Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
USCANNER(4)	       FreeBSD Kernel Interfaces Manual		   USCANNER(4)

NAME
     uscanner -- USB Scanners

SYNOPSIS
     To	compile	this driver into the kernel, place the following line in your
     kernel configuration file:

	   device uscanner

     Alternatively, to load the	driver as a module at boot time, place the
     following line in loader.conf(5):

	   uscanner_load="YES"

DESCRIPTION
     The uscanner driver provides support for scanners that attach to the USB
     port.  For	each scanner attached it will provide an entry like
     /dev/uscanner0 in /dev.  User-space programs, e.g.	SANE, can in turn use
     the device	entry throgh a suitable	backend	driver (see
     ports/graphics/sane-backends) to control the scanner itself.

     In	case of	multifunction USB devices (e.g.	scanner/printer/card reader),
     this driver only attaches to the USB interface that controls the scanner;
     for the other USB interface you need separate drivers, e.g.  ulpt,	umass,
     and so on.

     usb and one of uhci or ohci must be configured in the kernel as well.

HARDWARE
     Because there is no standard device class for USB scanners, this driver
     will only recognise devices whose USB IDs are explicitly listed in	the
     table in the driver itself.

     The following devices are supported to date:

     +o	 Acer Acerscan:	320U, 620U, 640U, 640BT, 1240U,	C310U;
     +o	 AGFA SnapScan:	1212U, 1236U, e20, e25,	e26, e40, e50, e52, SnapScan
	 Touch;
     +o	 Avision 1200U
     +o	 Canon CanoScan: D660U,	N656U, N676U, N1220U, LIDE 20, LIDE 25,	LIDE
	 30;
     +o	 Epson Perfection: 610,	636U / 636Photo, 640U, 1200U / 1200Photo,
	 1240U / 1240Photo, 1250, 1260,	1270, 1600, 1640SU, 1650, 1660,	1670,
	 2480, 3200, 3500, 3590, 4200, 4990;
     +o	 Epson:	GT-8400UF, GT-9300UF, GT-9700F;
     +o	 Epson Stylus: Photo RX425, CX3650, DX-5000, DX-5050, DX-6000, DX-6050
	 (and possibly more in the CX-5000 and DX-3800..DX-7000	family);
     +o	 Hewlett Packard: Photosmart S20
     +o	 Hewlett Packard Scanjet: 2200C, 3300C,	3400CSE, 4100C,	4200C, 4300C,
	 5200C,	5300C, 5400C, 6200C, 6300C, 8200C, 8250C, 8290C;
     +o	 KYE ColorPage Vivid-Pro
     +o	 Microtek Phantom: 336CX, C6;
     +o	 Microtek ScanMaker: V6UL V6USL, X6U;
     +o	 Minolta 5400
     +o	 Mustek: 600 CU, 1200 CU, 1200 UB, 1200	USB;
     +o	 Mustek	BearPaw: 1200F,	1200TA;
     +o	 NatSemi BearPaw 1200
     +o	 Nikon CoolScan	LS40 ED
     +o	 Primax	6200
     +o	 Primax	Colorado: 1200u, 600u, USB 19200, USB 9600;
     +o	 Primax: G2-200, G2-300, G2-600, G2600,	G2E-300, G2E-3002, G2E-600,
	 G2E600, G2X-300, G600,	ReadyScan 636i;
     +o	 Ultima	1200 UB	Plus
     +o	 UMAX Astra: 1220U, 1236U, 2000U, 2100U, 2200U,	3400;
     +o	 Visioneer OneTouch: 3000, 5300, 7600, 6100, 6200, 8100, 8600;

SEE ALSO
     ohci(4), uhci(4), usb(4)

AUTHORS
     The uscanner driver was written by	Nick Hibma <n_hibma@FreeBSD.org>.

     This manual page was written by Jeroen Ruigrok van	der Werven
     <asmodai@FreeBSD.org>.

FreeBSD	7.2			October	5, 2007			   FreeBSD 7.2

NAME | SYNOPSIS | DESCRIPTION | HARDWARE | SEE ALSO | AUTHORS

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=uscanner&sektion=4&manpath=FreeBSD+7.2-RELEASE>

home | help