Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
VICTRONUPS(8)			  NUT Manual			 VICTRONUPS(8)

NAME
       victronups - Driver for IMV/Victron UPS unit Match, Match Lite, NetUps

NOTE
       This man	page only documents the	hardware-specific features of the the
       victronups driver. For information about	the core driver, see
       nutupsdrv(8).

SUPPORTED HARDWARE
       The victronups driver should recognize all Victron models that use a
       serial protocol at 1200 bps. These include Match	Lite, Match and	the
       NetUps line.

       The Match Lite line may only report a handful of	variables. This	is
       usually not a bug - they	just don't support anything else.

CABLING
       If your Victron cable is	broken or missing, use this diagram to build a
       clone:

       docs/cables/victron.txt

EXTRA ARGUMENTS
       This driver supports the	following optional setting in the ups.conf(5):

       modelname=name
	   Set model name

       usd=delay
	   Set delay before shutdown on	UPS

BUGS
       The protocol for	this UPS is not	officially documented.

AUTHOR
       Radek Benedikt <benedikt@lphard.cz>, Daniel Prynych
       <Daniel.Prynych@hornet.cz>

SEE ALSO
   The core driver:
       nutupsdrv(8)

   Internet resources:
       The NUT (Network	UPS Tools) home	page: http://www.networkupstools.org/

Network	UPS Tools 2.7.4.	  03/01/2021			 VICTRONUPS(8)

NAME | NOTE | SUPPORTED HARDWARE | CABLING | EXTRA ARGUMENTS | BUGS | AUTHOR | SEE ALSO

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=victronups&sektion=8&manpath=FreeBSD+13.0-RELEASE+and+Ports>

home | help