Skip site navigation (1)Skip section navigation (2)

FreeBSD Man Pages

Man Page or Keyword Search:
Man Architecture
Apropos Keyword Search (all sections) Output format
home | help
TIP(1)                  FreeBSD General Commands Manual                 TIP(1)

NAME
     tip - connect to a remote system

SYNOPSIS
     tip [-nv] [-speed] [system-name]

DESCRIPTION
     The tip utility establishes a full-duplex connection to another machine,
     giving the appearance of being logged in directly on the remote CPU.  It
     goes without saying that you must have a login on the machine (or
     equivalent) to which you wish to connect.

     The options are as follows:

     -n      No escape (disable tilde).

     -v      Set verbose mode.

     If speed is specified, it will override any baudrate specified in the
     system description being used.

     If neither speed nor system-name are specified, system-name will be set
     to the value of the HOST environment variable.

     If speed is specified but system-name is not, system-name will be set to
     a value of ``tip'' with speed appended.  For example, tip -1200 will set
     system-name to ``tip1200''.

     Typed characters are normally transmitted directly to the remote machine
     (which does the echoing as well).  A tilde (`~') appearing as the first
     character of a line is an escape signal; the following are recognized:

     ~^D or ~.
             Drop the connection and exit.  Only the connection is dropped -
             the login session is not terminated.

     ~c [name]
             Change directory to name (no argument implies change to home
             directory).

     ~!      Escape to a shell (exiting the shell will return to tip).

     ~>      Copy file from local to remote.  The tip utility prompts for the
             name of a local file to transmit.

     ~<      Copy file from remote to local.  The tip utility prompts first
             for the name of the file to be sent, then for a command to be
             executed on the remote machine.

     ~p from [to]
             Send a file to a remote UNIX host.  This command causes the
             remote UNIX system to run the following command string, sending
             it the from file:

                   stty -echo; cat > 'to'; stty echo

             If the to file is not specified, the from file name is used.
             This command is actually a UNIX specific version of the ~>
             command.

     ~t from [to]
             Take a file from a remote UNIX host.  As in the ~p command, the
             to file defaults to the from file name if it is not specified.
             The remote host executes the following command string to send the
             file to tip:

                   cat 'from'; echo '' | tr '\012' '\01'

     ~|      Pipe the output from a remote command to a local UNIX process.
             The command string sent to the local UNIX system is processed by
             the shell.

     ~$      Pipe the output from a local UNIX process to the remote host.
             The command string sent to the local UNIX system is processed by
             the shell.

     ~C      Fork a child process on the local system to perform special
             protocols such as XMODEM.  The child program will be run with the
             following arrangement of file descriptors:

                   0 <-> remote tty in
                   1 <-> remote tty out
                   2 <-> local tty stderr

     ~#      Send a BREAK to the remote system.  For systems which do not
             support the necessary ioctl() call, the break is simulated by a
             sequence of line speed changes and DEL characters.

     ~s      Set a variable (see the discussion below).

     ~v      List all variables and their values (if set).

     ~^Z     Stop tip (only available with job control).

     ~^Y     Stop only the ``local side'' of tip (only available with job
             control); the ``remote side'' of tip, the side that displays
             output from the remote host, is left running.

     ~?      Get a summary of the tilde escapes.

     To find the system description, and thus the operating characteristics of
     system-name, tip searches for a system description with a name identical
     to system-name.  The search order is as follows:

           1.   If the environment variable REMOTE does not start with a `/'
                it is assumed to be a system description, and is considered
                first.

           2.   If the environment variable REMOTE begins with a `/' it is
                assumed to be a path to a remote(5) database, and the
                specified database is searched.

           3.   The default remote(5) database, /etc/remote, is searched.

     See remote(5) for full documentation on system descriptions.

     The br capability is used in system descriptions to specify the baud rate
     with which to establish a connection.  If the value specified is not
     suitable, the baud rate to be used may be given on the command line, e.g.
     ``tip -300 mds''.

     When tip establishes a connection, it sends out the connection message
     specified in the cm capability of the system description being used.

     When tip prompts for an argument, for example during setup of a file
     transfer, the line typed may be edited with the standard erase and kill
     characters.  A null line in response to a prompt, or an interrupt, will
     abort the dialogue and return the user to the remote machine.

     The tip utility guards against multiple users connecting to a remote
     system by opening modems and terminal lines with exclusive access, and by
     honoring the locking protocol used by uucico(8) (ports/net/freebsd-uucp).

     During file transfers tip provides a running count of the number of lines
     transferred.  When using the ~> and ~< commands, the eofread and eofwrite
     variables are used to recognize end-of-file when reading, and specify
     end-of-file when writing (see below).  File transfers normally depend on
     hardwareflow or tandem mode for flow control.  If the remote system does
     not support hardwareflow or tandem mode, echocheck may be set to indicate
     that tip should synchronize with the remote system on the echo of each
     transmitted character.

     When tip must dial a phone number to connect to a system, it will print
     various messages indicating its actions.  The tip utility supports a
     variety of auto-call units and modems with the at capability in system
     descriptions.

     Support for Ventel 212+ (ventel), Hayes AT-style (hayes), USRobotics
     Courier (courier), Telebit T3000 (t3000) and Racal-Vadic 831 (vadic)
     units is enabled by default.

     Support for Bizcomp 1031[fw] (biz31[fw]), Bizcomp 1022[fw] (biz22[fw]),
     DEC DF0[23]-AC (df0[23]), DEC DN-11 (dn11) and Racal-Vadic 3451 (v3451)
     units can be added by recompiling tip with the appropriate defines.

