Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
SMP_REP_ZONE_MAN_PASS(8)	   SMP_UTILS	      SMP_REP_ZONE_MAN_PASS(8)

NAME
       smp_rep_zone_man_pass - invoke REPORT ZONE MANAGER PASSWORD function

SYNOPSIS
       smp_rep_zone_man_pass	[--fpass=FP]	[--help]   [--hex]   [--inter-
       face=PARAMS] [--phex] [--raw] [--report=RT] [--sa=SAS_ADDR] [--verbose]
       [--version] SMP_DEVICE[,N]

DESCRIPTION
       Sends  a	SAS Serial Management Protocol (SMP) REPORT ZONE MANAGER PASS-
       WORD function requests to an SMP	target.	The SMP	target	is  identified
       by  the	SMP_DEVICE  and	the --sa=SAS_ADDR. Depending on	the interface,
       the SAS_ADDR may	be deduced from	the SMP_DEVICE.	The mpt	interface uses
       SMP_DEVICE  to  identify	 a  HBA	(an SMP	initiator) and needs the addi-
       tional ,N to differentiate between HBAs if there	are multiple present.

OPTIONS
       Mandatory arguments to long options are mandatory for short options  as
       well.

       -F, --fpass=FP
	      where  FP	is the name of a file which the	password will be writ-
	      ten to.  The default action (in the absence of this  option)  is
	      to write the password to stdout.

       -h, --help
	      output the usage message then exit.

       -H, --hex
	      output the response (less	the CRC	field) in hexadecimal. To only
	      see the password in hexadecimal use the --phex option.

       -I, --interface=PARAMS
	      interface	specific parameters. In	this case  "interface"	refers
	      to  the  path through the	operating system to the	SMP initiator.
	      See the smp_utils	man page for more information.

       -p, --phex
	      Output the password in comma separated hexadecimal bytes.	In the
	      absence  of  this	 option	 the  password is output in ASCII sur-
	      rounded by single	quotes.	 Note the hexadecimal bytes are	output
	      with a hex indication (i.e. there	is nos leading "0x" nor	trail-
	      ing "h").

       -r, --raw
	      send the response	(less the CRC field) to	stdout in binary.  All
	      error messages are sent to stderr.

       -R, --report=RT
	      set  the	'report	 type'	field  in the SMP request. RT may take
	      these values: 0 for report the  current  zone  manager  password
	      (default);  1  is	 reserved; 2 for report	the saved zone manager
	      password;	3 for report the default zone manager password.

       -s, --sa=SAS_ADDR
	      specifies	the SAS	address	of the SMP target device. The mpt  in-
	      terface needs this option	and it will typically be an expander's
	      SAS address. The SAS_ADDR	is in decimal but most	SAS  addresses
	      are  shown  in hexadecimal.  To give a number in hexadecimal ei-
	      ther prefix it with '0x' or put a	trailing 'h' on	it.

       -v, --verbose
	      increase the verbosity of	 the  output.  Can  be	used  multiple
	      times.

       -V, --version
	      print the	version	string and then	exit.

CONFORMING TO
       The SMP REPORT ZONE MANAGER PASSWORD function was introduced in SAS-2 .

AUTHORS
       Written by Douglas Gilbert.

REPORTING BUGS
       Report bugs to <dgilbert	at interlog dot	com>.

COPYRIGHT
       Copyright (C) 2011 Douglas Gilbert
       This  software is distributed under a FreeBSD license. There is NO war-
       ranty; not even for MERCHANTABILITY or FITNESS FOR  A  PARTICULAR  PUR-
       POSE.

SEE ALSO
       smp_utils, smp_conf_zone_man_pass, smp_zone_lock(smp_utils)

smp_utils-0.96			   May 2011	      SMP_REP_ZONE_MAN_PASS(8)

NAME | SYNOPSIS | DESCRIPTION | OPTIONS | CONFORMING TO | AUTHORS | REPORTING BUGS | COPYRIGHT | SEE ALSO

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=smp_rep_zone_man_pass&sektion=8&manpath=FreeBSD+13.0-RELEASE+and+Ports>

home | help