Skip site navigation (1)Skip section navigation (2)

FreeBSD Man Pages

Man Page or Keyword Search:
Man Architecture
Apropos Keyword Search (all sections) Output format
home | help
UPLCOM(4)              FreeBSD Kernel Interfaces Manual              UPLCOM(4)

NAME
     uplcom - USB support for Prolific PL-2303/2303X/2303HX serial adapters
     driver

SYNOPSIS
     To compile this driver into the kernel, place the following lines in your
     kernel configuration file:

           device uplcom
           device ucom

     Alternatively, to load the driver as a module at boot time, place the
     following line in loader.conf(5):

           uplcom_load="YES"

DESCRIPTION
     The uplcom driver provides support for various serial adapters based on
     the Prolific PL-2303, PL-2303X and PL-2303HX USB-to-RS232 Bridge chips.

     The device is accessed through the ucom(4) driver which makes it behave
     like a tty(4).

HARDWARE
     The uplcom driver supports the following adapters:

     +o   ATEN UC-232A
     +o   BAFO BF-800
     +o   BAFO BF-810
     +o   Belkin F5U257
     +o   ELECOM UC-SGT
     +o   HAL Corporation Crossam2+USB IR commander
     +o   Hama USB RS-232 Serial Adapter
     +o   Hamlet exagerate XURS232
     +o   IOGEAR UC-232A
     +o   I/O DATA USB-RSAQ
     +o   I/O DATA USB-RSAQ2
     +o   I/O DATA USB-RSAQ3
     +o   Mobile Action MA-620 Infrared Adapter
     +o   PLANEX USB-RS232 URS-03
     +o   RATOC REX-USB60
     +o   Radio Shack USB Serial Cable
     +o   Sandberg USB to Serial Link (model number 133-08)
     +o   SOURCENEXT KeikaiDenwa 8 (with and without charger)
     +o   Sony Ericsson USB Cable (Susteen USB Data Cable)
     +o   Willcom W-SIM DD PHS terminal.(WS002IN)

SEE ALSO
     tty(4), ucom(4), usb(4)

HISTORY
     The uplcom driver appeared in NetBSD 1.6.  This manual page was adopted
     from NetBSD by Tom Rhodes <trhodes@FreeBSD.org> in April 2002.

FreeBSD 11.0-PRERELEASE        November 22, 2006       FreeBSD 11.0-PRERELEASE

NAME | SYNOPSIS | DESCRIPTION | HARDWARE | SEE ALSO | HISTORY

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=uplcom&sektion=4&manpath=FreeBSD+8.1-RELEASE>

home | help