Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
uucico(1M)		System Administration Commands		    uucico(1M)

NAME
       uucico -	file transport program for the uucp system

SYNOPSIS
       /usr/lib/uucp/uucico [-f] [-c type] [-d spool-directory]	[-i interface]
       [-r role-number]	[-s system-name] [-x debug-level]

DESCRIPTION
       uucico is the file transport program for	uucp work file transfers.

OPTIONS
       The following options are supported:

       -f		       This option is used to "force execution"	of uu-
			       cico  by	ignoring the limit on the maximum num-
			       ber of uucicos defined in the  /etc/uucp/Limits
			       file.

       -c type		       The  first  field  in  the  Devices file	is the
			       "Type" field.  The -c option forces  uucico  to
			       only use	entries	in the "Type" field that match
			       the user	specified type.	The specified type  is
			       usually the name	of a local area	network.

       -d spool-directory      This  option  specifies the directory spool-di-
			       rectory that contains the uucp work files to be
			       transferred.   The  default  spool directory is
			       /var/spool/uucp.

       -i interface	       This option defines the interface used with uu-
			       cico.  The  interface  only affects slave mode.
			       Known interfaces	are UNIX (default), TLI	(basic
			       Transport Layer Interface), and TLIS (Transport
			       Layer   Interface   with	   Streams    modules,
			       read/write).

       -r role-number	       The  role-number	 1  is	used  for master mode.
			       role-number 0 is	used for slave mode (default).
			       When  uucico  is	 started by a program or cron,
			       role-number 1 should be used for	master mode.

       -s system-name	       The -s option defines the remote	 system	 (sys-
			       tem-name)  that uucico will try to contact.  It
			       is required when	the role  is  master;  system-
			       name must be defined in the Systems file.

       -x debug-level	       Both  uux  and  uucp  queue  jobs  that will be
			       transferred by uucico. These jobs are  normally
			       started by the uusched scheduler, for debugging
			       purposes, and can be started manually. For  ex-
			       ample,  the  shell Uutry	starts uucico with de-
			       bugging turned on. The debug-level is a	number
			       between 0 and 9.	 Higher	numbers	give more  de-
			       tailed debugging	information.

FILES
       /etc/uucp/Devconfig

       /etc/uucp/Devices

       /etc/uucp/Limits

       /etc/uucp/Permissions

       /etc/uucp/Sysfiles

       /etc/uucp/Systems

       /var/spool/locks/*

       /var/spool/uucp/*

       /var/spool/uucppublic/*

ATTRIBUTES
       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE	TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWbnuu			   |
       +-----------------------------+-----------------------------+

SEE ALSO
       uucp(1C), uustat(1C), uux(1C), Uutry(1M),  cron(1M),  uusched(1M),  at-
       tributes(5)

SunOS 5.10			  19 May 1993			    uucico(1M)

NAME | SYNOPSIS | DESCRIPTION | OPTIONS | FILES | ATTRIBUTES | SEE ALSO

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=uucico&sektion=1m&manpath=SunOS+5.10>

home | help