Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
SMBTORTURE(1)			  Test Suite			 SMBTORTURE(1)

NAME
       smbtorture - Run	a series of tests against a SMB	server

SYNOPSIS
       smbtorture {//server/share} [-d debuglevel] [-U user%pass] [-k]
		  [-N numprocs]	[-n netbios_name] [-W workgroup]
		  [-o num_operations] [-e num files(entries)]
		  [-O socket_options] [-m maximum_protocol] [-L]
		  [-c CLIENT.TXT] [-t timelimit] [-C filename] [-A] [-p	port]
		  [-s seed] [-f	max_failures] [-X] {BINDING-STRING|UNC}
		  {TEST1} [TEST2] [...]

DESCRIPTION
       smbtorture is a testsuite that runs several tests against a SMB server.
       All tests are known to succeed against a	Windows	2003 server (?).
       Smbtorture's primary goal is finding differences	in implementations of
       the SMB protocol	and testing SMB	servers.

       Any number of tests can be specified on the command-line. If no tests
       are specified, all tests	are run.

       If no arguments are specified at	all, all available options and tests
       are listed.

   Binding string format
       The binding string format is:

       TRANSPORT:host[flags]

       Where TRANSPORT is either ncacn_np for SMB, ncacn_ip_tcp	for RPC/TCP or
       ncalrpc for local connections.

       'host' is an IP or hostname or netbios name. If the binding string
       identifies the server side of an	endpoint, 'host' may be	an empty
       string.

       'flags' can include a SMB pipe name if using the	ncacn_np transport or
       a TCP port number if using the ncacn_ip_tcp transport, otherwise	they
       will be auto-determined.

       other recognised	flags are:

       sign
	   enable ntlmssp signing

       seal
	   enable ntlmssp sealing

       connect
	   enable rpc connect level auth (auth,	but no sign or seal)

       validate
	   enable the NDR validator

       print
	   enable debugging of the packets

       bigendian
	   use bigendian RPC

       padcheck
	   check reply data for	non-zero pad bytes

       For example, these all connect to the samr pipe:

       o   ncacn_np:myserver

       o   ncacn_np:myserver[samr]

       o   ncacn_np:myserver[\\pipe\\samr]

       o   ncacn_np:myserver[/pipe/samr]

       o   ncacn_np:myserver[samr,sign,print]

       o   ncacn_np:myserver[\\pipe\\samr,sign,seal,bigendian]

       o   ncacn_np:myserver[/pipe/samr,seal,validate]

       o   ncacn_np:

       o   ncacn_np:[/pipe/samr]

       o   ncacn_ip_tcp:myserver

       o   ncacn_ip_tcp:myserver[1024]

       o   ncacn_ip_tcp:myserver[1024,sign,seal]

       o   ncalrpc:

   UNC Format
       The UNC format is:

       //server/share

OPTIONS
       -d debuglevel
	   Use the specified Samba debug level.	A higher debug level means
	   more	output.

       -U user%pass
	   Use the specified username/password combination when	logging	in to
	   a remote server.

       -k
	   Use kerberos	when authenticating.

       -W workgroup
	   Use specified name as our workgroup name.

       -n netbios_name
	   Use specified name as our NetBIOS name.

       -O socket_options
	   Use specified socket	options, equivalent of the smb.conf option
	   "socket options". See the smb.conf(5) manpage for details.

       -m max_protocol
	   Specify the maximum SMB dialect that	should be used.	Possible
	   values are: CORE, COREPLUS, LANMAN1,	LANMAN2, NT1

       -s seed
	   Initialize the randomizer using seed	as seed.

       -L
	   Use oplocks.

       -X
	   Enable dangerous tests. Use with care! This might crash your
	   server...

       -t timelimit
	   Specify the NBENCH time limit in seconds. Defaults to 600.

       -p ports
	   Specify ports to connect to.

       -c file
	   Read	NBENCH commands	from file instead of from CLIENT.TXT.

       -A
	   Show	not just OK or FAILED but more detailed	output.	Used only by
	   DENY	test at	the moment.

       -C filename
	   Load	a list of UNC names from the specified filename. Smbtorture
	   instances will connect to a random host from	this list.

       -N numprocs
	   Specify number of smbtorture	processes to launch.

       -o num_operations
	   Number of times some	operations should be tried before assuming
	   they're output is consistent	(default:100).

       -e num_files
	   Number of entries to	use in certain tests (such as creating X
	   files) (default: 1000).

       -f max_failures
	   Number of failures before aborting a	test (default: 1).

VERSION
       This man	page is	correct	for version 4.0	of the Samba suite.

SEE ALSO
       Samba

AUTHOR
       This utility is part of the Samba[1] suite, which is developed by the
       global Samba Team[2].

       smbtorture was written by Andrew	Tridgell.

       This manpage was	written	by Jelmer Vernooij.

NOTES
	1. Samba
	   http://www.samba.org/

	2. Samba Team
	   http://www.samba.org/samba/team/

Samba 4.0			  03/21/2017			 SMBTORTURE(1)

NAME | SYNOPSIS | DESCRIPTION | OPTIONS | VERSION | SEE ALSO | AUTHOR | NOTES

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=smbtorture&manpath=FreeBSD+12.1-RELEASE+and+Ports>

home | help