FreeBSD Manual Pages
scancel(1) Slurm Commands scancel(1) NAME scancel - Used to signal jobs or job steps that are under the control of Slurm. SYNOPSIS scancel [OPTIONS...] [job_id[_array_id][.step_id]] [job_id[_ar- ray_id][.step_id]...] DESCRIPTION scancel is used to signal or cancel jobs, job arrays or job steps. An arbitrary number of jobs or job steps may be signaled using job speci- fication filters or a space separated list of specific job and/or job step IDs. If the job ID of a job array is specified with an array ID value then only that job array element will be cancelled. If the job ID of a job array is specified without an array ID value then all job array elements will be cancelled. While a heterogeneous job is in pending state, only the entire job can be cancelled rather than its in- dividual components. A request to cancel an individual component of a heterogeneous job not in pending state will return an error. After the job has begun execution, the individual component can be cancelled. A job or job step can only be signaled by the owner of that job or user root. If an attempt is made by an unauthorized user to signal a job or job step, an error message will be printed and the job will not be sig- naled. OPTIONS -A, --account=account Restrict the scancel operation to jobs under this charge ac- count. -b, --batch By default, signals other than SIGKILL are not sent to the batch step (the shell script). With this option scancel signals only the batch step, but not any other steps. This is useful when the shell script has to trap the signal and take some applica- tion defined action. Note that most shells cannot handle sig- nals while a command is running (child process of the batch step), the shell use to wait until the command ends to then han- dle the signal. Children of the batch step are not signaled with this option, use -f, --full instead. NOTE: If used with -f, --full, this option ignored. NOTE: This option is not applica- ble if step_id is specified. NOTE: The shell itself may exit upon receipt of many signals. You may avoid this by explicitly trap signals within the shell script (e.g. "trap <arg> <sig- nals>"). See the shell documentation for details. --ctld Send the job signal request to the slurmctld daemon rather than directly to the slurmd daemons. This increases overhead, but of- fers better fault tolerance. This is the default behavior on architectures using front end nodes (e.g. Cray ALPS computers) or when the --clusters option is used. -f, --full By default, signals other than SIGKILL are not sent to the batch step (the shell script). With this option scancel signals also the batch script and its children processes. Most shells cannot handle signals while a command is running (child process of the batch step), the shell use to wait until the command ends to then handle the signal. Unlike -b, --batch, children of the batch step are also signaled with this option. NOTE: srun steps are also children of the batch step, so steps are also signaled with this option. --help Print a help message describing all scancel options. -H, --hurry Do not stage out any burst buffer data. -i, --interactive Interactive mode. Confirm each job_id.step_id before performing the cancel operation. -M, --clusters=<string> Cluster to issue commands to. Implies --ctld. Note that the SlurmDBD must be up for this option to work properly. -n, --jobname=job_name, --name=job_name Restrict the scancel operation to jobs with this job name. -p, --partition=partition_name Restrict the scancel operation to jobs in this partition. -q, --qos=qos Restrict the scancel operation to jobs with this quality of ser- vice. -Q, --quiet Do not report an error if the specified job is already com- pleted. This option is incompatible with the --verbose option. -R, --reservation=reservation_name Restrict the scancel operation to jobs with this reservation name. --sibling=cluster_name Remove an active sibling job from a federated job. -s, --signal=signal_name The name or number of the signal to send. If this option is not used the specified job or step will be terminated. Note. If this option is used the signal is sent directly to the slurmd where the job is running bypassing the slurmctld thus the job state will not change even if the signal is delivered to it. Use the scontrol command if you want the job state change be known to slurmctld. -t, --state=job_state_name Restrict the scancel operation to jobs in this state. job_state_name may have a value of either "PENDING", "RUNNING" or "SUSPENDED". -u, --user=user_name Restrict the scancel operation to jobs owned by this user. --usage Print a brief help message listing the scancel options. -v, --verbose Print additional logging. Multiple v's increase logging detail. This option is incompatible with the --quiet option. -V, --version