Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
SMOKEPING_CONFIG(5)		   SmokePing		   SMOKEPING_CONFIG(5)

NAME
       smokeping_config	- Reference for	the SmokePing Config File

OVERVIEW
       SmokePing takes its configuration from a	single central configuration
       file.  Its location must	be hardcoded in	the smokeping script and
       smokeping.cgi.

       The contents of this manual is generated	directly from the
       configuration file parser.

       The Parser for the Configuration	file is	written	using David Schweikers
       Config::Grammar module. Read all	about it in Config::Grammar.

       The Configuration file has a tree-like structure	with section headings
       at various levels. It also contains variable assignments	and tables.

       Warning:	this manual is rather long. See	smokeping_examples for simple
       configuration examples.

REFERENCE
   GENERAL SYNTAX
       The text	below describes	the general syntax of the SmokePing
       configuration file.  It was copied from the Config::Grammar
       documentation.

       '#' denotes a comment up	to the end-of-line, empty lines	are allowed
       and space at the	beginning and end of lines is trimmed.

       '\' at the end of the line marks	a continued line on the	next line. A
       single space will be inserted between the concatenated lines.

       '@include filename' is used to include another file.

       '@define	a some value' will replace all occurences of 'a' in the
       following text with 'some value'.

       Fields in tables	that contain white space can be	enclosed in either "'"
       or """.	Whitespace can also be escaped with "\". Quotes	inside quotes
       are allowed but must be escaped with a backslash	as well.

   SPECIFIC SYNTAX
       The text	below describes	the specific syntax of the SmokePing
       configuration file.

   *** General *** (mandatory section)
       General configuration values valid for the whole	SmokePing setup.

       The following variables can be set in this section:

       owner (mandatory	setting)
	   Name	of the person responsible for this smokeping installation.

       imgcache	(mandatory setting)
	   A directory which is	visible	on your	webserver where	SmokePing can
	   cache graphs.

       imgurl (mandatory setting)
	   Either an absolute URL to the imgcache directory or one relative to
	   the directory where you keep	the SmokePing cgi.

       datadir (mandatory setting)
	   The directory where SmokePing can keep its rrd files.

       dyndir
	   The base directory where SmokePing keeps the	files related to the
	   DYNAMIC function.  This directory must be writeable by the WWW
	   server. It is also used for temporary storage of slave polling
	   results by the master in the	master/slave mode.

	   If this variable is not specified, the value	of "datadir" will be
	   used	instead.

       pagedir
	   Directory to	store static representations of	pages.

       piddir (mandatory setting)
	   The directory where SmokePing keeps its pid when daemonised.

       sendmail
	   Path	to your	sendmail binary. It will be used for sending mails in
	   connection with the support of DYNAMIC addresses.

       offset
	   If you run many instances of	smokeping you may want to prevent them
	   from	hitting	your network all at the	same time. Using the offset
	   parameter you can change the	point in time when the probes are run.
	   Offset is specified in % of total interval, or alternatively	as
	   'random'. I recommend to use	'random'. Note that this does NOT
	   influence the rrds itself, it is just a matter of when data
	   acqusition is initiated.  The default offset	is 'random'.

       smokemail (mandatory setting)
	   Path	to the mail template for DYNAMIC hosts.	This mail template
	   must	contain	keywords of the	form <##keyword##>. There is a sample
	   template included with SmokePing.

       cgiurl (mandatory setting)
	   Complete URL	path of	the SmokePing.cgi

       mailhost
	   Instead of using sendmail, you can specify the name of an smtp
	   server and use perl's Net::SMTP module to send mail (for alerts and
	   DYNAMIC client script). Several comma separated mailhosts can be
	   specified. SmokePing	will try one after the other if	one does not
	   answer for 5	seconds.

       mailuser
	   username on mailhost, SmokePing will	use this user to send mail
	   (Net::SMTP).

       mailpass
	   password of username	on mailhost, SmokePing will use	this password
	   to send mail	(Net::SMTP).

       snpphost
	   If you have a SNPP (Simple Network Pager Protocol) server at	hand,
	   you can have	alerts sent there too. Use the syntax snpp:someaddress
	   to use a snpp address in any	place where you	can use	a mail address
	   otherwhise.

       contact (mandatory setting)
	   Mail	address	of the person responsible for this smokeping
	   installation.

       display_name
	   What	should the master host be called when working in master/slave
	   mode. This is used in the overview graph for	example.

       syslogfacility
	   The syslog facility to use, eg. local0...local7.  Note: syslog
	   logging is only used	if you specify this.

       syslogpriority
	   The syslog priority to use, eg. debug, notice or info.  Default is
	   info.

       concurrentprobes
	   If you use multiple probes or multiple instances of the same	probe
	   and you want	them to	run concurrently in separate processes,	set
	   this	to 'yes'. This gives you the possibility to specify probe-
	   specific step and offset parameters (see the	'Probes' section) for
	   each	probe and makes	the probes unable to block each	other in cases
	   of service outages. The default is 'yes', but if you	for some
	   reason want the old behaviour you can set this to 'no'.

       changeprocessnames
	   When	using 'concurrentprobes' (see above), this controls whether
	   the probe subprocesses should change	their argv string to indicate
	   their probe in the process name.  If	set to 'yes' (the default),
	   the probe name will be appended to the process name as '[probe]',
	   eg.	'/usr/bin/smokeping [FPing]'. If you don't like	this
	   behaviour, set this variable	to 'no'.  If 'concurrentprobes'	is not
	   set to 'yes', this variable has no effect.

	   Default value: changeprocessnames = yes

       tmail
	   Path	to your	tSmoke HTML mail template file.	See the	tSmoke
	   documentation for details.

       changecgiprogramname
	   Usually the Smokeping CGI tries to log any possible errors with an
	   extended program name that includes the IP address of the remote
	   client for easier debugging.	If this	variable is set	to 'no', the
	   program name	will not be modified. The only reason you would	want
	   this	is if you have a very old version of the CGI::Carp module. See
	   the installation document for details.

	   Default value: changecgiprogramname = yes

       linkstyle
	   How the CGI self-referring links are	created. The possible values
	   are

	   absolute
	       Full hostname and path derived from the 'cgiurl'	variable

	       <a href="http://hostname/path/smokeping.cgi?foo=bar">

	   relative
	       Only the	parameter part is specified

	       <a href="?foo=bar">

	   original
	       The way the links were generated	before Smokeping version
	       2.0.4: no hostname, only	the path

	       <a href="/path/smokeping.cgi?foo=bar">

	   The default is "relative", which hopefully works for	everybody.

	   Default value: linkstyle = relative

       precreateperms
	   If this variable is set, the	Smokeping daemon will create its
	   directory hierarchy under 'dyndir' (the CGI-writable	tree) at
	   startup with	the specified directory	permission bits. The value is
	   interpreted as an octal value, eg. 775 for rwxrwxr-x	etc.

	   If unset, the directories will be created dynamically with umask
	   022.

	   Example: precreateperms = 2755

   *** Database	*** (mandatory section)
       Describes the properties	of the round robin database for	storing	the
       SmokePing data. Note that it is not possible to edit existing RRDs by
       changing	the entries in the cfg file.

       The following variables can be set in this section:

       step (mandatory setting)
	   Duration of the base	operation interval of SmokePing	in seconds.
	   SmokePing will venture out every step seconds to ping your target
	   hosts.  If 'concurrentprobes' is set	to 'yes' (see above), this
	   variable can	be overridden by each probe. Note that the step	in the
	   RRD files is	fixed when they	are originally generated, and if you
	   change the step parameter afterwards, you'll	have to	delete the old
	   RRD files or	somehow	convert	them.

       pings (mandatory	setting)
	   How many pings should be sent to each target. Suggested: 20 pings.
	   Minimum value: 3 pings.  This can be	overridden by each probe. Some
	   probes (those derived from basefork.pm, ie. most except the FPing
	   variants) will even let this	be overridden target-specifically.
	   Note	that the number	of pings in the	RRD files is fixed when	they
	   are originally generated, and if you	change this parameter
	   afterwards, you'll have to delete the old RRD files or somehow
	   convert them.

       This section also contains a table describing the setup of the
       SmokePing database. Below are reasonable	defaults. Only change them if
       you know	rrdtool	and its	workings. Each row in the table	describes one
       RRA.

	# cons	 xff steps rows
	AVERAGE	 0.5   1   1008
	AVERAGE	 0.5  12   4320
	    MIN	 0.5  12   4320
	    MAX	 0.5  12   4320
	AVERAGE	 0.5 144    720
	    MAX	 0.5 144    720
	    MIN	 0.5 144    720

       column 0
	   Consolidation method.

       column 1
	   What	part of	the consolidated intervals must	be known to warrant a
	   known entry.

       column 2
	   How many steps to consolidate into for each RRA entry.

       column 3
	   How many rows this RRA should have.

   *** Presentation ***	(mandatory section)
       Defines how the SmokePing data should be	presented.

       The following variables can be set in this section:

       template	(mandatory setting)
	   The webpage template	must contain keywords of the form
	   <##keyword##>. There	is a sample template included with SmokePing;
	   use it as the basis for your	experiments. Default template contains
	   a pointer to	the SmokePing counter and homepage. I would be glad if
	   you would not remove	this as	it gives me an indication as to	how
	   widely used the tool	is.

       charset
	   By default, SmokePing assumes the 'utf-8' character set. If you use
	   something else, this	is the place to	speak up.

       htmltitle
	   By default, SmokePing will render the title of the graph in the
	   image, when set to 'yes' the	title is inserted in the html page.

       graphborders
	   By default, SmokePing will render gray border on a light gray
	   background, if set to 'no' borders will be hidden and the
	   background and canvas will be transparent.

       The following sections are valid	on level 1:

       +overview (mandatory section)
	   The Overview	section	defines	how the	Overview graphs	should look.

	   The following variables can be set in this section:

	   width (mandatory setting)
	       Width of	the Overview Graphs.

	   height (mandatory setting)
	       Height of the Overview Graphs.

	   range
	       How much	time should be depicted	in the Overview	graph. Time
	       must be specified as a number followed by a letter which
	       specifies the unit of time. Known units are: seconds, minutes,
	       hours, ddays, weeks, years.

	   max_rtt
	       Any roundtrip time larger than this value will cropped in the
	       overview	graph

	   median_color
	       By default the median line is drawn in red. Override it here
	       with a hex color	in the format rrggbb. Note that	if you work
	       with slaves, the	slaves medians will be drawn in	the slave
	       color in	the overview graph.

	   strftime
	       Use posix strftime to format the	timestamp in the left hand
	       lower corner of the overview graph

       +detail (mandatory section)
	   The following variables can be set in this section:

	   width (mandatory setting)
	       How many	pixels wide should detail graphs be

	   height (mandatory setting)
	       How many	pixels high should detail graphs be

	   loss_background
	       Should the graphs be shown with a background showing loss data
	       for emphasis (yes/no)?

	       If this option is enabled, uptime data is no longer displayed
	       in the graph background.

	   logarithmic
	       should the graphs be shown in a logarithmic scale (yes/no)

	   unison_tolerance
	       if a graph is more than this factor of the median 'max' it
	       drops out of the	unison scaling algorithm. A factor of two
	       would mean that any graph with a	max either less	than half or
	       more than twice the median 'max'	will be	dropped	from unison
	       scaling

	   max_rtt
	       Any roundtrip time larger than this value will cropped in the
	       detail graph

	   strftime
	       Use posix strftime to format the	timestamp in the left hand
	       lower corner of the detail graph

	   nodata_color
	       Paint the graph background in a special color when there	is no
	       data for	this period because smokeping has not been running
	       (#rrggbb)

	   The detailed	display	can contain several graphs of different
	   resolution. In this table you can specify the resolution of each
	   graph.

	   Example:

	    "Last 3 Hours"    3h
	    "Last 30 Hours"   30h
	    "Last 10 Days"    10d
	    "Last 400 Days"   400d

	   column 0
	       Description of the particular resolution.

	   column 1
	       How much	time should be depicted. The format is the same	as for
	       the age	parameter of the Overview section.

	   The following sections are valid on level 2:

	   ++loss_colors
	       In the Detail view, the color of	the median line	depends	the
	       amount of lost packets. SmokePing comes with a reasonable
	       default setting,	but you	may choose to disagree.	The table
	       below lets you specify your own coloring.

