Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
SMTPD(8)		    System Manager's Manual		      SMTPD(8)

NAME
       smtpd - Postfix SMTP server

SYNOPSIS
       smtpd [generic Postfix daemon options]

       sendmail	-bs

DESCRIPTION
       The  SMTP  server accepts network connection requests and performs zero
       or more SMTP transactions per connection.   Each	 received  message  is
       piped  through  the  cleanup(8) daemon, and is placed into the incoming
       queue as	one single queue file.	For this mode of operation,  the  pro-
       gram expects to be run from the master(8) process manager.

       Alternatively,  the SMTP	server be can run in stand-alone mode; this is
       traditionally obtained with "sendmail -bs".  When the SMTP server  runs
       stand-alone  with  non  $mail_owner  privileges,	 it receives mail even
       while the mail system is	not running, deposits messages	directly  into
       the  maildrop queue, and	disables the SMTP server's access policies. As
       of Postfix version 2.3, the SMTP	server refuses to  receive  mail  from
       the network when	it runs	with non $mail_owner privileges.

       The  SMTP  server  implements  a	variety	of policies for	connection re-
       quests, and for parameters given	to HELO, ETRN,	MAIL  FROM,  VRFY  and
       RCPT TO commands. They are detailed below and in	the main.cf configura-
       tion file.

SECURITY
       The SMTP	server is moderately  security-sensitive.  It  talks  to  SMTP
       clients	and  to	DNS servers on the network. The	SMTP server can	be run
       chrooted	at fixed low privilege.

STANDARDS
       RFC 821 (SMTP protocol)
       RFC 1123	(Host requirements)
       RFC 1652	(8bit-MIME transport)
       RFC 1869	(SMTP service extensions)
       RFC 1870	(Message size declaration)
       RFC 1985	(ETRN command)
       RFC 2034	(SMTP enhanced status codes)
       RFC 2554	(AUTH command)
       RFC 2821	(SMTP protocol)
       RFC 2920	(SMTP pipelining)
       RFC 3030	(CHUNKING without BINARYMIME)
       RFC 3207	(STARTTLS command)
       RFC 3461	(SMTP DSN extension)
       RFC 3463	(Enhanced status codes)
       RFC 3848	(ESMTP transmission types)
       RFC 4409	(Message submission)
       RFC 4954	(AUTH command)
       RFC 5321	(SMTP protocol)
       RFC 6531	(Internationalized SMTP)
       RFC 6533	(Internationalized Delivery Status Notifications)
       RFC 7505	("Null MX" No Service Resource Record)

DIAGNOSTICS
       Problems	and transactions are logged to syslogd(8) or postlogd(8).

       Depending on the	setting	of the notify_classes parameter, the  postmas-
       ter  is	notified of bounces, protocol problems,	policy violations, and
       of other	trouble.

CONFIGURATION PARAMETERS
       Changes to main.cf are picked up	automatically, as  smtpd(8)  processes
       run for only a limited amount of	time. Use the command "postfix reload"
       to speed	up a change.

       The text	below provides only a parameter	summary. See  postconf(5)  for
       more details including examples.

COMPATIBILITY CONTROLS
       The  following  parameters  work	 around	implementation errors in other
       software, and/or	allow you to override standards	in  order  to  prevent
       undesirable use.

       broken_sasl_auth_clients	(no)
	      Enable  interoperability with remote SMTP	clients	that implement
	      an obsolete version of the AUTH command (RFC 4954).

       disable_vrfy_command (no)
	      Disable the SMTP VRFY command.

       smtpd_noop_commands (empty)
	      List of commands that the	Postfix	SMTP server  replies  to  with
	      "250  Ok",  without doing	any syntax checks and without changing
	      state.

       strict_rfc821_envelopes (no)
	      Require that addresses received in SMTP MAIL FROM	 and  RCPT  TO
	      commands	are  enclosed with <>, and that	those addresses	do not
	      contain RFC 822 style comments or	phrases.

       Available in Postfix version 2.1	and later:

       smtpd_reject_unlisted_sender (no)
	      Request that the Postfix SMTP server rejects mail	 from  unknown
	      sender  addresses,  even when no explicit	reject_unlisted_sender
	      access restriction is specified.

       smtpd_sasl_exceptions_networks (empty)
	      What remote SMTP clients the Postfix SMTP	server will not	 offer
	      AUTH support to.

       Available in Postfix version 2.2	and later:

       smtpd_discard_ehlo_keyword_address_maps (empty)
	      Lookup  tables,  indexed by the remote SMTP client address, with
	      case insensitive lists of	EHLO keywords  (pipelining,  starttls,
	      auth,  etc.)  that  the Postfix SMTP server will not send	in the
	      EHLO response to a remote	SMTP client.

       smtpd_discard_ehlo_keywords (empty)
	      A	case insensitive list of EHLO keywords (pipelining,  starttls,
	      auth,  etc.)  that  the Postfix SMTP server will not send	in the
	      EHLO response to a remote	SMTP client.

       smtpd_delay_open_until_valid_rcpt (yes)
	      Postpone the start of an SMTP mail  transaction  until  a	 valid
	      RCPT TO command is received.

       Available in Postfix version 2.3	and later:

       smtpd_tls_always_issue_session_ids (yes)
	      Force  the  Postfix  SMTP	server to issue	a TLS session id, even
	      when  TLS	 session  caching  is	turned	 off   (smtpd_tls_ses-
	      sion_cache_database is empty).

       Available in Postfix version 2.6	and later:

       tcp_windowsize (0)
	      An  optional  workaround for routers that	break TCP window scal-
	      ing.

       Available in Postfix version 2.7	and later:

       smtpd_command_filter (empty)
	      A	mechanism to transform commands	from remote SMTP clients.

       Available in Postfix version 2.9	and later:

       smtpd_per_record_deadline (normal: no, overload:	yes)
	      Change  the  behavior  of	 the  smtpd_timeout  and  smtpd_start-
	      tls_timeout  time	 limits,  from	a time limit per read or write
	      system call, to a	time limit  to	send  or  receive  a  complete
	      record  (an  SMTP	command	line, SMTP response line, SMTP message
	      content line, or TLS protocol message).

       Available in Postfix version 3.0	and later:

       smtpd_dns_reply_filter (empty)
	      Optional filter for Postfix SMTP server DNS lookup results.

ADDRESS	REWRITING CONTROLS
       See the ADDRESS_REWRITING_README	document for a detailed	discussion  of
       Postfix address rewriting.

       receive_override_options	(empty)
	      Enable or	disable	recipient validation, built-in content filter-
	      ing, or address mapping.

       Available in Postfix version 2.2	and later:

       local_header_rewrite_clients (permit_inet_interfaces)
	      Rewrite message header addresses in mail from these clients  and
	      update incomplete	addresses with the domain name in $myorigin or
	      $mydomain; either	 don't	rewrite	 message  headers  from	 other
	      clients at all, or rewrite message headers and update incomplete
	      addresses	with the domain	 specified  in	the  remote_header_re-
	      write_domain parameter.

