Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages


home | help
srec_needham(5)		      File Formats Manual	       srec_needham(5)

       srec_needham - Needham EMP-series programmer ASCII file format

       This  format  is	understood by Needham Electronics' EMP-series program-
       mers.  See  for  more  information.	 (This
       format  is very similar to the ASCII-Hex	format,	but without the	^B and
       ^C guard	characters.)

       Each data byte is represented as	2 hexadecimal characters, and is sepa-
       rated by	white space from all other data	bytes.

       The  address for	data bytes is set by using a sequence of $Annnn, char-
       acters, where nnnn is the 8-character ascii representation of  the  ad-
       dress.	The comma is required.	There is no need for an	address	record
       unless there are	gaps.  Implicitly, the file starts a address 0	if  no
       address is set before the first data byte.

   Size	Multiplier
       In general, binary data will expand in sized by approximately 3.0 times
       when represented	with this format.

       Here is an example  ascii-hex  file.   It  contains  the	 data  "Hello,
       World[rq] to be loaded at address 0x1000.
	      48 65 6C 6C 6F 2C	20 57 6F 72 6C 64 0A

       srec_cat	version	1.64
       Copyright  (C)  1998,  1999,  2000, 2001, 2002, 2003, 2004, 2005, 2006,
       2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014 Peter Miller

       The srec_cat program comes with ABSOLUTELY NO WARRANTY; for details use
       the 'srec_cat -VERSion License' command.	 This is free software and you
       are welcome to redistribute it under certain  conditions;  for  details
       use the 'srec_cat -VERSion License' command.

       Scott Finneran	E-Mail:
       Peter Miller	E-Mail:

Reference Manual		    SRecord		       srec_needham(5)


Want to link to this manual page? Use this URL:

home | help