	       Example:

		Loss Color   Legend
		1    00ff00    "<1"
		3    0000ff    "<3"
		1000 ff0000    ">=3"

	       column 0
		   Activate when the number of losst pings is larger or	equal
		   to this number

	       column 1
		   Color for this range.

	       column 2
		   Description for this	range.

	   ++uptime_colors
	       When monitoring a host with DYNAMIC addressing, SmokePing will
	       keep track of how long the machine is able to keep the same IP
	       address.	This time is plotted as	a color	in the graphs
	       background. SmokePing comes with	a reasonable default setting,
	       but you may choose to disagree. The table below lets you
	       specify your own	coloring

	       Example:

		# Uptime      Color	Legend
		3600	      00ff00   "<1h"
		86400	      0000ff   "<1d"
		604800	      ff0000   "<1w"
		1000000000000 ffff00   ">1w"

	       Uptime is in days!

	       column 0
		   Activate when uptime	in days	is larger of equal to this
		   number

	       column 1
		   Color for this uptime range.

	       column 2
		   Description for this	range.

       +charts
	   The SmokePing Charts	feature	allow you to have Top X	lists created
	   according to	various	criteria.

	   Each	type of	Chart must live	in its own subsection.

	    + charts
	    menu = Charts
	    title = The	most interesting destinations
	    ++ median
	    sorter = Median(entries=>10)
	    title = Sorted by Median Roundtrip Time
	    menu = Top Median RTT
	    format = Median RTT	%e s

	   The following variables can be set in this section:

	   menu	(mandatory setting)
	       Menu entry for the Charts Section.

	   title (mandatory setting)
	       Page title for the Charts Section.

	   The following sections are valid on level 2:

	   ++/[-_0-9a-zA-Z]+/
	       The following variables can be set in this section:

	       menu (mandatory setting)
		   Menu	entry

	       title (mandatory	setting)
		   Page	title

	       sorter (mandatory setting)
		   sorter for this charts sections

	       format
		   sprintf format string to format curent value

       +multihost
	   Settings for	the multihost graphs. At the moment this is only used
	   for the color setting. Check	the documentation on the host property
	   of the target section for more.

	   The following variables can be set in this section:

	   colors
	       Space separated list of colors for multihost graphs

	       Example:	colors = ff0000	00ff00 0000ff

       +hierarchies
	   Provide an alternative presentation hierarchy for your smokeping
	   data. After setting up a hierarchy in this section. You can use it
	   in each tagets parent property. A drop-down menu in the smokeping
	   website lets	the user switch	presentation hierarchy.

	   The following sections are valid on level 2:

	   ++/[-_0-9a-zA-Z]+/
	       Identifier of the hierarchie. Use this as prefix	in the targets
	       parent property

	       The following variables can be set in this section:

	       title (mandatory	setting)
		   Title for this hierarchy

   *** Probes *** (mandatory section)
       The Probes Section configures Probe modules. Probe modules integrate an
       external	ping command into SmokePing. Check the documentation of	each
       module for more information about it.

       The following sections are valid	on level 1:

       +/[-_0-9a-zA-Z]+/
	   Each	module can take	specific configuration information from	this
	   area. The jumble of letters above is	a regular expression defining
	   legal module	names.

	   See the documentation of each module	for details about its
	   variables.

	   The grammar of this section is dynamically modified based on	its
	   name.

	   The following sections are valid on level 2:

	   ++/[-_0-9a-zA-Z]+/
	       You can define multiple instances of the	same probe with
	       subsections.  These instances can have different	values for
	       their variables,	so you can eg. have one	instance of the	FPing
	       probe with packet size 1000 and step 300	and another instance
	       with packet size	64 and step 30.	 The name of the subsection
	       determines what the probe will be called, so you	can write
	       descriptive names for the probes.

	       If there	are any	subsections defined, the main section for this
	       probe will just provide default parameter values	for the	probe
	       instances, ie.  it will not become a probe instance itself.

	       The example above would be written like this:

		*** Probes ***

		+ FPing
		# this value is	common for the two subprobes
		binary = /usr/bin/fping

		++ FPingLarge
		packetsize = 1000
		step = 300

		++ FPingSmall
		packetsize = 64
		step = 30

	   Dynamical grammar changes for example instances of this section:

	   AnotherCurl:	(See the separate module documentation for details
	   about each variable.)
	       The following new variables are valid:

	       binary
		   see above

		   Default value: binary = /usr/bin/curl

	       forks
		   see above

		   Default value: forks	= 5

	       offset
		   see above

	       step
		   see above

	       agent
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       extraargs
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       extrare
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   Default value: extrare = / /

	       follow_redirects
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   Default value: follow_redirects = no

	       include_redirects
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   Default value: include_redirects = no

	       insecure_ssl
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       interface
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       pings
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       ssl2
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       timeout
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   Default value: timeout = 10

	       urlformat
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   This	variable dynamically modifies the grammar based	on its
		   value.

	       write_out
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       Syntax changes for subsection /[-_0-9a-zA-Z]+/

		   The following new variables are valid:

		   binary
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: binary = /usr/bin/curl

		   forks
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: forks = 5

		   offset
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   step
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   agent
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   extraargs
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   extrare
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: extrare =	/ /

		   follow_redirects
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: follow_redirects = no

		   include_redirects
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: include_redirects	= no

		   insecure_ssl
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   interface
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   pings
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   ssl2
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   timeout
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: timeout =	10

		   urlformat
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   write_out
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

	       (End of dynamical grammar changes for example instance
	       "AnotherCurl".)

	   AnotherDNS: (See the	separate module	documentation for details
	   about each variable.)
	       The following new variables are valid:

	       forks
		   see above

		   Default value: forks	= 5

	       offset
		   see above

	       step
		   see above

	       authoritative
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       ipversion
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   Default value: ipversion = 4

	       lookup
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       mininterval
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   Default value: mininterval =	0.5

	       pings
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       port
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   Default value: port = 53

	       protocol
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   Default value: protocol = udp

	       recordtype
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   Default value: recordtype = A

	       require_answers
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       require_noerror
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       timeout
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   Default value: timeout = 5

	       Syntax changes for subsection /[-_0-9a-zA-Z]+/

		   The following new variables are valid:

		   forks
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: forks = 5

		   offset
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   step
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   authoritative
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   ipversion
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: ipversion	= 4

		   lookup
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   mininterval
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: mininterval = 0.5

		   pings
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   port
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: port = 53

		   protocol
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: protocol = udp

		   recordtype
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: recordtype = A

		   require_answers
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   require_noerror
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   timeout
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: timeout =	5

	       (End of dynamical grammar changes for example instance
	       "AnotherDNS".)

	   AnotherSSH: (See the	separate module	documentation for details
	   about each variable.)
	       The following new variables are valid:

	       forks
		   see above

		   Default value: forks	= 5

	       offset
		   see above

	       step
		   see above

	       greeting
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   Default value: greeting = SSH-Latency-Measurement-Sorry-
		   for-this-logmessage

	       interval
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   Default value: interval = established

	       mininterval
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   Default value: mininterval =	0.5

	       pings
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       port
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   Default value: port = 22

	       timeout
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   Default value: timeout = 5

	       Syntax changes for subsection /[-_0-9a-zA-Z]+/

		   The following new variables are valid:

		   forks
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: forks = 5

		   offset
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   step
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   greeting
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: greeting = SSH-Latency-Measurement-
		       Sorry-for-this-logmessage

		   interval
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: interval = established

		   mininterval
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: mininterval = 0.5

		   pings
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   port
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: port = 22

		   timeout
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: timeout =	5

	       (End of dynamical grammar changes for example instance
	       "AnotherSSH".)

	   CiscoRTTMonDNS: (See	the separate module documentation for details
	   about each variable.)
	       The following new variables are valid:

	       forks
		   see above

		   Default value: forks	= 5

	       offset
		   see above

	       step
		   see above

	       ioshost
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   This	variable dynamically modifies the grammar based	on its
		   value.

	       iosint
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       name
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   This	variable dynamically modifies the grammar based	on its
		   value.

	       pings
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       timeout
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   Default value: timeout = 15

	       Syntax changes for subsection /[-_0-9a-zA-Z]+/

		   The following new variables are valid:

		   forks
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: forks = 5

		   offset
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   step
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   ioshost
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   iosint
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   name
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   pings
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   timeout
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: timeout =	15

	       (End of dynamical grammar changes for example instance
	       "CiscoRTTMonDNS".)

	   CiscoRTTMonEchoICMP:	(See the separate module documentation for
	   details about each variable.)
	       The following new variables are valid:

	       forks
		   see above

		   Default value: forks	= 5

	       offset
		   see above

	       step
		   see above

	       ioshost
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   This	variable dynamically modifies the grammar based	on its
		   value.

	       iosint
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       packetsize
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   Default value: packetsize = 56

	       pings
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       timeout
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   Default value: timeout = 15

	       tos (This variable can be overridden target-specifically	in the
		   Targets section.)

	       vrf (This variable can be overridden target-specifically	in the
		   Targets section.)

	       Syntax changes for subsection /[-_0-9a-zA-Z]+/

		   The following new variables are valid:

		   forks
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: forks = 5

		   offset
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   step
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   ioshost
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   iosint
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   packetsize
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: packetsize = 56

		   pings
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   timeout
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: timeout =	15

		   tos This variable inherits its value	from the parent
		       section if nothing is specified here.

		   vrf This variable inherits its value	from the parent
		       section if nothing is specified here.

	       (End of dynamical grammar changes for example instance
	       "CiscoRTTMonEchoICMP".)

	   CiscoRTTMonTcpConnect: (See the separate module documentation for
	   details about each variable.)
	       The following new variables are valid:

	       forks
		   see above

		   Default value: forks	= 5

	       offset
		   see above

	       step
		   see above

	       ioshost
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   This	variable dynamically modifies the grammar based	on its
		   value.

	       iosint
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       pings
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       port
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   Default value: port = 80

	       timeout
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   Default value: timeout = 15

	       tos (This variable can be overridden target-specifically	in the
		   Targets section.)

	       Syntax changes for subsection /[-_0-9a-zA-Z]+/

		   The following new variables are valid:

		   forks
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: forks = 5

		   offset
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   step
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   ioshost
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   iosint
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   pings
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   port
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: port = 80

		   timeout
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: timeout =	15

		   tos This variable inherits its value	from the parent
		       section if nothing is specified here.

	       (End of dynamical grammar changes for example instance
	       "CiscoRTTMonTcpConnect".)

	   Curl: (See the separate module documentation	for details about each
	   variable.)
	       The following new variables are valid:

	       binary
		   see above

		   Default value: binary = /usr/bin/curl

	       forks
		   see above

		   Default value: forks	= 5

	       offset
		   see above

	       step
		   see above

	       agent
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       expect
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       extraargs
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       extrare
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   Default value: extrare = / /

	       follow_redirects
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   Default value: follow_redirects = no

	       include_redirects
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   Default value: include_redirects = no

	       insecure_ssl
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       interface
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       pings
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       require_zero_status
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   Default value: require_zero_status =	no

	       ssl2
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       timeout
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   Default value: timeout = 10

	       urlformat
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   This	variable dynamically modifies the grammar based	on its
		   value.

	       Syntax changes for subsection /[-_0-9a-zA-Z]+/

		   The following new variables are valid:

		   binary
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: binary = /usr/bin/curl

		   forks
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: forks = 5

		   offset
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   step
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   agent
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   expect
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   extraargs
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   extrare
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: extrare =	/ /

		   follow_redirects
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: follow_redirects = no

		   include_redirects
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: include_redirects	= no

		   insecure_ssl
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   interface
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   pings
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   require_zero_status
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: require_zero_status = no

		   ssl2
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   timeout
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: timeout =	10

		   urlformat
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

	       (End of dynamical grammar changes for example instance "Curl".)

	   DNS:	(See the separate module documentation for details about each
	   variable.)
	       The following new variables are valid:

	       binary (mandatory setting)
		   see above

	       forks
		   see above

		   Default value: forks	= 5

	       offset
		   see above

	       step
		   see above

	       timeout
		   see above

		   Default value: timeout = 5

	       lookup
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       pings
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       server
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       Syntax changes for subsection /[-_0-9a-zA-Z]+/

		   The following new variables are valid:

		   binary (mandatory setting)
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   forks
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: forks = 5

		   offset
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   step
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   timeout
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: timeout =	5

		   lookup
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   pings
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   server
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

	       (End of dynamical grammar changes for example instance "DNS".)

