Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
sinfo(1)			Slurm Commands			      sinfo(1)

NAME
       sinfo - View information	about Slurm nodes and partitions.

SYNOPSIS
       sinfo [OPTIONS...]

DESCRIPTION
       sinfo  is used to view partition	and node information for a system run-
       ning Slurm.

OPTIONS
       -a, --all
	      Display information about	all partitions.	This  causes  informa-
	      tion  to	be  displayed  about partitions	that are configured as
	      hidden and partitions that are unavailable to the	user's group.

       -d, --dead
	      If set, only report state	information for	non-responding	(dead)
	      nodes.

       -e, --exact
	      If  set,	do not group node information on multiple nodes	unless
	      their configurations to be reported are identical. Otherwise cpu
	      count, memory size, and disk space for nodes will	be listed with
	      the minimum value	followed by a "+" for nodes with the same par-
	      tition and state (e.g. "250+").

       --federation
	      Show all partitions from the federation if a member of one.

       -h, --noheader
	      Do not print a header on the output.

       --help Print a message describing all sinfo options.

       --hide Do  not  display information about hidden	partitions. Partitions
	      that are configured as hidden or are not available to the	user's
	      group will not be	displayed. This	is the default behavior.

       -i <seconds>, --iterate=<seconds>
	      Print  the  state	 on a periodic basis.  Sleep for the indicated
	      number of	seconds	between	reports.  By  default  prints  a  time
	      stamp with the header.

       --local
	      Show  only  jobs local to	this cluster. Ignore other clusters in
	      this federation (if any).	Overrides --federation.

       -l, --long
	      Print more detailed information.	This is	ignored	if the	--for-
	      mat option is specified.

       -M, --clusters=<string>
	      Clusters	to  issue  commands to.	 Multiple cluster names	may be
	      comma separated.	A value	of 'all' will query all	clusters. Note
	      that  the	 SlurmDBD must be up for this option to	work properly.
	      This option implicitly sets the --local option.

       -n <nodes>, --nodes=<nodes>
	      Print information	about the specified node(s).   Multiple	 nodes
	      may  be  comma separated or expressed using a node range expres-
	      sion (e.g. "linux[00-17]") Limiting the query to just the	 rele-
	      vant nodes can measurably	improve	the performance	of the command
	      for large	clusters.

       --noconvert
	      Don't convert units from their original type (e.g.  2048M	 won't
	      be converted to 2G).

       -N, --Node
	      Print  information  in  a	node-oriented format with one line per
	      node and partition. That is, if a	node belongs to	more than  one
	      partition,  then	one  line for each node-partition pair will be
	      shown.  If --partition is	also specified,	then only one line per
	      node in this partition is	shown.	The default is to print	infor-
	      mation in	a partition-oriented format.  This is ignored  if  the
	      --format option is specified.

       -o <output_format>, --format=<output_format>
	      Specify  the  information	 to be displayed using an sinfo	format
	      string.  If the command is executed in a federated cluster envi-
	      ronment  and  information	 about	more than one cluster is to be
	      displayed	and the	-h, --noheader option is used, then the	 clus-
	      ter  name	 will  be  displayed before the	default	output formats
	      shown below.  Format strings transparently used  by  sinfo  when
	      running with various options are:

	      default	     "%#P %.5a %.10l %.6D %.6t %N"

	      --summarize    "%#P %.5a %.10l %.16F  %N"

	      --long	     "%#P  %.5a	%.10l %.10s %.4r %.8h %.10g %.6D %.11T
			     %N"

	      --Node	     "%#N %.6D %#P %6t"

	      --long --Node  "%#N %.6D %#P %.11T %.4c %.8z %.6m	%.8d %.6w %.8f
			     %20E"

	      --list-reasons "%20E %9u %19H %N"

	      --long --list-reasons
			     "%20E %12U	%19H %6t %N"

	      In the above format strings, the use of "#" represents the maxi-
	      mum length of any	partition name or node list to be printed.   A
	      pass  is	made  over  the	records	to be printed to establish the
	      size in order to align the sinfo output, then a second  pass  is
	      made  over  the  records	to  print them.	 Note that the literal
	      character	"#" itself is not a valid field	length	specification,
	      but is only used to document this	behaviour.