BEFORE-SMTPD PROXY AGENT
       Available in Postfix version 2.10 and later:

       smtpd_upstream_proxy_protocol (empty)
	      The  name	of the proxy protocol used by an optional before-smtpd
	      proxy agent.

       smtpd_upstream_proxy_timeout (5s)
	      The time	limit  for  the	 proxy	protocol  specified  with  the
	      smtpd_upstream_proxy_protocol parameter.

AFTER QUEUE EXTERNAL CONTENT INSPECTION	CONTROLS
       As of version 1.0, Postfix can be configured to send new	mail to	an ex-
       ternal content filter AFTER the mail is queued. This content filter  is
       expected	 to inject mail	back into a (Postfix or	other) MTA for further
       delivery. See the FILTER_README document	for details.

       content_filter (empty)
	      After the	message	is queued, send	 the  entire  message  to  the
	      specified	transport:destination.

BEFORE QUEUE EXTERNAL CONTENT INSPECTION CONTROLS
       As  of  version	2.1, the Postfix SMTP server can be configured to send
       incoming	mail to	a real-time SMTP-based content filter BEFORE  mail  is
       queued.	This content filter is expected	to inject mail back into Post-
       fix.  See the SMTPD_PROXY_README	document for details on	how to config-
       ure and operate this feature.

       smtpd_proxy_filter (empty)
	      The hostname and TCP port	of the mail filtering proxy server.

       smtpd_proxy_ehlo	($myhostname)
	      How  the	Postfix	SMTP server announces itself to	the proxy fil-
	      ter.

       smtpd_proxy_options (empty)
	      List of options that control how the Postfix SMTP	server	commu-
	      nicates with a before-queue content filter.

       smtpd_proxy_timeout (100s)
	      The  time	limit for connecting to	a proxy	filter and for sending
	      or receiving information.

BEFORE QUEUE MILTER CONTROLS
       As of version 2.3, Postfix supports the Sendmail	version	8 Milter (mail
       filter)	protocol.  These content filters run outside Postfix. They can
       inspect the SMTP	command	stream and the message content,	 and  can  re-
       quest  modifications  before  mail  is queued. For details see the MIL-
       TER_README document.

       smtpd_milters (empty)
	      A	list of	Milter (mail filter) applications for  new  mail  that
	      arrives via the Postfix smtpd(8) server.

       milter_protocol (6)
	      The  mail	 filter	 protocol version and optional protocol	exten-
	      sions for	communication with  a  Milter  application;  prior  to
	      Postfix 2.6 the default protocol is 2.

       milter_default_action (tempfail)
	      The  default  action when	a Milter (mail filter) response	is un-
	      available	(for example,  bad  Postfix  configuration  or	Milter
	      failure).

       milter_macro_daemon_name	($myhostname)
	      The  {daemon_name} macro value for Milter	(mail filter) applica-
	      tions.

       milter_macro_v ($mail_name $mail_version)
	      The {v} macro value for Milter (mail filter) applications.

       milter_connect_timeout (30s)
	      The time limit for connecting to a Milter	(mail filter) applica-
	      tion, and	for negotiating	protocol options.

       milter_command_timeout (30s)
	      The  time	 limit	for  sending an	SMTP command to	a Milter (mail
	      filter) application, and for receiving the response.

       milter_content_timeout (300s)
	      The time limit for sending message content  to  a	 Milter	 (mail
	      filter) application, and for receiving the response.

       milter_connect_macros (see 'postconf -d'	output)
	      The  macros  that	 are sent to Milter (mail filter) applications
	      after completion of an SMTP connection.

       milter_helo_macros (see 'postconf -d' output)
	      The macros that are sent to Milter  (mail	 filter)  applications
	      after the	SMTP HELO or EHLO command.

       milter_mail_macros (see 'postconf -d' output)
	      The  macros  that	 are sent to Milter (mail filter) applications
	      after the	SMTP MAIL FROM command.

       milter_rcpt_macros (see 'postconf -d' output)
	      The macros that are sent to Milter  (mail	 filter)  applications
	      after the	SMTP RCPT TO command.

       milter_data_macros (see 'postconf -d' output)
	      The  macros  that	 are  sent to version 4	or higher Milter (mail
	      filter) applications after the SMTP DATA command.

       milter_unknown_command_macros (see 'postconf -d'	output)
	      The macros that are sent to version 3  or	 higher	 Milter	 (mail
	      filter) applications after an unknown SMTP command.

       milter_end_of_header_macros (see	'postconf -d' output)
	      The  macros  that	 are sent to Milter (mail filter) applications
	      after the	end of the message header.

       milter_end_of_data_macros (see 'postconf	-d' output)
	      The macros that are sent to Milter  (mail	 filter)  applications
	      after the	message	end-of-data.

       Available in Postfix version 3.1	and later:

       milter_macro_defaults (empty)
	      Optional	list  of  name=value pairs that	specify	default	values
	      for arbitrary macros that	Postfix	may send  to  Milter  applica-
	      tions.

       Available in Postfix version 3.2	and later:

       smtpd_milter_maps (empty)
	      Lookup tables with Milter	settings per remote SMTP client	IP ad-
	      dress.

GENERAL	CONTENT	INSPECTION CONTROLS
       The following parameters	are applicable for both	built-in and  external
       content filters.

       Available in Postfix version 2.1	and later:

       receive_override_options	(empty)
	      Enable or	disable	recipient validation, built-in content filter-
	      ing, or address mapping.

EXTERNAL CONTENT INSPECTION CONTROLS
       The following parameters	are applicable for both	before-queue  and  af-
       ter-queue content filtering.

       Available in Postfix version 2.1	and later:

       smtpd_authorized_xforward_hosts (empty)
	      What  remote  SMTP  clients are allowed to use the XFORWARD fea-
	      ture.

SASL AUTHENTICATION CONTROLS
       Postfix SASL support (RFC 4954) can be used to authenticate remote SMTP
       clients	to  the	 Postfix  SMTP server, and to authenticate the Postfix
       SMTP client to a	remote SMTP server.  See the SASL_README document  for
       details.

       broken_sasl_auth_clients	(no)
	      Enable  interoperability with remote SMTP	clients	that implement
	      an obsolete version of the AUTH command (RFC 4954).

       smtpd_sasl_auth_enable (no)
	      Enable SASL authentication in the	Postfix	SMTP server.

       smtpd_sasl_local_domain (empty)
	      The name of the Postfix SMTP server's local SASL	authentication
	      realm.

       smtpd_sasl_security_options (noanonymous)
	      Postfix SMTP server SASL security	options; as of Postfix 2.3 the
	      list of available	features depends on the	SASL server  implemen-
	      tation that is selected with smtpd_sasl_type.

       smtpd_sender_login_maps (empty)
	      Optional	lookup	table  with  the SASL login names that own the
	      sender (MAIL FROM) addresses.

