Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
sane-ricoh(5)		 SANE Scanner Access Now Easy		 sane-ricoh(5)

NAME
       sane-ricoh - SANE backend for Ricoh flatbed scanners

DESCRIPTION
       The  sane-ricoh	library	 implements  a	SANE (Scanner Access Now Easy)
       backend that provides access to the following Ricoh flatbed scanners:

	      IS50
	      IS60

DEVICE NAMES
       This backend expects device names of the	form:

	      special

       Where special is	the path-name for the special device that  corresponds
       to  a  SCSI scanner. The	special	device name must be a generic SCSI de-
       vice or a symlink to such  a  device.   The  program  sane-find-scanner
       helps  to  find out the correct device. Under Linux, such a device name
       could be	/dev/sga or /dev/sge, for example.  See	sane-scsi(5)  for  de-
       tails.

FILES
       /usr/local/etc/sane.d/ricoh.conf
	      The   backend   configuration  file  (see	 also  description  of
	      SANE_CONFIG_DIR below).

       /usr/local/lib/sane/libsane-ricoh.a
	      The static library implementing this backend.

       /usr/local/lib/sane/libsane-ricoh.so
	      The shared library implementing this backend (present on systems
	      that support dynamic loading).

ENVIRONMENT
       SANE_CONFIG_DIR
	      This environment variable	specifies the list of directories that
	      may contain the configuration file.  Under UNIX, the directories
	      are  separated  by a colon (`:'),	under OS/2, they are separated
	      by a semi-colon (`;').  If this variable is not set, the config-
	      uration  file is searched	in two default directories: first, the
	      current  working	directory   (".")   and	  then	 in   /usr/lo-
	      cal/etc/sane.d.	If  the	value of the environment variable ends
	      with the directory separator character, then the default	direc-
	      tories  are searched after the explicitly	specified directories.
	      For example, setting SANE_CONFIG_DIR to "/tmp/config:" would re-
	      sult   in	  directories	"tmp/config",	".",   and   "/usr/lo-
	      cal/etc/sane.d" being searched (in this order).

       SANE_DEBUG_RICOH
	      If the library was compiled with debug support enabled, this en-
	      vironment	 variable  controls  the debug level for this backend.
	      Higher debug levels increase the verbosity of the	output.

	      Example: export SANE_DEBUG_RICOH=4

SEE ALSO
       sane(7),	sane-scsi(5)

AUTHOR
       Feico W.	Dillema

				  14 Jul 2008			 sane-ricoh(5)

NAME | DESCRIPTION | DEVICE NAMES | FILES | ENVIRONMENT | SEE ALSO | AUTHOR

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=sane-ricoh&sektion=5&manpath=FreeBSD+12.0-RELEASE+and+Ports>

home | help