	      The format of each field is "%[[.]size]type[suffix]"

		 size	Minimum	 field size. If	no size	is specified, whatever
			is needed to print the information will	be used.

		 .	Indicates the output should  be	 right	justified  and
			size  must  be	specified.   By	default	output is left
			justified.

		 suffix	Arbitrary string to append to the end of the field.

	      Valid type specifications	include:

	      %all  Print all fields available for this	data type with a  ver-
		    tical bar separating each field.

	      %a    State/availability of a partition.

	      %A    Number  of	nodes by state in the format "allocated/idle".
		    Do not use this with a node	state option ("%t" or "%T") or
		    the	 different  node  states  will	be  placed on separate
		    lines.

	      %b    Features currently active on the nodes, also see %f.

	      %B    The	max number of CPUs per node available to jobs  in  the
		    partition.

	      %c    Number of CPUs per node.

	      %C    Number   of	  CPUs	 by   state   in   the	format	"allo-
		    cated/idle/other/total". Do	not use	this with a node state
		    option ("%t" or "%T") or the different node	states will be
		    placed on separate lines.

	      %d    Size of temporary disk space per node in megabytes.

	      %D    Number of nodes.

	      %e    Free memory	of a node.

	      %E    The	reason a node is unavailable (down, drained, or	drain-
		    ing	states).

	      %f    Features available the nodes, also see %b.

	      %F    Number   of	  nodes	  by   state   in  the	format	"allo-
		    cated/idle/other/total".  Note the use of this format  op-
		    tion  with	a node state format option ("%t" or "%T") will
		    result in the different node states	being be  reported  on
		    separate lines.

	      %g    Groups which may use the nodes.

	      %G    Generic resources (gres) associated	with the nodes.

	      %h    Print the OverSubscribe setting for	the partition.

	      %H    Print the timestamp	of the reason a	node is	unavailable.

	      %I    Partition job priority weighting factor.

	      %l    Maximum  time  for	any job	in the format "days-hours:min-
		    utes:seconds"

	      %L    Default time for any job in	 the  format  "days-hours:min-
		    utes:seconds"

	      %m    Size of memory per node in megabytes.

	      %M    PreemptionMode.

	      %n    List of node hostnames.

	      %N    List of node names.

	      %o    List of node communication addresses.

	      %O    CPU	load of	a node.

	      %p    Partition scheduling tier priority.

	      %P    Partition  name followed by	"*" for	the default partition,
		    also see %R.

	      %r    Only user root may initiate	jobs, "yes" or "no".

	      %R    Partition name, also see %P.

	      %s    Maximum job	size in	nodes.

	      %S    Allowed allocating nodes.

	      %t    State of nodes, compact form.

	      %T    State of nodes, extended form.

	      %u    Print the user name	of who set the reason a	 node  is  un-
		    available.

	      %U    Print  the	user name and uid of who set the reason	a node
		    is unavailable.

	      %v    Print the version of the running slurmd daemon.

	      %V    Print the cluster name if running in a federation.

	      %w    Scheduling weight of the nodes.

	      %X    Number of sockets per node.

	      %Y    Number of cores per	socket.

	      %Z    Number of threads per core.

	      %z    Extended processor information: number of sockets,	cores,
		    threads (S:C:T) per	node.

       -O <output_format>, --Format=<output_format>
	      Specify  the information to be displayed.	 Also see the -o <out-
	      put_format>,  --format=<output_format>  option  (which  supports
	      greater  flexibility  in formatting, but does not	support	access
	      to all fields because we ran out of letters).  Requests a	 comma
	      separated	list of	job information	to be displayed.

	      The format of each field is "type[:[.][size][suffix]]"

		 size	The  minimum  field size.  If no size is specified, 20
			characters will	be allocated to	print the information.

