Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
UBSA(4)		       FreeBSD Kernel Interfaces Manual		       UBSA(4)

NAME
     ubsa -- USB support for Belkin serial adapters

SYNOPSIS
     To	compile	this driver into the kernel, place the following lines in your
     kernel configuration file:

	   device usb
	   device ucom
	   device ubsa

     Alternatively, to load the	driver as a module at boot time, place the
     following line in loader.conf(5):

	   ubsa_load="YES"

DESCRIPTION
     The ubsa driver provides support for the USB-to-RS232 Bridge chip used by
     a variety of serial adapters from Belkin and other	vendors.

     The device	is accessed through the	ucom(4)	driver which makes it behave
     like a tty(4).

HARDWARE
     The ubsa driver supports the following adapters:

     +o	 AnyData ADU-500A EV-DO	modem
     +o	 AnyData ADU-E100A (no EV-DO mode support)
     +o	 Belkin	F5U103
     +o	 Belkin	F5U120
     +o	 e-Tek Labs Kwik232
     +o	 GoHubs	GoCOM232
     +o	 Peracom single	port serial adapter

FILES
     /dev/ttyU*	      for callin ports
     /dev/ttyU*.init
     /dev/ttyU*.lock  corresponding callin initial-state and lock-state
		      devices

     /dev/cuaU*	      for callout ports
     /dev/cuaU*.init
     /dev/cuaU*.lock  corresponding callout initial-state and lock-state
		      devices

SEE ALSO
     tty(4), ucom(4), usb(4)

HISTORY
     The ubsa driver appeared in FreeBSD 5.0.  The uplcom(4) manual page was
     adopted from NetBSD by Tom	Rhodes <trhodes@FreeBSD.org> in	April 2002 and
     modified for the ubsa driver by Alexander Kabaev <kan@FreeBSD.org>	in
     October 2002.

AUTHORS
     The ubsa driver was written by Alexander Kabaev <kan@FreeBSD.org>.

FreeBSD	Ports 11.2		April 26, 2017		    FreeBSD Ports 11.2

NAME | SYNOPSIS | DESCRIPTION | HARDWARE | FILES | SEE ALSO | HISTORY | AUTHORS

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=ubsa&sektion=4&manpath=FreeBSD+12.0-RELEASE+and+Ports>

home | help