FreeBSD Manual Pages
sccs-unget(1) User Commands sccs-unget(1) NAME sccs-unget, unget - undo a previous get of an SCCS file SYNOPSIS /usr/ccs/bin/unget [-ns] [-q[nsedelim]] [-rsid] [-Nbulk-spec] s.filename... DESCRIPTION The unget utility undoes the effect of a get -e command executed before the creation of the pending delta. If a directory name is used in place of the s.filename argument, the unget command applies to all s.files in that directory. Unreadable s.files produce an error; processing continues with the next file (if any). The use of `-' as the s.filename argument indicates that the names of files are to be read from the standard input, one s.file per line. OPTIONS The following options are supported: -n Retains the retrieved version, which is otherwise removed. -s Suppress display of the SCCS delta ID (SID). -rsid When multiple versions are checked out, this option specifies which pending delta to abort. A diagnostic results if the speci- fied SID is ambiguous, or if it is necessary but omitted from the command line. -q[nsedelim] Enable NSE mode. If NSE mode is enabled, several NSE related extensions may be used. In this release, the value of nsedelim is ignored. This option is an undocumented SUN extension that does not exist in historic sccs implementations. -Nbulk-spec Processes a bulk of SCCS history files. This option allows to do an efficient mass processing of SCCS history files. The bulk-spec parameter is composed from an optional list of flag parameters followed by an optional path specifier. The following flag types are supported: ++ If bulk-spec is preceded by a `++', unget(1) expects to process filenames that are prepended by a plus sign, the related SID and another plus sign following the form: +sid+filename This permits each file to be retrieved with an indi- vidual SID. space This is a placeholder dummy flag that allows to use a prepared string for the -N option and to replace the space character by one of the supported flags on de- mand. The following path specifier types are supported: -N The file name parameters to the unget command are not s.filename files but the names of the g-files. The s.filename names are automatically derived from the g- file names by prepending s. to the last path name component. Both, s.filename and the g-file are in the same directory. -Ns. The file name parameters to the unget command are s.filename files. The the g-files names are automati- cally derived by removing s. from the beginning of last path name component of the s.filename. Both, s.filename and the g-file are in the same directory. -Ndir The file name parameters to the unget command are not s.filename files but the names of the g-files. The s.filename names are put into directory dir, the names are automatically derived from the g-file names by prepending dir/s. to the last path name component. -Ndir/s. The file name parameters to the unget command are s.filename files in directory dir. The the g-files names are automatically derived by removing dir/s. from the beginning of last path name component of the s.filename. A typical value for dir is SCCS. In order to overcome the limited number of exec(2) arguments, it is recommended to use `-' as the file name parameter for unget(1) and to send a list of path names to stdin. This option is a SCHILY extension that does not exist in his- toric sccs implementations. -Xextended-options Specify extended options. The argument extended-options may be a comma separated list of extended option names. The following extended options are supported, they may be abbre- viated as long ad the abbreviation is still unique. Options with parameter may not be abbreviated. 0 When reading filenames from stdin, triggered by a file name argument `-', the filename separator is a null byte instead of a newline. This allows to use long lists with arbitrary filenames. help Print a short online help for available options. The -X option is a SCHILY extension that does not exist in his- toric sccs implementations. -V -version --version Prints the unget version number string and exists. This option is a SCHILY extension that does not exist in his- toric sccs implementations. ENVIRONMENT VARIABLES See environ(5) for descriptions of the following environment variables that affect the execution of unget(1): LANG, LC_ALL, LC_CTYPE, LC_MES- SAGES, and NLSPATH. SCCS_NO_HELP If set, unget(1) will not automatically call help(1) with the SCCS error code in order to print a more helpful error message. Scripts that depend on the exact error messages of SCCS commands should set the environment variable SCCS_NO_HELP and set LC_ALL=C. EXIT STATUS The following exit values are returned: 0 Successful completion. 1 An error occurred. FILES p.file permissions (lock) file for checked-out versions. See sccs- get(1) for a description of the layout of the p.file. q.file temporary copy of the p.file; renamed to the p.file after com- pletion z.file temporary lock file contains the binary process id in host byte order followed by the host name dump.core If the file dump.core exists in the current directory and a fa- tal signal is received, a coredump is initiated via abort(3). ATTRIBUTES See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Availability |SUNWsprot | +-----------------------------+-----------------------------+ |Interface Stability |Standard | +-----------------------------+-----------------------------+ SEE ALSO sccs(1), sccs-add(1), sccs-admin(1), sccs-branch(1), sccs-cdc(1), sccs-check(1), sccs-clean(1), sccs-comb(1), sccs-commit(1), sccs-create(1), sccs-cvt(1), sccs-deledit(1), sccs-delget(1), sccs-delta(1), sccs-diffs(1), sccs-edit(1), sccs-editor(1), sccs-enter(1), sccs-fix(1), sccs-get(1), sccs-help(1), sccs-histfile(1), sccs-info(1), sccs-init(1), sccs-istext(1), sccs-ldiffs(1), sccs-log(1), sccs-print(1), sccs-prs(1), sccs-prt(1), sccs-rcs2sccs(1), sccs-remove(1), sccs-rename(1), sccs-rmdel(1), sccs-root(1), sccs-sact(1), sccs-sccsdiff(1), sccs-status(1), sccs-tell(1), sccs-unedit(1), sccs-val(1), bdiff(1), diff(1), what(1), sccschangeset(4), sccsfile(4), attributes(5), environ(5), standards(5). DIAGNOSTICS Use the SCCS help command for explanations (see sccs-help(1)). AUTHORS The SCCS suite was originally written by Marc J. Rochkind at Bell Labs in 1972. Release 4.0 of SCCS, introducing new versions of the programs admin(1), get(1), prt(1), and delta(1) was published on February 18, 1977; it introduced the new text based SCCS v4 history file format (previous SCCS releases used a binary history file format). The SCCS suite was later maintained by various people at AT&T and Sun Microsys- tems. Since 2006, the SCCS suite is maintained by Joerg Schilling. SOURCE DOWNLOAD A frequently updated source code for the SCCS suite is included in the schilytools project and may be retrieved from the schilytools project at Sourceforge at: http://sourceforge.net/projects/schilytools/ The download directory is: http://sourceforge.net/projects/schilytools/files/ Check for the schily-*.tar.bz2 archives. Less frequently updated source code for the SCCS suite is at: http://sourceforge.net/projects/sccs/files/ Separate project informations for the SCCS project may be retrieved from: http://sccs.sf.net SunOS 5.11 2020/08/05 sccs-unget(1)
NAME | SYNOPSIS | DESCRIPTION | OPTIONS | ENVIRONMENT VARIABLES | EXIT STATUS | FILES | ATTRIBUTES | SEE ALSO | DIAGNOSTICS | AUTHORS | SOURCE DOWNLOAD
Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=unget&sektion=1&manpath=FreeBSD+13.0-RELEASE+and+Ports>