Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
sane-nec(5)		 SANE Scanner Access Now Easy		   sane-nec(5)

NAME
       sane-nec	- SANE backend for NEC scanners

DESCRIPTION
       The  sane-nec library implements	a SANE (Scanner	Access Now Easy) back-
       end that	provides access	to NEC SCSI scanners.  This backend should  be
       considered alpha-quality	software!  In the current state	it is known to
       work with PC-IN500/4C scanners. Another MultiReader scanner  series  is
       not  supported.	PC-IN  500/4C and MultiReader scanner are only sold in
       Japan.(except Multi Reader PetiScan.)

       For other scanners, it may or may not work.

       The backend has the following known problems:
	      -	ColorLineart mode is not supported.
	      -	device name is fixed to	/dev/scanner

       At present, the following scanners are known to work with this backend.
	      Vendor Product id
	      ------ -----------
	      NEC    PC-IN500/4C

FILES
       /usr/local/etc/sane.d/nec.conf
	      The backend configuration	file.

       /usr/local/lib/sane/libsane-nec.a
	      The static library implementing this backend.

       /usr/local/lib/sane/libsane-nec.so
	      The shared library implementing this backend (present on systems
	      that support dynamic loading).

ENVIRONMENT
       SANE_DEBUG_NEC
	      If the library was compiled with debug support enabled, this en-
	      vironment	variable controls the debug level  for	this  backend.
	      E.g.,  a	value  of 128 requests all debug output	to be printed.
	      Smaller levels reduce verbosity.

SEE ALSO
       sane(7),	sane-scsi(5)

AUTHORS
       Kazuya Fukuda

				  14 Jul 2008			   sane-nec(5)

NAME | DESCRIPTION | FILES | ENVIRONMENT | SEE ALSO | AUTHORS

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=sane-nec&sektion=5&manpath=FreeBSD+12.0-RELEASE+and+Ports>

home | help