		 .	Indicates the output should  be	 right	justified  and
			size  must  be	specified.  By default,	output is left
			justified.

		 suffix	Arbitrary string to append to the end of the field.

	      Valid type specifications	include:

	      All
		     Print all fields available	in the -o format for this data
		     type with a vertical bar separating each field.

	      AllocMem
		     Prints the	amount of allocated memory on a	node.

	      AllocNodes
		     Allowed allocating	nodes.

	      Available
		     State/availability	of a partition.

	      Cluster
		     Print the cluster name if running in a federation.

	      Cores
		     Number of cores per socket.

	      CPUs
		     Number of CPUs per	node.

	      CPUsLoad
		     CPU load of a node.

	      CPUsState
		     Number   of   CPUs	  by   state   in  the	format	"allo-
		     cated/idle/other/total". Do not  use  this	 with  a  node
		     state  option ("%t" or "%T") or the different node	states
		     will be placed on separate	lines.

	      DefaultTime
		     Default time for any job in the  format  "days-hours:min-
		     utes:seconds".

	      Disk
		     Size of temporary disk space per node in megabytes.

	      Features
		     Features available	on the nodes. Also see features_act.

	      features_act
		     Features  currently  active  on  the nodes. Also see fea-
		     tures.

	      FreeMem
		     Free memory of a node.

	      Gres
		     Generic resources (gres) associated with the nodes.

	      GresUsed
		     Generic resources (gres) currently	in use on the nodes.

	      Groups
		     Groups which may use the nodes.

	      MaxCPUsPerNode
		     The max number of CPUs per	node available to jobs in  the
		     partition.

	      Memory
		     Size of memory per	node in	megabytes.

	      NodeAddr
		     List of node communication	addresses.

	      NodeAI
		     Number  of	nodes by state in the format "allocated/idle".
		     Do	not use	this with a node state option ("%t"  or	 "%T")
		     or	 the  different	node states will be placed on separate
		     lines.

	      NodeAIOT
		     Number  of	 nodes	by  state   in	 the   format	"allo-
		     cated/idle/other/total".	Do  not	 use  this with	a node
		     state option ("%t"	or "%T") or the	different node	states
		     will be placed on separate	lines.

	      NodeHost
		     List of node hostnames.

	      NodeList
		     List of node names.

	      Nodes
		     Number of nodes.

	      OverSubscribe
		     Whether  jobs  may	 oversubscribe compute resources (e.g.
		     CPUs).

	      Partition
		     Partition name followed by	"*" for	the default partition,
		     also see %R.

	      PartitionName
		     Partition name, also see %P.

	      Port
		     Node TCP port.

	      PreemptMode
		     Preemption	mode.

	      PriorityJobFactor
		     Partition	factor	used by	priority/multifactor plugin in
		     calculating job priority.

	      PriorityTier or Priority
		     Partition scheduling tier priority.

	      Reason
		     The reason	a  node	 is  unavailable  (down,  drained,  or
		     draining states).

	      Root
		     Only user root may	initiate jobs, "yes" or	"no".

	      Size
		     Maximum job size in nodes.

	      SocketCoreThread
		     Extended processor	information: number of sockets,	cores,
		     threads (S:C:T) per node.

	      Sockets
		     Number of sockets per node.

	      StateCompact
		     State of nodes, compact form.

	      StateLong
		     State of nodes, extended form.

	      Threads
		     Number of threads per core.

	      Time
		     Maximum time for any job in the  format  "days-hours:min-
		     utes:seconds".

	      TimeStamp
		     Print the timestamp of the	reason a node is unavailable.

	      User
		     Print  the	 user name of who set the reason a node	is un-
		     available.

	      UserLong
		     Print the user name and uid of who	set the	reason a  node
		     is	unavailable.

	      Version
		     Print the version of the running slurmd daemon.

	      Weight
		     Scheduling	weight of the nodes.

       -p <partition>, --partition=<partition>
	      Print  information only about the	specified partition(s).	Multi-
	      ple partitions are separated by commas.

