Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
uux(1)			    General Commands Manual			uux(1)

NAME
       uux - Remote command execution over UUCP

SYNOPSIS
       uux [ options ] command

DESCRIPTION
       The  uux	command	is used	to execute a command on	a remote system, or to
       execute a command on the	local system using files from remote  systems.
       The  command  is	 not executed immediately; the request is queued until
       the uucico (8) daemon calls the system and executes it.	The daemon  is
       started	automatically  unless  one  of the -r or --nouucico options is
       given.

       The actual command execution is done by the uuxqt (8) daemon.

       File arguments can be gathered from remote  systems  to	the  execution
       system,	as  can	 standard input.  Standard output may be directed to a
       file on a remote	system.

       The command name	may be preceded	by a system name followed by an	excla-
       mation point if it is to	be executed on a remote	system.	 An empty sys-
       tem name	is taken as the	local system.

       Each argument that contains an exclamation point	is treated as naming a
       file.  The system which the file	is on is before	the exclamation	point,
       and the pathname	on that	system follows it.  An empty  system  name  is
       taken  as  the  local system; this must be used to transfer a file to a
       command being executed on a remote system.  If the path	is  not	 abso-
       lute, it	will be	appended to the	current	working	directory on the local
       system; the result may not be meaningful	on the remote system.  A path-
       name may	begin with ~/, in which	case it	is relative to the UUCP	public
       directory (usually /var/spool/uucppublic) on the	appropriate system.  A
       pathname	 may  begin  with  ~name/, in which case it is relative	to the
       home directory of the named user	on the appropriate system.

       Standard	input and output may be	redirected  as	usual;	the  pathnames
       used may	contain	exclamation points to indicate that they are on	remote
       systems.	 Note that the redirection characters must be quoted  so  that
       they  are  passed  to uux rather	than interpreted by the	shell.	Append
       redirection (>>)	does not work.

       All specified files are gathered	together into a	single	directory  be-
       fore  execution	of the command begins.	This means that	each file must
       have a distinct base name.  For example,
	    uux	'sys1!diff sys2!~user1/foo sys3!~user2/foo >!foo.diff'
       will fail because both files will be copied to sys1  and	 stored	 under
       the name	foo.

       Arguments  may  be quoted by parentheses	to avoid interpretation	of ex-
       clamation points.  This is useful when executing	the uucp command on  a
       remote system.

       A  request  to execute an empty command (e.g., uux sys!)	 will create a
       poll file for the specified system.

OPTIONS
       The following options may be given to uux.

       -, -p, --stdin
	    Read standard input	and use	it as the standard input for the  com-
	    mand to be executed.

       -c, --nocopy
	    Do	not  copy local	files to the spool directory.  This is the de-
	    fault.  If they are	removed	before being processed by  the	uucico
	    (8)	daemon,	the copy will fail.  The files must be readable	by the
	    uucico (8) daemon, as well as the by the invoker of	uux.

       -C, --copy
	    Copy local files to	the spool directory.

       -l, --link
	    Link local files into the spool directory.	If a file can  not  be
	    linked  because it is on a different device, it will be copied un-
	    less one of	the -c or --nocopy  options  also  appears  (in	 other
	    words,  use	 of  --link  switches  the  default  from  --nocopy to
	    --copy).  If the files are changed before being processed  by  the
	    uucico  (8)	 daemon, the changed versions will be used.  The files
	    must be readable by	the uucico (8) daemon, as well as by  the  in-
	    voker of uux.

       -g grade, --grade grade
	    Set	 the  grade  of	 the  file transfer command.  Jobs of a	higher
	    grade are executed first.  Grades run 0 ...	9 A ...	Z a ...	z from
	    high to low.

       -n, --notification=no
	    Do not send	mail about the status of the job, even if it fails.

       -z, --notification=error
	    Send  mail	about  the  status of the job if an error occurs.  For
	    many uuxqt daemons,	including the Taylor UUCP uuxqt, this  is  the
	    default  action;  for those, --notification=error will have	no ef-
	    fect.  However, some uuxqt daemons will send mail if the job  suc-
	    ceeds  unless  the	--notification=error  option is	used, and some
	    other uuxqt	daemons	will not send mail if the job fails unless the
	    --notification=error option	is used.

       -r, --nouucico
	    Do	not  start  the	uucico (8) daemon immediately; merely queue up
	    the	execution request for later processing.

       -j, --jobid
	    Print jobids on standard output.  A	jobid will  be	generated  for
	    each file copy operation required to perform the operation.	 These
	    file copies	may be cancelled by passing the	jobid  to  the	--kill
	    switch  of uustat (1), which will make the execution impossible to
	    complete.

       -a address, --requestor address
	    Report job status to the specified e-mail address.

       -x type,	--debug	type
	    Turn on particular debugging types.	 The following types are  rec-
	    ognized:  abnormal,	chat, handshake, uucp-proto, proto, port, con-
	    fig, spooldir, execute, incoming, outgoing.	 Only  abnormal,  con-
	    fig, spooldir and execute are meaningful for uux.

	    Multiple  types may	be given, separated by commas, and the --debug
	    option may appear multiple times.  A number	 may  also  be	given,
	    which  will	 turn  on that many types from the foregoing list; for
	    example, --debug 2 is equivalent to	--debug	abnormal,chat.

       -I file,	--config file
	    Set	configuration file to use.  This option	may not	be  available,
	    depending upon how uux was compiled.

       -v, --version
	    Report version information and exit.

       --help
	    Print a help message and exit.

EXAMPLES
       uux -z -	sys1!rmail user1
       Execute	the  command  ``rmail user1'' on the system sys1, giving it as
       standard	input whatever is given	to uux as standard input.  If a	 fail-
       ure occurs, send	a message using	mail (1).

       uux 'diff -c sys1!~user1/file1 sys2!~user2/file2	>!file.diff'
       Fetch  the two named files from system sys1 and system sys2 and execute
       diff putting the	result in file.diff in	the  current  directory.   The
       current	directory must be writable by the uuxqt	(8) daemon for this to
       work.

       uux 'sys1!uucp ~user1/file1 (sys2!~user2/file2)'
       Execute uucp on the system sys1 copying file1 (on system	sys1) to sys2.
       This illustrates	the use	of parentheses for quoting.

RESTRICTIONS
       The remote system may not permit	you to execute certain commands.  Many
       remote systems only permit the execution	of rmail and rnews.

       Some of the options are dependent on the	capabilities of	the uuxqt  (8)
       daemon on the remote system.

FILES
       The  file names may be changed at compilation time or by	the configura-
       tion file, so these are only approximations.

       /etc/uucp/config	- Configuration	file.
       /etc/uucp/oldconfig/ - Alternative configuration	(HDB or	V2 format)
       /var/spool/uucp - UUCP spool directory.
       /var/log/uucp/Log - UUCP	log file.
       /var/spool/uucppublic - Default UUCP public directory.

SEE ALSO
       mail(1),	uustat(1), uucp(1), uucico(8), uuxqt(8)

BUGS
       Files can not be	referenced across multiple systems.

       Too many	jobids are output by --jobid, and there	is no good way to can-
       cel a local execution requiring remote files.

AUTHOR
       Ian Lance Taylor	(ian@airs.com)

			       Taylor UUCP 1.06				uux(1)

NAME | SYNOPSIS | DESCRIPTION | OPTIONS | EXAMPLES | RESTRICTIONS | FILES | SEE ALSO | BUGS | AUTHOR

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=uux&sektion=1&manpath=Red+Hat+9>

home | help