Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

Man Page or Keyword Search:
Man Architecture
Apropos Keyword Search (all sections) Output format
home | help
SBP(4)		       FreeBSD Kernel Interfaces Manual			SBP(4)

     sbp -- Serial Bus Protocol	2 (SBP-2) Mass Storage Devices driver

     kldload firewire
     kldload cam
     kldload sbp


     device sbp
     device firewire
     device scbus
     device da
     device cd
     device pass

     The sbp driver provides support for SBP-2 devices that attach to the
     FireWire (IEEE 1394) port.	 It should work	with SBP-2 devices which the
     CAM layer supports, for example, HDDs, CDROM drives and DVD drives.

     Some users	familiar with umass(4) might wonder why	the device is not
     detached at the CAM layer when the	device is unplugged.  It is detached
     only if the device	has not	been plugged again during several bus resets.
     This is for preventing to detach an active	file system even when the
     device cannot be probed correctly for some	reason after a bus reset or
     when the device is	temporary disconnected because the user	changes	the
     bus topology.  If you want	to force to detach the device, run ``fwcontrol
     -r'' several times.

     Some (broken) HDDs	do not work well with tagged queuing.  If you have
     problems with such	drives,	try ``camcontrol [device id] tags -N 1'' to
     disable tagged queuing.

     cam(4), firewire(4), camcontrol(8), fwcontrol(8), kldload(8), sysctl(8)

     The sbp driver was	written	by Katsushi Kobayashi and Hidetoshi Shimokawa.

     This manual page was written by Katsushi Kobayashi.

FreeBSD	11.1			 May 20, 2002			  FreeBSD 11.1


Want to link to this manual page? Use this URL:

home | help