       -r, --responding
	      If set only report state information for responding nodes.

       -R, --list-reasons
	      List reasons nodes are in	the down,  drained,  fail  or  failing
	      state.  When nodes are in	these states Slurm supports the	inclu-
	      sion of a	"reason" string	by an administrator.  This option will
	      display  the first 20 characters of the reason field and list of
	      nodes with that reason for all nodes that	are, by	default, down,
	      drained,	draining  or  failing.	 This  option may be used with
	      other node filtering options (e.g. -r,  -d,  -t,	-n),  however,
	      combinations  of	these  options	that result in a list of nodes
	      that are not down	or drained or failing  will  not  produce  any
	      output.	When used with -l the output additionally includes the
	      current node state.

       -s, --summarize
	      List only	a partition state summary with no node state  details.
	      This is ignored if the --format option is	specified.

       -S <sort_list>, --sort=<sort_list>
	      Specification  of	the order in which records should be reported.
	      This uses	the same field specification as	 the  <output_format>.
	      Multiple	sorts may be performed by listing multiple sort	fields
	      separated	by commas.  The	field specifications may  be  preceded
	      by  "+"  or "-" for ascending (default) and descending order re-
	      spectively.  The partition field specification, "P", may be pre-
	      ceded  by	a "#" to report	partitions in the same order that they
	      appear in	Slurm's	 configuration file, slurm.conf.  For example,
	      a	 sort value of "+P,-m" requests	that records be	printed	in or-
	      der of increasing	partition name and within a partition  by  de-
	      creasing	memory	size.	The  default  value of sort is "#P,-t"
	      (partitions ordered as configured	then decreasing	 node  state).
	      If  the --Node option is selected, the default sort value	is "N"
	      (increasing node name).

       -t <states> , --states=<states>
	      List nodes only having the given state(s).  Multiple states  may
	      be comma separated and the comparison is case insensitive.  Pos-
	      sible values include (case insensitive): ALLOC, ALLOCATED, COMP,
	      COMPLETING,  DOWN,  DRAIN	 (for  node  in	 DRAINING  or  DRAINED
	      states), DRAINED,	DRAINING, FAIL,	 FUTURE,  FUTR,	 IDLE,	MAINT,
	      MIX,   MIXED,  NO_RESPOND,  NPC,	PERFCTRS,  POWER_DOWN,	POWER-
	      ING_DOWN,	POWER_UP, RESV,	RESERVED, UNK, and  UNKNOWN.   By  de-
	      fault nodes in the specified state are reported whether they are
	      responding or not.  The --dead and --responding options  may  be
	      used to filter nodes by the corresponding	flag.

       -T, --reservation
	      Only display information about Slurm reservations.

	      NOTE:  This  option  causes  sinfo to ignore most	other options,
	      which are	focused	on partition and node information.

       --usage
	      Print a brief message listing the	sinfo options.

       -v, --verbose
	      Provide detailed event logging through program execution.

       -V, --version
	      Print version information	and exit.

OUTPUT FIELD DESCRIPTIONS
       AVAIL  Partition	state. Can be either up, down, drain,  or  inact  (for
	      INACTIVE). See the partition definition's	State parameter	in the
	      slurm.conf(5) man	page for more information.

       CPUS   Count of CPUs (processors) on these nodes.

       S:C:T  Count of sockets (S), cores (C), and threads (T) on these	nodes.

       SOCKETS
	      Count of sockets on these	nodes.

       CORES  Count of cores on	these nodes.

       THREADS
	      Count of threads on these	nodes.

       GROUPS Resource allocations in this partition  are  restricted  to  the
	      named groups.  all indicates that	all groups may use this	parti-
	      tion.

       JOB_SIZE
	      Minimum and maximum node count that can be allocated to any user
	      job.   A	single	number	indicates the minimum and maximum node
	      count are	the same.  infinite is	used  to  identify  partitions
	      without a	maximum	node count.

