Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
SCHISMTRACKER(1)	    General Commands Manual	      SCHISMTRACKER(1)

NAME
       schismtracker - tracked music editor based on Impulse Tracker

SYNOPSIS
       schismtracker [options] [directory] [file]

DESCRIPTION
       schismtracker  is  a tracked music module editor	that aims to match the
       look and	feel of	Impulse	Tracker	as closely as possible.	 It  can  load
       most  common  tracker  formats,	supports saving	as IT and S3M, and can
       also export to WAV and AIFF.

OPTIONS
       -a, --audio-driver=DRIVER[:DEVICE]
	      Audio device configuration. driver is the	 SDL  driver  to  use,
	      e.g.   alsa  (ALSA), dma or dsp (OSS); device is the name	of the
	      device itself, for example hw:2 or /dev/dsp1.

       -v, --video-driver=DRIVER
	      SDL video	driver,	such as	x11, dga, or fbcon. Note that this  is
	      different	 from the video	driver setting within the program, and
	      is unlikely to be	useful.

       --video-yuvlayout=LAYOUT
	      Specific YUV layout to use: YUY2,	 YV12,	RGBA,  etc.   This  is
	      probably best left alone under normal circumstances.

       --video-size=WIDTHxHEIGHT
	      Set the size of the video	display.

       --video-stretch=VALUE
	      Fix the aspect ratio. (Probably does nothing!)

       --video-gl-path=PATH
	      Specify path of OpenGL library.

       --video-depth=DEPTH
	      Specify display depth, in	bits.

       --video-fb-device=DEVICE
	      Specify path to framebuffer. Typical value is /dev/fb0.

       --network, --no-network
	      Enable/disable  networking  (on  by default). Used for MIDI over
	      IP.

       --classic, --no-classic
	      Start Schism Tracker in "classic"	mode, or don't.	This is	mostly
	      cosmetic,	  although  it	does  change  the  program's  behavior
	      slightly in a few	places.

       --display=DISPLAY
	      X11 display to use.

       -f, -F, --fullscreen, --no-fullscreen
	      Enable/disable fullscreen	mode at	startup.

       -p, -P, --play, --no-play
	      Start playing after loading song on command line.

       --diskwrite=FILENAME
	      Render output to a file, and then	exit. WAV or  AIFF  writer  is
	      auto-selected  based  on file extension. Include %c somewhere in
	      the name to write	each channel separately. This  is  meaningless
	      if no initial filename is	given.

       --font-editor, --no-font-editor
	      Run the font editor (itf). This can also be accessed by pressing
	      Shift-F12.

       --hooks,	--no-hooks
	      Run hooks. Enabled by default.

       --debug=FLAGS
	      Enable some debugging flags (separated by	commas).  You probably
	      don't need this.

       --version
	      Display version information and build date.

       -h, --help
	      Print a summary of available options.

       A  filename  supplied  on  the  command line will be loaded at startup.
       Additionally, if	either a file or directory name	is given, the  default
       module, sample, and instrument paths will be set	accordingly.

USAGE
       A  detailed  discussion	of how to use Schism Tracker is	far beyond the
       scope of	this document, but here	is a very brief	rundown	of the basics.
       Context-sensitive  help	can  be	accessed at any	time while running the
       program by pressing F1.

       The F3 key will bring you to the	sample list. Press enter here to  open
       a  file browser,	navigate in the	list using the up/down arrow keys, and
       hit enter again to load a sample. You will  likely  want	 to  get  some
       samples to work with. You can also "rip"	from existing modules; see for
       example	http://www.modarchive.org/  for	 a  very  large	 selection  of
       modules.	 (Keep	in  mind,  however, that some authors don't appreciate
       having their samples ripped!)