     Note that if support for both the Racal-Vadic 831 and 3451 is enabled,
     they are referred to as the v831 and v3451, respectively.  If only one of
     the two is supported, it is referred to as vadic.

   Variables
     The tip utility maintains a set of variables which control its operation.
     Some of these variables are read-only to normal users (root is allowed to
     change anything of interest).  Variables may be displayed and set through
     the ~s escape.  The syntax for variables is patterned after vi(1) and
     Mail(1).  Supplying ``all'' as an argument to the set command displays
     all variables readable by the user.  Alternatively, the user may request
     display of a particular variable by attaching a `?' to the end.  For
     example, ``escape?'' displays the current escape character.

     Variables are numeric, string, character, or boolean values.  Boolean
     variables are set merely by specifying their name; they may be reset by
     prepending a `!' to the name.  Other variable types are set by
     concatenating an `=' and the value.  The entire assignment must not have
     any blanks in it.  A single set command may be used to interrogate as
     well as set a number of variables.  Variables may be initialized at run
     time by placing set commands (without the ~s prefix) in the
     initialization file ~/.tiprc; the -v option additionally causes tip to
     display the sets as they are made.  Certain common variables have
     abbreviations.  The following is a list of common variables, their
     abbreviations, and their default values:

     baudrate
             (num) The baud rate at which the connection was established;
             abbreviated ba.

     beautify
             (bool) Discard unprintable characters when a session is being
             scripted; abbreviated be.

     dialtimeout
             (num) When dialing a phone number, the time (in seconds) to wait
             for a connection to be established; abbreviated dial.

     echocheck
             (bool) Synchronize with the remote host during file transfer by
             waiting for the echo of the last character transmitted; default
             is off.

     eofread
             (str) The set of characters which signify an end-of-transmission
             during a ~< file transfer command; abbreviated eofr.

     eofwrite
             (str) The string sent to indicate end-of-transmission during a ~>
             file transfer command; abbreviated eofw.

     eol     (str) The set of characters which indicate an end-of-line.  The
             tip utility will recognize escape characters only after an end-
             of-line.

     escape  (char) The command prefix (escape) character; abbreviated es;
             default value is `~'.

     exceptions
             (str) The set of characters which should not be discarded due to
             the beautification switch; abbreviated ex; default value is
             ``\t\n\f\b''.

     force   (char) The character used to force literal data transmission;
             abbreviated fo; default value is `^P'.

     framesize
             (num) The amount of data (in bytes) to buffer between file system
             writes when receiving files; abbreviated fr.

     hardwareflow
             (bool) Whether hardware flow control (CRTSCTS) is enabled for the
             connection; abbreviated hf; default value is off.

     host    (str) The name of the host to which you are connected;
             abbreviated ho.

     linedisc
             (num) The line discipline to use; abbreviated ld.

     prompt  (char) The character which indicates an end-of-line on the remote
             host; abbreviated pr; default value is `\n'.  This value is used
             to synchronize during data transfers.  The count of lines
             transferred during a file transfer command is based on receipt of
             this character.

     raise   (bool) Upper case mapping mode; abbreviated ra; default value is
             off.  When this mode is enabled, all lowercase letters will be
             mapped to uppercase by tip for transmission to the remote
             machine.

     raisechar
             (char) The input character used to toggle uppercase mapping mode;
             abbreviated rc; not set by default.

     record  (str) The name of the file in which a session script is recorded;
             abbreviated rec; default value is tip.record.

     script  (bool) Session scripting mode; abbreviated sc; default is off.
             When script is true, tip will record everything transmitted by
             the remote machine in the script record file specified in record.
             If the beautify switch is on, only printable ASCII characters
             will be included in the script file (those characters between 040
             and 0177).  The variable exceptions is used to indicate
             characters which are an exception to the normal beautification
             rules.

     tabexpand
             (bool) Expand tabs to spaces during file transfers; abbreviated
             tab; default value is false.  Each tab is expanded to 8 spaces.

     tandem  (bool) Use XON/XOFF flow control to throttle data from the remote
             host; abbreviated ta.  The default value is true unless the nt
             capability has been specified in /etc/remote, in which case the
             default value is false.

     verbose
             (bool) Verbose mode; abbreviated verb; default is true.  When
             verbose mode is enabled, tip prints messages while dialing, shows
             the current number of lines transferred during a file transfer
             operations, and more.

ENVIRONMENT
     HOME    The home directory to use for the ~c command.

     HOST    The default value for system-name if none is specified via the
             command line.

     PHONES  A path to a phones(5) database.

     REMOTE  A system description, or an absolute path to a remote(5) system
             description database.

     SHELL   The name of the shell to use for the ~! command; default value is
             ``/bin/sh''.

FILES
     ~/.tiprc                    initialization file
     tip.record                  record file
     /etc/phones                 default phones(5) file
     /etc/remote                 global remote(5) database
     /var/log/aculog             line access log
     /var/spool/lock/LCK..*      lock file to avoid conflicts with uucp(1)
                                 (ports/net/freebsd-uucp)

SEE ALSO
     cu(1), phones(5), remote(5)

HISTORY
     The tip command appeared in 4.2BSD.

BUGS
     The full set of variables is undocumented and should, probably, be pared
     down.

FreeBSD 11.0-PRERELEASE         August 31, 2006        FreeBSD 11.0-PRERELEASE

NAME | SYNOPSIS | DESCRIPTION | ENVIRONMENT | FILES | SEE ALSO | HISTORY | BUGS

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=tip&manpath=FreeBSD+9.2-RELEASE>

home | help