	   DismanPing: (See the	separate module	documentation for details
	   about each variable.)
	       The following new variables are valid:

	       offset
		   see above

	       pings
		   see above

		   Default value: pings	= 15

	       step
		   see above

	       ownerindex
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       packetsize
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   Default value: packetsize = 56

	       pinghost
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   This	variable dynamically modifies the grammar based	on its
		   value.

	       pingsrc
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       Syntax changes for subsection /[-_0-9a-zA-Z]+/

		   The following new variables are valid:

		   offset
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   pings
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: pings = 15

		   step
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   ownerindex
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   packetsize
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: packetsize = 56

		   pinghost
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   pingsrc
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

	       (End of dynamical grammar changes for example instance
	       "DismanPing".)

	   EchoPing: (See the separate module documentation for	details	about
	   each	variable.)
	       The following new variables are valid:

	       binary
		   see above

		   Default value: binary = /usr/bin/echoping

	       forks
		   see above

		   Default value: forks	= 5

	       offset
		   see above

	       step
		   see above

	       extraopts
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       fill
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       ipversion
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       pings
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       priority
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       size
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       timeout
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   Default value: timeout = 5

	       tos (This variable can be overridden target-specifically	in the
		   Targets section.)

	       udp (This variable can be overridden target-specifically	in the
		   Targets section.)

	       waittime
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       Syntax changes for subsection /[-_0-9a-zA-Z]+/

		   The following new variables are valid:

		   binary
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: binary = /usr/bin/echoping

		   forks
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: forks = 5

		   offset
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   step
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   extraopts
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   fill
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   ipversion
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   pings
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   priority
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   size
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   timeout
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: timeout =	5

		   tos This variable inherits its value	from the parent
		       section if nothing is specified here.

		   udp This variable inherits its value	from the parent
		       section if nothing is specified here.

		   waittime
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

	       (End of dynamical grammar changes for example instance
	       "EchoPing".)

	   EchoPingChargen: (See the separate module documentation for details
	   about each variable.)
	       The following new variables are valid:

	       binary
		   see above

		   Default value: binary = /usr/bin/echoping

	       forks
		   see above

		   Default value: forks	= 5

	       offset
		   see above

	       step
		   see above

	       extraopts
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       fill
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       ipversion
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       pings
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       priority
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       size
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       timeout
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   Default value: timeout = 5

	       tos (This variable can be overridden target-specifically	in the
		   Targets section.)

	       waittime
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       Syntax changes for subsection /[-_0-9a-zA-Z]+/

		   The following new variables are valid:

		   binary
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: binary = /usr/bin/echoping

		   forks
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: forks = 5

		   offset
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   step
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   extraopts
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   fill
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   ipversion
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   pings
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   priority
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   size
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   timeout
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: timeout =	5

		   tos This variable inherits its value	from the parent
		       section if nothing is specified here.

		   waittime
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

	       (End of dynamical grammar changes for example instance
	       "EchoPingChargen".)

	   EchoPingDNS:	(See the separate module documentation for details
	   about each variable.)
	       The following new variables are valid:

	       binary
		   see above

		   Default value: binary = /usr/bin/echoping

	       forks
		   see above

		   Default value: forks	= 5

	       offset
		   see above

	       step
		   see above

	       dns_request
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   This	variable dynamically modifies the grammar based	on its
		   value.

	       dns_tcp
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       dns_type
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   Default value: dns_type = A

	       extraopts
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       ipversion
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       pings
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       plugin
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   Default value: plugin = dns

	       pluginargs
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       priority
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       timeout
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   Default value: timeout = 5

	       tos (This variable can be overridden target-specifically	in the
		   Targets section.)

	       waittime
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       Syntax changes for subsection /[-_0-9a-zA-Z]+/

		   The following new variables are valid:

		   binary
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: binary = /usr/bin/echoping

		   forks
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: forks = 5

		   offset
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   step
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   dns_request
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   dns_tcp
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   dns_type
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: dns_type = A

		   extraopts
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   ipversion
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   pings
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   plugin
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: plugin = dns

		   pluginargs
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   priority
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   timeout
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: timeout =	5

		   tos This variable inherits its value	from the parent
		       section if nothing is specified here.

		   waittime
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

	       (End of dynamical grammar changes for example instance
	       "EchoPingDNS".)

	   EchoPingDiscard: (See the separate module documentation for details
	   about each variable.)
	       The following new variables are valid:

	       binary
		   see above

		   Default value: binary = /usr/bin/echoping

	       forks
		   see above

		   Default value: forks	= 5

	       offset
		   see above

	       step
		   see above

	       extraopts
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       fill
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       ipversion
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       pings
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       priority
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       size
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       timeout
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   Default value: timeout = 5

	       tos (This variable can be overridden target-specifically	in the
		   Targets section.)

	       udp (This variable can be overridden target-specifically	in the
		   Targets section.)

	       waittime
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       Syntax changes for subsection /[-_0-9a-zA-Z]+/

		   The following new variables are valid:

		   binary
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: binary = /usr/bin/echoping

		   forks
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: forks = 5

		   offset
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   step
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   extraopts
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   fill
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   ipversion
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   pings
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   priority
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   size
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   timeout
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: timeout =	5

		   tos This variable inherits its value	from the parent
		       section if nothing is specified here.

		   udp This variable inherits its value	from the parent
		       section if nothing is specified here.

		   waittime
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

	       (End of dynamical grammar changes for example instance
	       "EchoPingDiscard".)

	   EchoPingHttp: (See the separate module documentation	for details
	   about each variable.)
	       The following new variables are valid:

	       binary
		   see above

		   Default value: binary = /usr/bin/echoping

	       forks
		   see above

		   Default value: forks	= 5

	       offset
		   see above

	       step
		   see above

	       accept_redirects
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       extraopts
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       ignore_cache
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       ipversion
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       pings
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       port
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       priority
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       revalidate_data
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       timeout
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   Default value: timeout = 10

	       tos (This variable can be overridden target-specifically	in the
		   Targets section.)

	       url (This variable can be overridden target-specifically	in the
		   Targets section.)

		   Default value: url =	/

	       waittime
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       Syntax changes for subsection /[-_0-9a-zA-Z]+/

		   The following new variables are valid:

		   binary
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: binary = /usr/bin/echoping

		   forks
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: forks = 5

		   offset
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   step
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   accept_redirects
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   extraopts
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   ignore_cache
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   ipversion
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   pings
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   port
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   priority
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   revalidate_data
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   timeout
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: timeout =	10

		   tos This variable inherits its value	from the parent
		       section if nothing is specified here.

		   url This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: url = /

		   waittime
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

	       (End of dynamical grammar changes for example instance
	       "EchoPingHttp".)

	   EchoPingHttps: (See the separate module documentation for details
	   about each variable.)
	       The following new variables are valid:

	       binary
		   see above

		   Default value: binary = /usr/bin/echoping

	       forks
		   see above

		   Default value: forks	= 5

	       offset
		   see above

	       step
		   see above

	       accept_redirects
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       extraopts
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       ignore_cache
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       ipversion
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       pings
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       port
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       priority
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       prot
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   Default value: prot = 443

	       revalidate_data
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       timeout
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   Default value: timeout = 10

	       tos (This variable can be overridden target-specifically	in the
		   Targets section.)

	       url (This variable can be overridden target-specifically	in the
		   Targets section.)

		   Default value: url =	/

	       waittime
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       Syntax changes for subsection /[-_0-9a-zA-Z]+/

		   The following new variables are valid:

		   binary
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: binary = /usr/bin/echoping

		   forks
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: forks = 5

		   offset
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   step
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   accept_redirects
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   extraopts
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   ignore_cache
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   ipversion
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   pings
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   port
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   priority
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   prot
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: prot = 443

		   revalidate_data
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   timeout
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: timeout =	10

		   tos This variable inherits its value	from the parent
		       section if nothing is specified here.

		   url This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: url = /

		   waittime
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

	       (End of dynamical grammar changes for example instance
	       "EchoPingHttps".)

	   EchoPingIcp:	(See the separate module documentation for details
	   about each variable.)
	       The following new variables are valid:

	       binary
		   see above

		   Default value: binary = /usr/bin/echoping

	       forks
		   see above

		   Default value: forks	= 5

	       offset
		   see above

	       step
		   see above

	       extraopts
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       ipversion
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       pings
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       priority
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       timeout
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   Default value: timeout = 5

	       tos (This variable can be overridden target-specifically	in the
		   Targets section.)

	       url (This variable can be overridden target-specifically	in the
		   Targets section.)

		   This	variable dynamically modifies the grammar based	on its
		   value.

	       waittime
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       Syntax changes for subsection /[-_0-9a-zA-Z]+/

		   The following new variables are valid:

		   binary
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: binary = /usr/bin/echoping

		   forks
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: forks = 5

		   offset
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   step
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   extraopts
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   ipversion
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   pings
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   priority
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   timeout
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: timeout =	5

		   tos This variable inherits its value	from the parent
		       section if nothing is specified here.

		   url This variable inherits its value	from the parent
		       section if nothing is specified here.

		   waittime
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

	       (End of dynamical grammar changes for example instance
	       "EchoPingIcp".)

	   EchoPingLDAP: (See the separate module documentation	for details
	   about each variable.)
	       The following new variables are valid:

	       binary
		   see above

		   Default value: binary = /usr/bin/echoping

	       forks
		   see above

		   Default value: forks	= 5

	       offset
		   see above

	       step
		   see above

	       extraopts
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       ipversion
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       ldap_base
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       ldap_request
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       ldap_scope
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       pings
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       plugin
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   Default value: plugin = ldap

	       pluginargs
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       priority
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       timeout
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   Default value: timeout = 5

	       tos (This variable can be overridden target-specifically	in the
		   Targets section.)

	       waittime
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       Syntax changes for subsection /[-_0-9a-zA-Z]+/

		   The following new variables are valid:

		   binary
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: binary = /usr/bin/echoping

		   forks
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: forks = 5

		   offset
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   step
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   extraopts
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   ipversion
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   ldap_base
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   ldap_request
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   ldap_scope
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   pings
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   plugin
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: plugin = ldap

		   pluginargs
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   priority
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   timeout
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: timeout =	5

		   tos This variable inherits its value	from the parent
		       section if nothing is specified here.

		   waittime
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

	       (End of dynamical grammar changes for example instance
	       "EchoPingLDAP".)

	   EchoPingPlugin: (See	the separate module documentation for details
	   about each variable.)
	       The following new variables are valid:

	       binary
		   see above

		   Default value: binary = /usr/bin/echoping

	       forks
		   see above

		   Default value: forks	= 5

	       offset
		   see above

	       step
		   see above

	       extraopts
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       ipversion
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       pings
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       plugin
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   This	variable dynamically modifies the grammar based	on its
		   value.

	       pluginargs
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       priority
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       timeout
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   Default value: timeout = 5

	       tos (This variable can be overridden target-specifically	in the
		   Targets section.)

	       waittime
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       Syntax changes for subsection /[-_0-9a-zA-Z]+/

		   The following new variables are valid:

		   binary
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: binary = /usr/bin/echoping

		   forks
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: forks = 5

		   offset
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   step
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   extraopts
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   ipversion
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   pings
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   plugin
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   pluginargs
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   priority
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   timeout
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: timeout =	5

		   tos This variable inherits its value	from the parent
		       section if nothing is specified here.

		   waittime
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

	       (End of dynamical grammar changes for example instance
	       "EchoPingPlugin".)

	   EchoPingSmtp: (See the separate module documentation	for details
	   about each variable.)
	       The following new variables are valid:

	       binary
		   see above

		   Default value: binary = /usr/bin/echoping

	       forks
		   see above

		   Default value: forks	= 5

	       offset
		   see above

	       step
		   see above

	       extraopts
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       ipversion
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       pings
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       priority
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       timeout
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   Default value: timeout = 5

	       tos (This variable can be overridden target-specifically	in the
		   Targets section.)

	       waittime
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       Syntax changes for subsection /[-_0-9a-zA-Z]+/

		   The following new variables are valid:

		   binary
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: binary = /usr/bin/echoping

		   forks
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: forks = 5

		   offset
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   step
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   extraopts
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   ipversion
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   pings
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   priority
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   timeout
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: timeout =	5

		   tos This variable inherits its value	from the parent
		       section if nothing is specified here.

		   waittime
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

	       (End of dynamical grammar changes for example instance
	       "EchoPingSmtp".)

