS
       The  following commands manipulate network filters. Network filters al-
       low filtering of	the network traffic coming from	and going  to  virtual
       machines.   Individual  network	traffic	filters	are written in XML and
       may contain references to other network filters,	describe traffic  fil-
       tering  rules,  or contain both.	Network	filters	are referenced by vir-
       tual machines from within their interface description. A	network	filter
       may be referenced by multiple virtual machines' interfaces.

   nwfilter-define
       Syntax:

	  nwfilter-define xmlfile

       Make  a	new  network filter known to libvirt. If a network filter with
       the same	name already exists, it	will be	replaced  with	the  new  XML.
       Any  running  virtual machine referencing this network filter will have
       its network traffic rules adapted. If for any reason the	network	 traf-
       fic  filtering  rules cannot be instantiated by any of the running vir-
       tual machines, then the new XML will be rejected.

   nwfilter-undefine
       Syntax:

	  nwfilter-undefine nwfilter-name

       Delete a	network	filter.	The deletion will fail if any running  virtual
       machine is currently using this network filter.

   nwfilter-list
       Syntax:

	  nwfilter-list

       List all	of the available network filters.

   nwfilter-dumpxml
       Syntax:

	  nwfilter-dumpxml nwfilter-name

       Output the network filter XML.

   nwfilter-edit
       Syntax:

	  nwfilter-edit	nwfilter-name

       Edit the	XML of a network filter.

       This is equivalent to:

	  virsh	nwfilter-dumpxml myfilter > myfilter.xml
	  vi myfilter.xml (or make changes with	your other text	editor)
	  virsh	nwfilter-define	myfilter.xml

       except that it does some	error checking.	 The new network filter	may be
       rejected	due to the same	reason as mentioned in nwfilter-define.

       The editor used can be supplied by the $VISUAL or  $EDITOR  environment
       variables, and defaults to vi.

NWFILTER BINDING COMMANDS
       The following commands manipulate network filter	bindings. Network fil-
       ter bindings track the association between a network port and a network
       filter.	Generally the bindings are managed automatically by the	hyper-
       visor drivers when adding/removing NICs on a guest.

       If an admin is creating/deleting	TAP devices for	non-guest usage,  how-
       ever,  the network filter binding commands provide a way	to make	use of
       the network filters directly.

   nwfilter-binding-create
       Syntax:

	  nwfilter-binding-create xmlfile

       Associate a network port	with a	network	 filter.  The  network	filter
       backend will immediately	attempt	to instantiate the filter rules	on the
       port. This command may be used to associate a filter with  a  currently
       running	guest  that does not have a filter defined for a specific net-
       work port. Since	the bindings are generally  automatically  managed  by
       the  hypervisor,	 using	this  command to define	a filter for a network
       port and	then starting the guest	afterwards may prevent the guest  from
       starting	 if it attempts	to use the network port	and finds a filter al-
       ready defined.

   nwfilter-binding-delete
       Syntax:

	  nwfilter-binding-delete port-name

       Disassociate a network port from	a network filter. The  network	filter
       backend	will  immediately tear down the	filter rules that exist	on the
       port. This command may be used to remove	the network port binding for a
       filter  currently in use	for the	guest while the	guest is running with-
       out needing to restart the guest. Restoring the	network	 port  binding
       filter  for  the	 running  guest	 would be accomplished by using	nwfil-
       ter-binding-create.

   nwfilter-binding-list
       Syntax:

	  nwfilter-binding-list

       List all	of the network ports which have	filters	associated with	them.

   nwfilter-binding-dumpxml
       Syntax:

	  nwfilter-binding-dumpxml port-name

       Output the network filter binding XML for  the  network	device	called
       port-name.

HYPERVISOR-SPECIFIC COMMANDS
       NOTE:  Use of the following commands is strongly	discouraged.  They can
       cause libvirt to	become confused	and do the wrong thing	on  subsequent
       operations.   Once  you	have used these	commands, please do not	report
       problems	to the libvirt developers; the reports will  be	 ignored.   If
       you  find that these commands are the only way to accomplish something,
       then it is better to request that the feature be	added as a first-class
       citizen in the regular libvirt library.

   qemu-attach
       Syntax:

	  qemu-attach pid

       Attach  an externally launched QEMU process to the libvirt QEMU driver.
       The QEMU	process	must have been created with a monitor connection using
       the UNIX	driver.	Ideally	the process will also have had the '-name' ar-
       gument specified.

