Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
solterm(1)		 IPMI Serial over LAN program		    solterm(1)

NAME
       solterm - An IPMI Serial	over LAN program

SYNOPSIS
       solterm

       <connection parms> [-e escape_char] [-notencrypted] [-notauthenticated]
       [-bitrate   (9600|19200|38400|57600|115200)]   [-alerts	  (succeed|de-
       fer|fail)] [-holdoff] [-ack-retries n] [-ack-timeout microseconds] [-v]
       [-q]

DESCRIPTION
       The solterm program allows a user to make a  remote  serial  connection
       over IPMI.  The requires	that the remote	system support IPMI 2.0	Serial
       Over LAN.

OPTIONS
       <connection parms>
	      The parameters for the connection	depend on the connection type.
	      These are	all described in openipmi_conparms (7)

       -e escape_char
	      The  character to	use to escape, or exit,	the program.  Entering
	      this chatacter right after a newline is entered causes the  pro-
	      gram  to	go  into  command mode.	 A single character after this
	      performs a command.  The default	escape	character  is  "~"  as
	      shown below.  Suppported commands	are:

	      ~.     Terminate the program

	      ~B     Send a serial BREAK over the connection

	      ~F     Flush all buffers

	      ~R     Assert the	Ring Indicator (RI) line

	      ~r     Deassert the Ring Indicator (RI) line

	      ~D     Assert DCD	and DSR	lines

	      ~d     Deassert DCD and DSR lines

	      ~C     Pause the output using CTS

	      ~c     Put CTS under BMC control

	      ~?     Help on escape commands

	      ~~     Enter the escape character	twice to send it.

       -notencrypted
	      Do not encrypt the SOL data going	over the connection.

       -notauthenticated
	      Do  not  do integrity checks on the SOL data going over the con-
	      nection.

       -bitrate
	      Set the bitrate to the given value.  The default is whatever the
	      BMC has set it to.

       -alerts
	      This specifies what to do	if a alert that	requires a callout oc-
	      curs on the line.

	      succeed
		     specifies that serial/modem alerts	are to	succeed	 while
		     SoL is active.

	      deferred
		     specifies that serial/modem alerts	are to be deferred for
		     the duration of the SoL session.

	      fail   specifies that  serial/modem  alerts  automatically  fail
		     during the	SoL session. This is the default.

       -holdoff
	      Specifies	 that  CTS,  DTR,  and DSR are to be deasserted	at the
	      start of the SoL session so that the configuration may  be  mod-
	      ifeid before the handshake is released.

       -v     Be more verbose.	Maybe specified	multiple time for more output.

       -q     Be less verbose.	Maybe specified	multiple time for less output.

SEE ALSO
       openipmi_conparms(7)

KNOWN PROBLEMS
       None

AUTHOR
       Darius Davis <dariusd@users.sourceforge.net>

OpenIPMI			   05/13/03			    solterm(1)

NAME | SYNOPSIS | DESCRIPTION | OPTIONS | SEE ALSO | KNOWN PROBLEMS | AUTHOR

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=solterm&sektion=1&manpath=FreeBSD+13.0-RELEASE+and+Ports>

home | help