Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
STROBE 1.05(1)		    General Commands Manual		STROBE 1.05(1)

NAME
       strobe -	Super optimised	TCP port surveyor

SYNOPSIS
       strobe [	-vVmdbepPAtnSilfsaM ] [host1 ... [hostn]]

DESCRIPTION
       strobe  is  a network/security tool that	locates	and describes all lis-
       tening tcp ports	on a (remote) host or on many  hosts  in  a  bandwidth
       utilisation maximising, and process resource minimising manner.

       strobe approximates a parallel finite state machine internally. In non-
       linear multi-host mode it attempts to apportion bandwidth  and  sockets
       among  the  hosts very efficiently.  This can reap appreciable gains in
       speed for multiple distinct hosts/routes.

       On a machine with a reasonable number of	sockets, strobe	is fast	enough
       to port scan entire Internet sub	domains. It is even possible to	survey
       an entire small country in a reasonable time from a fast	machine	on the
       network	backbone, provided the machine in question uses	dynamic	socket
       allocation or has had its static	socket allocation increased  very  ap-
       preciably (check	your kernel options). In this very limited application
       strobe is said to be faster than	ISS2.1 (a high quality commercial  se-
       curity scanner by cklaus@iss.net	and friends) or	PingWare (also commer-
       cial).

OPTIONS
       -v     Verbose output.

       -V     Verbose statistical output.

       -m     Minimise output. Only print hostname, port tuples.  Implies  -d.
	      Useful for automated output parsing.

       -d     Delete duplicate entries for port	descriptions. i.e use only the
	      first definition.

       -g     Disable usage of getpeername(2).	On solaris 2.3	machines  this
	      causes a core dump, for reasons unknown. This behaviour is fixed
	      with solaris 2.4.	Under Linux, HP	and perhaps other unix	imple-
	      mentations,  false  tcp connection positives may occur when this
	      option is	activated.

       -s     Statistical information describing the average of	all hosts sur-
	      veyed is sent to stderr on completion.

       -q     Quiet mode. Don't	print non-fatal	errors or the (c) message.

       -d     Display  only  the  first	description in the port	services entry
	      file (Cf.	 -B).

       -o file
	      Direct output (but not any messages which	can be affected	by -q)
	      to file.

       -b number
	      Beginning	(starting) port	number.

       -e number
	      Ending port number.

       -p number
	      Port number if you intend	to scan	a single port.

       -P number
	      Local  port  to bind outgoing connection requests	to.  (you will
	      normally need super-user privileges to bind ports	 smaller  than
	      1024)

       -A address
	      Interface	 address to send outgoing connection requests from for
	      multi-homed machines.

       -t number
	      Time after which a connection attempt to a completely  unrespon-
	      sive host/port is	aborted.

       -n number
	      Use this number of sockets in parallel (defaults to 64).	strobe
	      attempts to figure out if	number is greater than the quantity of
	      available	 sockets  at  any point	in time	-- and if so, only use
	      the amount found.	On some	UNIX implementations such as  Solaris,
	      this  appears  not  to  work correctly and you may find yourself
	      with unusual errors such as NO ROUTE TO HOST when	 you  hit  the
	      socket  ceiling.	Remember  that	strobe probably	isn't the only
	      process on the system desiring a socket or  two.	Having	strobe
	      pilfer  all  the spare sockets away from inetd(8)	and other dae-
	      mons and clients isn't such a crash hot idea, unless you want to
	      stop all new incoming and	outgoing connections.

       -S file
	      Change the default port services description file	to file.  Note
	      that if -S is not	specified port services	are loaded from	one of
	      strobe.services,	/usr/local/lib/strobe.services,	 or  /etc/ser-
	      vices.

       -i file
	      Obtain hostnames to strobe from file rather than from  the  com-
	      mand  line.  Note	that only the first white-space	separated word
	      in each line of file is used, so one can feed in files  such  as
	      /etc/hosts.  If filename is '-' ,	stdin will be used.

       -l     Probe hosts linearly (sequentially) rather than in parallel. The
	      actual ports on each host	are still checked in a parallel	manner
	      (with a parallelism of -n	(defaults to 64)).

       -f     Fast  mode,  probe  only the tcp ports detailed in the port ser-
	      vices file (see -S).

       -a number
	      Abort and	skip to	the next host after ports upto to number  have
	      been  probed  and	still no connections have occurred. Due	to the
	      parallel nature of the probing, reply packets for	n+m may	return
	      before those relating to n. What this means is that ports	> num-
	      ber may be probed. If strobe see's a connection on  any  one  of
	      these  higher ports before its negated all possibility of	a ser-
	      vice listening on	ports <= number	then despite the fact that all
	      ports  up	to and including number	may turn out to	be connection-
	      less, strobe will	`abort the abort'. This	is considered optimal,
	      if unusual behaviour.

       -M     Mail  a  bug  report, or tcp/udp port description	to the current
	      source maintainer.

EXAMPLES
       strobe -n 120 -a	80 -i /etc/hosts -s -f -V -S services -o out

       strobe all entries in /etc/hosts	(identical ip  addresses  are  skipped
       automagically)  using 120 sockets in parallel, but only check the indi-
       vidual tcp ports	mentioned in services.	If we have probed up  to  port
       80  on  a host and have still not yet evidenced a connection, then skip
       that host. Display speed/time statistics	for each host and for the  to-
       tality of hosts to stderr. Place	the regular output in out.

       ypcat hosts | strobe -p 80 -t 2 -A 203.4.184.1 -P 53

       strobe  all  hosts  in  your  hosts YP/NIS-table	for WWW-servers. Use a
       timeout of two seconds.	Set the	source address to the 203.4.184.1  in-
       terface.	 Make  all  connection	requests  appear  to come from port 53
       (DNS).

BUGS
       Strobe performs no other	security functions (yet) and does  not	verify
       route  blocking	against	UDP or TCP handshake sequence guessing one-way
       IP spoofing attacks.

AUTHOR
       Julian Assange

	      EMAIL:
		   strobe@suburbia.net
		   proff@suburbia.net

OFFICAL	DISTRIBUTION
       ftp://suburbia.net:/pub/strobe.tgz

COPYRIGHT
       Copyright (c) Julian Assange 1995-1999, All rights reserved.

       This software has only  three  copyright	 restrictions.	Firstly,  this
       copyright  notice  must remain intact and unmodified. Secondly, the Au-
       thor, Julian Assange, must be appropriately and prominantly credited in
       any  documentation  associated  with  any derived work.	Thirdly	unless
       otherwise negotiated with the author, you may  not  sell	 this  program
       commercially, reasonable	distribution costs excepted.

       Use  and	 or  distribution  of  this software implies acceptance	of the
       above.

       So there.

SEE ALSO
       nslookup(1), host(1), dig(1), socket(2),	bind(2), connect(2), iss(1).

								STROBE 1.05(1)

NAME | SYNOPSIS | DESCRIPTION | OPTIONS | EXAMPLES | BUGS | AUTHOR | OFFICAL DISTRIBUTION | COPYRIGHT | SEE ALSO

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=strobe&sektion=1&manpath=FreeBSD+13.0-RELEASE+and+Ports>

home | help