Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
utftpd(8)		    System Manager's Manual		     utftpd(8)

NAME
       utftpd -	a trivial file transfer	protocol (TFTP)	server

SYNOPSIS
       utftp [options] [dirs]

DESCRIPTION
       utftpd  sends and receives files	with the TFTP protocol.	It is normally
       started from inetd.

       TFTP doesn't support authentication, so the only	 way  to  authenticate
       TFTP clients is by using	IP addresses.

       traditional TFTP	access control
	      In traditional mode utftpd will allow access to files in all di-
	      rectories	(and subdirectories of those) named  one  the  command
	      line.  Read  access  will	 be  allowed for all publicly readable
	      files and	write access to	already	existing and publicy  writable
	      files.  Unlike other TFTP	servers	utftpd will deny all access if
	      no directories have been specified on the	command	line.  If  you
	      wish  to	sacrifice  all security	you can	still specify a	single
	      slash character.

       traditional mode	access control summary
	      This means that every host which can talk	to the TFTP server can
	      read and write all those files, and of course every user on that
	      hosts can	do that, too. Therefore	you should protect those  TFTP
	      servers with tcpd	or a packet filter.

	      There  is	 no  client-specific  access control in	this mode: all
	      clients get the same rights.

       relative	filenames in traditional mode
	      are allowed for read accesses only. If utftpd  sees  a  relative
	      file name	it qualifies it	with a eventual	value of the --global-
	      chdir option, if any, and	then tries to find the file in any  of
	      the  directories	named on the command line. It will stop	at the
	      first file. If that happens to be	unreadable it  will  deny  ac-
	      cess.

       extended	access control
	      utftpd also offers a more	elaborate access control scheme, which
	      will be used if the --config-file	option is given, and which al-
	      lows  to	assign	rights	to  read, create or overwrite files or
	      files in directories for every single  client.  It  also	allows
	      version control.

	      Details  may be found in in the utftpd.conf and utftpd_make man-
	      ual pages.

OPTIONS
       -c, --config-file FILE
	      Use FILE as configuration	file. This has to be  a	 cdb  database
	      file.  See  the utftpd_make manual page for how to generate this
	      file, and	the utftpd.conf.5 manual page more  information	 about
	      the input	file format of utftpd_make.  This file may reside out-
	      side the chroot()ed area (this also means	the filename should be
	      relative to the real root	directory).

	      If  this	option	is  missing utftpd will	fall back to old style
	      compatibility, see above.

       -C, --global-chroot DIR
	      utftpd shall change its working directory	to DIR,	and invoke ch-
	      root(".")	  magic	 after that. This will be done before the con-
	      figuration file is read.

       -d, --global-chdir DIR
	      utftpd shall change its working directory	to DIR.	This  is  done
	      after a global chroot (see the -C	option above).

       -u, --global-uid	NAME_OR_NUMBER
	      utftpd  shall change its user ID to NAME_OR_NUMBER, which	may be
	      a	number or a name. In case of a name it will be resolved	at the
	      start  of	utftpd.	The change to the new user id will be done af-
	      ter a possible global chroot.

	      You may specify a	group as well: Use  the	 USER.GROUP  form  for
	      that (or leave out the USER to change only the group).

       -v, --verbose
	      Be verbose (to syslog).

       In case i screwed something up: short options use the same arguments as
       the long	ones

ORDER
       utftpd will, upon startup, in that order:

       receive the first packet	from remote (it	needs the address of the peer,
       to  find	his data in the	configuration file). [just for the records: it
       can't use MSG_PEEK here because that would make inetd dance wild. Uah.]
       This needs to be	done here and now simply because this packet has to be
       read, else awful	things happen if utftpd	 exits	before	it  reads  the
       first packet.

       open a syslog connection

       open  the  configuration	 file, so it may reside	outside	the chrooted()
       area (see the --config-file option). This step is not  done  in	tradi-
       tional mode.

       resolve user / group names from a --global-uid option.

       chdir and then chroot to	the --global-chroot directory, if given.

       change user/group IDs to	the --global-uid values, if any.

       chdir to	the --global-chdir directory, if given.

       read  the configuration file see	the --config-file option. This step is
       only done if a configuration file has been given	on the command line.

       close the configuration file This step is only done if a	 configuration
       file has	been given on the command line.

       go to daemon mode: fork itself in the background

VERSION	CONTROL
       utftpd knows about version control. If it's activated in	the configura-
       tion file and the requested file	has been  put  under  version  control
       (which you have to do yourself) then utftpd will

       on  GET	requests  (RRQ)	 try to	check out the latest revision and send
       that. It	will never care	 about	checked	 out  copies  it  finds	 lying
       around.

       on  PUT	requests (WRQ) out an editable copy, receive the file and then
       check them in. It will deny access if the checkout fails.  This	behav-
       iour  allows  you  to  manually	check out a file, edit it, check it in
       again, without having to	fear that utftpd overwrites the	file  you  are
       editing,	 and is	also the right way to not open a race condition	(think
       of two clients wanting to write the  same  file,	 although  this	 is  a
       stupid thing to do anyway).

       SCCS is preferred over RCS.

       It's  a	usually	 not  a	bright idea to put binary files	under revision
       control:	VC systems tend	to dislike them. Some implementations  may  be
       ok, so GNU RCS seems to work find, provided it also has GNU diff	avail-
       able.

       Version control support is not available	in traditional access  control
       mode.

SEE ALSO
       utftpd_make(8), utftpd.conf(5), RFC 1350, RFC 2348, RFC 2349.

								     utftpd(8)

NAME | SYNOPSIS | DESCRIPTION | OPTIONS | ORDER | VERSION CONTROL | SEE ALSO

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=utftpd&sektion=8&manpath=FreeBSD+12.2-RELEASE+and+Ports>

home | help