Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
sccs-admin(1)			 User Commands			 sccs-admin(1)

NAME
       sccs-admin, admin - create and administer SCCS history files

SYNOPSIS
       /usr/ccs/bin/admin  [-bhnz]  [-a	username  | groupid] ... [-d flag] ...
       [-e username | groupid] ... [ -f	flag [value]] ... [  -i	 [filename  ]]
       [-m mr-list]  [-rrelease]  [  -t	 [description-file]]  [	 -y [comment]]
       s.filename...

DESCRIPTION
       The admin command creates or modifies the flags and other parameters of
       SCCS history files. Filenames of	SCCS history files begin with the `s.'
       prefix, and are referred	to as s.files, or ``history'' files.

       The named s.file	is created if it does not exist	already.  Its  parame-
       ters  are initialized or	modified according to the options you specify.
       Parameters not specified	are given default values when the file is ini-
       tialized, otherwise they	remain unchanged.

       If  a  directory	 name is used in place of the s.filename argument, the
       admin command applies to	all s.files  in	 that  directory.   Unreadable
       s.files	produce	 an  error.  The use of	`-' as the s.filename argument
       indicates that the names	of files are to	be read	from the standard  in-
       put, one	s.file per line.

OPTIONS
       The following options are supported:

       -b    Force  encoding  of binary	data.  Files that contain ASCII	NUL or
	     other control characters, or that do not end with a NEWLINE,  are
	     recognized	 as binary data	files.	The contents of	such files are
	     stored in the history file	in encoded form.  See uuencode(1C) for
	     details  about the	encoding. This option is normally used in con-
	     junction with -i to force admin to	encode	initial	 versions  not
	     recognized	as containing binary data.

       -h    Check  the	structure of an	existing s.file	(see sccsfile(4)), and
	     compare a newly computed check-sum	with one stored	in  the	 first
	     line of that file.	-h inhibits writing on the file; and so	nulli-
	     fies the effect of	any other options.

       -n    Create a new SCCS history file.

       -z    Recompute the file	check-sum and store it in the  first  line  of
	     the  s.file.  Caution:  it	is important to	verify the contents of
	     the history file (see sccs-val(1),	and the	 print	subcommand  in
	     sccs(1)),	since  using  -z on a truly corrupted file may prevent
	     detection of the error.

       -a username | groupid
	     Add a user	name, or a numerical group ID, to the  list  of	 users
	     who may check deltas in or	out. If	the list is empty, any user is
	     allowed to	do so.

       -d flag
	     Delete the	indicated flag from the	SCCS file.  The	-d option  may
	     be	 specified  only  for existing s.files.	See -f for the list of
	     recognized	flags.

       -e username | groupid
	     Erase a user name or group	ID from	the list of users  allowed  to
	     make deltas.

       -f flag [value]
	     Set  the  indicated  flag to the (optional) value specified.  The
	     following flags are recognized:

	     b	   Enable branch deltas.  When b is set, branches can be  cre-
		   ated	using the -b option of the SCCS	get command (see sccs-
		   get(1)).

	     cceil Set a ceiling on the	releases that can be checked out. ceil
		   is  a  number  less than or equal to	9999. If c is not set,
		   the ceiling is 9999.

	     ffloor
		   Set a floor on the releases that can	be  checked  out.  The
		   floor is a number greater than 0 but	less than 9999.
		    If f is not	set, the floor is 1.

	     dsid  The	default	 delta	number,	or  SID, to be used by an SCCS
		   get command.

	     i	   Treat the `No id keywords (ge6)' message issued by an  SCCS
		   get or delta	command	as an error rather than	a warning.

	     j	   Allow concurrent updates.

	     la

	     l release[, release...]
		   Lock	the indicated list of releases against deltas. If a is
		   used, lock out deltas to all	releases.  An  SCCS  `get  -e'
		   command fails when applied against a	locked release.

	     n	   Create  empty  releases  when  releases are skipped.	 These
		   null	(empty)	deltas	serve  as  anchor  points  for	branch
		   deltas.

	     qvalue
		   Supply  a   value to	which the  keyword is to expand	when a
		   read-only version is	retrieved with the SCCS	get command.

	     mmodule
		   Supply a value for the module name to  which	 the  sccs-ad-
		   min.1 keyword is to expand. If the m	flag is	not specified,
		   the value assigned is the name of the SCCS  file  with  the
		   leading s. removed.

	     ttype Supply a value for the module type to which the  keyword is
		   to expand.

	     v[program]
		   Specify a validation	program	for the	MR numbers  associated
		   with	 a  new	delta. The optional program specifies the name
		   of an MR number validity checking program. If this flag  is
		   set	when creating an SCCS file, the	-m option must also be
		   used, in which case the list	of MRs may be empty.

