Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
tpm2_nvreadpublic(1)	    General Commands Manual	  tpm2_nvreadpublic(1)

NAME
       tpm2_nvreadpublic(1) - Display all defined Non-Volatile (NV)s indices.

SYNOPSIS
       tpm2_nvreadpublic [OPTIONS]

DESCRIPTION
       tpm2_nvreadpublic(1)  -	Display	all defined Non-Volatile (NV)s indices
       to stdout in a YAML format.

       Display metadata	for all	defined	NV indices.  Metadata includes:

       o The size of the defined region.

       o The hash algorithm used to compute the	name of	the index.

       o The auth policy.

       o The NV	attributes as defined in section "NV Attributes".

   Example Output
       ``` 0x1500015: hash algorithm: friendly:	sha256 value: 0xB  attributes:
       friendly:  ownerwrite|ownerread value: 0x2000200	size: 32 authorization
       policy:

       0x1500017: hash algorithm:  friendly:  sha256  value:  0xB  attributes:
       friendly:  ownerwrite|ownerread value: 0x2000200	size: 32 authorization
       policy: ```

OPTIONS
       This tool takes no tool specific	options.

COMMON OPTIONS
       This collection of options are common to	many programs and provide  in-
       formation that many users may expect.

       o -h,  --help=[man|no-man]:  Display the	tools manpage.	By default, it
	 attempts to invoke the	manpager for the  tool,	 however,  on  failure
	 will  output  a short tool summary.  This is the same behavior	if the
	 "man" option argument is specified, however if	explicit "man" is  re-
	 quested,  the	tool  will  provide errors from	man on stderr.	If the
	 "no-man" option if specified, or the manpager fails,  the  short  op-
	 tions will be output to stdout.

	 To  successfully use the manpages feature requires the	manpages to be
	 installed or on MANPATH, See man(1) for more details.

       o -v, --version:	Display	version	information for	this  tool,  supported
	 tctis and exit.

       o -V,  --verbose:  Increase the information that	the tool prints	to the
	 console during	its execution.	When using this	option	the  file  and
	 line number are printed.

       o -Q, --quiet: Silence normal tool output to stdout.

       o -Z, --enable-errata: Enable the application of	errata fixups.	Useful
	 if an errata fixup needs to be	applied	to commands sent to  the  TPM.
	 Defining the environment TPM2TOOLS_ENABLE_ERRATA is equivalent.

TCTI Configuration
       The  TCTI  or  "Transmission  Interface"	is the communication mechanism
       with the	TPM.  TCTIs can	be changed for communication with TPMs	across
       different mediums.

       To control the TCTI, the	tools respect:

       1. The command line option -T or	--tcti

       2. The environment variable: TPM2TOOLS_TCTI.

       Note:  The  command  line option	always overrides the environment vari-
       able.

       The current known TCTIs are:

       o tabrmd	    -	  The	  resource     manager,	    called	tabrmd
	 (https://github.com/tpm2-software/tpm2-abrmd).	  Note that tabrmd and
	 abrmd as a tcti name are synonymous.

       o mssim - Typically used	for communicating to the TPM software  simula-
	 tor.

       o device	- Used when talking directly to	a TPM device file.

       o none  - Do not	initalize a connection with the	TPM.  Some tools allow
	 for off-tpm options and thus support not using	a TCTI.	 Tools that do
	 not  support  it  will	error when attempted to	be used	without	a TCTI
	 connection.  Does not support ANY options and MUST  BE	 presented  as
	 the exact text	of "none".

       The  arguments  to  either  the	command	line option or the environment
       variable	are in the form:

       <tcti-name>:<tcti-option-config>

       Specifying an empty string for  either  the  <tcti-name>	 or  <tcti-op-
       tion-config> results in the default being used for that portion respec-
       tively.

   TCTI	Defaults
       When a TCTI is not specified, the default TCTI is  searched  for	 using
       dlopen(3)  semantics.   The  tools  will	 search	for tabrmd, device and
       mssim TCTIs IN THAT ORDER and USE THE FIRST ONE FOUND.  You  can	 query
       what TCTI will be chosen	as the default by using	the -v option to print
       the version information.	 The "default-tcti" key-value pair will	 indi-
       cate which of the aforementioned	TCTIs is the default.

   Custom TCTIs
       Any TCTI	that implements	the dynamic TCTI interface can be loaded.  The
       tools internally	use dlopen(3), and the raw tcti-name value is used for
       the lookup.  Thus, this could be	a path to the shared library, or a li-
       brary name as understood	by dlopen(3) semantics.

