Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
sane-microtek(5)	 SANE Scanner Access Now Easy	      sane-microtek(5)

NAME
       sane-microtek - SANE backend for	Microtek scanners

DESCRIPTION
       The  sane-microtek  library implements a	SANE (Scanner Access Now Easy)
       backend that provides access to the "second generation" Microtek	 scan-
       ners.   At  present,  the following hardware is known to	work with this
       backend:

	      Microtek ScanMaker E2, E3, E6
	      Microtek ScanMaker II, IIG, IIHR,	IISP, III
	      Microtek ScanMaker 35t, 35t+, 45t
	      Microtek ScanMaker 600GS,	600ZS (see bug notes)
	      Agfa StudioScan
	      Agfa StudioScan II, StudioScan IIsi
	      Agfa Arcus II (but not the "Arcus")
	      Agfa DuoScan (preliminary)
	      Vobis "Highscreen	Realscan"
	      Microtek Color PageWiz (preliminary)

	      Transparent Media	Adapter
	      Document AutoFeeder

       The driver supports line	art, halftone,	8bpp  gray,  and  24bpp	 color
       scans  at  normal and "expanded"	resolutions (i.e. 1200x1200 on an E6),
       fast scans for color previews, and downloadable gamma tables.

       The supported scanners are all SCSI scanners.  However,	some  parallel
       port  models  may work (under Linux), if	they use a parport->scsi chip,
       and if you can find a scsi->parport driver.  This is known  to  be  the
       case for	the Color PageWiz.

       The  driver  does not support the newest	Microtek scanners, such	as the
       V330 and	V660, which use	a new and very different SCSI-II command  set.
       For those, try the alternate microtek2 backend.	Most non-SCSI scanners
       would use the new command set.  Most scanners newer than	the  Scanmaker
       E6 would	use the	new command set.

       If you own a Microtek scanner other than	the ones listed	above, tell us
       what happens ---	see the	BUGS section at	the end	of this	document.

       Although	this manual page is generally updated with each	 release,  up-
       to-date	information  on	 new releases and extraneous helpful hints are
       available from the backend homepage:
	      http://www.mir.com/mtek/

DEVICE NAMES
       This backend expects device names of the	form:

	      special

       Where special is	the UNIX path-name for the special device that	corre-
       sponds  to the scanner.	The special device name	must be	a generic SCSI
       device or a symlink to such a device.  Under Linux, such	a device  name
       could be	/dev/sga or /dev/sge, for example.

CONFIGURATION
       The  contents  of the microtek.conf file	is a list of device names that
       correspond to Microtek scanners.	 Empty lines and lines starting	with a
       hash mark (#) are ignored.  A sample configuration file is shown	below:

	      /dev/scanner
	      #	this is	a comment
	      /dev/sge

       The configuration file may also contain the special tokens norealcal or
       noprecal.  norealcal will disable the use of magic, undocumented	 scan-
       ner calibration commands	which are known	to work	on the E6, but may not
       work with other models.	noprecal will disable  logic  which  tries  to
       avoid  scanner  precalibration.	 This logic would only have been acti-
       vated if	the magic calibration code was turned off.

FILES
       /usr/local/etc/sane.d/microtek.conf
	      The  backend  configuration  file	 (see  also   description   of
	      SANE_CONFIG_DIR below).

       /usr/local/lib/sane/libsane-microtek.a
	      The static library implementing this backend.

       /usr/local/lib/sane/libsane-microtek.so
	      The shared library implementing this backend (present on systems
	      that support dynamic loading).

ENVIRONMENT
       SANE_CONFIG_DIR
	      This environment variable	specifies the list of directories that
	      may contain the configuration file.  Under UNIX, the directories
	      are separated by a colon (`:'), under OS/2, they	are  separated
	      by a semi-colon (`;').  If this variable is not set, the config-
	      uration file is searched in two default directories: first,  the
	      current	working	  directory   (".")   and   then  in  /usr/lo-
	      cal/etc/sane.d.  If the value of the environment	variable  ends
	      with  the	directory separator character, then the	default	direc-
	      tories are searched after	the explicitly specified  directories.
	      For example, setting SANE_CONFIG_DIR to "/tmp/config:" would re-
	      sult   in	  directories	"tmp/config",	".",   and   "/usr/lo-
	      cal/etc/sane.d" being searched (in this order).

       SANE_DEBUG_MICROTEK
	      If the library was compiled with debugging support enabled, this
	      environment variable controls the	debug level for	this  backend.
	      A	 value of 128 requests maximally copious debug output; smaller
	      levels reduce verbosity.

SEE ALSO
       sane(7),	sane-scsi(5)

AUTHOR
       Matt Marjanovic

BUGS
       Known bugs/limitations are:

	      Brightness and contrast broken.
	      The 600GS	is grayscale only, and will  lock  up  if  you	select
	      color.   (Unfortunately,	the 600GS and 600ZS are	indistinguish-
	      able by software.)

       i.e. don't complain about these --- but if brightness  and/or  contrast
       do work for you,	please tell me.

       If  your	scanner	locks up, try setting the norealcal or noprecal	option
       in the configuration file (first	one, then both), and see if it	helps.
       (If it does, report it.)

       Send   lengthy	bug   reports	and   new   scanner   information   to
       mtek-bugs@mir.com.  All bug reports and new  scanner  inquiries	should
       include	an  error log file.  You can generate copious stderr output by
       setting the SANE_DEBUG_MICROTEK environment variable  described	above.
       For example:

	      setenv SANE_DEBUG_MICROTEK 128

       More  general  comments,	 suggestions, and inquiries about frontends or
       SANE should go to sane-devel@lists.alioth.debian.org, the SANE Develop-
       ers  mailing  list.  Have  a  look at http://www.sane-project.org/mail-
       ing-lists.html concerning subscription to sane-devel.

				  13 Jul 2008		      sane-microtek(5)

NAME | DESCRIPTION | DEVICE NAMES | CONFIGURATION | FILES | ENVIRONMENT | SEE ALSO | AUTHOR | BUGS

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=sane-microtek&sektion=5&manpath=FreeBSD+12.0-RELEASE+and+Ports>

home | help