	   EchoPingWhois: (See the separate module documentation for details
	   about each variable.)
	       The following new variables are valid:

	       binary
		   see above

		   Default value: binary = /usr/bin/echoping

	       forks
		   see above

		   Default value: forks	= 5

	       offset
		   see above

	       step
		   see above

	       extraopts
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       ipversion
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       pings
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       plugin
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   Default value: plugin = whois

	       pluginargs
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       priority
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       timeout
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   Default value: timeout = 5

	       tos (This variable can be overridden target-specifically	in the
		   Targets section.)

	       waittime
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       whois_request
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   This	variable dynamically modifies the grammar based	on its
		   value.

	       Syntax changes for subsection /[-_0-9a-zA-Z]+/

		   The following new variables are valid:

		   binary
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: binary = /usr/bin/echoping

		   forks
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: forks = 5

		   offset
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   step
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   extraopts
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   ipversion
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   pings
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   plugin
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: plugin = whois

		   pluginargs
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   priority
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   timeout
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: timeout =	5

		   tos This variable inherits its value	from the parent
		       section if nothing is specified here.

		   waittime
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   whois_request
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

	       (End of dynamical grammar changes for example instance
	       "EchoPingWhois".)

	   FPing: (See the separate module documentation for details about
	   each	variable.)
	       The following new variables are valid:

	       binary (mandatory setting)
		   see above

	       blazemode
		   see above

	       hostinterval
		   see above

	       mininterval
		   see above

		   Default value: mininterval =	0.01

	       offset
		   see above

	       packetsize
		   see above

	       pings
		   see above

	       protocol
		   see above

		   Default value: protocol = 4

	       sourceaddress
		   see above

	       step
		   see above

	       timeout
		   see above

	       tos see above

	       usestdout
		   see above

	       Syntax changes for subsection /[-_0-9a-zA-Z]+/

		   The following new variables are valid:

		   binary (mandatory setting)
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   blazemode
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   hostinterval
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   mininterval
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: mininterval = 0.01

		   offset
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   packetsize
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   pings
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   protocol
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: protocol = 4

		   sourceaddress
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   step
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   timeout
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   tos see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   usestdout
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

	       (End of dynamical grammar changes for example instance
	       "FPing".)

	   FPing6: (See	the separate module documentation for details about
	   each	variable.)
	       The following new variables are valid:

	       binary (mandatory setting)
		   see above

	       blazemode
		   see above

	       hostinterval
		   see above

	       mininterval
		   see above

		   Default value: mininterval =	0.01

	       offset
		   see above

	       packetsize
		   see above

	       pings
		   see above

	       protocol
		   see above

		   Default value: protocol = 6

	       sourceaddress
		   see above

	       step
		   see above

	       timeout
		   see above

	       tos see above

	       usestdout
		   see above

	       Syntax changes for subsection /[-_0-9a-zA-Z]+/

		   The following new variables are valid:

		   binary (mandatory setting)
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   blazemode
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   hostinterval
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   mininterval
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: mininterval = 0.01

		   offset
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   packetsize
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   pings
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   protocol
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: protocol = 6

		   sourceaddress
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   step
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   timeout
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   tos see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   usestdout
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

	       (End of dynamical grammar changes for example instance
	       "FPing6".)

	   FPingContinuous: (See the separate module documentation for details
	   about each variable.)
	       The following new variables are valid:

	       binary (mandatory setting)
		   see above

	       hostinterval
		   see above

	       offset
		   see above

	       packetsize
		   see above

	       pings
		   see above

	       sourceaddress
		   see above

	       step
		   see above

	       timeout
		   see above

	       tos see above

	       usestdout
		   see above

	       Syntax changes for subsection /[-_0-9a-zA-Z]+/

		   The following new variables are valid:

		   binary (mandatory setting)
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   hostinterval
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   offset
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   packetsize
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   pings
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   sourceaddress
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   step
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   timeout
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   tos see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   usestdout
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

	       (End of dynamical grammar changes for example instance
	       "FPingContinuous".)

	   FTPtransfer:	(See the separate module documentation for details
	   about each variable.)
	       The following new variables are valid:

	       destfile
		   see above

	       forks
		   see above

		   Default value: forks	= 5

	       min_interval
		   see above

		   Default value: min_interval = 1

	       mode (mandatory setting)
		   see above

	       offset
		   see above

	       passwordfile
		   see above

	       srcfile (mandatory setting)
		   see above

	       step
		   see above

	       localaddr
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       passive
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       password
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       pings
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       port
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       timeout (mandatory setting)
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       username
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       Syntax changes for subsection /[-_0-9a-zA-Z]+/

		   The following new variables are valid:

		   destfile
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   forks
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: forks = 5

		   min_interval
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: min_interval = 1

		   mode	(mandatory setting)
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   offset
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   passwordfile
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   srcfile (mandatory setting)
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   step
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   localaddr
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   passive
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   password
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   pings
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   port
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   timeout (mandatory setting)
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   username
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

	       (End of dynamical grammar changes for example instance
	       "FTPtransfer".)

	   IOSPing: (See the separate module documentation for details about
	   each	variable.)
	       The following new variables are valid:

	       binary (mandatory setting)
		   see above

	       forks
		   see above

		   Default value: forks	= 5

	       offset
		   see above

	       packetsize
		   see above

		   Default value: packetsize = 56

	       step
		   see above

	       timeout
		   see above

		   Default value: timeout = 5

	       ioshost
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   This	variable dynamically modifies the grammar based	on its
		   value.

	       iosint
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       iosuser
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       pings
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       Syntax changes for subsection /[-_0-9a-zA-Z]+/

		   The following new variables are valid:

		   binary (mandatory setting)
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   forks
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: forks = 5

		   offset
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   packetsize
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: packetsize = 56

		   step
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   timeout
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: timeout =	5

		   ioshost
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   iosint
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   iosuser
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   pings
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

	       (End of dynamical grammar changes for example instance
	       "IOSPing".)

	   IRTT: (See the separate module documentation	for details about each
	   variable.)
	       The following new variables are valid:

	       binary (mandatory setting)
		   see above

		   Default value: binary = /usr/bin/irtt

	       forks
		   see above

		   Default value: forks	= 5

	       offset
		   see above

	       step
		   see above

	       timeout
		   see above

		   Default value: timeout = 5

	       tmpdir
		   see above

		   Default value: tmpdir = /tmp/smokeping-irtt

	       dscp
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       extraargs
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       fill
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       hmac
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       interval
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   Default value: interval = 1

	       ipversion
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       length
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       localaddr
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       metric
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   Default value: metric = rtt

	       pings
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       readfrom
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       readfrompollinterval
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   Default value: readfrompollinterval = 5

	       serverfill
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       sleep
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       writeto
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       Syntax changes for subsection /[-_0-9a-zA-Z]+/

		   The following new variables are valid:

		   binary (mandatory setting)
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: binary = /usr/bin/irtt

		   forks
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: forks = 5

		   offset
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   step
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   timeout
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: timeout =	5

		   tmpdir
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: tmpdir = /tmp/smokeping-irtt

		   dscp
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   extraargs
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   fill
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   hmac
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   interval
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: interval = 1

		   ipversion
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   length
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   localaddr
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   metric
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: metric = rtt

		   pings
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   readfrom
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   readfrompollinterval
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: readfrompollinterval = 5

		   serverfill
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   sleep
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   writeto
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

	       (End of dynamical grammar changes for example instance "IRTT".)

	   LDAP: (See the separate module documentation	for details about each
	   variable.)
	       The following new variables are valid:

	       forks
		   see above

		   Default value: forks	= 5

	       offset
		   see above

	       passwordfile
		   see above

	       step
		   see above

	       attrs
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       base
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       binddn
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       filter
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   This	variable dynamically modifies the grammar based	on its
		   value.

	       mininterval
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   Default value: mininterval =	1

	       password
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       pings
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       port
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       scheme
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   Default value: scheme = ldap

	       scope
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   Default value: scope	= sub

	       start_tls
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       timeout
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   Default value: timeout = 5

	       verify
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   Default value: verify = require

	       version
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       Syntax changes for subsection /[-_0-9a-zA-Z]+/

		   The following new variables are valid:

		   forks
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: forks = 5

		   offset
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   passwordfile
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   step
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   attrs
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   base
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   binddn
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   filter
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   mininterval
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: mininterval = 1

		   password
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   pings
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   port
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   scheme
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: scheme = ldap

		   scope
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: scope = sub

		   start_tls
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   timeout
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: timeout =	5

		   verify
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: verify = require

		   version
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

	       (End of dynamical grammar changes for example instance "LDAP".)

	   NFSping: (See the separate module documentation for details about
	   each	variable.)
	       The following new variables are valid:

	       binary (mandatory setting)
		   see above

	       blazemode
		   see above

	       hostinterval
		   see above

	       mininterval
		   see above

		   Default value: mininterval =	0.01

	       offset
		   see above

	       pings
		   see above

	       step
		   see above

	       tcp see above

	       timeout
		   see above

	       Syntax changes for subsection /[-_0-9a-zA-Z]+/

		   The following new variables are valid:

		   binary (mandatory setting)
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   blazemode
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   hostinterval
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   mininterval
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: mininterval = 0.01

		   offset
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   pings
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   step
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   tcp see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   timeout
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

	       (End of dynamical grammar changes for example instance
	       "NFSping".)

	   OpenSSHEOSPing: (See	the separate module documentation for details
	   about each variable.)
	       The following new variables are valid:

	       forks
		   see above

		   Default value: forks	= 5

	       offset
		   see above

	       packetsize
		   see above

		   Default value: packetsize = 100

	       step
		   see above

	       timeout
		   see above

		   Default value: timeout = 5

	       eospass
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   This	variable dynamically modifies the grammar based	on its
		   value.

	       eosuser
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   This	variable dynamically modifies the grammar based	on its
		   value.

	       pings
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       psource
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       source
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   This	variable dynamically modifies the grammar based	on its
		   value.

	       unpriv
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       Syntax changes for subsection /[-_0-9a-zA-Z]+/

		   The following new variables are valid:

		   forks
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: forks = 5

		   offset
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   packetsize
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: packetsize = 100

		   step
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   timeout
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: timeout =	5

		   eospass
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   eosuser
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   pings
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   psource
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   source
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   unpriv
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

	       (End of dynamical grammar changes for example instance
	       "OpenSSHEOSPing".)

	   OpenSSHJunOSPing: (See the separate module documentation for
	   details about each variable.)
	       The following new variables are valid:

	       forks
		   see above

		   Default value: forks	= 5

	       offset
		   see above

	       packetsize
		   see above

		   Default value: packetsize = 100

	       step
		   see above

	       timeout
		   see above

		   Default value: timeout = 5

	       tos see above

	       junospass
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   This	variable dynamically modifies the grammar based	on its
		   value.

	       junosuser
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   This	variable dynamically modifies the grammar based	on its
		   value.

	       pings
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       psource
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       source
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   This	variable dynamically modifies the grammar based	on its
		   value.

	       Syntax changes for subsection /[-_0-9a-zA-Z]+/

		   The following new variables are valid:

		   forks
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: forks = 5

		   offset
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   packetsize
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: packetsize = 100

		   step
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   timeout
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: timeout =	5

		   tos see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   junospass
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   junosuser
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   pings
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   psource
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   source
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

	       (End of dynamical grammar changes for example instance
	       "OpenSSHJunOSPing".)

	   Qstat: (See the separate module documentation for details about
	   each	variable.)
	       The following new variables are valid:

	       binary (mandatory setting)
		   see above

	       forks
		   see above

		   Default value: forks	= 5

	       game
		   see above

		   Default value: game = q3s

	       mininterval
		   see above

		   Default value: mininterval =	0.5

	       offset
		   see above

	       port
		   see above

	       sourceaddress
		   see above

	       sourceport
		   see above

	       step
		   see above

	       timeout
		   see above

		   Default value: timeout = 5

	       pings
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       Syntax changes for subsection /[-_0-9a-zA-Z]+/

		   The following new variables are valid:

		   binary (mandatory setting)
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   forks
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: forks = 5

		   game
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: game = q3s

		   mininterval
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: mininterval = 0.5

		   offset
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   port
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   sourceaddress
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   sourceport
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   step
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   timeout
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: timeout =	5

		   pings
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

	       (End of dynamical grammar changes for example instance
	       "Qstat".)