       TIMELIMIT
	      Maximum  time  limit for any user	job in days-hours:minutes:sec-
	      onds.  infinite is used to identify  partitions  without	a  job
	      time limit.

       MEMORY Size of real memory in megabytes on these	nodes.

       NODELIST
	      Names of nodes associated	with this particular configuration.

       NODES  Count of nodes with this particular configuration.

       NODES(A/I)
	      Count  of	nodes with this	particular configuration by node state
	      in the form "available/idle".

       NODES(A/I/O/T)
	      Count of nodes with this particular configuration	by node	 state
	      in the form "available/idle/other/total".

       PARTITION
	      Name  of	a  partition.  Note that the suffix "*"	identifies the
	      default partition.

       PORT   Local TCP	port used by slurmd on the node.

       ROOT   Is the ability to	 allocate  resources  in  this	partition  re-
	      stricted to user root, yes or no.

       OVERSUBSCRIBE
	      Whether  jobs  allocated	resources  in  this partition can/will
	      oversubscribe those compute resources (e.g. CPUs).  NO indicates
	      resources	 are  never oversubscribed.  EXCLUSIVE indicates whole
	      nodes are	dedicated to jobs (equivalent to srun --exclusive  op-
	      tion,  may be used even with select/cons_res managing individual
	      processors).  FORCE indicates resources are always available  to
	      be  oversubscribed.   YES	 indicates  resource  may  be oversub-
	      scribed, if requested by the job's resource allocation.

	      NOTE: If OverSubscribe is	set to FORCE or	YES, the OversubScribe
	      value will be appended to	the output.

       STATE  State  of	 the  nodes.  Possible states include: allocated, com-
	      pleting, down, drained, draining,	fail, failing,	future,	 idle,
	      maint,  mixed, perfctrs, power_down, power_up, reserved, and un-
	      known.  Their abbreviated	forms are: alloc, comp,	 down,	drain,
	      drng,  fail, failg, futr,	idle, maint, mix, npc, pow_dn, pow_up,
	      resv, and	unk respectively.

	      NOTE: The	suffix "*" identifies nodes that are presently not re-
	      sponding.

       TMP_DISK
	      Size of temporary	disk space in megabytes	on these nodes.

NODE STATE CODES
       Node  state  codes are shortened	as required for	the field size.	 These
       node states may be followed by a	special	character  to  identify	 state
       flags associated	with the node.	The following node suffixes and	states
       are used:

       *   The node is presently not responding	and will not be	allocated  any
	   new work.  If the node remains non-responsive, it will be placed in
	   the DOWN state (except in the case of COMPLETING,  DRAINED,	DRAIN-
	   ING,	FAIL, FAILING nodes).

       ~   The	node is	presently in a power saving mode (typically running at
	   reduced frequency).

       #   The node is presently being powered up or configured.

       %   The node is presently being powered down.

       $   The node is currently in a reservation with a flag value of	"main-
	   tenance".

       @   The node is pending reboot.

       ALLOCATED   The node has	been allocated to one or more jobs.

       ALLOCATED+  The	node  is allocated to one or more active jobs plus one
		   or more jobs	are in the process of COMPLETING.

       COMPLETING  All jobs associated with this node are in  the  process  of
		   COMPLETING.	 This  node  state will	be removed when	all of
		   the job's processes have terminated and  the	 Slurm	epilog
		   program  (if	 any) has terminated. See the Epilog parameter
		   description in the slurm.conf(5) man	page for more informa-
		   tion.

       DOWN	   The	node  is  unavailable for use. Slurm can automatically
		   place nodes in this state if	some  failure  occurs.	System
		   administrators  may	also  explicitly  place	 nodes in this
		   state. If a node resumes normal operation, Slurm can	 auto-
		   matically return it to service. See the ReturnToService and
		   SlurmdTimeout parameter descriptions	in  the	 slurm.conf(5)
		   man page for	more information.

       DRAINED	   The	node  is  unavailable for use per system administrator
		   request.  See the update node command  in  the  scontrol(1)
		   man	page  or  the slurm.conf(5) man	page for more informa-
		   tion.