       Available in Postfix version 2.1	and later:

       smtpd_sasl_exceptions_networks (empty)
	      What remote SMTP clients the Postfix SMTP	server will not	 offer
	      AUTH support to.

       Available in Postfix version 2.1	and 2.2:

       smtpd_sasl_application_name (smtpd)
	      The  application name that the Postfix SMTP server uses for SASL
	      server initialization.

       Available in Postfix version 2.3	and later:

       smtpd_sasl_authenticated_header (no)
	      Report the SASL authenticated user name in the smtpd(8) Received
	      message header.

       smtpd_sasl_path (smtpd)
	      Implementation-specific information that the Postfix SMTP	server
	      passes through to	the SASL plug-in implementation	 that  is  se-
	      lected with smtpd_sasl_type.

       smtpd_sasl_type (cyrus)
	      The  SASL	 plug-in  type that the	Postfix	SMTP server should use
	      for authentication.

       Available in Postfix version 2.5	and later:

       cyrus_sasl_config_path (empty)
	      Search path for Cyrus SASL application configuration files, cur-
	      rently used only to locate the $smtpd_sasl_path.conf file.

       Available in Postfix version 2.11 and later:

       smtpd_sasl_service (smtp)
	      The  service name	that is	passed to the SASL plug-in that	is se-
	      lected with smtpd_sasl_type and smtpd_sasl_path.

       Available in Postfix version 3.4	and later:

       smtpd_sasl_response_limit (12288)
	      The maximum length of a SASL client's response to	a server chal-
	      lenge.

STARTTLS SUPPORT CONTROLS
       Detailed	 information  about STARTTLS configuration may be found	in the
       TLS_README document.

       smtpd_tls_security_level	(empty)
	      The SMTP TLS security level for the Postfix SMTP server; when  a
	      non-empty	value is specified, this overrides the obsolete	param-
	      eters smtpd_use_tls and smtpd_enforce_tls.

       smtpd_sasl_tls_security_options ($smtpd_sasl_security_options)
	      The SASL authentication security options that the	 Postfix  SMTP
	      server uses for TLS encrypted SMTP sessions.

       smtpd_starttls_timeout (see 'postconf -d' output)
	      The time limit for Postfix SMTP server write and read operations
	      during TLS startup and shutdown handshake	procedures.

       smtpd_tls_CAfile	(empty)
	      A	file containing	(PEM  format)  CA  certificates	 of  root  CAs
	      trusted to sign either remote SMTP client	certificates or	inter-
	      mediate CA certificates.

       smtpd_tls_CApath	(empty)
	      A	directory containing (PEM format) CA certificates of root  CAs
	      trusted to sign either remote SMTP client	certificates or	inter-
	      mediate CA certificates.

       smtpd_tls_always_issue_session_ids (yes)
	      Force the	Postfix	SMTP server to issue a TLS  session  id,  even
	      when   TLS   session   caching  is  turned  off  (smtpd_tls_ses-
	      sion_cache_database is empty).

       smtpd_tls_ask_ccert (no)
	      Ask a remote SMTP	client for a client certificate.

       smtpd_tls_auth_only (no)
	      When TLS encryption is optional in the Postfix SMTP  server,  do
	      not announce or accept SASL authentication over unencrypted con-
	      nections.

       smtpd_tls_ccert_verifydepth (9)
	      The verification depth for remote	SMTP client certificates.

       smtpd_tls_cert_file (empty)
	      File with	the Postfix SMTP server	RSA certificate	in PEM format.

       smtpd_tls_exclude_ciphers (empty)
	      List of ciphers or cipher	types to exclude from the SMTP	server
	      cipher list at all TLS security levels.

       smtpd_tls_dcert_file (empty)
	      File with	the Postfix SMTP server	DSA certificate	in PEM format.

       smtpd_tls_dh1024_param_file (empty)
	      File  with DH parameters that the	Postfix	SMTP server should use
	      with non-export EDH ciphers.

       smtpd_tls_dh512_param_file (empty)
	      File with	DH parameters that the Postfix SMTP server should  use
	      with export-grade	EDH ciphers.

       smtpd_tls_dkey_file ($smtpd_tls_dcert_file)
	      File with	the Postfix SMTP server	DSA private key	in PEM format.

       smtpd_tls_key_file ($smtpd_tls_cert_file)
	      File with	the Postfix SMTP server	RSA private key	in PEM format.

       smtpd_tls_loglevel (0)
	      Enable additional	Postfix	SMTP server logging of TLS activity.

       smtpd_tls_mandatory_ciphers (medium)
	      The  minimum  TLS	cipher grade that the Postfix SMTP server will
	      use with mandatory TLS encryption.

       smtpd_tls_mandatory_exclude_ciphers (empty)
	      Additional list of ciphers or cipher types to exclude  from  the
	      Postfix  SMTP  server cipher list	at mandatory TLS security lev-
	      els.

       smtpd_tls_mandatory_protocols (!SSLv2, !SSLv3)
	      The SSL/TLS protocols accepted by	the Postfix SMTP  server  with
	      mandatory	TLS encryption.

       smtpd_tls_received_header (no)
	      Request that the Postfix SMTP server produces Received:  message
	      headers that include information about the protocol  and	cipher
	      used,  as	 well  as the remote SMTP client CommonName and	client
	      certificate issuer CommonName.

       smtpd_tls_req_ccert (no)
	      With mandatory TLS encryption, require  a	 trusted  remote  SMTP
	      client certificate in order to allow TLS connections to proceed.

       smtpd_tls_wrappermode (no)
	      Run  the Postfix SMTP server in the non-standard "wrapper" mode,
	      instead of using the STARTTLS command.

       tls_daemon_random_bytes (32)
	      The number of pseudo-random bytes	that an	 smtp(8)  or  smtpd(8)
	      process  requests	from the tlsmgr(8) server in order to seed its
	      internal pseudo random number generator (PRNG).

       tls_high_cipherlist (see	'postconf -d' output)
	      The OpenSSL cipherlist for "high"	grade ciphers.

       tls_medium_cipherlist (see 'postconf -d'	output)
	      The OpenSSL cipherlist for "medium" or higher grade ciphers.

       tls_low_cipherlist (see 'postconf -d' output)
	      The OpenSSL cipherlist for "low" or higher grade ciphers.

       tls_export_cipherlist (see 'postconf -d'	output)
	      The OpenSSL cipherlist for "export" or higher grade ciphers.

       tls_null_cipherlist (eNULL:!aNULL)
	      The OpenSSL cipherlist for "NULL"	grade ciphers that provide au-
	      thentication without encryption.

       Available in Postfix version 2.5	and later:

       smtpd_tls_fingerprint_digest (md5)
	      The   message   digest   algorithm   to  construct  remote  SMTP
	      client-certificate  fingerprints	or  public  key	  fingerprints
	      (Postfix	 2.9   and  later)  for	 check_ccert_access  and  per-
	      mit_tls_clientcerts.