       -i[filename]
	     Initialize	the history file with text from	 the  indicated	 file.
	     This  text	 constitutes  the  initial delta, or set of checked-in
	     changes. If filename is omitted, the  initial  text  is  obtained
	     from  the	standard input.	Omitting the -i	option altogether cre-
	     ates an empty s.file. You can only	 initialize  one  s.file  with
	     text using	-i. This option	implies	the -n option.

       -m mr-list
	     Insert  the  indicated Modification Request (MR) numbers into the
	     commentary	for the	initial	version. When specifying more than one
	     MR	 number	 on  the  command  line,  mr-list  takes the form of a
	     quoted, space-separated list. A warning results if	the v flag  is
	     not set or	the MR validation fails.

       -rrelease
	     Specify the release for the initial delta.	-r may be used only in
	     conjunction with -i. The initial delta is inserted	into release 1
	     if	this option is omitted.	 The level of the initial delta	is al-
	     ways 1; initial deltas are	named 1.1 by default.

       -t[description-file]
	     Insert descriptive	text from the file description-file. When   -t
	     is	used in	conjunction with -n, or	-i to initialize a new s.file,
	     the description-file must be supplied.  When  modifying  the  de-
	     scription	for  an	 existing file:	a -t option without a descrip-
	     tion-file removes the descriptive text, if	any; a -t option  with
	     a description-file	replaces the existing text.

       -y[comment]
	     Insert  the  indicated comment in the ``Comments:'' field for the
	     initial delta.  Valid only	in conjunction with -i or  -n.	If  -y
	     option  is	omitted, a default comment line	is inserted that notes
	     the date and time the history file	was created.

EXIT STATUS
       The following exit values are returned:

       0     Successful	completion.

       1     An	error occurred.

FILES
       s.*   history file

       SCCS/s.*
	     history file in SCCS subdirectory

       z.*   temporary lock file

ATTRIBUTES
       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE	TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWsprot			   |
       +-----------------------------+-----------------------------+

SEE ALSO
       sccs(1),	sccs-cdc(1), sccs-delta(1), sccs-get(1),  sccs-help(1),	 sccs-
       rmdel(1), sccs-val(1), sccsfile(4), attributes(5)

DIAGNOSTICS
       Use the SCCS help command for explanations (see sccs-help(1)).

WARNINGS
       The  last  component  of	all  SCCS filenames must have the `s.' prefix.
       New  SCCS files are given mode 444 (see chmod(1)). All writing done  by
       admin  is  to a temporary file with an x. prefix, created with mode 444
       for a new SCCS file, or with the	same mode as an	 existing  SCCS	 file.
       After  successful  execution  of	admin, the existing s. file is removed
       and replaced with the  x.file. This ensures that	changes	 are  made  to
       the   SCCS file only when no errors have	occurred.

       It  is recommended that directories containing  SCCS files have permis-
       sion mode 755, and that the  s.files  themselves	 have  mode  444.  The
       mode  for  directories  allows  only the	owner to modify	the SCCS files
       contained in the	directories, while the mode of the   s.files  prevents
       all modifications except	those performed	using SCCS commands.

       If  it  should  be necessary to patch an	 SCCS file for any reason, the
       mode may	be changed to 644 by the owner to allow	use of a text  editor.
       However,	 extreme  care	must be	taken when doing this. The edited file
       should always be	processed by an	`admin -h' to  check  for  corruption,
       followed	by an `admin -z' to generate a proper check-sum.  Another `ad-
       min -h' is recommended to ensure	that the resulting s.file is valid.

       admin also uses a temporary lock	s.file,	starting with the `z.' prefix,
       to prevent simultaneous updates to the s.file. See sccs-get(1) for fur-
       ther information	about the `z.file'.

SunOS 5.9			  1 Nov	1999			 sccs-admin(1)

NAME | SYNOPSIS | DESCRIPTION | OPTIONS | EXIT STATUS | FILES | ATTRIBUTES | SEE ALSO | DIAGNOSTICS | WARNINGS

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=sccs-admin&sektion=1&manpath=SunOS+5.9>

home | help