       DRAINING	   The node is currently executing a job, but will not be  al-
		   located  additional jobs. The node state will be changed to
		   state DRAINED when the last job on it completes. Nodes  en-
		   ter	this  state  per system	administrator request. See the
		   update node command in the  scontrol(1)  man	 page  or  the
		   slurm.conf(5) man page for more information.

       FAIL	   The	node  is  expected to fail soon	and is unavailable for
		   use per system administrator	request.  See the update  node
		   command  in	the  scontrol(1) man page or the slurm.conf(5)
		   man page for	more information.

       FAILING	   The node is currently executing a job, but is  expected  to
		   fail	soon and is unavailable	for use	per system administra-
		   tor request.	 See the update	 node  command	in  the	 scon-
		   trol(1) man page or the slurm.conf(5) man page for more in-
		   formation.

       FUTURE	   The node is currently not fully configured, but expected to
		   be  available  at  some  point in the indefinite future for
		   use.

       IDLE	   The node is not allocated to	any jobs and is	available  for
		   use.

       MAINT	   The node is currently in a reservation with a flag value of
		   "maintenance".

       REBOOT	   The node is currently scheduled to be rebooted.

       MIXED	   The node has	some of	its CPUs ALLOCATED  while  others  are
		   IDLE.

       PERFCTRS	(NPC)
		   Network  Performance	Counters associated with this node are
		   in use, rendering this node as not  usable  for  any	 other
		   jobs

       POWER_DOWN  The	node is	currently powered down and not capable of run-
		   ning	any jobs.

       POWERING_DOWN
		   The node is in the process of powering down and not capable
		   of running any jobs.

       POWER_UP	   The node is in the process of being powered up.

       RESERVED	   The	node  is  in an	advanced reservation and not generally
		   available.

       UNKNOWN	   The Slurm controller	has just started and the node's	 state
		   has not yet been determined.

PERFORMANCE
       Executing  sinfo	 sends a remote	procedure call to slurmctld. If	enough
       calls from sinfo	or other Slurm client commands that send remote	proce-
       dure  calls to the slurmctld daemon come	in at once, it can result in a
       degradation of performance of the slurmctld daemon, possibly  resulting
       in a denial of service.

       Do not run sinfo	or other Slurm client commands that send remote	proce-
       dure calls to slurmctld from loops in shell scripts or other  programs.
       Ensure  that programs limit calls to sinfo to the minimum necessary for
       the information you are trying to gather.

ENVIRONMENT VARIABLES
       Some sinfo options may be set via environment variables.	These environ-
       ment  variables,	along with their corresponding options,	are listed be-
       low.  NOTE: Command line	options	will always override these settings.

       SINFO_ALL	   Same	as -a, --all

       SINFO_FEDERATION	   Same	as --federation

       SINFO_FORMAT	   Same	as -o  <output_format>,	 --format=<output_for-
			   mat>

       SINFO_LOCAL	   Same	as --local

       SINFO_PARTITION	   Same	as -p <partition>, --partition=<partition>

       SINFO_SORT	   Same	as -S <sort>, --sort=<sort>

       SLURM_CLUSTERS	   Same	as --clusters

       SLURM_CONF	   The location	of the Slurm configuration file.

       SLURM_TIME_FORMAT   Specify  the	 format	 used to report	time stamps. A
			   value of standard,  the  default  value,  generates
			   output	     in		   the		  form
			   "year-month-dateThour:minute:second".  A  value  of
			   relative  returns  only "hour:minute:second"	if the
			   current day.	 For other dates in the	 current  year
			   it  prints  the  "hour:minute" preceded by "Tomorr"
			   (tomorrow), "Ystday"	(yesterday), the name  of  the
			   day	for the	coming week (e.g. "Mon", "Tue",	etc.),
			   otherwise the date  (e.g.  "25  Apr").   For	 other
			   years  it  returns  a date month and	year without a
			   time	(e.g.  "6 Jun 2012"). All of the  time	stamps
			   use a 24 hour format.