	   Radius: (See	the separate module documentation for details about
	   each	variable.)
	       The following new variables are valid:

	       forks
		   see above

		   Default value: forks	= 5

	       offset
		   see above

	       passwordfile
		   see above

	       secretfile
		   see above

	       step
		   see above

	       allowreject
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       mininterval
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   Default value: mininterval =	1

	       nas_ip_address
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       password
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       pings
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       port
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       secret
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       timeout
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   Default value: timeout = 5

	       username
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   This	variable dynamically modifies the grammar based	on its
		   value.

	       Syntax changes for subsection /[-_0-9a-zA-Z]+/

		   The following new variables are valid:

		   forks
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: forks = 5

		   offset
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   passwordfile
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   secretfile
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   step
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   allowreject
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   mininterval
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: mininterval = 1

		   nas_ip_address
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   password
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   pings
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   port
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   secret
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   timeout
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: timeout =	5

		   username
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

	       (End of dynamical grammar changes for example instance
	       "Radius".)

	   RemoteFPing:	(See the separate module documentation for details
	   about each variable.)
	       The following new variables are valid:

	       binary (mandatory setting)
		   see above

	       blazemode
		   see above

	       hostinterval
		   see above

	       mininterval
		   see above

		   Default value: mininterval =	0.01

	       offset
		   see above

	       packetsize
		   see above

	       pings
		   see above

	       protocol
		   see above

		   Default value: protocol = 4

	       rbinary (mandatory setting)
		   see above

	       rhost (mandatory	setting)
		   see above

	       rport
		   see above

	       ruser
		   see above

	       sourceaddress
		   see above

	       step
		   see above

	       timeout
		   see above

	       tos see above

	       usestdout
		   see above

	       Syntax changes for subsection /[-_0-9a-zA-Z]+/

		   The following new variables are valid:

		   binary (mandatory setting)
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   blazemode
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   hostinterval
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   mininterval
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: mininterval = 0.01

		   offset
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   packetsize
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   pings
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   protocol
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: protocol = 4

		   rbinary (mandatory setting)
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   rhost (mandatory setting)
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   rport
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   ruser
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   sourceaddress
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   step
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   timeout
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   tos see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   usestdout
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

	       (End of dynamical grammar changes for example instance
	       "RemoteFPing".)

	   SSH:	(See the separate module documentation for details about each
	   variable.)
	       The following new variables are valid:

	       binary (mandatory setting)
		   see above

	       forks
		   see above

		   Default value: forks	= 5

	       offset
		   see above

	       step
		   see above

	       timeout
		   see above

		   Default value: timeout = 5

	       keytype
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   Default value: keytype = rsa

	       pings
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       port
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   Default value: port = 22

	       Syntax changes for subsection /[-_0-9a-zA-Z]+/

		   The following new variables are valid:

		   binary (mandatory setting)
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   forks
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: forks = 5

		   offset
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   step
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   timeout
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: timeout =	5

		   keytype
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: keytype =	rsa

		   pings
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   port
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: port = 22

	       (End of dynamical grammar changes for example instance "SSH".)

	   SendEmail: (See the separate	module documentation for details about
	   each	variable.)
	       The following new variables are valid:

	       bodysize
		   see above

	       forks
		   see above

		   Default value: forks	= 5

	       from (mandatory setting)
		   see above

	       offset
		   see above

	       step
		   see above

	       subject
		   see above

		   Default value: subject = Test

	       timeout
		   see above

		   Default value: timeout = 5

	       to (mandatory setting)
		   see above

	       pings
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       port
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   Default value: port = 25

	       Syntax changes for subsection /[-_0-9a-zA-Z]+/

		   The following new variables are valid:

		   bodysize
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   forks
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: forks = 5

		   from	(mandatory setting)
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   offset
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   step
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   subject
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: subject =	Test

		   timeout
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: timeout =	5

		   to (mandatory setting)
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   pings
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   port
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: port = 25

	       (End of dynamical grammar changes for example instance
	       "SendEmail".)

	   SipSak: (See	the separate module documentation for details about
	   each	variable.)
	       The following new variables are valid:

	       binary
		   see above

		   Default value: binary = /usr/bin/sipsak

	       forks
		   see above

		   Default value: forks	= 5

	       offset
		   see above

	       step
		   see above

	       timeout
		   see above

		   Default value: timeout = 5

	       keep_second
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       params
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       pings
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       port
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       sipsak_timeout
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   Default value: sipsak_timeout = 2

	       user
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       Syntax changes for subsection /[-_0-9a-zA-Z]+/

		   The following new variables are valid:

		   binary
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: binary = /usr/bin/sipsak

		   forks
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: forks = 5

		   offset
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   step
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   timeout
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: timeout =	5

		   keep_second
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   params
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   pings
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   port
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   sipsak_timeout
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: sipsak_timeout = 2

		   user
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

	       (End of dynamical grammar changes for example instance
	       "SipSak".)

	   TCPPing: (See the separate module documentation for details about
	   each	variable.)
	       The following new variables are valid:

	       binary (mandatory setting)
		   see above

	       forks
		   see above

		   Default value: forks	= 5

	       offset
		   see above

	       step
		   see above

	       timeout
		   see above

		   Default value: timeout = 5

	       pings
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       port
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       Syntax changes for subsection /[-_0-9a-zA-Z]+/

		   The following new variables are valid:

		   binary (mandatory setting)
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   forks
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: forks = 5

		   offset
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   step
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   timeout
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: timeout =	5

		   pings
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   port
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

	       (End of dynamical grammar changes for example instance
	       "TCPPing".)

	   TacacsPlus: (See the	separate module	documentation for details
	   about each variable.)
	       The following new variables are valid:

	       forks
		   see above

		   Default value: forks	= 5

	       offset
		   see above

	       passwordfile
		   see above

	       secretfile
		   see above

	       step
		   see above

	       authtype
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   Default value: authtype = ASCII

	       mininterval
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   Default value: mininterval =	1

	       password
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       pings
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       port
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   Default value: port = 49

	       secret
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       timeout
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   Default value: timeout = 5

	       username
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   This	variable dynamically modifies the grammar based	on its
		   value.

	       Syntax changes for subsection /[-_0-9a-zA-Z]+/

		   The following new variables are valid:

		   forks
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: forks = 5

		   offset
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   passwordfile
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   secretfile
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   step
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   authtype
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: authtype = ASCII

		   mininterval
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: mininterval = 1

		   password
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   pings
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   port
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: port = 49

		   secret
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   timeout
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: timeout =	5

		   username
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

	       (End of dynamical grammar changes for example instance
	       "TacacsPlus".)

	   TelnetIOSPing: (See the separate module documentation for details
	   about each variable.)
	       The following new variables are valid:

	       forks
		   see above

		   Default value: forks	= 5

	       offset
		   see above

	       packetsize
		   see above

		   Default value: packetsize = 56

	       step
		   see above

	       timeout
		   see above

		   Default value: timeout = 5

	       iospass
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   This	variable dynamically modifies the grammar based	on its
		   value.

	       iosuser
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   This	variable dynamically modifies the grammar based	on its
		   value.

	       pings
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       psource
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       source
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   This	variable dynamically modifies the grammar based	on its
		   value.

	       vrf (This variable can be overridden target-specifically	in the
		   Targets section.)

	       Syntax changes for subsection /[-_0-9a-zA-Z]+/

		   The following new variables are valid:

		   forks
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: forks = 5

		   offset
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   packetsize
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: packetsize = 56

		   step
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   timeout
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: timeout =	5

		   iospass
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   iosuser
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   pings
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   psource
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   source
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   vrf This variable inherits its value	from the parent
		       section if nothing is specified here.

	       (End of dynamical grammar changes for example instance
	       "TelnetIOSPing".)

	   TelnetJunOSPing: (See the separate module documentation for details
	   about each variable.)
	       The following new variables are valid:

	       forks
		   see above

		   Default value: forks	= 5

	       offset
		   see above

	       packetsize
		   see above

		   Default value: packetsize = 100

	       step
		   see above

	       timeout
		   see above

		   Default value: timeout = 5

	       junospass
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   This	variable dynamically modifies the grammar based	on its
		   value.

	       junosuser
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   This	variable dynamically modifies the grammar based	on its
		   value.

	       pings
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       psource
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       source
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   This	variable dynamically modifies the grammar based	on its
		   value.

	       Syntax changes for subsection /[-_0-9a-zA-Z]+/

		   The following new variables are valid:

		   forks
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: forks = 5

		   offset
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   packetsize
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: packetsize = 100

		   step
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   timeout
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: timeout =	5

		   junospass
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   junosuser
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   pings
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   psource
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   source
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

	       (End of dynamical grammar changes for example instance
	       "TelnetJunOSPing".)

	   TraceroutePing: (See	the separate module documentation for details
	   about each variable.)
	       The following new variables are valid:

	       binary (mandatory setting)
		   see above

	       binaryv6
		   see above

	       forks
		   see above

		   Default value: forks	= 5

	       offset
		   see above

	       step
		   see above

	       timeout
		   see above

		   Default value: timeout = 5

	       desthost
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   This	variable dynamically modifies the grammar based	on its
		   value.

	       host
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   This	variable dynamically modifies the grammar based	on its
		   value.

	       maxttl
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       minttl
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       pings
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       wait
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       Syntax changes for subsection /[-_0-9a-zA-Z]+/

		   The following new variables are valid:

		   binary (mandatory setting)
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   binaryv6
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   forks
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: forks = 5

		   offset
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   step
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   timeout
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: timeout =	5

		   desthost
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   host
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   maxttl
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   minttl
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   pings
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   wait
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

	       (End of dynamical grammar changes for example instance
	       "TraceroutePing".)

	   WebProxyFilter: (See	the separate module documentation for details
	   about each variable.)
	       The following new variables are valid:

	       forks
		   see above

		   Default value: forks	= 5

	       maxsize
		   see above

		   Default value: maxsize = 2000

	       min_interval
		   see above

		   Default value: min_interval = 1

	       offset
		   see above

	       step
		   see above

	       useragent
		   see above

		   Default value: useragent = SmokePing/2.x (WebProxyFilter
		   Probe)

	       deny_re (mandatory setting)
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       more_hosts
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       pings
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

	       timeout
		   (This variable can be overridden target-specifically	in the
		   Targets section.)

		   Default value: timeout = 2

	       Syntax changes for subsection /[-_0-9a-zA-Z]+/

		   The following new variables are valid:

		   forks
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: forks = 5

		   maxsize
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: maxsize =	2000

		   min_interval
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: min_interval = 1

		   offset
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   step
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   useragent
		       see above

		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: useragent	= SmokePing/2.x
		       (WebProxyFilter Probe)

		   deny_re (mandatory setting)
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   more_hosts
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   pings
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		   timeout
		       This variable inherits its value	from the parent
		       section if nothing is specified here.

		       Default value: timeout =	2

	       (End of dynamical grammar changes for example instance
	       "WebProxyFilter".)

	   (End	of dynamical grammar changes for example instances of section
	   "/[-_0-9a-zA-Z]+/".)

   *** Targets *** (mandatory section)
       The Target Section defines the actual work of SmokePing.	It contains a
       hierarchical list of hosts which	mark the endpoints of the network
       connections the system should monitor. Each section can contain one
       host as well as other sections. By adding slaves	you can	measure	the
       connection to an	endpoint from multiple locations.

       The following variables can be set in this section:

       probe (mandatory	setting)
	   The name of the probe module	to be used for this host. The value of
	   this	variable gets propagated

	   This	variable dynamically modifies the grammar based	on its value.

       menu (mandatory setting)
	   Menu	entry for this section.	If not set this	will be	set to the
	   hostname.

       title (mandatory	setting)
	   Title of the	page when it is	displayed. This	will be	set to the
	   hostname if left empty.

       remark
	   An optional remark on the current section. It gets displayed	on the
	   webpage.

       alerts
	   A comma separated list of alerts to check for this target. The
	   alerts have to be setup in the Alerts section. Alerts are inherited
	   by child nodes. Use an empty	alerts definition to remove inherited
	   alerts from the current target and its children.

       slaves
	   List	of slave servers. It gets inherited by all targets.

       menuextra
	   HTML	String to be added to the end of each menu entry. The "{HOST}"
	   entry will be replaced by the host property of the relevant
	   section. The	"{CLASS}" entry	will be	replaced by the	same class as
	   the other tags in the manu line.

       parents

       The following sections are valid	on level 1:

       +/[-_0-9a-zA-Z]+/
	   Each	target section can contain information about a host to monitor
	   as well as further target sections. Most variables have already
	   been	described above. The expression	above defines legal names for
	   target sections.