	  $ qemu-kvm -cdrom ~/demo.iso \
	      -monitor unix:/tmp/demo,server,nowait \
	      -name foo	\
	      -uuid cece4f9f-dff0-575d-0e8e-01fe380f12ea  &
	  $ QEMUPID=$!
	  $ virsh qemu-attach $QEMUPID

       Not all functions of libvirt are	expected to work  reliably  after  at-
       taching	to  an	externally  launched QEMU process. There may be	issues
       with the	guest ABI changing upon	migration and device hotplug or	hotun-
       plug  may  not work. The	attached environment should be considered pri-
       marily read-only.

   qemu-monitor-command
       Syntax:

	  qemu-monitor-command domain {	[--hmp]	| [--pretty] [--return-value] }	command...

       Send an arbitrary monitor command command to domain domain through  the
       QEMU monitor.  The results of the command will be printed on stdout.

       If  more	 than  one argument is provided	for command, they are concate-
       nated with a space in between before passing the	single command to  the
       monitor.

       Note that libvirt uses the QMP to talk to qemu so command must be valid
       JSON in QMP format to work properly.

       If --pretty is given the	QMP reply is pretty-printed.

       If --return-value is given the 'return' key of the QMP response	object
       is extracted rather than	passing	through	the full reply from QEMU.

       If  --hmp  is  passed,  the command is considered to be a human monitor
       command and libvirt will	automatically convert it into QMP and  convert
       the result back.

   qemu-agent-command
       Syntax:

	  qemu-agent-command domain [--timeout seconds | --async | --block] command...

       Send  an	arbitrary guest	agent command command to domain	domain through
       QEMU agent.  --timeout, --async	and  --block  options  are  exclusive.
       --timeout  requires  timeout  seconds  seconds and it must be positive.
       When --aysnc is given, the command waits	for timeout whether success or
       failed.	And  when  --block  is	given,	the command waits forever with
       blocking	timeout.

   qemu-monitor-event
       Syntax:

	  qemu-monitor-event [domain] [--event event-name]
	    [--loop] [--timeout	seconds] [--pretty] [--regex] [--no-case]
	    [--timestamp]

       Wait for	arbitrary QEMU monitor events to occur,	and print out the  de-
       tails  of events	as they	happen.	 The events can	optionally be filtered
       by domain or event-name.	 The 'query-events' QMP	command	 can  be  used
       via  qemu-monitor-command  to  learn  what  events  are	supported.  If
       --regex is used,	event-name is a	basic regular expression instead of  a
       literal	string.	  If --no-case is used,	event-name will	match case-in-
       sensitively.

       By default, this	command	is one-shot, and returns success once an event
       occurs;	you  can send SIGINT (usually via Ctrl-C) to quit immediately.
       If --timeout is specified, the command gives up waiting for events  af-
       ter  seconds  have elapsed.  With --loop, the command prints all	events
       until a timeout or interrupt key.  If --pretty is specified,  any  JSON
       event details are pretty-printed	for better legibility.

       When  --timestamp  is  used, a human-readable timestamp will be printed
       before the event, and the timing	information provided by	QEMU  will  be
       omitted.

   lxc-enter-namespace
       Syntax:

	  lxc-enter-namespace domain [--noseclabel] --
	     /path/to/binary [arg1, [arg2, ...]]

       Enter  the  namespace of	domain and execute the command /path/to/binary
       passing the requested args. The binary path is  relative	 to  the  con-
       tainer  root  filesystem, not the host root filesystem. The binary will
       inherit the environment variables / console visible to virsh. The  com-
       mand  will  be run with the same	sVirt context and cgroups placement as
       processes within	the container. This command only works when  connected
       to   the	  LXC  hypervisor  driver.   This  command  succeeds  only  if
       /path/to/binary has 0 exit status.

       By default the new process will run with	the security label of the  new
       parent  container.  Use	the  --noseclabel  option  to instead have the
       process keep the	same security label as virsh.