       Available in Postfix version 2.6	and later:

       smtpd_tls_protocols (!SSLv2, !SSLv3)
	      List of TLS protocols that the Postfix SMTP server will  exclude
	      or include with opportunistic TLS	encryption.

       smtpd_tls_ciphers (medium)
	      The  minimum  TLS	cipher grade that the Postfix SMTP server will
	      use with opportunistic TLS encryption.

       smtpd_tls_eccert_file (empty)
	      File with	the Postfix SMTP server	ECDSA certificate in PEM  for-
	      mat.

       smtpd_tls_eckey_file ($smtpd_tls_eccert_file)
	      File  with the Postfix SMTP server ECDSA private key in PEM for-
	      mat.

       smtpd_tls_eecdh_grade (see 'postconf -d'	output)
	      The Postfix SMTP server  security	 grade	for  ephemeral	ellip-
	      tic-curve	Diffie-Hellman (EECDH) key exchange.

       tls_eecdh_strong_curve (prime256v1)
	      The  elliptic curve used by the Postfix SMTP server for sensibly
	      strong ephemeral ECDH key	exchange.

       tls_eecdh_ultra_curve (secp384r1)
	      The elliptic curve used by the Postfix SMTP server for maximally
	      strong ephemeral ECDH key	exchange.

       Available in Postfix version 2.8	and later:

       tls_preempt_cipherlist (no)
	      With SSLv3 and later, use	the Postfix SMTP server's cipher pref-
	      erence order instead of the remote  client's  cipher  preference
	      order.

       tls_disable_workarounds (see 'postconf -d' output)
	      List or bit-mask of OpenSSL bug work-arounds to disable.

       Available in Postfix version 2.11 and later:

       tlsmgr_service_name (tlsmgr)
	      The name of the tlsmgr(8)	service	entry in master.cf.

       Available in Postfix version 3.0	and later:

       tls_session_ticket_cipher  (Postfix >= 3.0: aes-256-cbc,	Postfix	< 3.0:
       aes-128-cbc)
	      Algorithm	used to	encrypt	RFC5077	TLS session tickets.

       Available in Postfix version 3.2	and later:

       tls_eecdh_auto_curves (see 'postconf -d'	output)
	      The prioritized list of elliptic curves supported	by the Postfix
	      SMTP client and server.

       Available in Postfix version 3.4	and later:

       smtpd_tls_chain_files (empty)
	      List  of one or more PEM files, each holding one or more private
	      keys directly followed by	a corresponding	certificate chain.

       tls_server_sni_maps (empty)
	      Optional lookup tables that map names received from remote  SMTP
	      clients  via  the	 TLS Server Name Indication (SNI) extension to
	      the appropriate keys and certificate chains.

       Available in Postfix 3.5, 3.4.6,	3.3.5, 3.2.10, 3.1.13 and later:

       tls_fast_shutdown_enable	(yes)
	      A	workaround for implementations that hang Postfix  while	 shut-
	      ting down	a TLS session, until Postfix times out.

       Available in Postfix 3.5	and later:

       info_log_address_format (external)
	      The  email  address  form	that will be used in non-debug logging
	      (info, warning, etc.).

OBSOLETE STARTTLS CONTROLS
       The following configuration parameters  exist  for  compatibility  with
       Postfix versions	before 2.3. Support for	these will be removed in a fu-
       ture release.

       smtpd_use_tls (no)
	      Opportunistic TLS: announce  STARTTLS  support  to  remote  SMTP
	      clients, but do not require that clients use TLS encryption.

       smtpd_enforce_tls (no)
	      Mandatory	TLS: announce STARTTLS support to remote SMTP clients,
	      and require that clients use TLS encryption.

       smtpd_tls_cipherlist (empty)
	      Obsolete Postfix < 2.3 control for the Postfix SMTP  server  TLS
	      cipher list.

SMTPUTF8 CONTROLS
       Preliminary SMTPUTF8 support is introduced with Postfix 3.0.

       smtputf8_enable (yes)
	      Enable  preliminary SMTPUTF8 support for the protocols described
	      in RFC 6531..6533.

       strict_smtputf8 (no)
	      Enable stricter enforcement of the SMTPUTF8 protocol.

       smtputf8_autodetect_classes (sendmail, verify)
	      Detect that a message requires SMTPUTF8 support for  the	speci-
	      fied mail	origin classes.

       Available in Postfix version 3.2	and later:

       enable_idna2003_compatibility (no)
	      Enable   'transitional'	compatibility	between	 IDNA2003  and
	      IDNA2008,	when converting	UTF-8 domain names to/from  the	 ASCII
	      form that	is used	for DNS	lookups.

VERP SUPPORT CONTROLS
       With  VERP  style delivery, each	recipient of a message receives	a cus-
       tomized copy of the message with	his/her	own recipient address  encoded
       in the envelope sender address.	The VERP_README	file describes config-
       uration and operation details of	Postfix	support	for variable  envelope
       return  path addresses.	VERP style delivery is requested with the SMTP
       XVERP command or	with the "sendmail  -V"	 command-line  option  and  is
       available in Postfix version 1.1	and later.

       default_verp_delimiters (+=)
	      The two default VERP delimiter characters.

       verp_delimiter_filter (-=+)
	      The  characters  Postfix accepts as VERP delimiter characters on
	      the Postfix sendmail(1) command line and in SMTP commands.

       Available in Postfix version 1.1	and 2.0:

       authorized_verp_clients ($mynetworks)
	      What remote SMTP clients are allowed to specify the  XVERP  com-
	      mand.

       Available in Postfix version 2.1	and later:

       smtpd_authorized_verp_clients ($authorized_verp_clients)
	      What  remote  SMTP clients are allowed to	specify	the XVERP com-
	      mand.

TROUBLE	SHOOTING CONTROLS
       The DEBUG_README	document describes how to debug	parts of  the  Postfix
       mail system. The	methods	vary from making the software log a lot	of de-
       tail, to	running	some daemon processes under control of a  call	tracer
       or debugger.

       debug_peer_level	(2)
	      The  increment  in verbose logging level when a remote client or
	      server matches a pattern in the debug_peer_list parameter.

       debug_peer_list (empty)
	      Optional list of remote client or	server hostname	or network ad-
	      dress  patterns that cause the verbose logging level to increase
	      by the amount specified in $debug_peer_level.

       error_notice_recipient (postmaster)
	      The recipient of postmaster notifications	 about	mail  delivery
	      problems that are	caused by policy, resource, software or	proto-
	      col errors.

       internal_mail_filter_classes (empty)
	      What categories of Postfix-generated mail	 are  subject  to  be-
	      fore-queue     content	inspection    by    non_smtpd_milters,
	      header_checks and	body_checks.

       notify_classes (resource, software)
	      The list of error	classes	that are reported to the postmaster.

       smtpd_reject_footer (empty)
	      Optional information that	is appended after  each	 Postfix  SMTP
	      server 4XX or 5XX	response.

       soft_bounce (no)
	      Safety  net to keep mail queued that would otherwise be returned
	      to the sender.