       Now that	you've loaded a	sample,	press F2 to get	to the pattern editor.
       This  is	 where	the majority of	the composition	takes place. In	short,
       the song	is laid	out vertically,	with each row representing 1/16	 note;
       to  play	 multiple  notes  simultaneously, they are placed in different
       channels.  The four sub-columns of each channel are  the	 note,	sample
       number,	volume,	 and  effect.  A  list	of effects is available	in the
       pattern editor help, but	you can	safely ignore  that  column  for  now.
       Assuming	a US keymap, notes are entered with the	keyboard as follows:
	   (Note)	 C# D#	  F# G#	A#    C# D#    F# G# A#	   C# D#
		      |	| || | | | || || | | | || | | |	|| || |	| | || | |
		      |	| || | | | || || | | | || | | |	|| || |	| | || | |
	   (What you  |	|S||D| | |G||H||J| | |2||3| | |5||6||7|	| |9||0| |
	    type)     |	'-''-' | '-''-''-' | '-''-' | '-''-''-'	| '-''-' |
		      |	Z| X| C| V| B| N| M| Q|	W| E| R| T| Y| U| I| O|	P|
		      '--'--'--'--'--'--'--'--'--'--'--'--'--'--'--'--'--'
	   (Note)	C  D  E	 F  G  A  B  C	D  E  F	 G  A  B  C  D	E
		       (Octave 0)	    (Octave 1)		 (Octave 2)

       The  "/"	 and  "*"  keys	 on the	numeric	keypad change octaves, and the
       current octave is displayed near	the top	 of  the  screen.  Try	typing
       "qwerty"	 into  the pattern - it	will enter an ascending	note sequence,
       and you'll hear the notes as they're entered. (of course, assuming  you
       loaded a	sample!) Press F6 to play your pattern,	and F8 to stop.

       Other  important	 keys  for the pattern editor include Ins/Del to shift
       notes up	and down within	a channel, Shift-Arrows	to mark	a block,  Alt-
       C/Alt-P	to copy	and paste, and Alt-U to	clear the mark.	There are well
       over a hundred key bindings for the pattern editor; it  is  well	 worth
       the effort to learn them	all eventually.

       Now  that  you have something in	your pattern, you'll need to set up an
       orderlist. Press	F11 to switch to the orderlist page, and type 0	to add
       the  pattern  you created. Now press F5 to start	playing. The song will
       begin at	the first order, look up the  pattern  number  and  play  that
       pattern,	then advance to	the next order,	and so forth.

       Of  course,  having  only one pattern isn't all that interesting, so go
       back to the pattern editor and press the	+ key to change	 to  the  next
       pattern.	 Now  you can write another four bars of music and add the new
       pattern to the orderlist, and the next time you play the	song, your two
       patterns	will play in sequence.

       You  may	 wish  to give your song a title; press	F12 and	type a name in
       the box at the top. You can also	adjust the tempo and a number of other
       settings	 on  this  page,  but  for now,	most of	them are fine at their
       default values.

       To save your new	song, press F10, type a	filename, and hit  enter.  You
       can load	it again later by pressing F9.

       This  tutorial  has deliberately	omitted	the instrument editor (on F4),
       for the purposes	of brevity and simplicity. You may want	to  experiment
       with  it	 once  you  have  a  feel  for	how the	program	works. (Select
       "instruments" on	F12 to enable instrument mode.)

HISTORY
       Storlek began studying Impulse Tracker's	design in 2002,	noting	subtle
       details	of  the	design and implementation. Posts on the	Modplug	forums
       about rewriting Impulse Tracker were met	with ridicule and mockery. "It
       can't be	done," they said.

       Schism  Tracker	v0.031a	 was released in July 2003, though very	little
       worked at that point, and it  was  more	of  a  player  with  primitive
       editing capabilities.  File saving was hard-coded to write to "test.it"
       in the current directory, and there was no way to load a	sample.

       The first version that was more or less usable was 0.15a, from December
       2004.

       From  2005  through  2009, Mrs. Brisby did most of the development, and
       implemented tons	of features, including MIDI  support,  mouse  support,
       and disk	writing.

