Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
SMP_REP_MANUFACTURER(8)		   SMP_UTILS	       SMP_REP_MANUFACTURER(8)

NAME
       smp_rep_manufacturer - invoke REPORT MANUFACTURER INFORMATION SMP func-
       tion

SYNOPSIS
       smp_rep_manufacturer  [--help]  [--hex]	[--interface=PARAMS]   [--raw]
       [--sa=SAS_ADDR] [--verbose] [--version] [--zero]	SMP_DEVICE[,N]

DESCRIPTION
       Sends a SAS Serial Management Protocol (SMP) REPORT MANUFACTURER	INFOR-
       MATION function request to an SMP target. The SMP target	is  identified
       by  the	SMP_DEVICE  and	 the SAS_ADDR. Depending on the	interface, the
       SAS_ADDR	may be deduced from the	SMP_DEVICE.  The  mpt  interface  uses
       SMP_DEVICE  to  identify	 a  HBA	(an SMP	initiator) and needs the addi-
       tional ,N to differentiate between HBAs if there	are multiple present.

OPTIONS
       Mandatory arguments to long options are mandatory for short options  as
       well.

       -h, --help
	      output the usage message then exit.

       -H, --hex
	      output the response (less	the CRC	field) in hexadecimal.

       -I, --interface=PARAMS
	      interface	 specific  parameters. In this case "interface"	refers
	      to the path through the operating	system to the  SMP  initiator.
	      See the smp_utils	man page for more information.

       -r, --raw
	      send  the	response (less the CRC field) to stdout	in binary. All
	      error messages are sent to stderr.

       -s, --sa=SAS_ADDR
	      specifies	the SAS	address	of the SMP  target  device.  Typically
	      this  is	an  expander.  This  option  may  not be needed	if the
	      SMP_DEVICE has the target's SAS address within it. The  SAS_ADDR
	      is  in  decimal but most SAS addresses are shown in hexadecimal.
	      To give a	number in hexadecimal either prefix it	with  '0x'  or
	      put a trailing 'h' on it.

       -v, --verbose
	      increase the verbosity of	the output. Can	be used	multiple times

       -V, --version
	      print the	version	string and then	exit.

       -z, --zero
	      zero the Allocated Response Length field in the request. This is
	      required for strict  SAS-1.1  compliance.	 However  this	option
	      should  not  be  given  in  SAS-2	 and  later; if	it is given an
	      abridged response	may result.

CONFORMING TO
       The SMP REPORT MANUFACTURER function  was  introduced  in  SAS-1,  with
       small  additions	 in SAS-1.1 . This function remains unaltered in SAS-2
       and SPL-1.

AUTHORS
       Written by Douglas Gilbert.

REPORTING BUGS
       Report bugs to <dgilbert	at interlog dot	com>.

COPYRIGHT
       Copyright (C) 2006-2011 Douglas Gilbert
       This software is	distributed under a FreeBSD license. There is NO  war-
       ranty;  not  even  for MERCHANTABILITY or FITNESS FOR A PARTICULAR PUR-
       POSE.

SEE ALSO
       smp_utils, smp_discover(smp_utils)

smp_utils-0.96			   May 2011	       SMP_REP_MANUFACTURER(8)

NAME | SYNOPSIS | DESCRIPTION | OPTIONS | CONFORMING TO | AUTHORS | REPORTING BUGS | COPYRIGHT | SEE ALSO

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=smp_rep_manufacturer&sektion=8&manpath=FreeBSD+12.1-RELEASE+and+Ports>

home | help