       Available in Postfix version 2.1	and later:

       smtpd_authorized_xclient_hosts (empty)
	      What remote SMTP clients are allowed to use the XCLIENT feature.

       Available in Postfix version 2.10 and later:

       smtpd_log_access_permit_actions (empty)
	      Enable logging of	the named "permit" actions in SMTP server  ac-
	      cess  lists  (by	default, the SMTP server logs "reject" actions
	      but not "permit" actions).

KNOWN VERSUS UNKNOWN RECIPIENT CONTROLS
       As of Postfix version 2.0, the SMTP server rejects mail for unknown re-
       cipients. This prevents the mail	queue from clogging up with undeliver-
       able MAILER-DAEMON messages. Additional information on this topic is in
       the LOCAL_RECIPIENT_README and ADDRESS_CLASS_README documents.

       show_user_unknown_table_name (yes)
	      Display  the  name  of the recipient table in the	"User unknown"
	      responses.

       canonical_maps (empty)
	      Optional address mapping lookup tables for message  headers  and
	      envelopes.

       recipient_canonical_maps	(empty)
	      Optional	address	 mapping lookup	tables for envelope and	header
	      recipient	addresses.

       sender_canonical_maps (empty)
	      Optional address mapping lookup tables for envelope  and	header
	      sender addresses.

       Parameters concerning known/unknown local recipients:

       mydestination ($myhostname, localhost.$mydomain,	localhost)
	      The  list	of domains that	are delivered via the $local_transport
	      mail delivery transport.

       inet_interfaces (all)
	      The network interface addresses that this	mail  system  receives
	      mail on.

       proxy_interfaces	(empty)
	      The  network  interface addresses	that this mail system receives
	      mail on by way of	a proxy	or network address translation unit.

       inet_protocols (all)
	      The Internet protocols Postfix will attempt to use  when	making
	      or accepting connections.

       local_recipient_maps (proxy:unix:passwd.byname $alias_maps)
	      Lookup tables with all names or addresses	of local recipients: a
	      recipient	address	is local when its domain  matches  $mydestina-
	      tion, $inet_interfaces or	$proxy_interfaces.

       unknown_local_recipient_reject_code (550)
	      The numerical Postfix SMTP server	response code when a recipient
	      address is local,	and $local_recipient_maps specifies a list  of
	      lookup tables that does not match	the recipient.

       Parameters concerning known/unknown recipients of relay destinations:

       relay_domains (Postfix >= 3.0: empty, Postfix < 3.0: $mydestination)
	      What  destination	 domains  (and subdomains thereof) this	system
	      will relay mail to.

       relay_recipient_maps (empty)
	      Optional lookup tables with all valid addresses in  the  domains
	      that match $relay_domains.

       unknown_relay_recipient_reject_code (550)
	      The  numerical  Postfix  SMTP server reply code when a recipient
	      address matches $relay_domains, and relay_recipient_maps	speci-
	      fies  a  list of lookup tables that does not match the recipient
	      address.

       Parameters concerning known/unknown recipients  in  virtual  alias  do-
       mains:

       virtual_alias_domains ($virtual_alias_maps)
	      Postfix  is  final destination for the specified list of virtual
	      alias domains, that is, domains  for  which  all	addresses  are
	      aliased to addresses in other local or remote domains.

       virtual_alias_maps ($virtual_maps)
	      Optional lookup tables that alias	specific mail addresses	or do-
	      mains to other local or remote address.

       unknown_virtual_alias_reject_code (550)
	      The Postfix SMTP server reply  code  when	 a  recipient  address
	      matches  $virtual_alias_domains,	and $virtual_alias_maps	speci-
	      fies a list of lookup tables that	does not match	the  recipient
	      address.

       Parameters  concerning  known/unknown recipients	in virtual mailbox do-
       mains:

       virtual_mailbox_domains ($virtual_mailbox_maps)
	      Postfix is final destination for the specified list of  domains;
	      mail  is	delivered  via	the  $virtual_transport	 mail delivery
	      transport.

       virtual_mailbox_maps (empty)
	      Optional lookup tables with all valid addresses in  the  domains
	      that match $virtual_mailbox_domains.

       unknown_virtual_mailbox_reject_code (550)
	      The  Postfix  SMTP  server  reply	 code when a recipient address
	      matches  $virtual_mailbox_domains,   and	 $virtual_mailbox_maps
	      specifies	a list of lookup tables	that does not match the	recip-
	      ient address.

RESOURCE AND RATE CONTROLS
       The following parameters	limit resource usage by	the SMTP server	and/or
       control client request rates.

       line_length_limit (2048)
	      Upon  input,  long  lines	 are chopped up	into pieces of at most
	      this length; upon	delivery, long lines are reconstructed.

       queue_minfree (0)
	      The minimal amount of free space in bytes	in the queue file sys-
	      tem that is needed to receive mail.

       message_size_limit (10240000)
	      The  maximal  size in bytes of a message,	including envelope in-
	      formation.

       smtpd_recipient_limit (1000)
	      The maximal number of recipients that the	 Postfix  SMTP	server
	      accepts per message delivery request.

       smtpd_timeout (normal: 300s, overload: 10s)
	      The  time	 limit	for sending a Postfix SMTP server response and
	      for receiving a remote SMTP client request.

       smtpd_history_flush_threshold (100)
	      The maximal number of lines in the Postfix SMTP  server  command
	      history  before it is flushed upon receipt of EHLO, RSET,	or end
	      of DATA.

       Available in Postfix version 2.3	and later:

       smtpd_peername_lookup (yes)
	      Attempt to look up the remote SMTP client	hostname,  and	verify
	      that the name matches the	client IP address.

       The per SMTP client connection count and	request	rate limits are	imple-
       mented in co-operation with the anvil(8)	service, and are available  in
       Postfix version 2.2 and later.

       smtpd_client_connection_count_limit (50)
	      How  many	simultaneous connections any client is allowed to make
	      to this service.

       smtpd_client_connection_rate_limit (0)
	      The maximal number of connection attempts	any client is  allowed
	      to make to this service per time unit.

       smtpd_client_message_rate_limit (0)
	      The  maximal number of message delivery requests that any	client
	      is allowed to make to this service per time unit,	regardless  of
	      whether or not Postfix actually accepts those messages.

       smtpd_client_recipient_rate_limit (0)
	      The maximal number of recipient addresses	that any client	is al-
	      lowed to send to this  service  per  time	 unit,	regardless  of
	      whether or not Postfix actually accepts those recipients.

       smtpd_client_event_limit_exceptions ($mynetworks)
	      Clients  that  are excluded from smtpd_client_*_count/rate_limit
	      restrictions.