	   This	section	is recursive: it can contain subsection(s) with	the
	   same	syntax.

	   The following variables can be set in this section:

	   probe
	       This variable inherits its value	from the parent	section	if
	       nothing is specified here.

	       This variable dynamically modifies the grammar based on its
	       value.

	   menu
	   title
	   alerts
	       Comma separated list of alert names

	       This variable inherits its value	from the parent	section	if
	       nothing is specified here.

	   note
	       Some information	about this entry which does NOT	get displayed
	       on the web.

	   email
	       This is the contact address for the owner of the	current	host.
	       In connection with the DYNAMIC hosts, the address will be used
	       for sending the belowmentioned script.

	   host
	       There are three types of	"hosts"	in smokeping.

	       1.  The 'hostname' is a name of a host you want to target from
		   smokeping

	       2.  The string DYNAMIC. Is for machines that have a dynamic IP
		   address. These boxes	are required to	regularly contact the
		   SmokePing server to confirm their IP	address.
		    When starting SmokePing with the commandline argument
		   --email it will add a secret	password to each of the
		   DYNAMIC host	lines and send a script	to the owner of	each
		   host. This script must be started periodically (cron) on
		   the host in question	to let smokeping know where the	host
		   is curently located.	If the target machine supports SNMP
		   SmokePing will also query the hosts sysContact, sysName and
		   sysLocation properties to make sure it is still the same
		   host.

	       3.  A space separated list of 'target-path' entries (multihost
		   target). All	targets	mentioned in this list will be
		   displayed in	one graph. Note	that the graph will look
		   different from the normal smokeping graphs. The syntax for
		   multihost targets is	as follows:

		    host = /world/town/host1 /world/town2/host33 /world/town2/host1~slave

	   remark
	   rawlog
	       Log the raw data, gathered for this target, in tab separated
	       format, to a file with the same basename	as the corresponding
	       RRD file. Use posix strftime to format the timestamp to be put
	       into the	file name. The filename	is built like this:

		basename.strftime.csv

	       Example:

		rawlog=%Y-%m-%d

	       this would create a new logfile every day with a	name like
	       this:

		targethost.2004-05-03.csv

	   alertee
	       If you want to have alerts for this target and all targets
	       below it	go to a	particular address on top of the address
	       already specified in the	alert, you can add it here. This can
	       be a comma separated list of items.

	       This variable inherits its value	from the parent	section	if
	       nothing is specified here.

	   slaves
	       The slave names must match the slaves you have setup in the
	       slaves section.

	       This variable inherits its value	from the parent	section	if
	       nothing is specified here.

	   menuextra
	       HTML String to be added to the end of each menu entry. The
	       following tags will be replaced:

		 {HOST}	    -> #$hostname
		 {HOSTNAME} -> $hostname
		 {CLASS}    -> same class as the other tags in the menu	line
		 {HASH}	    -> #

	       This variable inherits its value	from the parent	section	if
	       nothing is specified here.

	   parents
	       After setting up	a hierarchy in the Presentation	section	of the
	       configuration file you can use this property to assign an entry
	       to alternate hierarchies. The format for	parent entries is.

		hierarchyA:/Node1/Node2	hierarchyB:/Node3

	       The entries from	all parent properties together will build a
	       new tree	for each hierarchy. With this method it	is possible to
	       make a single target show up multiple times in a	tree. If you
	       think this is a good thing, go ahead, nothing is	stopping you.
	       Since you do not	only define the	parent but the full path of
	       the parent node,	circular dependencies are not possible.

	   hide
	       Set the hide property to	'yes' to hide this host	from the
	       navigation menu and from	search results.	Note that if you set
	       the hide	property on a non leaf entry all subordinate entries
	       will also disapear in the menu structure.  If you know a	direct
	       link to a page it is still accessible. Pages which are hidden
	       from the	menu due to a parent being hidden will still show up
	       in search results and in	alternate hierarchies where they are
	       below a non hidden parent.

	       Default value: hide = no

	   nomasterpoll
	       Use this	in a master/slave setup	where the master must not poll
	       a particular target. The	master will now	skip this entry	in its
	       polling cycle.  Note that if you	set the	hide property on a non
	       leaf entry all subordinate entries will also disapear in	the
	       menu structure. You can still access them via direct link or
	       via an alternate	hierarchy.

	       If you have no master/slave setup this will have	a similar
	       effect to the hide property, except that	the menu entry will
	       still show up, but will not contain any graphs.

	       This variable inherits its value	from the parent	section	if
	       nothing is specified here.

	       Default value: nomasterpoll = no

	   The following sections are valid on level 2:

	   ++/[-_0-9a-zA-Z]+/
	       This section is recursive: it can contain subsection(s) with
	       the same	syntax.

       Dynamical grammar changes for example values of variable	"probe":

       AnotherCurl: (See the separate module documentation for details about
       each variable.)
	   The following new variables are valid:

	   agent
	       see above

	   extraargs
	       see above

	   extrare
	       see above

	   follow_redirects
	       see above

	   include_redirects
	       see above

	   insecure_ssl
	       see above

	   interface
	       see above

	   pings
	       see above

	   ssl2
	       see above

	   timeout
	       see above

	   urlformat
	       see above

	   write_out
	       see above

	   Syntax changes for subsection /[-_0-9a-zA-Z]+/

	       The following new variables are valid:

	       agent
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       extraargs
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       extrare
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       follow_redirects
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       include_redirects
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       insecure_ssl
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       interface
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       pings
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       ssl2
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       timeout
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       urlformat
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       write_out
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	   (End	of dynamical grammar changes for variable "probe" example
	   value "AnotherCurl".)

       AnotherDNS: (See	the separate module documentation for details about
       each variable.)
	   The following new variables are valid:

	   authoritative
	       see above

	   ipversion
	       see above

	   lookup
	       see above

	   mininterval
	       see above

	   pings
	       see above

	   port
	       see above

	   protocol
	       see above

	   recordtype
	       see above

	   require_answers
	       see above

	   require_noerror
	       see above

	   timeout
	       see above

	   Syntax changes for subsection /[-_0-9a-zA-Z]+/

	       The following new variables are valid:

	       authoritative
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       ipversion
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       lookup
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       mininterval
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       pings
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       port
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       protocol
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       recordtype
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       require_answers
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       require_noerror
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       timeout
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	   (End	of dynamical grammar changes for variable "probe" example
	   value "AnotherDNS".)

       AnotherSSH: (See	the separate module documentation for details about
       each variable.)
	   The following new variables are valid:

	   greeting
	       see above

	   interval
	       see above

	   mininterval
	       see above

	   pings
	       see above

	   port
	       see above

	   timeout
	       see above

	   Syntax changes for subsection /[-_0-9a-zA-Z]+/

	       The following new variables are valid:

	       greeting
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       interval
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       mininterval
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       pings
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       port
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       timeout
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	   (End	of dynamical grammar changes for variable "probe" example
	   value "AnotherSSH".)

       CiscoRTTMonDNS: (See the	separate module	documentation for details
       about each variable.)
	   The following new variables are valid:

	   ioshost
	       see above

	   iosint
	       see above

	   name
	       see above

	   pings
	       see above

	   timeout
	       see above

	   Syntax changes for subsection /[-_0-9a-zA-Z]+/

	       The following new variables are valid:

	       ioshost
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       iosint
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       name
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       pings
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       timeout
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	   (End	of dynamical grammar changes for variable "probe" example
	   value "CiscoRTTMonDNS".)

       CiscoRTTMonEchoICMP: (See the separate module documentation for details
       about each variable.)
	   The following new variables are valid:

	   ioshost
	       see above

	   iosint
	       see above

	   packetsize
	       see above

	   pings
	       see above

	   timeout
	       see above

	   tos see above

	   vrf see above

	   Syntax changes for subsection /[-_0-9a-zA-Z]+/

	       The following new variables are valid:

	       ioshost
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       iosint
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       packetsize
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       pings
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       timeout
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       tos see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       vrf see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	   (End	of dynamical grammar changes for variable "probe" example
	   value "CiscoRTTMonEchoICMP".)

       CiscoRTTMonTcpConnect: (See the separate	module documentation for
       details about each variable.)
	   The following new variables are valid:

	   ioshost
	       see above

	   iosint
	       see above

	   pings
	       see above

	   port
	       see above

	   timeout
	       see above

	   tos see above

	   Syntax changes for subsection /[-_0-9a-zA-Z]+/

	       The following new variables are valid:

	       ioshost
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       iosint
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       pings
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       port
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       timeout
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       tos see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	   (End	of dynamical grammar changes for variable "probe" example
	   value "CiscoRTTMonTcpConnect".)

       Curl: (See the separate module documentation for	details	about each
       variable.)
	   The following new variables are valid:

	   agent
	       see above

	   expect
	       see above

	   extraargs
	       see above

	   extrare
	       see above

	   follow_redirects
	       see above

	   include_redirects
	       see above

	   insecure_ssl
	       see above

	   interface
	       see above

	   pings
	       see above

	   require_zero_status
	       see above

	   ssl2
	       see above

	   timeout
	       see above

	   urlformat
	       see above

	   Syntax changes for subsection /[-_0-9a-zA-Z]+/

	       The following new variables are valid:

	       agent
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       expect
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       extraargs
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       extrare
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       follow_redirects
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       include_redirects
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       insecure_ssl
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       interface
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       pings
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       require_zero_status
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       ssl2
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       timeout
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       urlformat
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	   (End	of dynamical grammar changes for variable "probe" example
	   value "Curl".)

       DNS: (See the separate module documentation for details about each
       variable.)
	   The following new variables are valid:

	   lookup
	       see above

	   pings
	       see above

	   server
	       see above

	   Syntax changes for subsection /[-_0-9a-zA-Z]+/

	       The following new variables are valid:

	       lookup
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       pings
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       server
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	   (End	of dynamical grammar changes for variable "probe" example
	   value "DNS".)

       DismanPing: (See	the separate module documentation for details about
       each variable.)
	   The following new variables are valid:

	   ownerindex
	       see above

	   packetsize
	       see above

	   pinghost
	       see above

	   pingsrc
	       see above

	   Syntax changes for subsection /[-_0-9a-zA-Z]+/

	       The following new variables are valid:

	       ownerindex
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       packetsize
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       pinghost
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       pingsrc
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	   (End	of dynamical grammar changes for variable "probe" example
	   value "DismanPing".)

       EchoPing: (See the separate module documentation	for details about each
       variable.)
	   The following new variables are valid:

	   extraopts
	       see above

	   fill
	       see above

	   ipversion
	       see above

	   pings
	       see above

	   priority
	       see above

	   size
	       see above

	   timeout
	       see above

	   tos see above

	   udp see above

	   waittime
	       see above

	   Syntax changes for subsection /[-_0-9a-zA-Z]+/

	       The following new variables are valid:

	       extraopts
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       fill
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       ipversion
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       pings
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       priority
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       size
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       timeout
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       tos see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       udp see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       waittime
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	   (End	of dynamical grammar changes for variable "probe" example
	   value "EchoPing".)

       EchoPingChargen:	(See the separate module documentation for details
       about each variable.)
	   The following new variables are valid:

	   extraopts
	       see above

	   fill
	       see above

	   ipversion
	       see above

	   pings
	       see above

	   priority
	       see above

	   size
	       see above

	   timeout
	       see above

	   tos see above

	   waittime
	       see above

	   Syntax changes for subsection /[-_0-9a-zA-Z]+/

	       The following new variables are valid:

	       extraopts
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       fill
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       ipversion
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       pings
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       priority
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       size
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       timeout
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       tos see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       waittime
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	   (End	of dynamical grammar changes for variable "probe" example
	   value "EchoPingChargen".)

       EchoPingDNS: (See the separate module documentation for details about
       each variable.)
	   The following new variables are valid:

	   dns_request
	       see above

	   dns_tcp
	       see above

	   dns_type
	       see above

	   extraopts
	       see above

	   ipversion
	       see above

	   pings
	       see above

	   plugin
	       see above

	   pluginargs
	       see above

	   priority
	       see above

	   timeout
	       see above

	   tos see above

	   waittime
	       see above

	   Syntax changes for subsection /[-_0-9a-zA-Z]+/

	       The following new variables are valid:

	       dns_request
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       dns_tcp
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       dns_type
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       extraopts
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       ipversion
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       pings
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       plugin
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       pluginargs
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       priority
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       timeout
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       tos see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       waittime
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	   (End	of dynamical grammar changes for variable "probe" example
	   value "EchoPingDNS".)