			   A  valid  strftime()	 format	can also be specified.
			   For example,	a value	of "%a %T" will	report the day
			   of the week and a time stamp	(e.g. "Mon 12:34:56").

EXAMPLES
       Report basic node and partition configurations:

       > sinfo
       PARTITION AVAIL TIMELIMIT NODES STATE  NODELIST
       batch	 up	infinite     2 alloc  adev[8-9]
       batch	 up	infinite     6 idle   adev[10-15]
       debug*	 up	   30:00     8 idle   adev[0-7]

       Report partition	summary	information:

       > sinfo -s
       PARTITION AVAIL TIMELIMIT NODES(A/I/O/T)	NODELIST
       batch	 up	infinite 2/6/0/8	adev[8-15]
       debug*	 up	   30:00 0/8/0/8	adev[0-7]

       Report more complete information	about the partition debug:

       > sinfo --long --partition=debug
       PARTITION AVAIL TIMELIMIT JOB_SIZE ROOT OVERSUBS	GROUPS NODES STATE NODELIST
       debug*	 up	   30:00	8 no   no	all	   8 idle  dev[0-7]

       Report only those nodes that are	in state DRAINED:

       > sinfo --states=drained
       PARTITION AVAIL NODES TIMELIMIT STATE  NODELIST
       debug*	 up	   2	 30:00 drain  adev[6-7]

       Report node-oriented information	with details and exact matches:

       > sinfo -Nel
       NODELIST	   NODES PARTITION STATE  CPUS MEMORY TMP_DISK WEIGHT FEATURES REASON
       adev[0-1]       2 debug*	   idle	     2	 3448	 38536	   16 (null)   (null)
       adev[2,4-7]     5 debug*	   idle	     2	 3384	 38536	   16 (null)   (null)
       adev3	       1 debug*	   idle	     2	 3394	 38536	   16 (null)   (null)
       adev[8-9]       2 batch	   allocated 2	  246	 82306	   16 (null)   (null)
       adev[10-15]     6 batch	   idle	     2	  246	 82306	   16 (null)   (null)

       Report only down, drained and draining nodes and	their reason field:

       > sinfo -R
       REASON				   NODELIST
       Memory errors			   dev[0,5]
       Not Responding			   dev8

COPYING
       Copyright  (C)  2002-2007  The Regents of the University	of California.
       Produced	at Lawrence Livermore National Laboratory (cf, DISCLAIMER).
       Copyright (C) 2008-2009 Lawrence	Livermore National Security.
       Copyright (C) 2010-2017 SchedMD LLC.

       This file is part of Slurm, a resource  management  program.   For  de-
       tails, see <https://slurm.schedmd.com/>.

       Slurm  is free software;	you can	redistribute it	and/or modify it under
       the terms of the	GNU General Public License as published	 by  the  Free
       Software	 Foundation;  either version 2 of the License, or (at your op-
       tion) any later version.

       Slurm is	distributed in the hope	that it	will be	 useful,  but  WITHOUT
       ANY  WARRANTY;  without even the	implied	warranty of MERCHANTABILITY or
       FITNESS FOR A PARTICULAR	PURPOSE.  See the GNU General  Public  License
       for more	details.

SEE ALSO
       scontrol(1),  squeue(1),	 slurm_load_ctl_conf (3), slurm_load_jobs (3),
       slurm_load_node (3), slurm_load_partitions (3), slurm_reconfigure  (3),
       slurm_shutdown	(3),   slurm_update_job	 (3),  slurm_update_node  (3),
       slurm_update_partition (3), slurm.conf(5)

October	2020			Slurm Commands			      sinfo(1)

NAME | SYNOPSIS | DESCRIPTION | OPTIONS | OUTPUT FIELD DESCRIPTIONS | NODE STATE CODES | PERFORMANCE | ENVIRONMENT VARIABLES | EXAMPLES | COPYING | SEE ALSO

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=sinfo&sektion=1&manpath=FreeBSD+13.0-RELEASE+and+Ports>

home | help