       Available in Postfix version 2.3	and later:

       smtpd_client_new_tls_session_rate_limit (0)
	      The maximal number of new	(i.e., uncached) TLS sessions  that  a
	      remote SMTP client is allowed to negotiate with this service per
	      time unit.

       Available in Postfix version 2.9	and later:

       smtpd_per_record_deadline (normal: no, overload:	yes)
	      Change  the  behavior  of	 the  smtpd_timeout  and  smtpd_start-
	      tls_timeout  time	 limits,  from	a time limit per read or write
	      system call, to a	time limit  to	send  or  receive  a  complete
	      record  (an  SMTP	command	line, SMTP response line, SMTP message
	      content line, or TLS protocol message).

       Available in Postfix version 3.1	and later:

       smtpd_client_auth_rate_limit (0)
	      The maximal number of AUTH commands that any client  is  allowed
	      to  send to this service per time	unit, regardless of whether or
	      not Postfix actually accepts those commands.

TARPIT CONTROLS
       When a remote SMTP client makes errors, the Postfix SMTP	server can in-
       sert  delays  before  responding.  This	can help to slow down run-away
       software.  The behavior is controlled by	an error counter  that	counts
       the number of errors within an SMTP session that	a client makes without
       delivering mail.

       smtpd_error_sleep_time (1s)
	      With Postfix version 2.1 and later: the SMTP server response de-
	      lay  after  a  client has	made more than $smtpd_soft_error_limit
	      errors, and fewer	than $smtpd_hard_error_limit  errors,  without
	      delivering mail.

       smtpd_soft_error_limit (10)
	      The  number  of  errors  a remote	SMTP client is allowed to make
	      without delivering mail before the  Postfix  SMTP	 server	 slows
	      down all its responses.

       smtpd_hard_error_limit (normal: 20, overload: 1)
	      The  maximal number of errors a remote SMTP client is allowed to
	      make without delivering mail.

       smtpd_junk_command_limit	(normal: 100, overload:	1)
	      The number of junk commands (NOOP, VRFY, ETRN or	RSET)  that  a
	      remote  SMTP  client  can	 send  before  the Postfix SMTP	server
	      starts to	increment the error counter with each junk command.

       Available in Postfix version 2.1	and later:

       smtpd_recipient_overshoot_limit (1000)
	      The number of recipients that a remote SMTP client can  send  in
	      excess  of  the limit specified with $smtpd_recipient_limit, be-
	      fore the Postfix SMTP server increments  the  per-session	 error
	      count for	each excess recipient.

ACCESS POLICY DELEGATION CONTROLS
       As  of version 2.1, Postfix can be configured to	delegate access	policy
       decisions to an external	server that runs  outside  Postfix.   See  the
       file SMTPD_POLICY_README	for more information.

       smtpd_policy_service_max_idle (300s)
	      The  time	after which an idle SMTPD policy service connection is
	      closed.

       smtpd_policy_service_max_ttl (1000s)
	      The time after which an active SMTPD policy  service  connection
	      is closed.

       smtpd_policy_service_timeout (100s)
	      The  time	limit for connecting to, writing to, or	receiving from
	      a	delegated SMTPD	policy server.

       Available in Postfix version 3.0	and later:

       smtpd_policy_service_default_action  (451  4.3.5	 Server	 configuration
       problem)
	      The default action when an SMTPD policy service request fails.

       smtpd_policy_service_request_limit (0)
	      The  maximal number of requests per SMTPD	policy service connec-
	      tion, or zero (no	limit).

       smtpd_policy_service_try_limit (2)
	      The maximal number of attempts to	send an	SMTPD  policy  service
	      request before giving up.

       smtpd_policy_service_retry_delay	(1s)
	      The  delay between attempts to resend a failed SMTPD policy ser-
	      vice request.

       Available in Postfix version 3.1	and later:

       smtpd_policy_service_policy_context (empty)
	      Optional information that	the Postfix SMTP server	 specifies  in
	      the  "policy_context"  attribute	of  a  policy  service request
	      (originally, to share the	same service endpoint  among  multiple
	      check_policy_service clients).

ACCESS CONTROLS
       The  SMTPD_ACCESS_README	document gives an introduction to all the SMTP
       server access control features.

       smtpd_delay_reject (yes)
	      Wait   until   the   RCPT	  TO   command	  before    evaluating
	      $smtpd_client_restrictions,     $smtpd_helo_restrictions	   and
	      $smtpd_sender_restrictions, or wait until	the ETRN  command  be-
	      fore  evaluating	$smtpd_client_restrictions and $smtpd_helo_re-
	      strictions.

       parent_domain_matches_subdomains	(see 'postconf -d' output)
	      A	list of	Postfix	features where the pattern "example.com"  also
	      matches  subdomains  of example.com, instead of requiring	an ex-
	      plicit ".example.com" pattern.

       smtpd_client_restrictions (empty)
	      Optional restrictions that the Postfix SMTP  server  applies  in
	      the context of a client connection request.

       smtpd_helo_required (no)
	      Require  that  a	remote	SMTP client introduces itself with the
	      HELO or EHLO command before sending the MAIL  command  or	 other
	      commands that require EHLO negotiation.

       smtpd_helo_restrictions (empty)
	      Optional	restrictions  that  the	Postfix	SMTP server applies in
	      the context of a client HELO command.

       smtpd_sender_restrictions (empty)
	      Optional restrictions that the Postfix SMTP  server  applies  in
	      the context of a client MAIL FROM	command.

       smtpd_recipient_restrictions (see 'postconf -d' output)
	      Optional	restrictions  that  the	Postfix	SMTP server applies in
	      the context of a client RCPT TO command,	after  smtpd_relay_re-
	      strictions.

       smtpd_etrn_restrictions (empty)
	      Optional	restrictions  that  the	Postfix	SMTP server applies in
	      the context of a client ETRN command.

       allow_untrusted_routing (no)
	      Forward  mail  with   sender-specified   routing	 (user[@%!]re-
	      mote[@%!]site)  from  untrusted clients to destinations matching
	      $relay_domains.

       smtpd_restriction_classes (empty)
	      User-defined aliases for groups of access	restrictions.

       smtpd_null_access_lookup_key (<>)
	      The lookup key to	be used	in SMTP	access(5)  tables  instead  of
	      the null sender address.

       permit_mx_backup_networks (empty)
	      Restrict	the use	of the permit_mx_backup	SMTP access feature to
	      only domains whose primary MX hosts match	the listed networks.

       Available in Postfix version 2.0	and later:

       smtpd_data_restrictions (empty)
	      Optional access restrictions that	the Postfix  SMTP  server  ap-
	      plies in the context of the SMTP DATA command.

       smtpd_expansion_filter (see 'postconf -d' output)
	      What  characters	are  allowed  in $name expansions of RBL reply
	      templates.

