Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
TABLE(5)		    BSD	File Formats Manual		      TABLE(5)

NAME
     table -- format description for smtpd tables

DESCRIPTION
     This manual page documents	the file format	for the	various	tables used in
     the smtpd(8) mail daemon.

     The format	described here applies to tables as defined in smtpd.conf(5).

TABLE TYPES
     There are two types of tables: lists and mappings.	 A list	consists of a
     series of values, while a mapping consists	of a series of keys and	their
     associated	values.	 The following illustrates how to declare them as
     static tables:

	   table mylist	{ value1, value2, value3 }
	   table mymapping { key1 = value1, key2 = value2, key3	= value3 }

     When using	a `file' table,	a list will be written with each value on a
     line by itself:

	   value1
	   value2
	   value3

     A mapping will be written with each key and value on a line, whitespaces
     separating	both columns:

	   key1	   value1
	   key2	   value2
	   key3	   value3

     A file table can be converted to a	Berkeley database using	the makemap(8)
     utility with no syntax change.

     Tables using a `file' or Berkeley DB backend will be referenced as	fol-
     lows:

	   table name file:/path/to/file
	   table name db:/path/to/file.db

   Aliasing tables
     Aliasing tables are mappings that associate a recipient to	one or many
     destinations.  They can be	used in	two contexts: primary domain aliases
     and virtual domain	mapping.

	   accept for domain example.org alias <myaliases> deliver to mbox
	   accept for domain example.org virtual <myaliases> deliver to	mbox

     In	a primary domain context, the key is the user part of the recipient
     address, whilst the value is one or many recipients as described in
     aliases(5):

	   user1   otheruser
	   user2   otheruser1,otheruser2
	   user3   otheruser@example.com

     In	a virtual domain context, the key is either a user part, a full	email
     address or	a catch	all, following selection rules described in
     smtpd.conf(5), and	the value is one or many recipients as described in
     aliases(5):

	   user1		   otheruser
	   user2@example.org	   otheruser1,otheruser2
	   @example.org		   otheruser@example.com
	   @			   catchall@example.com

   Domain tables
     Domain tables are simple lists of domains.	 They can only be used in one
     context:

	   accept for domain <mydomains> deliver to mbox

     In	that context, the list of domains will be matched against the recipi-
     ent domain.  For `static',	`file' and dbopen(3) backends, a wildcard may
     be	used so	the domain table may contain:

	   example.org
	   *.example.org

   Credentials tables
     Credentials tables	are mappings of	credentials.  They can be used in two
     contexts:

	   listen on tls [...] auth <credentials>
	   accept for any relay	tls+auth://label@host auth <credentials>

     In	a listener context, the	credentials are	a mapping of username and en-
     crypted passwords:

	   user1   $2a$06$hIJ4QfMcp.90nJwKqGbKM.MybArjHOTpEtoTV.DgLYAiThuoYmTSe
	   user2   $2a$06$bwSmUOBGcZGamIfRuXGTvuTo3VLbPG9k5yeKNMBtULBhksV5KdGsK

     The passwords are to be encrypted using the smtpctl(8) encrypt subcom-
     mand.

     In	a relay	context, the credentials are a mapping of labels and user-
     name:password pairs, where	the username may be omitted if identical to
     the label:

	   label1  user:password
	   label2  password

     The label must be unique and is used as a selector	for the	proper creden-
     tials when	multiple credentials are valid for a single destination.  The
     password is not encrypted as it must be provided to the remote host.

   Netaddr tables
     Netaddr tables are	lists of IPv4 and IPv6 network addresses.  They	can
     only be used in the following context:

	   accept from source <netaddr>	for domain example.org deliver to mbox

     When used as a "from source", the address of a client is compared to the
     list of addresses in the table until a match is found.

     A netaddr table can contain exact addresses or netmasks, and looks	as
     follow:

	   192.168.1.1
	   ::1
	   ipv6:::1
	   192.168.1.0/24

   Userinfo tables
     User info tables are used to described virtual system users.  They	are
     used in rule context to specify an	alternate user base, mapping virtual
     users to local system UID,	GID and	home directory.

	   accept for domain example.org userbase <userinfo> deliver to	maildir

     The userinfo table	is a mapping from virtual user names to	a set of sys-
     tem user ID, group	ID and path to home directory.

     A userinfo	table looks as follows:

	   joe	   1000:100:/home/virtual/joe
	   jack	   1000:100:/home/virtual/jack

     In	this example, both joe and jack	are virtual users mapped to the	local
     system user with UID 1000 and GID 100, but	different home directories.
     These directories may contain a forward(5)	file.

   Source tables
     Source tables are lists of	IPv4 and IPv6 addresses.  They can only	be
     used in the following context:

	   accept for domain example.org relay source <addresses>

     Successive	queries	to the source table will return	the elements one by
     one.

     A source table looks as follow:

	   192.168.1.2
	   192.168.1.3
	   ::1
	   ::2
	   ipv6:::3
	   ipv6:::4

   Mailaddr tables
     Mailaddr tables are lists of email	addresses.  They can be	used in	the
     following contexts:

	   accept sender <senders> for domain example.org deliver to mbox
	   accept for domain example.org recipient <recipients>	deliver	to mbox

     A mailaddr	entry is used to match an email	address	against	a username, a
     domain or a full email address.  A	"*" wildcard may be used in part of
     the domain	name.

     A mailaddr	table looks as follow:

	   user
	   @domain
	   user@domain
	   user@*.domain

   Addrname tables
     Addrname tables are used to map IP	addresses to hostnames.	 They can be
     used in both listen context and relay context:

	   listen on 0.0.0.0 hostnames <addrname>
	   accept for any relay	hostnames <addrname>

     In	listen context,	the table is used to look up the server	name to	adver-
     tise depending on the local address of the	socket on which	a connection
     is	accepted.  In relay context, the table is used to determine the	host-
     name for the HELO sequence	of the SMTP protocol, depending	on the local
     address used for the outgoing connection.

     The format	is a mapping from inet4	or inet6 addresses to hostnames:

	   ::1		   localhost
	   127.0.0.1	   localhost
	   88.190.23.165   www.opensmtpd.org

SEE ALSO
     smtpd.conf(5), makemap(8),	smtpd(8)

BSD			       November	30, 2015			   BSD

NAME | DESCRIPTION | TABLE TYPES | SEE ALSO

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=table&sektion=5&manpath=FreeBSD+11.0-RELEASE+and+Ports>

home | help