Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
UPSRW(8)			  NUT Manual			      UPSRW(8)

NAME
       upsrw - UPS variable administration tool

SYNOPSIS
       upsrw ups

       upsrw -h

       upsrw -s	variable [-u username] [-p password] ups

DESCRIPTION
       upsrw allows you	to view	and change the read/write variables inside
       your UPS. It sends commands via the server upsd(8) to your driver,
       which configures	the hardware for you.

       The list	of variables that allow	you to change their values is based on
       the capabilities	of your	UPS equipment. Not all models support this
       feature.	Typically, cheaper hardware does not support any of them. Run
       upsrw with a UPS	identifier to see what will work for you.

OPTIONS
       -h
	   Display the help message.

       -s variable
	   Specify the variable	to be changed inside the UPS. For unattended
	   mode	such as	in shell scripts, use the format VAR=VALUE to specify
	   both	the variable and the value, for	example:

	       -s input.transfer.high=129

	   Without this	argument, upsrw	will just display the list of the
	   variables and their possible	values.

	   Some	variables are strings, and can be set to any value within the
	   length limit. Others	are enumerated types and can only be set to
	   one of those	values.	Others may be within an	allowed	range of
	   values. Refer to the	list to	know what's available in your
	   hardware.

       -u username
	   Set the NUT username	for the	connection to the server. This is
	   optional, and you will be prompted for this when using the -s
	   option if you don't specify -u on the command line. NUT usernames
	   are defined in upsd.users(5), and are not linked to system
	   usernames.

       -p password
	   Set the password to authenticate to the server. This	is also
	   optional like -u, and you will be prompted for it if	necessary.

       ups
	   View	or change the settings on this UPS. The	format for this	option
	   is upsname[@hostname[:port]]. The default hostname is "localhost".

UNATTENDED MODE
       If you run this program inside a	shell script or	similar	to set
       variables, you will need	to specify all of the information on the
       command line. This means	using -s VAR=VALUE, -u and -p. Otherwise it
       will put	up a prompt and	your program will hang.

       This is not necessary when displaying the list, as the username and
       password	are not	required for read-only mode.

       Moreover, if you	run this program inside	a shell	script or similar, you
       should only consider using output from stdout, not stderr.

DIAGNOSTICS
       upsrw can't set variables on your UPS unless you	provide	a valid
       username	and password. If you get "access denied" errors, make sure
       that your upsd.users(5) has an entry for	you, and that the username you
       are using has permissions to SET	variables.

VALUE FORMAT
       When using upsrw	to modify a numeric float value, that values must be
       given using decimal (base 10) english-based representation, so using a
       dot, in non-scientific notation.	So hexadecimal,	exponents, and comma
       for thousands separator are forbiden. For example: "1200.20" is valid,
       while "1,200.20"	and "1200,20" are invalid.

HISTORY
       This program used to be called upsct2, which was	ambiguous and
       confusing.

SEE ALSO
       upsd(8),	upscmd(8)

   Internet resources:
       The NUT (Network	UPS Tools) home	page: http://www.networkupstools.org/

Network	UPS Tools 2.7.3.	  03/09/2016			      UPSRW(8)

NAME | SYNOPSIS | DESCRIPTION | OPTIONS | UNATTENDED MODE | DIAGNOSTICS | VALUE FORMAT | HISTORY | SEE ALSO

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=upsrw&sektion=8&manpath=FreeBSD+12.0-RELEASE+and+Ports>

home | help