TCTI OPTIONS
       This collection of options are used to configure	the various known TCTI
       modules available:

       o device: For the device	TCTI, the TPM character	device file for	use by
	 the device TCTI can be	specified.  The	default	is /dev/tpm0.

	 Example:   -T	 device:/dev/tpm0   or	 export	   TPM2TOOLS_TCTI="de-
	 vice:/dev/tpm0"

       _o mssim:	 For  the  mssim  TCTI,	the domain name	or IP address and port
	 number	used by	the simulator  can  be	specified.   The  default  are
	 127.0.0.1 and 2321.

	 Example:  -T  mssim:host=localhost,port=2321  or export TPM2TOOLS_TC-
	 TI="mssim:host=localhost,port=2321"

       _o abrmd:	For the	abrmd TCTI, the	configuration string format is	a  se-
	 ries  of  simple  key value pairs separated by	a ',' character.  Each
	 key and value string are separated by a '=' character.

	 o TCTI	abrmd supports two keys:

	   1. 'bus_name' : The name of	the  tabrmd  service  on  the  bus  (a
	      string).

	   2. 'bus_type' : The type of the dbus	instance (a string) limited to
	      'session'	and 'system'.

	 Specify the tabrmd tcti name and a config string of  bus_name=com.ex-
	 ample.FooBar:

	 \--tcti=tabrmd:bus_name=com.example.FooBar

	 Specify the default (abrmd) tcti and a	config string of bus_type=ses-
	 sion:

	 \--tcti:bus_type=session

	 NOTE: abrmd and tabrmd	are synonymous.

NV Attributes
       NV Attributes are used to control various properties of the NV  defined
       space.	When  specified	 as an option, either the raw bitfield mask or
       "nice-names" may	be used.  The values can be found in Table 204 Part  2
       of the TPM2.0 specification, which can be found here:

       <https://trustedcomputinggroup.org/wp-content/uploads/TPM-
       Rev-2.0-Part-2-Structures-01.38.pdf>

       Nice names are calculated by taking the name field of table 204 and re-
       moving  the  prefix  TPMA_NV_  and  lowercasing	the result.  Thus, TP-
       MA_NV_PPWRITE becomes ppwrite.  Nice names can be joined	using the bit-
       wise or "|" symbol.

       Note  that the TPM_NT field is 4	bits wide, and thus can	be set via nt=
       format.	 For  instance,	 to  set  The  fields  TPMA_NV_OWNERREAD,  TP-
       MA_NV_OWNERWRITE,  TPMA_NV_POLICYWRITE, and TPMA_NT = 0x2, the argument
       would be:

       ownerread|ownerwrite|policywrite|nt=0x2

       Additionally, the NT field, which denotes the type of the NV index, can
       also  be	 specified  via	friendly names:	* ordinary - Ordinary contains
       data that is opaque  to	the  TPM  that	can  only  be  modified	 using
       TPM2_NV_Write.	*  counter - Counter contains an 8-octet value that is
       to be used as a counter and can only be modified	with TPM2_NV_Increment
       *  bits - Bit Field contains an 8-octet value to	be used	as a bit field
       and can only be modified	with TPM2_NV_SetBits.  * pinfail  -  PIN  Fail
       contains	 an  8-octet  pinCount	that increments	on a PIN authorization
       failure and a pinLimit.	* pinpass - PIN	Pass contains an 8-octet  pin-
       Count that increments on	a PIN authorization success and	a pinLimit.

       For  instance, to set The fields	TPMA_NV_OWNERREAD, TPMA_NV_OWNERWRITE,
       TPMA_NV_POLICYWRITE, and	TPMA_NT	= bits,	the argument would be:

       ownerread|ownerwrite|policywrite|nt=bits

EXAMPLES
   List	the defined NV indices to stdout
	      tpm2_nvreadpublic

Returns
       Tools can return	any of the following codes:

       o 0 - Success.

       o 1 - General non-specific error.

       o 2 - Options handling error.

       o 3 - Authentication error.

       o 4 - TCTI related error.

       o 5 - Non supported scheme.  Applicable to tpm2_testparams.

BUGS
       Github Issues (https://github.com/tpm2-software/tpm2-tools/issues)

HELP
       See the Mailing List (https://lists.01.org/mailman/listinfo/tpm2)

tpm2-tools						  tpm2_nvreadpublic(1)

NAME | SYNOPSIS | DESCRIPTION | OPTIONS | COMMON OPTIONS | TCTI Configuration | TCTI OPTIONS | NV Attributes | EXAMPLES | Returns | BUGS | HELP

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=tpm2_nvreadpublic&sektion=1&manpath=FreeBSD+12.1-RELEASE+and+Ports>

home | help