       EchoPingDiscard:	(See the separate module documentation for details
       about each variable.)
	   The following new variables are valid:

	   extraopts
	       see above

	   fill
	       see above

	   ipversion
	       see above

	   pings
	       see above

	   priority
	       see above

	   size
	       see above

	   timeout
	       see above

	   tos see above

	   udp see above

	   waittime
	       see above

	   Syntax changes for subsection /[-_0-9a-zA-Z]+/

	       The following new variables are valid:

	       extraopts
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       fill
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       ipversion
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       pings
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       priority
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       size
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       timeout
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       tos see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       udp see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       waittime
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	   (End	of dynamical grammar changes for variable "probe" example
	   value "EchoPingDiscard".)

       EchoPingHttp: (See the separate module documentation for	details	about
       each variable.)
	   The following new variables are valid:

	   accept_redirects
	       see above

	   extraopts
	       see above

	   ignore_cache
	       see above

	   ipversion
	       see above

	   pings
	       see above

	   port
	       see above

	   priority
	       see above

	   revalidate_data
	       see above

	   timeout
	       see above

	   tos see above

	   url see above

	   waittime
	       see above

	   Syntax changes for subsection /[-_0-9a-zA-Z]+/

	       The following new variables are valid:

	       accept_redirects
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       extraopts
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       ignore_cache
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       ipversion
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       pings
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       port
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       priority
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       revalidate_data
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       timeout
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       tos see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       url see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       waittime
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	   (End	of dynamical grammar changes for variable "probe" example
	   value "EchoPingHttp".)

       EchoPingHttps: (See the separate	module documentation for details about
       each variable.)
	   The following new variables are valid:

	   accept_redirects
	       see above

	   extraopts
	       see above

	   ignore_cache
	       see above

	   ipversion
	       see above

	   pings
	       see above

	   port
	       see above

	   priority
	       see above

	   prot
	       see above

	   revalidate_data
	       see above

	   timeout
	       see above

	   tos see above

	   url see above

	   waittime
	       see above

	   Syntax changes for subsection /[-_0-9a-zA-Z]+/

	       The following new variables are valid:

	       accept_redirects
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       extraopts
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       ignore_cache
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       ipversion
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       pings
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       port
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       priority
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       prot
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       revalidate_data
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       timeout
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       tos see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       url see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       waittime
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	   (End	of dynamical grammar changes for variable "probe" example
	   value "EchoPingHttps".)

       EchoPingIcp: (See the separate module documentation for details about
       each variable.)
	   The following new variables are valid:

	   extraopts
	       see above

	   ipversion
	       see above

	   pings
	       see above

	   priority
	       see above

	   timeout
	       see above

	   tos see above

	   url see above

	   waittime
	       see above

	   Syntax changes for subsection /[-_0-9a-zA-Z]+/

	       The following new variables are valid:

	       extraopts
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       ipversion
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       pings
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       priority
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       timeout
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       tos see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       url see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       waittime
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	   (End	of dynamical grammar changes for variable "probe" example
	   value "EchoPingIcp".)

       EchoPingLDAP: (See the separate module documentation for	details	about
       each variable.)
	   The following new variables are valid:

	   extraopts
	       see above

	   ipversion
	       see above

	   ldap_base
	       see above

	   ldap_request
	       see above

	   ldap_scope
	       see above

	   pings
	       see above

	   plugin
	       see above

	   pluginargs
	       see above

	   priority
	       see above

	   timeout
	       see above

	   tos see above

	   waittime
	       see above

	   Syntax changes for subsection /[-_0-9a-zA-Z]+/

	       The following new variables are valid:

	       extraopts
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       ipversion
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       ldap_base
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       ldap_request
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       ldap_scope
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       pings
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       plugin
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       pluginargs
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       priority
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       timeout
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       tos see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       waittime
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	   (End	of dynamical grammar changes for variable "probe" example
	   value "EchoPingLDAP".)

       EchoPingPlugin: (See the	separate module	documentation for details
       about each variable.)
	   The following new variables are valid:

	   extraopts
	       see above

	   ipversion
	       see above

	   pings
	       see above

	   plugin
	       see above

	   pluginargs
	       see above

	   priority
	       see above

	   timeout
	       see above

	   tos see above

	   waittime
	       see above

	   Syntax changes for subsection /[-_0-9a-zA-Z]+/

	       The following new variables are valid:

	       extraopts
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       ipversion
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       pings
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       plugin
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       pluginargs
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       priority
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       timeout
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       tos see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       waittime
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	   (End	of dynamical grammar changes for variable "probe" example
	   value "EchoPingPlugin".)

       EchoPingSmtp: (See the separate module documentation for	details	about
       each variable.)
	   The following new variables are valid:

	   extraopts
	       see above

	   ipversion
	       see above

	   pings
	       see above

	   priority
	       see above

	   timeout
	       see above

	   tos see above

	   waittime
	       see above

	   Syntax changes for subsection /[-_0-9a-zA-Z]+/

	       The following new variables are valid:

	       extraopts
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       ipversion
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       pings
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       priority
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       timeout
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       tos see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       waittime
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	   (End	of dynamical grammar changes for variable "probe" example
	   value "EchoPingSmtp".)

       EchoPingWhois: (See the separate	module documentation for details about
       each variable.)
	   The following new variables are valid:

	   extraopts
	       see above

	   ipversion
	       see above

	   pings
	       see above

	   plugin
	       see above

	   pluginargs
	       see above

	   priority
	       see above

	   timeout
	       see above

	   tos see above

	   waittime
	       see above

	   whois_request
	       see above

	   Syntax changes for subsection /[-_0-9a-zA-Z]+/

	       The following new variables are valid:

	       extraopts
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       ipversion
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       pings
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       plugin
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       pluginargs
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       priority
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       timeout
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       tos see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       waittime
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       whois_request
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	   (End	of dynamical grammar changes for variable "probe" example
	   value "EchoPingWhois".)

       FPing: (See the separate	module documentation for details about each
       variable.)
	   No changes that can be automatically	described.

	   (End	of dynamical grammar changes for variable "probe" example
	   value "FPing".)

       FPing6: (See the	separate module	documentation for details about	each
       variable.)
	   No changes that can be automatically	described.

	   (End	of dynamical grammar changes for variable "probe" example
	   value "FPing6".)

       FPingContinuous:	(See the separate module documentation for details
       about each variable.)
	   No changes that can be automatically	described.

	   (End	of dynamical grammar changes for variable "probe" example
	   value "FPingContinuous".)

       FTPtransfer: (See the separate module documentation for details about
       each variable.)
	   The following new variables are valid:

	   localaddr
	       see above

	   passive
	       see above

	   password
	       see above

	   pings
	       see above

	   port
	       see above

	   timeout
	       see above

	   username
	       see above

	   Syntax changes for subsection /[-_0-9a-zA-Z]+/

	       The following new variables are valid:

	       localaddr
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       passive
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       password
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       pings
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       port
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       timeout
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       username
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	   (End	of dynamical grammar changes for variable "probe" example
	   value "FTPtransfer".)

       IOSPing:	(See the separate module documentation for details about each
       variable.)
	   The following new variables are valid:

	   ioshost
	       see above

	   iosint
	       see above

	   iosuser
	       see above

	   pings
	       see above

	   Syntax changes for subsection /[-_0-9a-zA-Z]+/

	       The following new variables are valid:

	       ioshost
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       iosint
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       iosuser
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       pings
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	   (End	of dynamical grammar changes for variable "probe" example
	   value "IOSPing".)

       IRTT: (See the separate module documentation for	details	about each
       variable.)
	   The following new variables are valid:

	   dscp
	       see above

	   extraargs
	       see above

	   fill
	       see above

	   hmac
	       see above

	   interval
	       see above

	   ipversion
	       see above

	   length
	       see above

	   localaddr
	       see above

	   metric
	       see above

	   pings
	       see above

	   readfrom
	       see above

	   readfrompollinterval
	       see above

	   serverfill
	       see above

	   sleep
	       see above

	   writeto
	       see above

	   Syntax changes for subsection /[-_0-9a-zA-Z]+/

	       The following new variables are valid:

	       dscp
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       extraargs
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       fill
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       hmac
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       interval
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       ipversion
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       length
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       localaddr
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       metric
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       pings
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       readfrom
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       readfrompollinterval
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       serverfill
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       sleep
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       writeto
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	   (End	of dynamical grammar changes for variable "probe" example
	   value "IRTT".)

       LDAP: (See the separate module documentation for	details	about each
       variable.)
	   The following new variables are valid:

	   attrs
	       see above

	   base
	       see above

	   binddn
	       see above

	   filter
	       see above

	   mininterval
	       see above

	   password
	       see above

	   pings
	       see above

	   port
	       see above

	   scheme
	       see above

	   scope
	       see above

	   start_tls
	       see above

	   timeout
	       see above

	   verify
	       see above

	   version
	       see above

	   Syntax changes for subsection /[-_0-9a-zA-Z]+/

	       The following new variables are valid:

	       attrs
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       base
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       binddn
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       filter
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       mininterval
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       password
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       pings
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       port
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       scheme
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       scope
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       start_tls
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       timeout
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       verify
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       version
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	   (End	of dynamical grammar changes for variable "probe" example
	   value "LDAP".)

       NFSping:	(See the separate module documentation for details about each
       variable.)
	   No changes that can be automatically	described.

	   (End	of dynamical grammar changes for variable "probe" example
	   value "NFSping".)

       OpenSSHEOSPing: (See the	separate module	documentation for details
       about each variable.)
	   The following new variables are valid:

	   eospass
	       see above

	   eosuser
	       see above

	   pings
	       see above

	   psource
	       see above

	   source
	       see above

	   unpriv
	       see above

	   Syntax changes for subsection /[-_0-9a-zA-Z]+/

	       The following new variables are valid:

	       eospass
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       eosuser
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       pings
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       psource
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       source
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       unpriv
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	   (End	of dynamical grammar changes for variable "probe" example
	   value "OpenSSHEOSPing".)

       OpenSSHJunOSPing: (See the separate module documentation	for details
       about each variable.)
	   The following new variables are valid:

	   junospass
	       see above

	   junosuser
	       see above

	   pings
	       see above

	   psource
	       see above

	   source
	       see above

	   Syntax changes for subsection /[-_0-9a-zA-Z]+/

	       The following new variables are valid:

	       junospass
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       junosuser
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       pings
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       psource
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       source
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	   (End	of dynamical grammar changes for variable "probe" example
	   value "OpenSSHJunOSPing".)

       Qstat: (See the separate	module documentation for details about each
       variable.)
	   The following new variables are valid:

	   pings
	       see above

	   Syntax changes for subsection /[-_0-9a-zA-Z]+/

	       The following new variables are valid:

	       pings
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	   (End	of dynamical grammar changes for variable "probe" example
	   value "Qstat".)

       Radius: (See the	separate module	documentation for details about	each
       variable.)
	   The following new variables are valid:

	   allowreject
	       see above

	   mininterval
	       see above

	   nas_ip_address
	       see above

	   password
	       see above

	   pings
	       see above

	   port
	       see above

	   secret
	       see above

	   timeout
	       see above

	   username
	       see above

	   Syntax changes for subsection /[-_0-9a-zA-Z]+/

	       The following new variables are valid:

	       allowreject
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       mininterval
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       nas_ip_address
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       password
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       pings
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       port
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       secret
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       timeout
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       username
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	   (End	of dynamical grammar changes for variable "probe" example
	   value "Radius".)

       RemoteFPing: (See the separate module documentation for details about
       each variable.)
	   No changes that can be automatically	described.

	   (End	of dynamical grammar changes for variable "probe" example
	   value "RemoteFPing".)

       SSH: (See the separate module documentation for details about each
       variable.)
	   The following new variables are valid:

	   keytype
	       see above

	   pings
	       see above

	   port
	       see above

	   Syntax changes for subsection /[-_0-9a-zA-Z]+/

	       The following new variables are valid:

	       keytype
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       pings
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       port
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	   (End	of dynamical grammar changes for variable "probe" example
	   value "SSH".)

