Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
sane-tamarack(5)	 SANE Scanner Access Now Easy	      sane-tamarack(5)

NAME
       sane-tamarack - SANE backend for	Tamarack flatbed scanners

DESCRIPTION
       The  sane-tamarack  library implements a	SANE (Scanner Access Now Easy)
       backend that provides access to the following  Tamarack	flatbed	 scan-
       ners:

	      Artiscan 6000C
	      Artiscan 8000C
	      Artiscan 12000C

DEVICE NAMES
       This backend expects device names of the	form:

	      special

       Where  special is the path-name for the special device that corresponds
       to a SCSI scanner. The special device name must be a generic  SCSI  de-
       vice  or	 a  symlink  to	 such a	device.	 The program sane-find-scanner
       helps to	find out the correct device. Under Linux, such a  device  name
       could  be  /dev/sga or /dev/sge,	for example.  See sane-scsi(5) for de-
       tails.

FILES
       /usr/local/etc/sane.d/tamarack.conf
	      The  backend  configuration  file	 (see  also   description   of
	      SANE_CONFIG_DIR below).

       /usr/local/lib/sane/libsane-tamarack.a
	      The static library implementing this backend.

       /usr/local/lib/sane/libsane-tamarack.so
	      The shared library implementing this backend (present on systems
	      that support dynamic loading).

ENVIRONMENT
       SANE_CONFIG_DIR
	      This environment variable	specifies the list of directories that
	      may contain the configuration file.  Under UNIX, the directories
	      are separated by a colon (`:'), under OS/2, they	are  separated
	      by a semi-colon (`;').  If this variable is not set, the config-
	      uration file is searched in two default directories: first,  the
	      current	working	  directory   (".")   and   then  in  /usr/lo-
	      cal/etc/sane.d.  If the value of the environment	variable  ends
	      with  the	directory separator character, then the	default	direc-
	      tories are searched after	the explicitly specified  directories.
	      For example, setting SANE_CONFIG_DIR to "/tmp/config:" would re-
	      sult   in	  directories	"tmp/config",	".",   and   "/usr/lo-
	      cal/etc/sane.d" being searched (in this order).

       SANE_DEBUG_TAMARACK
	      If the library was compiled with debug support enabled, this en-
	      vironment	variable controls the debug level  for	this  backend.
	      Higher debug levels increase the verbosity of the	output.

	      Example: export SANE_DEBUG_TAMARACK=4

SEE ALSO
       sane(7),	sane-scsi(5)

AUTHOR
       Roger Wolff

				  14 Jul 2008		      sane-tamarack(5)

NAME | DESCRIPTION | DEVICE NAMES | FILES | ENVIRONMENT | SEE ALSO | AUTHOR

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=sane-tamarack&sektion=5&manpath=FreeBSD+12.0-RELEASE+and+Ports>

home | help