       Storlek	"took  over"  development  again  in  2009,  and incrementally
       rewrote much of the code	through	2015.

       In  2016,  Schism  Tracker   was	  moved	  to   GitHub	under	shared
       maintainership.	Since  then, many people have contributed improvements
       and bug fixes to	the codebase.

FILES
       ~/.schism/config
	      Program settings,	stored in an INI-style	format.	 Most  options
	      are accessible from within Schism	Tracker's interface, but there
	      are a few	"hidden" options.

       ~/.schism/startup-hook, ~/.schism/exit-hook, ~/.schism/diskwriter-hook
	      Optional	files  to  execute  upon  certain  events.  (Must   be
	      executable)

       ~/.schism/fonts/
	      font.cfg,	 and  any  .itf	 files	found  in  this	directory, are
	      displayed	in the file browser of the font	editor.

   Supported file formats
       MOD    Amiga modules (with some obscure variants	such as	FLT8)

       669    Composer 669 / Unis669

       MTM    MultiTracker

       S3M    Scream Tracker 3 (including Adlib	support)

       XM     Fast Tracker 2

       IT     Impulse Tracker (including old instrument	format)

       MDL    Digitrakker 3

       IMF    Imago Orpheus

       OKT    Amiga Oktalyzer

       SFX    Sound FX

       MUS    Doom engine (percussion missing)

       FAR    Farandole	Composer

       STM    Scream Tracker 2 (partial	functionality)

       ULT    UltraTracker (partial functionality)

       S3I    Scream Tracker 3 sample

       WAV    Microsoft	WAV audio

       AIFF   Audio IFF	(Apple)

       8SVX   Amiga 8SVX sample

       ITS    Impulse Tracker sample

       AU     Sun/NeXT Audio

       RAW    Headerless sample	data

       PAT    Gravis UltraSound	patch

       XI     Fast Tracker 2 instrument

       ITI    Impulse Tracker instrument

       Schism Tracker is able to save modules in IT  and  S3M  format,	sample
       data  as	 ITS,  S3I,  AIFF,  AU,	 WAV, and RAW, and instruments as ITI.
       Additionally, it	can render to WAV and AIFF  (optionally	 writing  each
       channel to a separate file), and	can export MID files.

AUTHORS
       Schism Tracker was written by Storlek and Mrs. Brisby, with player code
       from Modplug by Olivier Lapicque. Based on Impulse Tracker  by  Jeffrey
       Lim.

       Additional code and data	have been contributed by many others; refer to
       the file	AUTHORS	in the source distribution for a more complete list.

       The keyboard diagram in this manual page	was adapted from the one  used
       in  the	documentation  for  Impulse Tracker, which in turn borrowed it
       from Scream Tracker 3.

COPYRIGHT
       Copyright (C) 2003-2019 Storlek,	Mrs. Brisby et al. Licensed under  the
       GNU  GPL	<http://gnu.org/licenses/gpl.html>. This is free software: you
       are free	to change and redistribute it. There is	NO  WARRANTY,  to  the
       extent permitted	by law.

BUGS
       They	   almost	 certainly	  exist.	Post	    on
       https://github.com/schismtracker/schismtracker/issues if	you find  one.
       Agitha shares her happiness with	benefactors of the insect kingdom.

INTERNETS
       http://schismtracker.org/ - main	website
       #schismtracker on EsperNet - IRC	channel

SEE ALSO
       chibitracker(1),	 milkytracker(1),  protracker(1),  renoise(1), ocp(1),
       xmp(1)

				 Jun 14, 2019		      SCHISMTRACKER(1)

NAME | SYNOPSIS | DESCRIPTION | OPTIONS | USAGE | HISTORY | FILES | AUTHORS | COPYRIGHT | BUGS | INTERNETS | SEE ALSO

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=schismtracker&sektion=1&manpath=FreeBSD+12.2-RELEASE+and+Ports>

home | help