       SendEmail: (See the separate module documentation for details about
       each variable.)
	   The following new variables are valid:

	   pings
	       see above

	   port
	       see above

	   Syntax changes for subsection /[-_0-9a-zA-Z]+/

	       The following new variables are valid:

	       pings
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       port
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	   (End	of dynamical grammar changes for variable "probe" example
	   value "SendEmail".)

       SipSak: (See the	separate module	documentation for details about	each
       variable.)
	   The following new variables are valid:

	   keep_second
	       see above

	   params
	       see above

	   pings
	       see above

	   port
	       see above

	   sipsak_timeout
	       see above

	   user
	       see above

	   Syntax changes for subsection /[-_0-9a-zA-Z]+/

	       The following new variables are valid:

	       keep_second
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       params
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       pings
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       port
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       sipsak_timeout
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       user
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	   (End	of dynamical grammar changes for variable "probe" example
	   value "SipSak".)

       TCPPing:	(See the separate module documentation for details about each
       variable.)
	   The following new variables are valid:

	   pings
	       see above

	   port
	       see above

	   Syntax changes for subsection /[-_0-9a-zA-Z]+/

	       The following new variables are valid:

	       pings
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       port
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	   (End	of dynamical grammar changes for variable "probe" example
	   value "TCPPing".)

       TacacsPlus: (See	the separate module documentation for details about
       each variable.)
	   The following new variables are valid:

	   authtype
	       see above

	   mininterval
	       see above

	   password
	       see above

	   pings
	       see above

	   port
	       see above

	   secret
	       see above

	   timeout
	       see above

	   username
	       see above

	   Syntax changes for subsection /[-_0-9a-zA-Z]+/

	       The following new variables are valid:

	       authtype
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       mininterval
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       password
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       pings
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       port
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       secret
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       timeout
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       username
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	   (End	of dynamical grammar changes for variable "probe" example
	   value "TacacsPlus".)

       TelnetIOSPing: (See the separate	module documentation for details about
       each variable.)
	   The following new variables are valid:

	   iospass
	       see above

	   iosuser
	       see above

	   pings
	       see above

	   psource
	       see above

	   source
	       see above

	   vrf see above

	   Syntax changes for subsection /[-_0-9a-zA-Z]+/

	       The following new variables are valid:

	       iospass
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       iosuser
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       pings
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       psource
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       source
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       vrf see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	   (End	of dynamical grammar changes for variable "probe" example
	   value "TelnetIOSPing".)

       TelnetJunOSPing:	(See the separate module documentation for details
       about each variable.)
	   The following new variables are valid:

	   junospass
	       see above

	   junosuser
	       see above

	   pings
	       see above

	   psource
	       see above

	   source
	       see above

	   Syntax changes for subsection /[-_0-9a-zA-Z]+/

	       The following new variables are valid:

	       junospass
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       junosuser
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       pings
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       psource
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       source
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	   (End	of dynamical grammar changes for variable "probe" example
	   value "TelnetJunOSPing".)

       TraceroutePing: (See the	separate module	documentation for details
       about each variable.)
	   The following new variables are valid:

	   desthost
	       see above

	   host
	       see above

	   maxttl
	       see above

	   minttl
	       see above

	   pings
	       see above

	   wait
	       see above

	   Syntax changes for subsection /[-_0-9a-zA-Z]+/

	       The following new variables are valid:

	       desthost
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       maxttl
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       minttl
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       pings
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       wait
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	   (End	of dynamical grammar changes for variable "probe" example
	   value "TraceroutePing".)

       WebProxyFilter: (See the	separate module	documentation for details
       about each variable.)
	   The following new variables are valid:

	   deny_re
	       see above

	   more_hosts
	       see above

	   pings
	       see above

	   timeout
	       see above

	   Syntax changes for subsection /[-_0-9a-zA-Z]+/

	       The following new variables are valid:

	       deny_re
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       more_hosts
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       pings
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	       timeout
		   see above

		   This	variable inherits its value from the parent section if
		   nothing is specified	here.

	   (End	of dynamical grammar changes for variable "probe" example
	   value "WebProxyFilter".)

       (End of dynamical grammar changes for example values of variable
       "probe".)

   *** Alerts ***
       The Alert section lets you setup	loss and RTT pattern detectors.	After
       each round of polling, SmokePing	will examine its data and determine
       which detectors match. Detectors	are enabled per	target and get
       inherited by the	targets	children.

       Detectors are not just simple thresholds	which go off at	first sight of
       a problem. They are configurable	to detect special loss or RTT
       patterns. They let you look at a	number of past readings	to make	a more
       educated	decision on what kind of alert should be sent, or if an	alert
       should be sent at all.

       The patterns are	numbers	prefixed with an operator indicating the type
       of comparison required for a match.

       The following RTT pattern detects if a target's RTT goes	from
       constantly below	10ms to	constantly 100ms and more:

	old ------------------------------> new
	<10,<10,<10,<10,<10,>10,>100,>100,>100

       Loss patterns work in a similar way, except that	the loss is defined as
       the percentage the total	number of received packets is of the total
       number of packets sent.

	old ------------------------------> new
	==0%,==0%,==0%,==0%,>20%,>20%,>=20%

       Apart from normal numbers, patterns can also contain the	values * which
       is true for all values regardless of the	operator. And U	which is true
       for unknown data	together with the == and =! operators.

       Detectors normally act on state changes.	This has the disadvantage,
       that they will fail to find conditions which were already present when
       launching smokeping. For	this it	is possible to write detectors that
       begin with the special value ==S	it is inserted whenever	smokeping is
       started up.

       You can write

	==S,>20%,>20%

       to detect lines that have been losing more than 20% of the packets for
       two periods after startup.

       If you want to make sure	a value	within a certain range you can use two
       conditions in one element

	>45%<=55%

       Sometimes it may	be that	conditions occur at irregular intervals. But
       still you only want to throw an alert if	they occur several times
       within a	certain	amount of times. The operator *X* will ignore up to X
       values and still	let the	pattern	match:

	 >10%,*10*,>10%

       will fire if more than 10% of the packets have been lost	at least twice
       over the	last 10	samples.

       A complete example

	*** Alerts ***
	to = admin@company.xy,peter@home.xy
	from = smokealert@company.xy

	+lossdetect
	type = loss
	# in percent
	pattern	= ==0%,==0%,==0%,==0%,>20%,>20%,>20%
	comment	= suddenly there is packet loss

	+miniloss
	type = loss
	# in percent
	pattern	= >0%,*12*,>0%,*12*,>0%
	comment	= detected loss	3 times	over the last two hours

	+rttdetect
	type = rtt
	# in milliseconds
	pattern	= <10,<10,<10,<10,<10,<100,>100,>100,>100
	comment	= routing messed up again ?

	+rttbadstart
	type = rtt
	# in milliseconds
	pattern	= ==S,==U
	comment	= offline at startup

       The following variables can be set in this section:

       to (mandatory setting)
	   Either an email address to send alerts to, or the name of a program
	   to execute when an alert matches. To	call a program,	the first
	   character of	the to value must be a pipe symbol "|".	The program
	   will	the be called whenever an alert	matches, using the following 5
	   arguments (except if	edgetrigger is 'yes'; see below): name-of-
	   alert, target, loss-pattern,	rtt-pattern, hostname.	You can	also
	   provide a comma separated list of addresses and programs.

       from (mandatory setting)
	   who should alerts appear to be coming from ?

       edgetrigger
	   The alert notifications and/or the programs executed	are normally
	   triggered every time	the alert matches. If this variable is set to
	   'yes', they will be triggered only when the alert's state is
	   changed, ie.	when it's raised and when it's cleared.	 Subsequent
	   matches of the same alert will thus not trigger a notification.

	   When	this variable is set to	'yes', a notification program (see the
	   to variable documentation above) will get a sixth argument, raise,
	   which has the value 1 if the	alert was just raised and 0 if it was
	   cleared.

	   Default value: edgetrigger =	no

       mailtemplate
	   When	sending	out mails for alerts, smokeping	normally uses an
	   internally generated	message. With the mailtemplate you can specify
	   a filename for a custom template. The file should contain a
	   'Subject: ...' line.	The rest of the	file should contain text. The
	   all <##keyword##> type strings will get replaced in the template
	   before it is	sent out. the following	keywords are supported:

	    <##ALERT##>	   - target name
	    <##WHAT##>	   - status (is	active,	was raised, was	cleared)
	    <##LINE##>	   - path in the config	tree
	    <##URL##>	   - webpage for graph
	    <##STAMP##>	   - date and time
	    <##PAT##>	   - pattern that matched the alert
	    <##LOSS##>	   - loss history
	    <##RTT##>	   - rtt history
	    <##COMMENT##>  - comment

       The following sections are valid	on level 1:

       +/[^\s,]+/
	   The following variables can be set in this section:

	   type	(mandatory setting)
	       Currently the pattern types rtt and loss	and matcher are	known.

	       Matchers	are plugin modules that	extend the alert conditions.
	       Known matchers are Avgratio, CheckLatency, CheckLoss, ExpLoss,
	       Median, Medratio.

	       See the documentation of	the corresponding matcher module (eg.
	       Smokeping::matchers::Avgratio) for instructions on configuring
	       it.

	   pattern (mandatory setting)
	       a comma separated list of comparison operators and numbers. rtt
	       patterns	are in milliseconds, loss patterns are in percents

	   comment (mandatory setting)
	   to  Similar to the "to" parameter on	the top-level except that  it
	       will only be used IN ADDITION to	the value of the toplevel
	       parameter. Same rules apply.

	   edgetrigger
	       This variable inherits its value	from the parent	section	if
	       nothing is specified here.

	       Default value: edgetrigger = no

	   mailtemplate
	       This variable inherits its value	from the parent	section	if
	       nothing is specified here.

	   priority
	       if multiple alerts 'match' only the one with the	highest
	       priority	(lowest	number)	will cause and alert to	be sent.
	       Alerts without priority will be sent in any case.

   *** Slaves ***
       Your smokeping can remote control other somkeping instances running in
       slave mode on different hosts. Use this section to tell your master
       smokeping about the slaves you are going	to use.

       The following variables can be set in this section:

       secrets (mandatory setting)
	   The slave secrets file contines one line per	slave with the name of
	   the slave followed by a colon and the secret:

	    slave1:secret1
	    slave2:secret2
	    ...

	   Note	that these secrets combined with a man-in-the-middle attack
	   effectively give shell access to the	corresponding slaves (see
	   smokeping_master_slave), so the file	should be appropriately
	   protected and the secrets should not	be easily crackable.

       The following sections are valid	on level 1:

       +/[-_0-9a-zA-Z.]+/
	   Define some basic properties	for the	slave.

	   The following variables can be set in this section:

	   display_name	(mandatory setting)
	       Name of the Slave host.

	   location
	       Where is	the slave located.

	   color (mandatory setting)
	       Color for the slave in graphs where input from multiple hosts
	       is presented.

	   The following sections are valid on level 2:

	   ++override
	       If part of the configuration information	must be	overwritten to
	       match the settings of the you can specify this in this section.
	       A setting is overwritten	by giveing the full path of the
	       configuration variable. If you have this	configuration in the
	       Probes section:

		*** Probes ***
		+FPing
		binary = /usr/sepp/bin/fping

	       You can override	it for a particular slave like this:

		++override
		Probes.FPing.binary = /usr/bin/fping

	       The following variables can be set in this section:

	       /\S+/

COPYRIGHT
       Copyright (c) 2001-2007 by Tobias Oetiker. All right reserved.

LICENSE
       This program is free software; you can redistribute it and/or modify it
       under the terms of the GNU General Public License as published by the
       Free Software Foundation; either	version	2 of the License, or (at your
       option) any later version.

       This program is distributed in the hope that it will be useful, but
       WITHOUT ANY WARRANTY; without even the implied warranty of
       MERCHANTABILITY or FITNESS FOR A	PARTICULAR PURPOSE.  See the GNU
       General Public License for more details.

       You should have received	a copy of the GNU General Public License along
       with this program; if not, write	to the Free Software Foundation, Inc.,
       675 Mass	Ave, Cambridge,	MA 02139, USA.

AUTHOR
       Tobias Oetiker <tobi@oetiker.ch>

2.7.3				  2020-08-30		   SMOKEPING_CONFIG(5)

NAME | OVERVIEW | REFERENCE | COPYRIGHT | LICENSE | AUTHOR

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=smokeping_config&sektion=5&manpath=FreeBSD+12.2-RELEASE+and+Ports>

home | help