       Available in Postfix version 2.1	and later:

       smtpd_reject_unlisted_sender (no)
	      Request that the Postfix SMTP server rejects mail	 from  unknown
	      sender  addresses,  even when no explicit	reject_unlisted_sender
	      access restriction is specified.

       smtpd_reject_unlisted_recipient (yes)
	      Request that the Postfix SMTP server rejects  mail  for  unknown
	      recipient	 addresses,  even when no explicit reject_unlisted_re-
	      cipient access restriction is specified.

       Available in Postfix version 2.2	and later:

       smtpd_end_of_data_restrictions (empty)
	      Optional access restrictions that	the Postfix  SMTP  server  ap-
	      plies in the context of the SMTP END-OF-DATA command.

       Available in Postfix version 2.10 and later:

       smtpd_relay_restrictions	(permit_mynetworks, permit_sasl_authenticated,
       defer_unauth_destination)
	      Access restrictions for mail relay control that the Postfix SMTP
	      server  applies  in  the	context	of the RCPT TO command,	before
	      smtpd_recipient_restrictions.

SENDER AND RECIPIENT ADDRESS VERIFICATION CONTROLS
       Postfix version 2.1 introduces sender and recipient  address  verifica-
       tion.  This feature is implemented by sending probe email messages that
       are not actually	delivered.  This feature  is  requested	 via  the  re-
       ject_unverified_sender  and reject_unverified_recipient access restric-
       tions.  The status of verification probes is  maintained	 by  the  ver-
       ify(8)  server.	 See the file ADDRESS_VERIFICATION_README for informa-
       tion about how to configure and operate	the  Postfix  sender/recipient
       address verification service.

       address_verify_poll_count (normal: 3, overload: 1)
	      How many times to	query the verify(8) service for	the completion
	      of an address verification request in progress.

       address_verify_poll_delay (3s)
	      The delay	between	queries	for the	completion of an address veri-
	      fication request in progress.

       address_verify_sender ($double_bounce_sender)
	      The  sender address to use in address verification probes; prior
	      to Postfix 2.5 the default was "postmaster".

       unverified_sender_reject_code (450)
	      The numerical Postfix SMTP server	response code when a recipient
	      address is rejected by the reject_unverified_sender restriction.

       unverified_recipient_reject_code	(450)
	      The  numerical Postfix SMTP server response when a recipient ad-
	      dress is rejected	by  the	 reject_unverified_recipient  restric-
	      tion.

       Available in Postfix version 2.6	and later:

       unverified_sender_defer_code (450)
	      The  numerical  Postfix  SMTP server response code when a	sender
	      address probe fails due to a temporary error condition.

       unverified_recipient_defer_code (450)
	      The numerical Postfix SMTP server	response when a	recipient  ad-
	      dress probe fails	due to a temporary error condition.

       unverified_sender_reject_reason (empty)
	      The  Postfix  SMTP  server's  reply when rejecting mail with re-
	      ject_unverified_sender.

       unverified_recipient_reject_reason (empty)
	      The Postfix SMTP server's	reply when  rejecting  mail  with  re-
	      ject_unverified_recipient.

       unverified_sender_tempfail_action ($reject_tempfail_action)
	      The  Postfix  SMTP server's action when reject_unverified_sender
	      fails due	to a temporary error condition.

       unverified_recipient_tempfail_action ($reject_tempfail_action)
	      The Postfix SMTP server's	action when  reject_unverified_recipi-
	      ent fails	due to a temporary error condition.

       Available with Postfix 2.9 and later:

       address_verify_sender_ttl (0s)
	      The  time	 between  changes in the time-dependent	portion	of ad-
	      dress verification probe sender addresses.

ACCESS CONTROL RESPONSES
       The following parameters	control	numerical SMTP reply codes and/or text
       responses.

       access_map_reject_code (554)
	      The numerical Postfix SMTP server	response code for an access(5)
	      map "reject" action.

       defer_code (450)
	      The numerical Postfix SMTP server	response code  when  a	remote
	      SMTP client request is rejected by the "defer" restriction.

       invalid_hostname_reject_code (501)
	      The  numerical Postfix SMTP server response code when the	client
	      HELO or EHLO command parameter is	 rejected  by  the  reject_in-
	      valid_helo_hostname restriction.

       maps_rbl_reject_code (554)
	      The  numerical  Postfix  SMTP server response code when a	remote
	      SMTP client request is blocked  by  the  reject_rbl_client,  re-
	      ject_rhsbl_client,	reject_rhsbl_reverse_client,	   re-
	      ject_rhsbl_sender	or reject_rhsbl_recipient restriction.

       non_fqdn_reject_code (504)
	      The numerical Postfix SMTP server	reply code when	a  client  re-
	      quest  is	 rejected  by  the  reject_non_fqdn_helo_hostname, re-
	      ject_non_fqdn_sender or reject_non_fqdn_recipient	restriction.

       plaintext_reject_code (450)
	      The numerical Postfix SMTP server	response code when  a  request
	      is rejected by the reject_plaintext_session restriction.

       reject_code (554)
	      The  numerical  Postfix  SMTP server response code when a	remote
	      SMTP client request is rejected by the "reject" restriction.

       relay_domains_reject_code (554)
	      The numerical Postfix SMTP server	response code  when  a	client
	      request  is  rejected by the reject_unauth_destination recipient
	      restriction.

       unknown_address_reject_code (450)
	      The numerical response code when the Postfix SMTP	server rejects
	      a	sender or recipient address because its	domain is unknown.

       unknown_client_reject_code (450)
	      The  numerical  Postfix  SMTP server response code when a	client
	      without valid address <=>	name mapping is	rejected  by  the  re-
	      ject_unknown_client_hostname restriction.

       unknown_hostname_reject_code (450)
	      The  numerical  Postfix SMTP server response code	when the host-
	      name specified with the HELO or EHLO command is rejected by  the
	      reject_unknown_helo_hostname restriction.

       Available in Postfix version 2.0	and later:

       default_rbl_reply (see 'postconf	-d' output)
	      The  default Postfix SMTP	server response	template for a request
	      that is rejected by an RBL-based restriction.

       multi_recipient_bounce_reject_code (550)
	      The numerical Postfix SMTP server	response code  when  a	remote
	      SMTP  client  request  is	 blocked  by  the reject_multi_recipi-
	      ent_bounce restriction.

       rbl_reply_maps (empty)
	      Optional lookup tables with RBL response templates.

       Available in Postfix version 2.6	and later:

       access_map_defer_code (450)
	      The numerical Postfix SMTP server	response code for an access(5)
	      map "defer" action, including "defer_if_permit" or "defer_if_re-
	      ject".

       reject_tempfail_action (defer_if_permit)
	      The Postfix SMTP server's	action when a reject-type  restriction
	      fails due	to a temporary error condition.

       unknown_helo_hostname_tempfail_action ($reject_tempfail_action)
	      The  Postfix SMTP	server's action	when reject_unknown_helo_host-
	      name fails due to	a temporary error condition.

       unknown_address_tempfail_action ($reject_tempfail_action)
	      The Postfix SMTP server's	action when  reject_unknown_sender_do-
	      main  or reject_unknown_recipient_domain fail due	to a temporary
	      error condition.