ENVIRONMENT
       The following environment variables can be set to alter	the  behaviour
       of virsh

       o VIRSH_DEBUG=<0	to 4>

	 Turn on verbose debugging of virsh commands. Valid levels are

	 o VIRSH_DEBUG=0

	   DEBUG - Messages at ALL levels get logged

	 o VIRSH_DEBUG=1

	   INFO	- Logs messages	at levels INFO,	NOTICE,	WARNING	and ERROR

	 o VIRSH_DEBUG=2

	   NOTICE - Logs messages at levels NOTICE, WARNING and	ERROR

	 o VIRSH_DEBUG=3

	   WARNING - Logs messages at levels WARNING and ERROR

	 o VIRSH_DEBUG=4

	   ERROR - Messages at only ERROR level	gets logged.

       o VIRSH_LOG_FILE=``LOGFILE``

	 The file to log virsh debug messages.

       o VIRSH_DEFAULT_CONNECT_URI

	 The  hypervisor  to  connect to by default. Set this to a URI,	in the
	 same format as	accepted by the	connect	option.	This environment vari-
	 able  is deprecated in	favour of the global LIBVIRT_DEFAULT_URI vari-
	 able which serves the same purpose.

       o LIBVIRT_DEFAULT_URI

	 The hypervisor	to connect to by default. Set this to a	 URI,  in  the
	 same format as	accepted by the	connect	option.	This overrides the de-
	 fault URI set in any client config file  and  prevents	 libvirt  from
	 probing for drivers.

       o VISUAL

	 The editor to use by the edit and related options.

       o EDITOR

	 The  editor  to use by	the edit and related options, if VISUAL	is not
	 set.

       o VIRSH_HISTSIZE

	 The number of commands	to remember in the command  history.  The  de-
	 fault value is	500.

       o LIBVIRT_DEBUG=LEVEL

	 Turn on verbose debugging of all libvirt API calls. Valid levels are

	 o LIBVIRT_DEBUG=1

	   Messages at level DEBUG or above

	 o LIBVIRT_DEBUG=2

	   Messages at level INFO or above

	 o LIBVIRT_DEBUG=3

	   Messages at level WARNING or	above

	 o LIBVIRT_DEBUG=4

	   Messages at level ERROR

       For    further	 information	about	 debugging   options   consult
       https://libvirt.org/logging.html

BUGS
       Please report all bugs you discover.  This should be done via either:

       1. the mailing list

	  https://libvirt.org/contact.html

       2. the bug tracker

	  https://libvirt.org/bugs.html

       Alternatively, you may report bugs to your software distributor /  ven-
       dor.

AUTHORS
       Please refer to the AUTHORS file	distributed with libvirt.

COPYRIGHT
       Copyright  (C) 2005, 2007-2015 Red Hat, Inc., and the authors listed in
       the libvirt AUTHORS file.

LICENSE
       virsh is	distributed under the terms of the GNU LGPL v2+.  This is free
       software;  see the source for copying conditions. There is NO warranty;
       not even	for MERCHANTABILITY or FITNESS FOR A PARTICULAR	PURPOSE

SEE ALSO
       virt-install(1),	  virt-xml-validate(1),	   virt-top(1),	   virt-df(1),
       https://libvirt.org/

								      VIRSH(1)

NAME | SYNOPSIS | DESCRIPTION | NOTES | GENERIC COMMANDS | DOMAIN COMMANDS | DEVICE COMMANDS | NODEDEV COMMANDS | VIRTUAL NETWORK COMMANDS | NETWORK PORT COMMANDS | INTERFACE COMMANDS | STORAGE POOL COMMANDS | VOLUME COMMANDS | SECRET COMMANDS | SNAPSHOT COMMANDS | CHECKPOINT COMMANDS | NWFILTER COMMANDS | NWFILTER BINDING COMMANDS | HYPERVISOR-SPECIFIC COMMANDS | ENVIRONMENT | BUGS | AUTHORS | COPYRIGHT | LICENSE | SEE ALSO

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=virsh&sektion=1&manpath=FreeBSD+13.0-RELEASE+and+Ports>

home | help