Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
UVSCOM(4)		 BSD Kernel Interfaces Manual		     UVSCOM(4)

NAME
     uvscom -- USB support for SUNTAC Slipper U	VS-10U serial adapters driver

SYNOPSIS
     To	compile	this driver into the kernel, place the following lines in your
     kernel configuration file:

	   device usb
	   device ucom
	   device uvscom

     Alternatively, to load the	driver as a module at boot time, place the
     following line in loader.conf(5):

	   uvscom_load="YES"

HARDWARE
     The uvscom	driver supports	the following adapters:

     +o	 DDI Pocket Air	H" C@rd
     +o	 DDI Pocket Air	H" C@rd	64
     +o	 NTT P-in
     +o	 NTT P-in m@ster

DESCRIPTION
     The uvscom	driver provides	support	for the	SUNTAC Slipper U VS-10U	chip.
     Slipper U is a PC Card to USB converter for data communication card
     adapters.

     The device	is accessed through the	ucom(4)	driver which makes it behave
     like a tty(4).

FILES
     /dev/ttyU*	      for callin ports
     /dev/ttyU*.init
     /dev/ttyU*.lock  corresponding callin initial-state and lock-state	de-
		      vices

     /dev/cuaU*	      for callout ports
     /dev/cuaU*.init
     /dev/cuaU*.lock  corresponding callout initial-state and lock-state de-
		      vices

SEE ALSO
     tty(4), ucom(4), usb(4)

HISTORY
     The uvscom	driver first appeared in FreeBSD and later in NetBSD 1.6.
     This manual page was adopted from NetBSD by Tom Rhodes
     <trhodes@FreeBSD.org> in April 2002.

BSD				April 26, 2017				   BSD

NAME | SYNOPSIS | HARDWARE | DESCRIPTION | FILES | SEE ALSO | HISTORY

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=uvscom&sektion=4&manpath=FreeBSD+12.0-RELEASE+and+Ports>

home | help