Skip site navigation (1)Skip section navigation (2)

FreeBSD Man Pages

Man Page or Keyword Search:
Man Architecture
Apropos Keyword Search (all sections) Output format
home | help
TFTPD(8)                FreeBSD System Manager's Manual               TFTPD(8)

NAME
     tftpd - Internet Trivial File Transfer Protocol server

SYNOPSIS
     tftpd [-cdClnow] [-F strftime-format] [-s directory] [-u user] [-U umask]
           [directory ...]

DESCRIPTION
     The tftpd utility is a server which supports the Internet Trivial File
     Transfer Protocol (RFC 1350).  The TFTP server operates at the port
     indicated in the `tftp' service description; see services(5).  The server
     is normally started by inetd(8).

     The use of tftp(1) does not require an account or password on the remote
     system.  Due to the lack of authentication information, tftpd will allow
     only publicly readable files to be accessed.  Files containing the string
     ``/../'' or starting with ``../'' are not allowed.  Files may be written
     only if they already exist and are publicly writable.  Note that this
     extends the concept of ``public'' to include all users on all hosts that
     can be reached through the network; this may not be appropriate on all
     systems, and its implications should be considered before enabling tftp
     service.  The server should have the user ID with the lowest possible
     privilege.

     Access to files may be restricted by invoking tftpd with a list of
     directories by including up to 20 pathnames as server program arguments
     in inetd.conf(5).  In this case access is restricted to files whose names
     are prefixed by the one of the given directories.  The given directories
     are also treated as a search path for relative filename requests.

     The -s option provides additional security by changing the root directory
     of tftpd, thereby prohibiting accesses to outside of the specified
     directory.  Because chroot(2) requires super-user privileges, tftpd must
     be run as root.  However, after performing the chroot(2) call, tftpd will
     set its user ID to that of the specified user, or ``nobody'' if no -u
     option is specified.

     The options are:

     -c      Changes the default root directory of a connecting host via
             chroot(2) based on the connecting IP address.  This prevents
             multiple clients from writing to the same file at the same time.
             If the directory does not exist, the client connection is
             refused.  The -s option is required for -c and the specified
             directory is used as a base.

     -C      Operates the same as -c except it falls back to directory
             specified via -s if a directory does not exist for the client's
             IP.

     -F      Use this strftime(3) compatible format string for the creation of
             the suffix if -W is specified.  By default the string "%Y%m%d" is
             used.

     -d, -d [value]
             Enables debug output.  If value is not specified, then the debug
             level is increased by one for each instance of -d which is
             specified.

             If value is specified, then the debug level is set to value.  The
             debug level is a bitmask implemented in
             src/libexec/tftpd/tftp-utils.h.  Valid values are 0 (DEBUG_NONE),
             1 (DEBUG_PACKETS), 2, (DEBUG_SIMPLE), 4 (DEBUG_OPTIONS), and 8
             (DEBUG_ACCESS).  Multiple debug values can be combined in the
             bitmask by logically OR'ing the values.  For example, specifying
             -d 15 will enable all the debug values.

     -l      Log all requests using syslog(3) with the facility of LOG_FTP.
             Note: Logging of LOG_FTP messages must also be enabled in the
             syslog configuration file, syslog.conf(5).

     -n      Suppress negative acknowledgement of requests for nonexistent
             relative filenames.

     -o      Disable support for RFC2347 style TFTP Options.

     -s directory
             Cause tftpd to change its root directory to directory.  After
             doing that but before accepting commands, tftpd will switch
             credentials to an unprivileged user.

     -u user
             Switch credentials to user (default ``nobody'') when the -s
             option is used.  The user must be specified by name, not a
             numeric UID.

     -U umask
             Set the umask for newly created files.  The default is 022
             (S_IWGRP | S_IWOTH).

     -w      Allow write requests to create new files.  By default tftpd
             requires that the file specified in a write request exist.  Note
             that this only works in directories writable by the user
             specified with -u option

     -W      As -w but append a YYYYMMDD.nn sequence number to the end of the
             filename.  Note that the string YYYYMMDD can be changed with the
             -F option.

SEE ALSO
     tftp(1), chroot(2), syslog(3), inetd.conf(5), services(5),
     syslog.conf(5), inetd(8)

     The following RFC's are supported:

     RFC 1350: The TFTP Protocol (Revision 2).

     RFC 2347: TFTP Option Extension.

     RFC 2348: TFTP Blocksize Option.

     RFC 2349: TFTP Timeout Interval and Transfer Size Options.

     The non-standard rollover and blksize2 TFTP options are mentioned here:

     Extending TFTP, http://www.compuphase.com/tftp.htm.

HISTORY
     The tftpd utility appeared in 4.2BSD; the -s option was introduced in
     FreeBSD 2.2, the -u option was introduced in FreeBSD 4.2, the -c option
     was introduced in FreeBSD 4.3, and the -F and -W options were introduced
     in FreeBSD 7.4.

     Support for Timeout Interval and Transfer Size Options (RFC2349) was
     introduced in FreeBSD 5.0, support for the TFTP Blocksize Option
     (RFC2348) and the blksize2 option was introduced in FreeBSD 7.4.

     Edwin Groothuis <edwin@FreeBSD.org> performed a major rewrite of the
     tftpd and tftp(1) code to support RFC2348.

NOTES
     Files larger than 33,553,919 octets (65535 blocks, last one <512 octets)
     cannot be correctly transferred without client and server supporting
     blocksize negotiation (RFCs 2347 and 2348), or the non-standard TFTP
     rollover option.  As a kludge, tftpd accepts a sequence of block number
     which wrap to zero after 65535, even if the rollover option is not
     specified.

     Many tftp clients will not transfer files over 16,776,703 octets (32767
     blocks), as they incorrectly count the block number using a signed rather
     than unsigned 16-bit integer.

FreeBSD 11.0-PRERELEASE          June 22, 2011         FreeBSD 11.0-PRERELEASE

NAME | SYNOPSIS | DESCRIPTION | SEE ALSO | HISTORY | NOTES

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=tftpd&sektion=8&manpath=FreeBSD+9.2-RELEASE>

home | help