Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
TDTOOL(1)			 User Commands			     TDTOOL(1)

NAME
       tdtool -	a command line utility to send commands	to a Telldus TellStick

SYNOPSIS
       tdtool [	options	]

OPTIONS
       -[bdefhlnrv] [ --list ] [ --help	]
	      [	 --list-sensors	 ]  [ --list-devices ] [ --on device ] [ --off
	      device ] [ --bell	device ] [ --learn device ] [ --dimlevel level
	      --dim device ] [ --raw input ]

       --list (-l short	option)

	      List currently configured	devices	and all	discovered sensors.

       --list-sensors

       --list-devices

	      Alternative  devices/sensors  listing: Shows devices and/or sen-
	      sors using key=value format (with	tabs as	 separators,  one  de-
	      vice/sensor per line, no header lines.)

       --help (-h short	option)

	      Shows this screen.

       --on device (-n short option)

	      Turns  on	device.	'device' could either be an integer of the de-
	      vice-id, or the name of the device.  Both	device-id and name  is
	      outputed with the	--list option

       --off device (-f	short option)

	      Turns off	device.	'device' could either be an integer of the de-
	      vice-id, or the name of the device.  Both	device-id and name  is
	      outputed with the	--list option

       --dim device (-d	short option)

	      Dims  device.  'device'  could  either  be an integer of the de-
	      vice-id, or the name of the device.  Both	device-id and name  is
	      outputed	with  the  --list  option Note:	The dimlevel parameter
	      must be set before using this option.

       --dimlevel level	(-v short option)

	      Set dim level. 'level' should an integer,	0-255.	Note: This pa-
	      rameter must be set before using dim.

       --bell device (-b short option)

	      Sends  bell  command  to devices supporting this.	'device' could
	      either be	an integer of the device-id, or	the name  of  the  de-
	      vice.   Both  device-id and name is outputed with	the --list op-
	      tion

       --learn device (-e short	option)

	      Sends a special learn command to devices supporting  this.  This
	      is normaly devices of 'selflearning' type. 'device' could	either
	      be an integer of the device-id, or the name of the device.  Both
	      device-id	and name is outputed with the --list option

       --raw input (-r short option)

	      This command sends a raw command to TellStick.  input can	be ei-
	      ther - or	a filename. If input is	 -  the	 data  is  taken  from
	      stdin, otherwise the data	is taken from the supplied filename.

	      Example	to   turn   on	 an   ArcTech	codeswitch   A1:  echo
	      'S$k$k$k$k$k$k$k$k$k$k$k$k$k$k$k$k$k$k$kk$$kk$$kk$$}+' |	tdtool
	      --raw -

AUTHOR
       Written by Micke	Prag <micke.prag@telldus.se>

REPORTING BUGS
       Report bugs to <info.tech@telldus.se>

COPYRIGHT
       Copyright (C) 2011 Telldus Technologies AB

SEE ALSO
       The  full  documentation	 for tdtool is maintained as a Texinfo manual.
       If the info and tdtool programs are properly installed  at  your	 site,
       the command

	      info tdtool

       should give you access to the complete manual.

tdtool 2.1.2			   July	2017			     TDTOOL(1)

NAME | SYNOPSIS | OPTIONS | AUTHOR | REPORTING BUGS | COPYRIGHT | SEE ALSO

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=tdtool&sektion=1&manpath=FreeBSD+12.0-RELEASE+and+Ports>

home | help