Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
VDE_PLUG(1)		    General Commands Manual		   VDE_PLUG(1)

NAME
       vde_plug	 -  Virtual Distributed	Ethernet plug (two plugs creates a vde
       cable)

SYNOPSIS
       vde_plug	[ -p portnum ] [ -g group ] [ -m octal-mode ] [	socketdir ]

DESCRIPTION
       A vde_plug is a plug to be connected into a VDE switch.	All  the  data
       that  is	 catched  by  the plug is written in its stdout	and everything
       from stdin is injected in the switch.

       This tool has been designed to be used together with dpipe (1)  to  in-
       terconnect  a  second  vde_plug to another switch, working as a virtual
       ethernet	crossed	cable between the two switches.

       The command
	      dpipe vde_plug = vde_plug	/tmp/vde2.ctl
       connects	two local switches: the	former is using	the  standard  control
       socket /tmp/vde.ctl while the latter is using /tmp/vde2.ctl.

       The command
	      dpipe vde_plug = ssh remote.machine.org vde_plug
       connects	 two  remote  switches.	 If the	two vde_switches run as	daemon
       and they	are connected to tap interfaces	a level	2 encrypted tunnel  is
       established.

       vde_plug	 can also be established as a login shell for users.  The fol-
       lowing command works as in the previous example
	      dpipe vde_plug = ssh vdeuser@remote.machine.org vde_plug
       where vdeuser is	the user with vde_plug as standard shell.  All the re-
       mote  accesses  are logged by syslog at the beginning and at the	end of
       each session.  Attempt to login without the command vde_plug at the end
       or  trying  to  execute	something  else	are blocked and	the attempt is
       logged into syslog.

OPTIONS
       -p portnum
	      It is possible to	decide which port of the switch	to use.	  When
	      this option is not specified the switch assigns the first	avail-
	      able unused port (if any).  It is	possible  to  connect  several
	      cables in	the same switch	port: in this way all this cables work
	      concurrently.  It	means that packet can result as	duplicate  but
	      no  ARP  table  loops are	generated.  Is useful when vde is used
	      for mobility. Several physical interfaces	can be used at a  time
	      during handoffs to prevent hichups in connectivity.

       -g group
	      group  ownership	of the communication socket. For security when
	      more want	to share a switch it is	better to use a	unix group  to
	      own  the	comm  sockets  so  that	 the network traffic cannot be
	      sniffed.

       -m octal-mode
	      octal chmod like permissions for the comm	sockets

       socketdir
	      (This option can be also set as: -sock socketdir )  specify  the
	      directory	 which	contains  the  UNIX socket to be used by local
	      programs	for  joining  the   VDE.    The	  default   value   is
	      "/tmp/vde.ctl",	  which	    corresponds	   to	 the	socket
	      "/tmp/vde.ctl/ctl" (or /var/run/vde.ctl when the vde_switch runs
	      as a shared daemon).  It is possible for users to	redefine their
	      default switch as	".vde-2/stdsock" in their home	directory.  If
	      exist, this directory (or	symbolic link to the actual directory)
	      is used as the default value for the user.

NOTICE
       Virtual Distributed Ethernet is not related in any way with www.vde.com
       ("Verband  der Elektrotechnik, Elektronik und Informationstechnik" i.e.
       the German "Association for Electrical, Electronic & Information	 Tech-
       nologies").

SEE ALSO
       vde_switch(1), vde_plug2tap(1), vdeq(1),	dpipe(1).

AUTHOR
       VDE is a	project	by Renzo Davoli	<renzo@cs.unibo.it>

Virtual	Distributed Ethernet   December	6, 2006			   VDE_PLUG(1)

NAME | SYNOPSIS | DESCRIPTION | OPTIONS | NOTICE | SEE ALSO | AUTHOR

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=vde_plug&sektion=1&manpath=FreeBSD+12.0-RELEASE+and+Ports>

home | help