MISCELLANEOUS CONTROLS
       config_directory	(see 'postconf -d' output)
	      The default location of the Postfix main.cf and  master.cf  con-
	      figuration files.

       daemon_timeout (18000s)
	      How  much	time a Postfix daemon process may take to handle a re-
	      quest before it is terminated by a built-in watchdog timer.

       command_directory (see 'postconf	-d' output)
	      The location of all postfix administrative commands.

       double_bounce_sender (double-bounce)
	      The sender address of postmaster notifications that  are	gener-
	      ated by the mail system.

       ipc_timeout (3600s)
	      The  time	limit for sending or receiving information over	an in-
	      ternal communication channel.

       mail_name (Postfix)
	      The mail system name that	is displayed in	Received: headers,  in
	      the SMTP greeting	banner,	and in bounced mail.

       mail_owner (postfix)
	      The  UNIX	 system	 account  that owns the	Postfix	queue and most
	      Postfix daemon processes.

       max_idle	(100s)
	      The maximum amount of time that an idle Postfix  daemon  process
	      waits for	an incoming connection before terminating voluntarily.

       max_use (100)
	      The maximal number of incoming connections that a	Postfix	daemon
	      process will service before terminating voluntarily.

       myhostname (see 'postconf -d' output)
	      The internet hostname of this mail system.

       mynetworks (see 'postconf -d' output)
	      The list of "trusted" remote SMTP	clients	that have more	privi-
	      leges than "strangers".

       myorigin	($myhostname)
	      The  domain  name	that locally-posted mail appears to come from,
	      and that locally posted mail is delivered	to.

       process_id (read-only)
	      The process ID of	a Postfix command or daemon process.

       process_name (read-only)
	      The process name of a Postfix command or daemon process.

       queue_directory (see 'postconf -d' output)
	      The location of the Postfix top-level queue directory.

       recipient_delimiter (empty)
	      The set of characters that can separate a	user name from its ex-
	      tension  (example:  user+foo),  or a .forward file name from its
	      extension	(example: .forward+foo).

       smtpd_banner ($myhostname ESMTP $mail_name)
	      The text that follows the	220 status code	in the	SMTP  greeting
	      banner.

       syslog_facility (mail)
	      The syslog facility of Postfix logging.

       syslog_name (see	'postconf -d' output)
	      A	 prefix	 that  is  prepended  to  the  process	name in	syslog
	      records, so that,	for example, "smtpd" becomes "prefix/smtpd".

       Available in Postfix version 2.2	and later:

       smtpd_forbidden_commands	(CONNECT, GET, POST)
	      List of commands that cause the Postfix SMTP server  to  immedi-
	      ately terminate the session with a 221 code.

       Available in Postfix version 2.5	and later:

       smtpd_client_port_logging (no)
	      Enable logging of	the remote SMTP	client port in addition	to the
	      hostname and IP address.

       Available in Postfix 3.3	and later:

       service_name (read-only)
	      The master.cf service name of a Postfix daemon process.

       Available in Postfix 3.4	and later:

       smtpd_reject_footer_maps	(empty)
	      Lookup tables, indexed by	the complete Postfix SMTP  server  4xx
	      or 5xx response, with reject footer templates.

SEE ALSO
       anvil(8), connection/rate limiting
       cleanup(8), message canonicalization
       tlsmgr(8), TLS session and PRNG management
       trivial-rewrite(8), address resolver
       verify(8), address verification service
       postconf(5), configuration parameters
       master(5), generic daemon options
       master(8), process manager
       postlogd(8), Postfix logging
       syslogd(8), system logging

README FILES
       Use  "postconf readme_directory"	or "postconf html_directory" to	locate
       this information.
       ADDRESS_CLASS_README, blocking unknown hosted or	relay recipients
       ADDRESS_REWRITING_README, Postfix address manipulation
       BDAT_README, Postfix CHUNKING support
       FILTER_README, external after-queue content filter
       LOCAL_RECIPIENT_README, blocking	unknown	local recipients
       MILTER_README, before-queue mail	filter applications
       SMTPD_ACCESS_README, built-in access policies
       SMTPD_POLICY_README, external policy server
       SMTPD_PROXY_README, external before-queue content filter
       SASL_README, Postfix SASL howto
       TLS_README, Postfix STARTTLS howto
       VERP_README, Postfix XVERP extension
       XCLIENT_README, Postfix XCLIENT extension
       XFORWARD_README,	Postfix	XFORWARD extension

LICENSE
       The Secure Mailer license must be distributed with this software.

AUTHOR(S)
       Wietse Venema
       IBM T.J.	Watson Research
       P.O. Box	704
       Yorktown	Heights, NY 10598, USA

       Wietse Venema
       Google, Inc.
       111 8th Avenue
       New York, NY 10011, USA

       SASL support originally by:
       Till Franke
       SuSE Rhein/Main AG
       65760 Eschborn, Germany

       TLS support originally by:
       Lutz Jaenicke
       BTU Cottbus
       Allgemeine Elektrotechnik
       Universitaetsplatz 3-4
       D-03044 Cottbus,	Germany

       Revised TLS support by:
       Victor Duchovni
       Morgan Stanley

								      SMTPD(8)

NAME | SYNOPSIS | DESCRIPTION | SECURITY | STANDARDS | DIAGNOSTICS | CONFIGURATION PARAMETERS | COMPATIBILITY CONTROLS | ADDRESS REWRITING CONTROLS | BEFORE-SMTPD PROXY AGENT | AFTER QUEUE EXTERNAL CONTENT INSPECTION CONTROLS | BEFORE QUEUE EXTERNAL CONTENT INSPECTION CONTROLS | BEFORE QUEUE MILTER CONTROLS | GENERAL CONTENT INSPECTION CONTROLS | EXTERNAL CONTENT INSPECTION CONTROLS | SASL AUTHENTICATION CONTROLS | STARTTLS SUPPORT CONTROLS | OBSOLETE STARTTLS CONTROLS | SMTPUTF8 CONTROLS | VERP SUPPORT CONTROLS | TROUBLE SHOOTING CONTROLS | KNOWN VERSUS UNKNOWN RECIPIENT CONTROLS | RESOURCE AND RATE CONTROLS | TARPIT CONTROLS | ACCESS POLICY DELEGATION CONTROLS | ACCESS CONTROLS | SENDER AND RECIPIENT ADDRESS VERIFICATION CONTROLS | ACCESS CONTROL RESPONSES | MISCELLANEOUS CONTROLS | SEE ALSO | README FILES | LICENSE | AUTHOR(S)

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=smtpd&sektion=8&manpath=FreeBSD+12.2-RELEASE+and+Ports>

home | help