Print the version number of the scancel command. -w, --nodelist=host1,host2,... Cancel any jobs using any of the given hosts. The list may be specified as a comma-separated list of hosts, a range of hosts (host[1-5,7,...] for example), or a filename. The host list will be assumed to be a filename only if it contains a "/" character. --wckey=wckey Restrict the scancel operation to jobs using this workload char- acterization key. ARGUMENTS job_id The Slurm job ID to be signaled. step_id The step ID of the job step to be signaled. If not specified, the operation is performed at the level of a job. If neither --batch nor --signal are used, the entire job will be terminated. When --batch is used, the batch shell processes will be sig- naled. The child processes of the shell will not be signaled by Slurm, but the shell may forward the signal. When --batch is not used but --signal is used, then all job steps will be signaled, but the batch script itself will not be signaled. PERFORMANCE Executing scancel sends a remote procedure call to slurmctld. If enough calls from scancel or other Slurm client commands that send remote pro- cedure calls to the slurmctld daemon come in at once, it can result in a degradation of performance of the slurmctld daemon, possibly result- ing in a denial of service. Do not run scancel or other Slurm client commands that send remote pro- cedure calls to slurmctld from loops in shell scripts or other pro- grams. Ensure that programs limit calls to scancel to the minimum nec- essary for the information you are trying to gather. ENVIRONMENT VARIABLES Some scancel options may be set via environment variables. These envi- ronment variables, along with their corresponding options, are listed below. (Note: commandline options will always override these settings) SCANCEL_ACCOUNT -A, --account=account SCANCEL_BATCH -b, --batch SCANCEL_CTLD --ctld SCANCEL_FULL -f, --full SCANCEL_HURRY -H, --hurry SCANCEL_INTERACTIVE -i, --interactive SCANCEL_NAME -n, --name=job_name SCANCEL_PARTITION -p, --partition=partition_name SCANCEL_QOS -q, --qos=qos SCANCEL_STATE -t, --state=job_state_name SCANCEL_USER -u, --user=user_name SCANCEL_VERBOSE -v, --verbose SCANCEL_WCKEY --wckey=wckey SLURM_CONF The location of the Slurm configuration file. SLURM_CLUSTERS -M, --clusters NOTES If multiple filters are supplied (e.g. --partition and --name) only the jobs satisfying all of the filtering options will be signaled. Cancelling a job step will not result in the job being terminated. The job must be cancelled to release a resource allocation. To cancel a job, invoke scancel without --signal option. This will send first a SIGCONT to all steps to eventually wake them up followed by a SIGTERM, then wait the KillWait duration defined in the slurm.conf file and finally if they have not terminated send a SIGKILL. This gives time for the running job/step(s) to clean up. If a signal value of "KILL" is sent to an entire job, this will cancel the active job steps but not cancel the job itself. On Cray systems, all signals except SIGCHLD, SIGCONT, SIGSTOP, SIGTSTP, SIGTTIN, SIGTTOU, SIGURG, or SIGWINCH cause the ALPS reservation to be released. The job however will not be terminated except in the case of SIGKILL and may then be used for post processing. AUTHORIZATION When using SlurmDBD, users who have an AdminLevel defined (Operator or Admin) and users who are account coordinators are given the authority to invoke scancel on other users jobs. EXAMPLES Send SIGTERM to steps 1 and 3 of job 1234: scancel --signal=TERM 1234.1 1234.3 Cancel job 1234 along with all of its steps: scancel 1234 Send SIGKILL to all steps of job 1235, but do not cancel the job it- self: scancel --signal=KILL 1235 Send SIGUSR1 to the batch shell processes of job 1236: scancel --signal=USR1 --batch 1236 Cancel job all pending jobs belonging to user "bob" in partition "de- bug": scancel --state=PENDING --user=bob --partition=debug Cancel only array ID 4 of job array 1237 scancel 1237_4 COPYING Copyright (C) 2002-2007 The Regents of the University of California. Produced at Lawrence Livermore National Laboratory (cf, DISCLAIMER). Copyright (C) 2008-2011 Lawrence Livermore National Security. Copyright (C) 2010-2015 SchedMD LLC. This file is part of Slurm, a resource management program. For de- tails, see <https://slurm.schedmd.com/>. Slurm is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your op- tion) any later version. Slurm is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. SEE ALSO slurm_kill_job (3), slurm_kill_job_step (3) July 2020 Slurm Commands scancel(1)
NAME | SYNOPSIS | DESCRIPTION | OPTIONS | PERFORMANCE | ENVIRONMENT VARIABLES | NOTES | AUTHORIZATION | EXAMPLES | COPYING | SEE ALSO
Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=scancel&sektion=1&manpath=FreeBSD+13.1-RELEASE+and+Ports>