Skip site navigation (1)Skip section navigation (2)

FreeBSD Man Pages

Man Page or Keyword Search:
Man Architecture
Apropos Keyword Search (all sections) Output format
home | help
SBSH(4)                FreeBSD Kernel Interfaces Manual                SBSH(4)

NAME
     sbsh - Granch SBNI16 SHDSL modem device driver

SYNOPSIS
     device sbsh

DESCRIPTION
     The sbsh driver provides support for an internal PCI modem SBNI16-SHDSL.
     A device is introduced to the OS as a common Ethernet-like network card
     which must be configured with ifconfig(8) (all standard network interface
     parameters could be set).  Modem-specific parameters (master/slave mode,
     line rate, etc.) must be set with the sb16config utility before interface
     activation.

DIAGNOSTICS
     sbsh%d: couldn't map memory
     sbsh%d: couldn't map interrupt
     sbsh%d: couldn't set up irq  A fatal initialization error has occurred.

     sbsh%d: unable to load firmware  A fatal error has occurred while
     sb16config was running.

     sbsh%d: firmware wasn't loaded  ``ifconfig ... up'' has failed because
     device has not been configured with sb16config.

     sbsh%d: transmit timeout
     sbsh%d: interrupt posted but not delivered  Probably, a hardware error or
     incompatibility.

     sbsh%d: unable to get mbuf
     sbsh%d: unable to get mbuf cluster  The driver failed to allocate a
     memory buffer.

SEE ALSO
     arp(4), netintro(4), ifconfig(8)

     ports/sysutils/sb16config

HISTORY
     The sbsh device driver first appeared in FreeBSD 4.9.

AUTHORS
     The sbsh driver was written by Denis I. Timofeev <timofeev@granch.ru>.

FreeBSD 11.0-PRERELEASE         April 11, 2003         FreeBSD 11.0-PRERELEASE

NAME | SYNOPSIS | DESCRIPTION | DIAGNOSTICS | SEE ALSO | HISTORY | AUTHORS

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=sbsh&sektion=4&manpath=FreeBSD+7.1-RELEASE>

home | help