Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
USLCOM(4)	       FreeBSD Kernel Interfaces Manual		     USLCOM(4)

NAME
     uslcom -- Silicon Laboratories CP210x based USB serial adapter

SYNOPSIS
     uslcom* at	uhub?
     ucom* at uslcom?

DESCRIPTION
     The uslcom	driver supports	Silicon	Laboratories
     CP2101/CP2102/CP2103/CP2104/CP2105	based serial adapters.

     The CP2101/CP2102/CP2103 devices only support a variety of	baud rates up
     to	921600.	 CP2104	and CP2105 devices support any baud rate up to 2 Mbps.

     The following devices should work with the	uslcom driver:

	   Aerocomm Radio
	   Argussoft ISP
	   Aruba Networks USB-to-UART
	   Baltech card	reader
	   Burnside Telecom Desktop Mobile
	   chip45.com Crumb128 module
	   Clipsal 5500PCU C-Bus
	   Dynastream ANT2USB
	   Elan	Digital	Systems	USBscope50
	   Elan	Digital	Systems	USBwave12
	   Elan	Digital	Systems	USBpulse100
	   Elan	Digital	Systems	USBcount50
	   Enfora EDG1228
	   Gemalto Prox-PU/CU Smartcard	Readers
	   IRZ MC35pu GSM Terminal
	   Jablotron PC-60B
	   Juniper SRX 300/320/340/345/550M/1500 USB console
	   Lipowsky Baby-JTAG
	   Lipowsky Baby-LIN
	   Lipowsky HARP-1
	   MobiData GPRS Modem
	   Pololu USB to Serial
	   Ruckus ICX 7150 USB console
	   SPORTident BSM7-D-USB
	   Tracient RFID
	   Track Systems Traqmate
	   West	Mountain Radio RIGblaster P&P
	   West	Mountain Radio RIGtalk

SEE ALSO
     tty(4), ucom(4), uhub(4), usb(4)

HISTORY
     The uslcom	device driver first appeared in	OpenBSD	4.0.

AUTHORS
     The uslcom	driver was written by Jonathan Gray <jsg@openbsd.org>.

FreeBSD	13.0			April 26, 2019			  FreeBSD 13.0

NAME | SYNOPSIS | DESCRIPTION | SEE ALSO | HISTORY | AUTHORS

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=uslcom&sektion=4&manpath=OpenBSD+6.9>

home | help